Please wait for the customer to political group - stop questions

Similar Questions

• remote desktop hang at 'Please wait for the system event notification' during logoff

  When I disconnect a remote connection, sometimes the GET logoff screen stuck at "Please wait for the system event notification" next time I try to open a session.
  This can also happen if that I disconnect the user, but the user seems to weigh on this same screen as well.

  There is a particular difficulty for this?  I can connect as long as administrator to another account, I can't kill connection attached somehow to be registered in the next time?

  Thank you

  Hello

  I suggest you to take a look at the answer in this thread and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/Sens-could-not-connect-to-the-system-event/4e5a04e9-88f8-4017-9416-2ca67c5ce7c5

  Hope this helps,

• Start stuck on "Please wait for the Local Session Manager."

  I would say that this problem started a couple of days. Went to start my laptop (Toshiba) and he sat on the "Please wait" message forever.

  Had no problems to start in safe mode. Looked up various ways of addressing the problem.

  Was able to change the resume date and back a few weeks ago. Still no luck. Happened to read something on a printer Epson being perhaps the problem driver (it was installed a day before the date of restoration chosen). Uninstalled the drivers, computer still does not start.

  Tried restarting running. I do not have the CD it came with Vista, but it was an option when you hold F8 during startup (I think?) Couldn't find any problems.

  Ran check on memory. No problem either.

  Changed settings for a verbose startup and ran a Diagnostic startup - all good for this. Then tried selective startup load system services... This is when the error occurs. When starting, it hangs on "Please wait for the Local Session Manager" and does nothing more.

  I looked in the event viewer to see what came that time and a couple mistakes were:

  Event ID 6000: winlogon notification subscriber was unavailable to handle a notification event.

  Event ID 7026: the next (s) start or start failed to load system
  spldr
  Wanarpv6

  It would be very useful for me not having to run my computer in safe mode automatically all the time, although it is useful that I at least have that option. Any help is greatly appreciated.

  Hello

  1. by chance your computer is connected to a domain environment?

  2. as you mentioned in your article that you tried the selective startup, I want to confirm if you have disabled the services left 3rd after hide Microsoft services?

  If you did not disable these services make sure you disable and then check if it works.
  See the article below for more information.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Please wait for the system event notification service 2008 r2

  Hello

  In windows server 2008 r2 error system 'Please wain for Server 2008 R2 system event notification' logoff or restart the system.

  Please inform has the solution for this.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Please wait while the document is being prepared for reading

  I just upgraded to Acrobat Pro DC. I now get the following on some of my documents error message: "Please wait while the document is being prepared for reading". For a large document, it takes a desperately long time to read all the pages. And the message appears whenever I open it.

  I tried to get help from a support technique cat last night. I was told that I could go back to the latest version of Acrobat Pro. It is a sad reflection on the company.

  I really don't like something on the DC, but I know that most of the problems will be fixed within the time with updates.

  Thanks for any help,

  Todd Daniel

  Hi Todd,

  Please try the step mentioned in the KB: https://helpx.adobe.com/acrobat/kb/message-content-preparation-progress-opening.html

  Kind regards

  Rave

• During upgrade Adobe Creative Suite CS4 ME in Adobe Creative Suite CS5.5 Design Premium, I get an error saying that the serial number is not an eligible product, please try another. I used to be able to get a code for the customer service, but I can't

  During upgrade Adobe Creative Suite CS4 ME in Adobe Creative Suite CS5.5 Design Premium, I get an error saying that the serial number is not an eligible product, please try another. I used to be able to get a code for the customer service, but I can't chat. Please advise!

  MoeGhazal I have reviewed your account and it seems that you have upgraded to a volume license CS4 Design Premium for an upgrade of retail Design Premium 5.5.

  I also shows that you have made two purchases of CS5.5 Design Premium, but the second purchase was cancelled.  Make sure that you use the serial number that ends in 7886.

  If you are using the correct serial number, then it is likely, that the installer won't recognize your serial number of volume license CS4 as being valid for upgrade.  If you can contact our support team you can be traversed through an unlocking procedure to allow you to proceed with the installation.  You can contact our team of support directly in Contact with the customer.  You can try to install a web browser, you have not previously used.  It of probably a toolbar or other software applications affect your ability to access the media cat successfully.

  If you are unable to reach our support team, then please check your account information is accurate.  If you can please then update this discussion after the confirmation of this so I can ask a member of our support team contact you directly.

  I would recommend again reaching out directly if possible it will be the most effective method to resolve your current error.

• uninstalled applications, received message: Please wait until the current program has finished uninstalling or one. After several reboots, still same message.

  Original title: 2 numbers do not know if they are related

  I have 2 questions and I don't know if they are related. Several days ago I was doing some cleaning and uninstalling programs to free up space. I don't know what I started with, but it seemed to go ok. However, after all that I've tried to uninstall gave me the message: Please wait until the current program has finished uninstalling or one. I rebooted the computer more than once during this period, but it still says that.

  Then my internet explore has stopped working just for 2 or 3 days. I've been using google chrome to access things, but it is rather slow.
  I ran repeated virus and malware scans my norton security and the microsoft Web site, and all said I am clean.

  Yes, it's windows 7 I appreciate the suggestions, but the problem was that he wouldn't LET me not uninstall anything. He gave me the waiting message please do anything, and he's not missing if I stopped and restarted. Finally, I gave up. I saved my files to my external hardrive and just do a full recovery of the computer. He solved the problem of installed programs and the internet problem explore both, although I hoped it would avoid going that drastic.

• Delay (30000 milliseconds) waiting for the SNMP service to communicate.

  When I start the SNMP service in Windows Server 2003 Enterprise 64-bit (SP2), the event ID 7009 (Timeout (30000 milliseconds) waiting for the SNMP service to communicate.), kindly help me to solve this problem.

  Hello

  Note that your computer is under domain, you must contact the TechNet forum, where we are the support technicians who are well equipped with knowledge on the issues of domain, do please visit the link provided below.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• Please wait until the installer finishes determining your disk space requirements

  I have a windows Xp, Im trying to download Windows live sign in assistant. It seems to be stuck in (Please wait until the installer finishes determining your disk space requirements) I'm not quite sure what to do, Ive has been looking for an awnser for quite awhile. Im trying to download a game called also age of empires online. If there is a way I can by pass this dl all together that would be even better. I just went to re - install the program and this is the link ( http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=15106 ), it is not windows 7 but I'm not sure if it would work for my windows Xp. This link pop when I run the games for windows marketplace... Thanks - Matt...

  Well, I had it works for me without re doing not, but by going to my downloads and put back on the download I re install a couple of times and the same results, once I started it of my downloads, it worked like a charm! Hope this helps someone out there.

• HP 15 Notebook PC L3Q92EA #ABU: HP Pavilion, 8.1 Win "Please wait" when the unlock screen saver

  Just bought an HP 15 Win8.1 running laptop.  I think it's a huge pain to use.  Once the screen lock is committed, it takes forever to get the login screen to appear.

  I move the mouse or press a key to get the screen to go back, but I see is the screen "Please wait" for more than a minute then a background appears.  Click the mouse and I have one more minute of "Please wait" before the logon screen appears.

  Can anyone help, until the laptop goes through the window?

  Hello

  Thanks for posting your concern on the Forums for Support and sorry about the problem you are having. I went through your post and it sounds like I should be able to help with the problem.

  I suggest you perform the test (Test of the HARD disk) on the computer. Follow the steps below-

  • Switch off the appliance.
  • To turn back press the power button and as soon as you release, keep pressing the "ESC" key, unless a screen comes up, you might want to wait a minute while tapping the button.
  • In the start menu, choose F2 - System Diagnostics.
  • HDD test would be under the Test component. (usually, it is recommended to test rapid and wide, but for now because the PC is new I rather suggest you simply run the Quick Test).
  • After you choose the Quick Test, click on run once.

  If he succeeds, you can proceed with the recovery, part if she fails to give a call to tech support at the number mentioned below, since the unit is under warranty, you should be able to get help to get the drive replaced.

  On the recovery procedure, its complete restoration of unit settings factory which means that the data on the computer is cleared and with it, the software that can be installed on it. Please follow the steps below to perform recovery-

  • Switch off the appliance.
  • To turn back press the power button and as soon as you release, keep pressing the "ESC" key, unless a screen comes up, you might want to wait a minute while tapping the button.
  • In the start menu, choose F11 - system recovery.
  • On the next page of options, you can choose - "troubleshooting." (If it is a unit of windows 8, or you can skip this step)
  • On the next page, you will need to choose "Recovery Manager". (If it is a unit of windows 8, or you can skip this step)
  • On the next page in the first column, under "I need help immediately", you must choose "Reduced Image Recovery"
    • Now, here, you can get an option to backup your files, because it would be an option to say - recover after saving files or recover without backup of data.
    • You will need to insert the disc followed the screen - instructions here on and unit should be returned to its original state.

  Now if you need help email us back or call HP SUPPORT @ 1-800-474-6836 [24/7 SUPPORT].

  Although I work for HP, but I am personally.

  Please click "Accept as Solution" If you feel my post solved your problem, it will help others find the solution. Click on the 'Bravo Thumbs Up' on the left to say 'Thank you' for helping!

  Concerning

  Aks3621

• Message "Please wait until the current program is finished uninstalling" or that when the uninstall a program

  Original title: Uninstalling questions

  The problem is when I try to uninstall any program I get a pop up message saying "Please wait until the current program is finished uninstalling" or that did not uninstall or change a program for months! Any ideas would be appreciated

  Hi Martin,

  This error message is related to the windows service installed on the computer.

  Before you begin to solve the problem, I recommend to restart the computer and verify if you are able to run the program.

  If the problem persists, I suggest you follow the provided methods to solve the problem.

  Method 1

  Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:

  (a) click on Start Menu

  (b) type msiexec /unreg , and then press ENTER.

  (c) click on Start Menu

  (d) type msiexec/regserver , and then press ENTER.

  Method 2

  If the previous step fails, check if it has all the facilities waiting on the computer using the registry.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see the link below.

  Back up the registry

  For Vista: Back up the registry:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Empty registry key "in progress"
   
  Check the following registry key:

  HKLM\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress

  Empty/rename "PendingFileRenameOperations" registry key

  Check the following registry key:

  HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\PendingFileRenameOperations

  Hope this helps; Please get back to us with the results.

• "operations are underway. Please wait. The machine switches off automatically '-system never stops.

  Sometimes, when to stop Vista, instead of a normal shutdown, I get quite common background and a message reading: "operations are underway. Please wait. The machine switches off automatically. "The system then continues to run indefinitely, and I finally have to do an emergency stop. After the reboot, I then most of the time have to do a restore to an earlier point; Once in a great while, he'll tell me the test stops abnormally and charge really. Tried to figure what could be causing it and can't find a logical reason. Diagnosis never found anything, but there is not really anything in the windows which diagnosed something as a shutdown of the system.  Help.  It's boring.

  Hi Baron Stewart,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  Method 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the mouse and keyboard and then try to stop

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Method 2:  Select the boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  
  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 3: check the logs in Event Viewer for more information on this problem

  Open event viewer

  What are the information in event logs? (Event Viewer)

• A timeout occurred while waiting for the host controller EHCI interrupt on answer Async ahead Bell.

  Whenever I put my adapter wireless netgear n150 under heavy load (download of World of Warcraft for example), it will go down to connection and until I restart the computer the adapter usb port is useless.  I dug into the event viewer and found that a timeout occurred while waiting for the EHCI host controller interrupt on the asynchronous response advance doorbell, source usbehci.  This seems to have been a problem with windows 8 I found other threads referencing but I can say that they are pre-release and some actually work solutions have been validated.  I already assured that all drivers, firmware and chipsets are up-to-date and compatible.  ANYONE please help?

  Quick fix I found:

  -try falling back to WiFi G rather than use N
  In my case, it works... is no longer a fall. But not the same bandwidth...

• trying to cancel my plan, how do hard, would facilitate respect for the customer, it is a parody

  trying to cancel my plan, how do hard, would facilitate respect for the customer, it is a parody

  Hello

  Please contact support by calling/chat for cancellation requests and billing queries:

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  You can also check the help below document:

  https://helpx.Adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  Please go through the Adobe - General conditions of subscription as well.

  Kind regards

  Sheena

• I bought adobe illustrator and waiting for the e-mail so I can download it but it does not appear

  I bought adobe illustrator and waiting for the e-mail so I can download it but it does not appear

  Hello

  I don't see no active membership/registration under the Adobe Id on the forums.

  Please confirm if there is any other Adobe Id in which you may have subscribed.

  Kind regards

  Sheena