Please update lenovo... Firmware...

Similar Questions

• USRP RuntimeError: Please update the firmware and FPGA images for your device.

  Hello

  I have an Ettus USRP N210 with a surfboard RF WBX running FPGA firmware version 4.

  2009 LabVIEW and NOR-USRP 1.1

  When I try to run one of the USRP VI OR as devices to find it displays the following error code:-1074118627

  "niUSRP Devices.vi finda length or configuration error has occurred."
  Code: 1440
  Details: RuntimeError:
  Please update the firmware and FPGA images for your device.
  See application for USRP2/N-Series notes for instructions.
  Compatibility of the Protocol expected number [7-11], but received 12:
  The version of the firmware is not compatible with the host code generation. »

  I can communicate with unity on Linux using UHD machine and the utility Configuration NI USRP can see the device, but firmware update is not possible, probably because of my IP ending in 221. Latest firmware Ettus was recharged via Linux UHD.

  Looks like my firmware again? I am not allowed to download the old versions of the FPGA firmware.

  Can someone help me with this problem please?

  With respect,

  -Sigurd has.

  Hello Sigurd,

  The NOR-USRP driver requires a specific firmware and FPGA image to be downloaded to the USRP to exploit.

  You can use the utility of Configuration USRP download appropriate firmware and FPGA image to the usrp.

  This knowledge base article will help you: how update the Firmware and FPGAS Images for N2xx and NI 292 x USRP

• Update the Firmware on CP 1525nw

  "I've set up eprint and when finished I got message that says"

  EPrint to ensure your service is not interrupted, please update your firmware to www.hp.com/go/eprint.  When I choose Windows as an operating system it downloads something, but when I try to run it, it says cannot delete the output file?  I have cycled the printer on and outside and tried this operation several times with the same result?

  Please notify.

  Hey dgaraux!

  Have you ever ePrint to the printer? If so, you probably already have the update of the firmware.

• Update to firmware version 4.1.110.33149 for lenovo iomega ix2

  Hello

  I would like to update the firmware for the iomega ix2 lenovo to version 4.1.110.33149. Approximately how long it will take and will be my network settings be brought back?

  Thank you

  James

  Hi jamescheung,

  The update does not change the configuration settings, and the process will probably take about 30 minutes.

• How can I update the firmwar in the tv 48T5445DG?

  Hallo,
  According to Overview_direct_updates_for_end_customers_worev.pd f, I downloaded yesterday, the latest firmware for my Toshiba 48T544DG is Version 3.6.3c.
  By TV now has:
  Softwareaktualisierung V.3.6.0.b
  SoftwareVersion V.3.3.6k
  I tried pressing the button OK on Softwareaktualiserung, but he told me, that software is up-to-date.
  It does not try to update on the Astra satellite.
  I also tried on the portal page, but did not find any option to update the firmware.

  So my questions:
  s ' Please explain step by step on how to upgrade the firmware
  -What are the parameters of sat/transponder update by Sam currend?
  -would be even better, if the update would be possible by download and USB
  -It would also be good to know what has been fixed.

  Main reason for me to update the firmware, is that the remote control react also on order remotely from other devices. For example, sat-receiver and amplifier. Here are other manufacturers. Thince each manufacturer shall forward its own specific code, it seems to be a bug in the TV. (Regardless of manufacturer - a part of the signal of the remote control code). I hope that this could have been fixed.

  Hallo,
  According to Overview_direct_updates_for_end_customers_worev.pd f, I downloaded yesterday, the latest firmware for my Toshiba 48T5445DG is Version 3.6.3c.
  By TV now has:
  Softwareaktualisierung V.3.6.0.b
  SoftwareVersion V.3.3.6k
  I tried pressing the button OK on Softwareaktualiserung, but he told me, that software is up-to-date.
  It does not try to update on the Astra satellite.
  I also tried on the portal page, but did not find any option to update the firmware.

  So my questions:
  s ' Please explain step by step on how to upgrade the firmware
  -What are the parameters of sat/transponder currend update satellite (Astra / Hotbird)?
  -would be even better, if the update would be possible by download and USB
  -It would also be good to know what has been fixed.

  Main reason for me to update the firmware, is that the remote control react also on order remotely from other devices. For example, sat-receiver and amplifier. Here are other manufacturers. Thince each manufacturer shall forward its own specific code, it seems to be a bug in the TV. (Regardless of manufacturer - a part of the signal of the remote control code). I hope that this could have been fixed.

  Thanks for your help

• Gigashot K40HE - update the firmware on the SD card does not work

  Hello

  IBought a Gigashot K40HE 2 years and everything was good until he stopped keep the date in mind.

  I had the assistance of Toshiba phone told me to update the firmware with the following procedure:
  1. prepare a formatted, empty SD card.
  2. Insert an SD card to the card reader. Copy the firmware file
  (file name must be "psd.bin") in the SD card. Make sure that the new firmware file is copied to the SD card.
  3. Insert the SD card into the DV.
  4. Insert the battery in the DV.
  5. Insert the adapter in the DV. (dual power supply)
  {color: #ff0000} 6. press on "Power button" to power. Then the LCD displays 'FWUPDATE YES OR NO'. Select "YES".
  and press 'OK '. The DV will update automatically the FW. {color}
  7. after that the FW update completed. LCD display will show "OK". And then, will auto power off.

  Everything was good until 6... The DV starts as shown. It justs starts normally, asking me to set the date as every time I turn on my DV.

  I tested with a SD card that usually work on other devices, so I guess that the card is not defective. It's a card SD transcend 1 GB 45 x. And I know that the card is seen by the DV, because it creates folders on it for recording photo or video.

  Has anyone an idea to help me sort this out?

  Best regards
  Ozhades

  Hello ozhades,

  before you start an update of the firmware, it is very important the battery completely full.

  After the battery is fully charged please do the fw update again.

  Best regards

• Satellite C670 - update the firmware on the CD-Rom drive

  Hello!

  I have a Toshiba Satellite C670. I want to upgrade the FIRMWARE driver for the optical unit.
  Please tell me where I can get the update.

  Features dvd / cd-rom:

  DVD RW: TSSTcorp CDDVDW Ts-L633A TO01

  Version: 6.1.7601.17514
  class CD-ROM
  Manufacturer: "Standard CD-ROM drives"
  OS: Windows 7 64-bit

  Please to help.

  Greetings

  You can update the firmware ONLY if the most recent version has been released for this drive.

  There was an update firmware for CD/DVD players * TS-L633C * and * TS-L633Y * as shown here:
  http://APS2.toshiba-tro.de/KB0/TSB9C02RP0000R01.htm

  But for * TS-L633A * there is NO firmware update available.

• Update the firmware without success

  Help!

  I updated the Firmware of my CLJ2840 all in one and the device is now insensitive:

  Device: HP CLJ 2840

  Installation: network printer

  OS: Win 7

  Drivers: Installation of the Standard Win 7 drivers

  I downloaded the file 2800_Series_FW_Update - 20120307.exe on the HP support site.

  I followed the instructions to the letter.

  I waited for the installation of the firmware to complete in its entirety

  I have noticed the messages shown on the device LED panel that followed the procedure.

  I noticed the face smiling at the end of the installation on the computer

  Result:

  Feature cycles as follows:

  1 turn on

  Toner of cycle 2 drums as usual

  3 LED panel shows marks in the upper part

  4 LED flashes once and 3 LED bars begin to scroll from right to left...

  5 witness bright and alert light stay lit

  6 this continues for about a minute... then the cycles of line 3... over and over again

  The device is no longer visible on the network

  HOWEVER

  Even invisible on the network, I managed to run the program from firmware to success... a second time.

  Help, please!

  Our office is stuck without this printer.

  Thank you

  Hey Rota, the product that you have is a printer. These commercial products can be a little tricky. For the best chance of finding a solution, I would post in the forum for HP Business Support.

  You can find the Board Commercial LaserJet here:

  Business - LaserJet HP Support Forum

  Take care!

  Sean

• Impossible to connect incompatible devices. Please update all obsolete devices

  I recently got the trio kit with two DM100 and the wireless controller.

  Linksys Easy Link Advisor (LELA) does not install the controller, but it could be manually installed with most of the features.  (under windows xp 64)

  For the moment, I get the error "failed to connect incompatible devices. Please update all outdated devices' when I try to link my areas named player1 and Player2 for mode of the game.  When you view the details they show versions of different firmware (1.7.3 and 1.23.31).  I tried to update, but they appear as completely redrawn in LELA.

  How can I force an update of the firmware? I did a search, and the help file has been of no use. There is also no download available.

  For the next gen of linksys acoustic equipment, how about a webconfig/telnet standard where I can set a static IP for the wired connections and wireless?  Finally, I hope to launch wireshark and see how it works, because the system is cumbersome in its current state.

  Basically, leave it turned on, connected to the internet over the weekend.

  Another user also mentioned:
  You can force the update to occur by using the Media Center software.
  1 open media center software
  2. the mouse on the window of the player DMP-100 and made right click for the menu
  3 select all to see the current version of the software and the option to update.

  I did, and it updated... eventually.  Took a day to the next (> 3 hours), and there was no feedback / recommended user that the command has been received/treaties/completed.

• 'Fatal error 65' when you try to update the firmware of the printer

  The printer firmware update fails with 'error 65' displayed on the screen of the printer.

  I have the HP LaserJet Pro 200 M276nw MFP color, just one month outside the window of the guarantee. Downloaded the latest version of the driver M270_colorMFP_Series_FW_Update - 20140718.exe and followed the instructions on how to upgrade.

  The computer running the installation displays no error and I get the face smiling at the end. However, the printing configuration always displays the old driver from 2012. Also, the printer display does not progress as stated in the manual of stable employment. On the contrary, at some point it displays 'Error 65' and then restarts.

  How can I update the firmware?

  Please try to use the 20140521 version only, I currently have audit whitin HP why 2 different firmwares are posted and will let you know once I'll get an answer... for now please DO NOT try to install the 20140718 version...

  Shlomi

• LaserJet MFP M127fn Pro: Unable to update the firmware on M127fn

  Hi and thanks for the support.

  I can't update the firmware.

  I downloaded firmware update and it launched.

  It does not find the printer.

  I'm sure that the rated requirements.

  I can print.

  It is turned on and connected via USB.

  He does not sleep.

  There seems to not be any error/malfunction.

  I tried as an administrator.

  I have some unrecognized devices in Device Manager. Perhaps, which could be related? Something with the USB drivers, maybe?

  Hi mightyiam ,

  Thanks for letting me know. Since you are able to print with the older USB cable, it should not be a problem. Now if you had intermittent printing problems, then it could very well be caused by the cable. If you have a spare a kicking around, you could try, just to exclude.

  As the firmware will not update, I suggest to call our technical support at the 800-474-6836 and inquire about a replacement printer. If you don't care to worry about the update of the firmware, you can decide what you want to do. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Thank you.

• Installed the wrong update of Firmware for my HP Laserjet 1102w

  There are two updates of firmware for the HP 1102w. An upgrade of the printer with Eprint mobile printing, and the other upgrades the printer with AirPrint services. Of course, I installed the wrong (eprint) and now the update of the firmware for AirPrint will not be installed because it says that the firmware is up to date. Does anyone know how to restore the firmware so that I can install the firmware with the features I want?

  Hello

  Any firmware update providing the last additional functionality and any previous firmware fixes as well.

  The latest firmware is version 20110826.

  Please print a configuration page holding the Cancel button for several seconds.

  I think that you should have the latest firmware now and should be able to use the Airprint feature.

  Check that your printer is connected to the same network of your iDevice and following the steps below:

  http://support.HP.com/us-en/document/c02623193

  Please let me know of any questions,

  Shlomi

• HP P1102 turns off after 4 hours since the last update of firmware - stop it turn off?

  I have updated the firmware and my printer drivers for the last realease (17/10/2012) on my P1102 printer. The printer now turns off completely after 4 hours. I changed the setting in the driver to "never turn off" but it makes no difference. It's a big problem that I use the PC connected to the printer via remote access and so I can print is no longer when I want to. How I either restore the firmware or stop the printer turn off please? Since the firmware update, I noticed also that when the printer goes to sleep the green light will blink each opten both before the firware update lights exploded when the printer has gone to bed. Can someone help please...

  Thanks in advance

  Hoddy

  Hi Hoddy,

  Follow the steps outlined in the document below. Let me know if this helps you?

  Auto shut-off delay time is too short

• Update of Firmware SG200-08/ssl

  Hello, I recently bought the SG200-08 and I was wondering if/when there is another update of firmware coming for the switch that I bought.  I noticed there is no SSL protocol which I can't understand why Cisco has decided to not include the switch.  I would also like to be able to configure SNMP on the switch, but from what I can tell, it cannot connect to a server which is what I need.  I would like to know if these are features coming to SG200-08 or if I just need to buy a new switch that I prefer not to have to do.

  Thanks for your time,

  karlribble

  Hello

  SG200-08 is the little brother of the 200 series of switches and as such it has all of the features contained on everything on the other series. This device is not supported on a SSL server or an external SNMP server, but through any other model on the series.

  The administration guide for the switches of the SG200 series which shows the configuration of the Server SNMP and SSL are:

  http://www.Cisco.com/c/dam/en/us/TD/docs/switches/LAN/csbss/sf20x_sg20x/...

  Also, here is a link to an emulator for an another SG200 online so that you can see all the features:

  http://www.Cisco.com/assets/Sol/SB/SG200_Emulators/SG200_Emulator_v1-2-9...

  At present, there is no information indicating that this characteristics must be included in a new version of the firmware.

  Please do not forget to mark a response as correct if it was useful for you, so that other members can benefit from.

  I hope this helps.

• Update the Firmware on SG200-18

  I need to update the firmware on the SG200-18 to the latest version. Which of these links, and subsequently, what file I need to download for that (I just need English)?

  http://software.Cisco.com/download/type.html?mdfid=283783779&flowid=24309

  Thank you!

  Hello

  You are in the right place, you want to select the SMART switch firmware.  The MIB are SNMP, so you don't need to enter those unless you have to.  Once you click on the scroll to the bottom of the list and select:

  SX200 Firmware Version 1.3.7.18 
  sx200_boot - 13506.rfb

  and

  SX200 Firmware Version 1.3.7.18 
  sx200_fw_1.3.7.18.Ros

  You will need to update the firmware as well as the startup code.  I suggest doing both and then just restart once.  Note that the startup code requires TFTP to transfer, I usually use TFTPD32 for this.

  We also have a little longer then usual for the switch to reboot when first upgrade you the firmware, because it made some changes to the file system internal to the switch. If you are comforted in you can watch the progress.  Once you start to feel it takes too much time, wait a few minutes and it should come up (I waited for a good number of these improvements in the laboratory).

  Hope that helps,

  Christopher Ebert - Advanced Network Support Engineer

  Cisco Small Business Support Center

  * Please note the useful messages *.