plot of color

Hello

I want to do all my black plots, when I do this in my VI running, get errors, because the number of plots is not always the same... So I made a table to initialize and then try to colorize my plots, but it won't work...?

Anyone?

Hello Thijs,

Please do not forget to transpose the 2D table, otherwise you will read the wrong table.

Tags: NI Software

Similar Questions

  • Graph plot legend colors Signal not updated when mixed with the property node

    Hello

    We try to put the colors of the trace of a graph of Mixed Signal using a property node. Although we can change the color of the data in the field correctly, the colours of the plot in the legend do not change until some apparently unrelated operator action is performed (for example, to resize the window or by double-clicking a field name).  Waveform to XY charts don't seem to have this problem.

    Anyone know a work around?  I think I saw a similar topic on the forums earlier, but I'm sorry that I am unable to find it now

    See attached vi.

    Thank you

    -john

    I should probably have joined the last post of VI, but I have has been a thread of error between the two loops.  I also deleted the text you had so I could see the I need to press the button.

  • Set the name of a Visible plot and color lines draw graphic legend of XY

    Hi all

    Updated 20 plots data on that and I'm initializing the XY graph with 20 plots.

    After update of data, I do draw 3 to invisible, now I need to trace the legend to organize such that he should have, plot 0, plot1, plot2, plot4, plot 5... plot19, in the legend of his plot and should not have Plot3.

    So while graphic print and consult the chart in pdf format, I can see field only for Visible names draw in the legend of the plot and can avoid the confusion of having plot3 in my graphic impression. (Given that this parcel is invisible and data used pot in chart 3 and so I do not have this as my as well catalogue)

    Is there are ways of achieving them, please send your suggestions.

    Thank you

    Stéphane

    You can set the colors of the plot, point style, etc. by program like I did with the name of the parcel. The colors are just an extension of the notion that I have used with the array of names.

  • Point cloud: color gradient

    Hello

    I can't find an example where I can create a custom class plot. I have to be able to line the plot of color based on the value of Y and make it look like a smooth gradient. Ideally, I would like to change the size of the line as well. This would allow me to "draw" the 3 variables using a 2D graph. I started (VB.Net):

    Imports NationalInstruments.UI

    Public Class clCustomPlot

    Inherits from point cloud

    Public Sub New()

    MyBase.New)

    End Sub

    Protected / Sub OnBeforeDraw(ByVal sender As Object, ByVal e As NationalInstruments.UI.BeforeDrawXYPlotEventArgs)
    End Sub

    End Class

    But VS tells me that:

    Void of MeasStudioGraphLineColour error 'OnBeforeDraw' cannot be declared 'overrides' because it does not replace a sub in a base class.
    Thanks for your help,

    Nicolas

    I got it to work! For all those who are interested, here's a VB.Net custom dispersion diagram that will show you how/color along the line of control.

    Imports NationalInstruments.UI

    Imports System.Drawing

    Imports System.Drawing.Drawing2D

    Public Class clCustomScatterPlot

    Inherits from point cloud

    Private dblMin As Double

    Private dblMax As Double

    Private colMinColour As System.Drawing.Color

    Private colMaxColour As System.Drawing.Color

    Public Sub New (ByVal MinValue As Double, ByVal MaxValue As Double _)

    ByVal MinValueColour As System.Drawing.Color, ByVal MaxValueColour As System.Drawing.Color)

    MyBase.New)

    "no check is performed for the fact that MinValue<>

    dblMin = MinValue

    dblMax = MaxValue

    colMinColour = MinValueColour

    colMaxColour = MaxValueColour

    End Sub

    Protected override void OnBeforeDraw (ByVal e As BeforeDrawXYPlotEventArgs)

    "Clip data, browse the data cut, map and draw."

    Dim intrigues as XYPlot = e.Plot

    Var clippedXData() As Double = Nothing

    Var clippedYData() As Double = Nothing

    parcel of land. ClipDataPoints (clippedXData, clippedYData)

    For i As Integer = 0 To clippedXData.Length - 2

    Protected x 1 Double = clippedXData (i)

    Protected x 2 = Double clippedXData (i + 1)

    Var y1 As Double = clippedYData (i)

    Var y2 As Double = clippedYData (i + 1)

    Dim point1 As PointF = plot. MapDataPoint (e.Bounds, x 1, y1)

    Dim point2 As PointF = plot. MapDataPoint (e.Bounds, x 2, y2)

    Var pen As Pen = New Pen (ValueToColour (y2))

    Dim g As Graphics = e.Graphics

    g.DrawLines (pen, new PointF() {point1, point2})

    Next

    e.Cancel = True

    End Sub

    Private Function ValueToColour(ByVal value As Double) As Color

    If value<= dblmin="" then="" return="">

    If value > = dblMax then return colMaxColour

    Pctg As Double = (value - dblMin) / (dblMax - dblMin)

    Dim a, r, g, b As Integer

    a = CInt (CInt (colMinColour.A) + pctg * (CInt (colMaxColour.A) - CInt (colMinColour.A)))

    r = CInt (CInt (colMinColour.R) + pctg * (CInt (colMaxColour.R) - CInt (colMinColour.R)))

    g = CInt (CInt (colMinColour.G) + pctg * (CInt (colMaxColour.G) - CInt (colMinColour.G)))

    b = CInt (CInt (colMinColour.B) + pctg * (CInt (colMaxColour.B) - CInt (colMinColour.B)))

    r = Math.Max (0, r): r = Math.Min (255, r)

    g = Math.Max (0, g): g = Math.Min (255, g)

    b = Math.Max (0, b): b = Math.Min (255, b)

    Return System.Drawing.Color.FromArgb (a, r, g, b).

    Var col As Color = System.Drawing.Color.FromArgb (a, r, g, b).

    Return col

    End Function

    End Class

  • How to reset the graphics path properties

    Hello

    When a Labview graph is populated by the data for the first time, the plot attributes (color, style of line,...) are generated automatically by Labview.

    Imagine that the user changes the way the plot resembles his own taste. Let's say the plot 0 was blue and it's Green.

    Now it loads a new set of data in the graph, the color of the field 0 is always green.

    I wish that Labview to reassign some random colors for the plots as he did when given here where it is loaded in the chart for the first time.

    How can I do?

    Best regards

    Like any other control in LabVIEW, the properties that you manually change to stick around. Now, you can have your land constitute up to be the default colors and attributes, and it will load this way whenever the VI loads. If you pull the initial attributes when the first load of your VI, you can then use these reset all programmatically when you want.

  • Why brush always my settings back?

    When I change my brush settings, like the brush, color, size, and so on, they always returns to the previous settings, as soon as I make a stroke. It is therefore impossible to use illustrator. It seems to happen whenever I change the brush what whatsoever, with the exception of the default.

    I think you'd expect a brush Photoshop-like behavior, which you should not do.

    Illustrator brush is simply something applied to a path. That's all. The size of the outline of the plot, its color and other attributes are all part of the race, not the brush. The brush is simply applied.

    What looks like you want to do, is create the brush with the weight of the race and color of your choice.

    Draw a path with the brush.

    Drag the path to the graphic Styles Panel.

    Then, whenever you want to return to these same settings, click on the graphic Style, then draw.

  • XY graph multi plot points and color control live

    Hi all

    I'm doing something that should be simple, but difficult so far. I had a good look through previous topics and found similar things, but not really what I want.

    In my experience, I'm scanning intensity vs. wavelength.

    Ideally, I want to be able to:

    (1) scan and see live plotted points.

    (2) then I want the plot to stay on the graph when I run the following analysis, etc.

    (3) I have an arbitrary number of scans. for example to start a scan, I press a button, an arbitrary number of times.

    (4) I want to make sure the current analysis is drawn live in (red), and all the previous analyses are drawn in a different color (blue).

    (5) sometimes I want can erase the graph of all scans and start over, without having to stop the VI.

    Items 1-3 can be supported easily by placing the XY graph building and the XY graphic object inside the loop that runs the scan and uncheck 'clear data on each call' in the properties of graphic generation. See the first VI attached.

    However, at the beginning of an analysis, she joined the last part of the previous analysis up to the first point of the next scan.

    The difficult parts are 4 and 5.

    For article 4, you need to build an array of plots, which is easy if you know the number of plots, but here the number is arbitrary. So, how do I do that? I had a go trying to use Insert table in different ways, but I haven't worked on it. Then if all goes well using the graphics property XY nodes I can adjust the colors of the plots.

    For part 5 is not just enough to use the invoke = node reset by default, and have a button that executes the node. This clears the graphic but then when you run the following analysis all parcels previous pop up once again, indicating that the table that stores the plots is not actually deleted. The second accessory shows how I delete the chart.

    My biggest problem is point 4 and combining point 4 and 5 together.

    Help, please.

    I fixed the problem of the route doubly table and added in the desired color, attached plot.

    The code now done everything I wanted to in my first post.

    No doubt the code could be improved more, but that's for everyone out there who has this problem.

    Thanks to tst for give me useful advice.

  • color unique plot for all parcels in a multiplot screen?

    Hello

    I'm plotting say 100 pitches in a multiplot view. Is there a way to trace all of this in a single color?

    Currently, I draw all and then go and change the color of each. The problem with this is that sometimes, the color change does not occur quite fast and a range of colors are visible on the tracks before all traces settle on the unique color.

    Thank you

    As long as you know the maximum number of locations, you may have, you should be able to set up the colors for all the plots in advance.   You can do it manually, but if there is a large number of plots, you probably still want to make the configuration programmatically.  To start, you init the number of plots in the graph or table. otherwise, the number of sites is defined by the data.  To do this, view the legend of the plot.  For a large number of plots, right click on the legend of the plot and select the index control so that you can manipulate it as an array.  You can put the index advance to '99' and click the init table command plot with 100 items.  Now you can set the color for all 100 locations programmatically.  Once installation is complete you can copy the control to another VI and/or save the VI / control with all the properties that they are, so you won't have to do during every execution of the actual program.

  • Plot.Plot color bug?

    I am puzzled about this. Discover the almost identical two screws attached. Run one and try to change the color of the plot. Changes color according to the value of the color property. Do the same with the second VI (PlotColorWrong.vi). Try changing the color of the plot: it does not change!

    I'm doing something wrong or is this a bug of LV?

    LV2009, SP1, Windows XP.

    As I said, the crux of your property is by looking at the second route for some reason any. The plot active set to zero and things will fall in place.

  • How to choose the color marker in the plot of the intensity

    Hello

    I am tracing my 2D data file in the plot of the intensity. I want to that path of color should be as red as value maximum all in green as minimum value and 0 must be yellow. I watched this http://digital.ni.com/public.nsf/allkb/1ADFF221E27F5B5886256E6F007C7B58?OpenDocument example, but in this example they decide marker beforehand. In my case, I want to choose marker based on maximum and minimum value.

    Thank you

    Yogesh

    Here's a simple example. I didn't change anything execpt for show with 1 decimal digit z scale markers (default is zero). It is just cosmetic.

  • color of plot questions

    I do a program that takes a reading of a DAQ card. My problem is that I don't always want to see all the channels that we use. So I want the ability to disable channel (now using a Boolean true false checkbox on the right) and always see the other plots. I got this far but when I want the colors for the plot do not pass. For example, draw 1 I had green and 2 red. When I unchecked 1 the 2nd line turns green. I want to keep it red... Is this possible.

    Thanks in advance

    Hi Tech!

    Try this.

  • How can I change the color of the plots (lines, points) in the collection Scattergraph plot

    For example, I go through a foreach loop and draw two points. How to distinguish this set of plots of the yet to come? How can I change the style, color and have separate lines (instead of on the line connecting everything) for each of my plots? I don't know how to set everything up, but it still does what he wants to do. TIA.

    Hello

    The problem you see occurs because of the following lines of code:

    The _data and _data2 scatterPlot3 value

    _data = scatterPlot3

    _data2 = scatterPlot3

    When you do this, you define _data as _data2 to reference an object of the simple concession - scatterPlot3.  Yes, even if you have (from the code you have posted at least) three slots in your collection, they are all pointing to the same object of point cloud.  So when you change the color for one, it changes the color for them all.  However, I think that you have fallen on the right solution in your last sentence.  If you want to have multiple locations on your ScatterGraph, each with its own color and style, they should each be separate and unique plots in the collection plot of your ScatterGraph.  Based on the code you posted, you'll see this if you comment just the two lines shown above.

    Please let me know if something is still uncertain.

    NickB

    National Instruments

  • How to plot several points in real-time on a XY chart in different colors?

    Hello

    I am a beginner of labview.  Here is a screenshot of the program. It provides information in real time to a patient when walking from their foot position, random target (points Exchange with each step) and a reference point (constant).  At present, data from three points are grouped in the same plot on the graph XY.  In the graphics property, when I change the color for field 0, every color change.  I tried to connect the XY graph in table built above, but a cut wire it occurs (connected 2 groups with different content).

    Any help would be great!  Thank you

    Amarcher wrote:

    Thank you.  I tried to change the plots in properties, but it did not work.

    Here's what you can do with very minor changes. It is basically the same as in my previous example.

  • Change the color of the points plotted on a linear graph

    I was wondering if anyone knows how to change the color of the points plotted on my line graph (1e) to make it look like the 2nd. I want to emphasize the points plotted on top like the other online. Also, how to make tick marks on the x - axis as the second chart?  If someone could help me that would be great

    -Elise

    JavaScript:;Screen Shot 2016-01-26 at 10.03.12 PM.pngScreen Shot 2016-01-26 at 10.03.22 PM.png

    You need to copy segments of track of the chart, and then paste in place. Then the color what he read.

    With regard to the tick marks: find out how to enter your data for the Illustrator graphic function.

  • Colors, original plot in a xy Graph to default values

    If everything goes well, a simple, but I can't find an answer.

    I've fiddled with the colors of the individual parcels in a xy Graph.  Now, I don't want their messed around, I want the old colours of return.  If I was creative enough, I could put them each in turn with a beautiful color, but I'm not.

    How can I re-initialization by default?

    Thank you!

    No problem - I have similar problems myself, being on v8.2.

    Here ya go!

Maybe you are looking for

  • How I can pin mozila firefox on the desktop?

    How can I add a shortcut on the desktop for Firefox? On the web (Firefox) under 'File', I do not see ' send to '. I have 19 Firefox version. Is this the latest version?

  • Cannot write to the file of measure

    Hi all I'm acquires data from the analog input using the DAQ with Embedded controller PXI8186 Wizard of PXI6259I'm writing a file format xlxs using writing to express vi measure, every time I have applied no file has not been createdI tried several f

  • Brightness of the display on T400

    I can't do the brightness of the screen works on my new T400 (windows 7 64 bit). When I try to reduce or increase the brightness of the screen does not change its keys Fn + start/end, but brightness indicator appears on the display. And also when run

  • I have an exclamation point flashing in a yellow circle in the taskbar. Is it okay to open or is it a virus?

    I am running Windows Vista and when I opened my count I noticed an exclamation point flashing in a yellow circle in the taskbar.  Is it okay to open or is it a virus?  I ran my virus scan and it captures all the viruses.  How can I get rid of this ex

  • CS ACS Solution engine with external AD database

    I have a client who has set up a CS ACS Solution engine (device). They currently have VPN tunnels that terminate on the SAA and the ACS provide authentication via an external database to the AD. I did the installation or configuration of the device a