Plot scale association

Similar Questions

• How can I get the name of the channel scale?

  Hello.

  I am trying to adjust a scale for a channel programmatically in a task. Attached is an excerpt of what I'm trying to do. I am unable to find the name of scale associated with the channel. Ideally when I "ChanType" I'd scale name and move to the scale property node and create the VI of scale.

  Thanks a bunch.

  (I just noticed the error line not be connected at the beginning.) Has been corrected, but I did not bother to repost.)

  Never mind.

  Once I simulated the device on my machine, the appropriate properties became available. It's all good.

  

• Cleaning of a bode field

  I'm developing an application to test the hardware components designed by my colleague.

  My application can read signal from the material and data flows in a log file. In addition, I can order the supplies to perform a frequency sweep on one of its input signals. So I have the ability to connect to the input signal frequency sweep, but also a corresponding output signal.

  I can then do two things with the file:

  1. Read the log file and read the signals on a strip chart. I have adjustable low-pass filters to reduce noise on the raw, if necessary.
  2. Read the logfile of a signal frequency-swept, to execute a transfer function on two selected signals and plot the data obtained on a size-v-freq and a graph of log phase-v-freq, aka Bode plots scale.

  My problem is that my Bode plots are sometimes noisy, and I don't know how I should go about their cleaning.

  Here is an example:

  

  I know that the swept frequency input signal by was loud himself, so I thought to pass through a low pass filter before plotting, but it does not make changes.

  I also saw all the options of the CVI curve adjustment, but I'm not competent in whether or not it would sense, especially for phase-v-freq graph, as its shape is indefinite.

  Someone can push me in the right direction? I am sure there is information I provide not as well.

  Hi Rachel,

  For the example I provided, the input signal is "raw" unfiltered data. What it really is is forced to low sinusoidal voltage, which is summarized with the real signal on that channel on the material (which is the white noise of low voltage). For the purpose of our tests, we use the free entry and exit, and the output channel is simply the input channel put through a low pass filter. We see a (smoothed) sine wave phase shifted silent for output.

  After a long discussion with my colleagues, we think we know where we went wrong with this example.

  As I said, my application command equipment to do a frequency sweep. It is to reproduce what seemed the signals when my colleague uses his material (Venable) commercial frequency response Analyzer, which at the end of the day, we try replace by my application. How I got this set up has been the input signal would spend cycles N of a sine wave at the frequency f = Fstart, then f would increase percentage P cycles N to f = Fmax. N and P would remain constant.

  We realized that if we kept constant N, us would collect enough data to higher frequencies, which is probably a lot of noise at higher frequencies due to the low SNR of the input signal. We believe that this could help clean up the ground, but we could still have a fundamental problem with how we have tried to make the TransferFunction.

  I logged on to the whole of the file, would have extracted all input and output signals and performing the unique function of transfer on 2 tables of the data set. I think that we became aware that the error in this method is that while signals (in the time domain) seem to be reproducing the Venable, the Venable analyze each individual f step and produce a data point for the route of Bode. We now believe that this is how the CVI TransferFunction function must be used. That is, providing instead a signal complex (y = sin (f0) + sin (f1) + sin (f2) +... + sin (Fmax)). It would be too resource-heavy for our material.

  If someone can confirm if it is the right way to use the TransferFunction, it would be very appreciated...

• mask changes size when overlay cache track is used to link a clip to it

  Hello

  I'm new to the Prime Minister and made only very basic clip front mount.

  I want to apply a mask to a fixed element and animate both of the scale in and rotation.

  Everything goes well with the scale and rotation of the identical key frames.

  Until I have add overlay track matte for the clip and the layer mask.

  The mask reduced in size, but still indicate the values of the appropriate scale associated with keyframes.

  If I increase the masks scaling, it behaves as if it is to be cut by an invisible box and cultures on all sides

  Can anyone help because I am confused?

  If I removed the link cache by approach, everything behaves as expected?

  Masks and hides by approach work with alpha and probably get in way mutually.

  By nesting eliminate you conflicts.

• How to make soft code of the individual segments of API

  Hi gurus,
  
  Can you please tell me how to get soft coded individual segments and individual segments of combination of code for API. I am waiting for your answer!
  Thanks in advance!

  in the assignment of api there are has values such as segment1, segment2, segment3 etc. I fyou do not soft\_coding_keyflex_id you can pass values of segment.

  --
  -- ----------------------------------------------------------------------------
  -- |-------------------------< update_emp_asg_criteria="">----------------------|
  -- ----------------------------------------------------------------------------
  --
  -{Start of comments}
  /*#
  * This API updates the assignment of the employee attributes that affect the
  * criteria of law for any entry of the item.
  *
  *
  *

  Licensing
  
  * This version of the API is a license for the use of human resources.
  *
  *

  Prerequisites
  
  * The transfer must be an assignment of the employee. The assignment must exist as
  * of the entry into force of the amendment
  *
  *

  Success of the position
  
  * The API updates the assignment.
  *
  *

  Failure of the post
  
  * The API does not update the assignment and will raise an error.
  @param p_effective_date determines when the DateTrack operation into
  * force.
  @param p_datetrack_update_mode tells DateTrack how to use when
  * update of the registration. You must assign to each UPDATE, CORRECTION,
  * UPDATE_OVERRIDE or UPDATE_CHANGE_INSERT. Available modes for use with a
  * record depend on the dates of record previous changes and the
  * entry into force of this change.
  @param p_assignment_id identifies the registration of the assignment to change.
  @param p_validate if true, then the only validation will be performed and the
  * database remains unchanged. If false and any validation checks pass.
  * then the database is modified.
  @param p_called_from_mass_update true if the API is called from the
  The process of collective update. The default value of information use and organization of
  Position information, if the first two are not provided.
  @param p_grade_id identifies the category of the duty station
  @param p_position_id identifies the position of the assignment
  @param p_job_id identifies the work of the assignment
  @param p_payroll_id identifies the payroll of this assignment.
  @param p_location_id identifies the location of the assignment
  @param p_organization_id identifies the Organization of assignment
  @param p_pay_basis_id salary for the assignment
  @param p_segment1 key flexfield segment.
  @param p_segment2 key flexfield segment.
  @param p_segment3 key flexfield segment.
  @param p_segment4 key flexfield segment.
  @param p_segment5 key flexfield segment.
  @param p_segment6 key flexfield segment.
  @param p_segment7 key flexfield segment.
  @param p_segment8 key flexfield segment.
  @param p_segment9 key flexfield segment.
  @param p_segment10 key flexfield segment.
  @param p_segment11 key flexfield segment.
  @param p_segment12 key flexfield segment.
  @param p_segment13 key flexfield segment.
  @param p_segment14 key flexfield segment.
  @param p_segment15 key flexfield segment.
  @param p_segment16 key flexfield segment.
  @param p_segment17 key flexfield segment.
  @param p_segment18 key flexfield segment.
  @param p_segment19 key flexfield segment.
  @param p_segment20 key flexfield segment.
  @param p_segment21 key flexfield segment.
  @param p_segment22 key flexfield segment.
  @param p_segment23 key flexfield segment.
  @param p_segment24 key flexfield segment.
  @param p_segment25 key flexfield segment.
  @param p_segment26 key flexfield segment.
  @param p_segment27 key flexfield segment.
  @param p_segment28 key flexfield segment.
  @param p_segment29 key flexfield segment.
  @param p_segment30 key flexfield segment.
  @param p_employment_category job category. Valid values are defined
  * in the type of research EMP_CAT.
  @param p_concat_segments concatenated segments key Flexfield
  @param p_contract_id associated with this contract award
  @param p_establishment_id for French business groups, it identifies the
  * Creation of legal person for this mission.
  @param p_scl_segment1 first section between soft-coded key Flexfield.
  @param p_grade_ladder_pgm_id Grade scale for this mission
  assignment of the p_supervisor_assignment_id supervisor @param which is
  * responsible for overseeing this assignment.
  @param current Pass p_object_version_number in the version number of the
  * assignment to update. When IPY ends if p_validate is false,
  * will be the new version of the update assignment number. If
  * p_validate is true will have the same value that was passed in the value.
  @param p_special_ceiling_step_id going on in the highest market allowed for the
  * grade scale associated with the quality of the assignment. Will be set to null
  * If the year is updated to null. If p_validate is set to false, will be defined the
  the value of the step of the ceiling of the database. If p_validate is set to true will be
  * the value transmitted.
  @param p_people_group_id if a value is passed in this parameter, it
  identifies the an existing combination of people key Flexfield group to associate
  * with the assignment and segment values are ignored. If a value is not
  * happened, then the different segments of people provided key Flexfield group
  * will be used to choose an existing combination or create a new combination.
  * When the API ends, if p_validate is false, then this is only
  identify the combination of the people group key flexfield for
  * This assignment. If p_validate is set to true, then the null value.
  @param p_soft_coding_keyflex_id if a value is passed in this parameter,
  * It identifies an existing combination of soft-coded key Flexfield to associate
  * with the assignment and segment values are ignored. If a value is not
  * happened, then the different segments of the Soft coded key provided Flexfield
  * will be used to choose an existing combination or create a new combination.
  * When the API ends, if p_validate is false, then this is only
  identify the combination of the soft key coded to flexfield
  * This assignment. If p_validate is set to true, then the null value.
  @param p_group_name if p_validate is set to false, the value in the key group of people
  * Flexfield concatenated segments. If p_validate is set to true, the value is null.
  @param p_effective_start_date if p_validate is set to false, then the value the
  * start date effective on-line update of assignment that exists now as a
  * the date of entry into force. If p_validate is set to true, then the null value.
  @param p_effective_end_date if p_validate is set to false, then the value the
  * end date effective on-line update of assignment that exists now as the
  * entry into force. If p_validate is set to true, then the null value.
  @param p_org_now_no_manager_warning true if this transfer is one
  * Manager, the organization is updated and there is now no Manager in the
  * previous organization. False if another Manager is in the
  * previous organization.
  @param p_other_manager_warning if set to true, a manager has existed in the
  * before calling this API and the flag of Manager has the value
  * "Y" for Yes.
  @param p_spp_delete_warning set to true when grade step and point investments
  * date indeed completed or purged by this update. Both types of change
  * occur when the slope is modified and there are lines of investment of the spinal column point above
  update our. Set to false when there is no rank and point investments
  * are concerned.
  @param p_entries_changed_warning value 'Y' when one or several entries of item
  * are changed due to the change of assignment. The value of ' if at least a salary
  * entry item is affected. Room "is a more specific case of 'Y') value"n""
  * When no input item is changed.
  @param p_tax_district_changed_warning true if the assignment is for a
  * United Kingdom legislation and payroll has been changed such that. In the opposite case
  * set to false.
  @param p_concatenated_segments if p_validate is set to false, the encoded value button
  * Concatenated Flexfield segments, if p_validate is set to true, the null value.
  @param p_gsp_post_process_warning set to the name of a warning message of
  * Dictionary messages if any scale of Grade-related errors were
  * encountered during the execution of this API.
  * @rep: displayname Update employee award criteria
  * @rep: category BUSINESS_ENTITY PER_EMPLOYEE_ASG
  * @rep: category MISC_EXTENSIONS HR_DATAPUMP
  * @rep: category MISC_EXTENSIONS HR_USER_HOOKS
  * @rep: increased public
  * @rep: active life cycle
  * @rep: ihelp PER/@scalapi API in Oracle HRMS
  */
  --
  -{End of comments}
  --
  procedure update_emp_asg_criteria
  (p_effective_date dated
  p_datetrack_update_mode in varchar2
  p_assignment_id number
  p_validate in Boolean false by default
  p_called_from_mass_update in Boolean false by default
  p_grade_id in numbers by default hr_api.g_number
  p_position_id in numbers by default hr_api.g_number
  p_job_id in numbers by default hr_api.g_number
  p_payroll_id in numbers by default hr_api.g_number
  p_location_id in numbers by default hr_api.g_number
  p_organization_id in numbers by default hr_api.g_number
  p_pay_basis_id in numbers by default hr_api.g_number
  p_segment1 in varchar2 default hr_api.g_varchar2
  p_segment2 in varchar2 default hr_api.g_varchar2
  p_segment3 in varchar2 default hr_api.g_varchar2
  p_segment4 in varchar2 default hr_api.g_varchar2
  p_segment5 in varchar2 default hr_api.g_varchar2
  p_segment6 in varchar2 default hr_api.g_varchar2
  p_segment7 in varchar2 default hr_api.g_varchar2
  p_segment8 in varchar2 default hr_api.g_varchar2
  p_segment9 in varchar2 default hr_api.g_varchar2
  p_segment10 in varchar2 default hr_api.g_varchar2
  p_segment11 in varchar2 default hr_api.g_varchar2
  p_segment12 in varchar2 default hr_api.g_varchar2
  p_segment13 in varchar2 default hr_api.g_varchar2
  p_segment14 in varchar2 default hr_api.g_varchar2
  p_segment15 in varchar2 default hr_api.g_varchar2
  p_segment16 in varchar2 default hr_api.g_varchar2
  p_segment17 in varchar2 default hr_api.g_varchar2
  p_segment18 in varchar2 default hr_api.g_varchar2
  p_segment19 in varchar2 default hr_api.g_varchar2
  p_segment20 in varchar2 default hr_api.g_varchar2
  p_segment21 in varchar2 default hr_api.g_varchar2
  p_segment22 in varchar2 default hr_api.g_varchar2
  p_segment23 in varchar2 default hr_api.g_varchar2
  p_segment24 in varchar2 default hr_api.g_varchar2
  p_segment25 in varchar2 default hr_api.g_varchar2
  p_segment26 in varchar2 default hr_api.g_varchar2
  p_segment27 in varchar2 default hr_api.g_varchar2
  p_segment28 in varchar2 default hr_api.g_varchar2
  p_segment29 in varchar2 default hr_api.g_varchar2
  p_segment30 in varchar2 default hr_api.g_varchar2
  p_employment_category in varchar2 default hr_api.g_varchar2
  - Bug 944911
  -P_group_name changed to out
  -Added new param p_pgp_concat_segments to asg s procs
  -to add other p_concat_segments
  , p_concat_segments in varchar2 default hr_api.g_varchar2
  p_contract_id in hr_api.g_number by default- bug 2622747 number
  p_establishment_id in hr_api.g_number by default- bug 2622747 number
  p_scl_segment1 in varchar2 default hr_api.g_varchar2- bug 2622747
  p_grade_ladder_pgm_id in numbers by default hr_api.g_number
  p_supervisor_assignment_id in numbers by default hr_api.g_number
  p_object_version_number number nocopy
  p_special_ceiling_step_id number nocopy
  p_people_group_id number nocopy- bug 2359997
  p_soft_coding_keyflex_id number nocopy- bug 2622747
  , p_group_name out varchar2 nocopy
  p_effective_start_date date nocopy
  p_effective_end_date date nocopy
  , p_org_now_no_manager_warning out Boolean nocopy
  , p_other_manager_warning out Boolean nocopy
  , p_spp_delete_warning out Boolean nocopy
  , p_entries_changed_warning out varchar2 nocopy
  , p_tax_district_changed_warning out Boolean nocopy
  , p_concatenated_segments out nocopy varchar2- bug 2622747
  , p_gsp_post_process_warning out varchar2 nocopy
  );
  --

• plot of high density to scale

  Hello, I use the Labview 8.2.1 and I create a diagram in my program.

  The plot that is created is not as accurate as the data in the *.txt file.

  The data in 2 columns, the left corresponds to the right of the y-axis and the x-axis.

  Here is a sample of the data:

  0-931
  0, 2-920
  0, 4-910
  0, 6-902
  0, 8-895
  1-892
  1.2 - 888
  1.4 - 884

  1.6 - 882
  1.8 - 882
  2-882

  And here is a summary of the diagram corresponding to these data.

  

  As we can see the values y 931, 895 that match, 902, 910, 920 the values x 0, 0.2, 0.4, 0.6, 0.8 are traced to the same value x 0.

  Other values are reported in the same way, i.e. the values y but which correspond to the floating x-values, are not drawn to the floating element of the x values, they correspond to the most significant digit of the floating number.

  I tried to solve this problem by changing to 1 the digits of precision in the menu "Format and accuracy" "waveform scheme", but

  

  It results only in the appearance of the x-scale and not in the resolution of the plot.

  What Miss me?

  Hope that I have been understood.

  Waiting to get an idea.

  Thank you in advance.

  You read the data as integers, so you lose all fractional parts.

  Go to the diagram and select Double as the data type for reading spreadsheet file VI.

  Lynn

• XY Graph-Y-scale visible on the scale of Y corresponding watch still false Max and Min

  Hi guys,.

  I use the XY graph to display the data with 3 Y-scales.

  When I put any scale Y property visibility to False, its display even the Y scale Max and Min range lines in the plot area of the chart and cross line or additional parallel line with other visible scales.

  Attached to the page Ref.

  And I know that the cross-line may be due to different ranges of scales is defining. But the XY graph does not show the scales are invisible and possessions as well.

  Please provide your suggestions to avoid this.

  

  Scales and lines associated with these scales are separate properties. I've never tried and now I'm not in front of a computer, but should have properties for the definition of the grid line color. Implement transparent.

  Mike...

• How is scale 2 scales with node proberty?

  Hello world

  I have a problem with the xy-graphs with 2 different scales there.

  What is already done:
  I have a chart with a scale xy y on the left side and a scale are on the right site. I have also 2 locations inside, one is associated with the left and the other with the right y-scale.

  What is my problem:
  I want to set the range programmatically both sides. the left site needs a greater range than the right. but this does not work for me. I can set the range left or the right, but not both at the same time. I tried it with a knot proberty cause I use it already to associate the plots of the scales, but insert "y-minimum" and "maximum-y" to the node affects only a ladder there.

  I work with LV 8.6 (Base)

  any suggestions?
  Thanks in advance.

  Try this. Maybe this will solve your problem.

  You can select active scale and change its range. Change the active scale, then repeat the procedure.

• Chart WPF: AllPlots collection does not contain the scales in the second time.

  Hello

  I'm using WPF OR chart, and I'm in the binder through the datasource property.

  I have two axes in XAML that represent the scales.

  When you press the button I create random data (shown in the code below).

  But when I delete all data and adds the data in the list of places that have already been added in the past (for example: if I added 3 data in the past and now I'll add only 2 or 3), then plots that are created in the variable AllPlots not gets scales except the first (never erased) and he destroyed me certain things such as zooming.

  List newdata As new List();
  
  Random r = new Random();
  
  < 6000;="">
  
  {
  
     NewData. Add (r.Next (-20, 45));
  
  }
  
  Data.Add (newdata);

  Hmm, a very strange problem. Unfortunately, I can't reproduce this behavior at all: I still see '2' for each parcel, before clear or after.

  I guess that you have run the example as-is in a new project, without any other change to match your real application? And that you use the latest version of measurement Studio 2015?

• questions of small scale log values

  I have a strange problems with tracing values in graphs for NI Measurement studio WPF. This problem occurs when the axis is log based on and the value on the axis spans less than 1 to 1 (i.e. 0.001 to 1000). The chart automatically change the lower x-axis to limit to 1. The behavior is similar to the one reported here (http://forums.ni.com/t5/Measurement-Studio-for-NET/log-scale-won-t-scale-to-show-small-values/m-p/27...) but in my case, none of the mapped value is 0 or less than the lower limit of 0 and the axis is set to greater than 0.

  The code below will reproduce the problem:

  Focus() pt = new Point [100];
  for (int i = 1; i)<=>
  {
  PT [i-1] = new Point (0,1 * I, me)
  }

  Field pl = new Plot ("test");

  PL. data = pt;

  Graph Plots.Add (pl);

  Where the x-axis of the graph are log10 scale (and the boundaries are defined on {0,1, 10} in the code .xaml) and the y axis is linear (no matter the scale really). The chart automatically x-axis it 1 and this can be changed to 0.1 but it comes back again to 1 if the visible property of the chart changed.

  This behavious doesn't happen if all the x-axis values are less than 1 or greater than 1 that is the code below to draw correctly and the axis is not reset to 1, etc.:

  Focus() pt = new Point [100];
  for (int i = 1; i)<=>
  {
  PT [i-1] = new Point (0.001 * I, me)
  }

  Field pl = new Plot ("test");

  PL. data = pt;

  Graph Plots.Add (pl);

  Someone knows it why it behaves like that and what can we do to fix this?

  Which seems to be the case, it's that the default FitLoosely range adjustment see values ranging from 10^-1 to 10-¹, and then choose a range of 0,10 for data. Since no one can be represented on a logarithmic scale, forced the scale to an arbitrary value, less than ten years, thus giving a final range of 1,10 and truncating low values. I created a task to solve this problem.

  To work around the problem, you can change the Adjuster on the scale to another value, such as FitExactly .

• Legend of the plot does not update?

  My legend of conspiracy will not show the new names I'm wiring. It displays the default plot 0, track 1, and so on, rather than the column headers it is supposed to read the data file.

  Any ideas? See the attached VI and the associated text file that I am trying to trace.

  In the example you have validated, your table for the colors of the plot is empty if the because the loop will not run.

• Waveform multiple graphics "bunk plots" with limits

  Hello world

  Here's my problem, currently I have 4 waveforms 'associated' with the "Build Array" function and connected to a waveform graph.

  I use the option "stacked plots" in order to have 4 curves with only a category axis.

  What I want to do is add a line of upper limit for each curve.

  Thank you very much in advance for your answers!

  Hi GoD_AsS,

  Use the classic palette tables. Make their border/background transparent and using a decoration as "frontier" for all 4 of them...

• Chart with multiple scales of Y

  Hello

  As you can see in the excerpt, I'm trying to plot a graph with several scales of Y. What do you think is wrong with it to get the following error.

  

  Possible reasons:
  
  LabVIEW:  invalid property value.

  I wouldn't change nothing to indexing.  You already wrote this code.

  I clicked the balance you already had and clicked on "Double ladder" to create the second and third.  Once they have existed, the crux of your property has worked fine as it was.

• FFT plot

  Hello

  I'm tracing a FFT of find a different frequency of the signals non-periodic signal.

  kindly help to plot the frequency and Amplitude.

  attachment have given amplitude time Vs

  Is that what you see?

  

  The image I posted previously is the same graph and the same data, only the maximum of the scale of the x-axis has been changed to 100000 of 100000000.  Just select the maximum value with the type tool and enter the new value. This does not change the data in some way. It changes only the portion of the data that is displayed on the screen.

  Lynn

• Can I detect a change of name of plot event in a legend of the plot?

  I want to update a configuration file, if a user changes the name of a conspiracy in the plot legend.

  Events, I see plots are: value change, the change of range autoscale, plot attribute change and change of range of scale.

  Change of attribute plot doesn't seem to understand anything like on behalf of the parcel, and others obviously do not contain this info either.

  Is it possible to recover this event?

  Thank you.

  Jordan

  First of all, remember that there is no simple way to encode anything, so I can offer a possible solution for you, but it certainly isn't the only one.

  LabVIEW has no property to check if the name has been changed through a structure of the event, but you can create your own LabVIEW can read events. I found this really good which may help you. Read this and mess around with it and see if it gets you anywhere: Creation of user events

  Once you get to trigger the appropriate, then its just get this deal to update the file you want.

  Another possible workaround solution that isn't ideal, is to create a chain control and who have to be on top of the name of the parcel. You would be able to produce then an event in this chain, change the value.

  I hope this helps.