Pls help I'm totally stuck trying to reinstall windows 7 on my computer hp mini 110
I have a hp mini 110-3538tu and he played in all directions upward and very slow, so I have a USB stick with Windows 7, which I am trying to install on windows 7 starter edition, but when I get to the part where I have to choose the driver to install, I can choose my USB but it says no device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK. I can't have happened here. A beautiful person out there can pls help.
Hello:
See if it works...
I zipped and attached the controller driver SATA NM10 your laptop uses the label of attachments below...
Unzip the file and copy the content without all the folders in your USB flash drive or flash drive, if you have two usb ports.
With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.
After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.
You should now see the storage driver files listed (or access them if you put them on the same flash drive than your installation of W7 file).
If you check the box, it only includes the compatible driver.
Follow the prompts and hopefully, W7 should install.
Tags: Notebooks
Similar Questions
-
I tried the suggestion on the error message and nothing works
Hi Honee,
Please, try the following.
You must boot your PC with the XP cd-rom Setup disk, if you have
one.Then, when you get to the screen with the following option appears:
To repair a Windows XP installation using
Recovery Console, press R.Then press [R] to launch the "Recovery Console".
When confronted by a prompt asking for the administrator password - just
Press [ENTER]After his start in RC - type the following command:
Expand x:\i386\hal.dl_ c:\windows\system32\hal.dll
(where [x] is the letter of your cd drive)
* NB If SP3 is installed - then the command that you type must be:
Copy c:\windows\ServicePackFiles\i386\hal.dll c:\windows\system32
... instead, because the files are of two different levels of review
(versions).Then restart.
I hope this helps!
Shawn - Support Engineer - MCP, MCDST
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
I am trying to reinstall windows xp from disk but it only gets up to this request then for service pack 1 disc when I press on enter I get the file 'asms' on windows xp pro service pack 1 cd needed someone had this problem and managed to solve it thanks a lot
Hello
Thanks for joining us on the Microsoft Community.
According to the description of the problem you are facing problems with reinstalling Windows XP Professional, and you are to be invited to insert the Service Pack 1 drive to complete the installation.
To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:
1. did you uninstall Windows XP Service Pack 1 prior to reinstalling Windows XP?
2. what was the installed Service Pack earlier?
You may need to uninstall Windows XP Service Pack 1 first and then perform the reinstallation of Windows XP and to check if the installation goes smoothly.
Please see the following articles for more information about uninstalling Windows XP Service Pack 1:
How to manually remove Windows XP Service Pack 1
http://support.Microsoft.com/kb/329015
How to remove folders from Windows XP Service Pack 1
http://support.Microsoft.com/kb/329260?WA=wsignin1.0
Hope this information helps. Please come back for any clarification on this or any issue of Windows. We will be happy to help you.
-
I'm trying to reinstall Windows XP boot disk.
I'm trying to reinstall Windows XP boot disk. Won't work, he said a more recent edition is installed. Tried to restart from the disc and will not work. Reference DELL logo does not appear. Tried to format the C drive, no good no more.
Hello
1. What is the problem you are having with the Windows Xp operating system that is installed?
So an upgrade on Windows site, it is necessary that you have the same Windows components available on the computer as on the installation disc, until the exact Version.
The reason why you may receive this message could be due to.
a. Service packs have been updated
b. the Internet Explore may have been updated since the version by default XP 6 to Internet explorer 8.
c. the framework of shell and .net of power and other components can be updated.
Please follow the links below to solve the problem.
Method 1
How to perform an upgrade on the spot (reinstallation) of Windows XP
http://support.Microsoft.com/kb/978788
If the problem is not resolved by following the steps in Windows Xp, then continue to method 2.
Method 2
How to install or upgrade to Windows XP
http://support.Microsoft.com/kb/978307
I hope this helps.
-
I'm trying to reinstall windows vista with the cd that hp sent me.
I am trying to reinstall windows vista with the cd that hp sent me and he used to in stall, I had to have a new hard drive put in and I'm trying to put vista in and I can't help please
If you have problems with the HP recovery disk, you will need to contact HP.
This is HP Recovery Media, not Microsoft.
HP Contact Info:
http://welcome.HP.com/country/us/en/contact_us.html
See you soon.
Mick Murphy - Microsoft partner
-
After the execution of Windows 7 for 2 years that I now have a windows message facility is illeagal. Tried to reinstall windows, but the message is cannot install a previous version
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 0x8004FE21
Code of Validation caching online: 0x0
Windows product key: *-* - M892G - 84D7W-VYVVB
Windows product key hash: 8URszDmqchXk0nyLWXx2jditWJE =
Windows product ID: 00359-030-0078141-85521
Windows product ID type: 5
Windows license type: retail
The Windows OS version: 6.1.7601.2.00010300.1.0.003
ID: {656CCD50-41C9-41C3-968E-D29BBD46AA74} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Home Premium
Architecture: 0x00000000
Build lab: 7601.win7sp1_gdr.120330 - 1504
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: 2.0.48.0
OGAExec.exe signed by: Microsoft
OGAAddin.dll signed by: MicrosoftOGA data-->
Office status: 100 authentic
Microsoft Office XP Professional - 100 authentic
OGA Version: Registered, 2.0.48.0
Signed by: Microsoft
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program may Explorer\IEXPLORE.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
[File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7601.17514], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100Other data-->
Office details:{A9BF75C2-FBF3-4795-953B-E259BD0C2131} 1.9.0027.0 6.1.7601.2.00010300.1.0.003 x 32 *-*-*-*-VYVVB 00359-030-0078141-85521 5 S-1-5-21-1580701254-2691487138-3117158855 HP-Pavilion ,FK484AAR-ABA m9400t American Megatrends Inc.. 5.33 20081107000000.000000 + 0009CE93307018400FA 0409 0409 Eastern Standard Time(GMT-05:00) 0 3 HPQOEM SLIC-CPC 100 100 Microsoft Office XP Professional 10 roTAwuyn2K8JnfnZ5p70qCWUSww = 54186-640-4025656-17423 14 97728824C57890A Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514Name: Windows 7 HomePremium edition
Description: operating system Windows - Windows (r) 7, retail channel
Activation ID: 2e7d060d-4714-40f2-9896-1e4f15b612ad
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00359-00170-030-007814-01-1033-7600.0000-3102009
Installation ID: 010516027730660442597094592351394511091775644602024082
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: VYVVB
License status: licensed
Remaining Windows rearm count: 5
Trust time: 10-02-2012 17:32:36Windows Activation Technologies-->
HrOffline: 0x8004FE21
HrOnline: n/a
Beyond: 0x000000000001EFF0
Event timestamp: 10:1:2012 07:16
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:
Altered the file: %systemroot%\system32\sppobjs.dll
Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
Altered the file: %systemroot%\system32\sppwinob.dll
Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
Altered the file: %systemroot%\system32\drivers\spsys.sys--> HWID data
Current HWID of Hash: LAAAAAEAAAABAAEAAQABAAAAAgABAAEA6GFOQjaxCJyw9OJsCMr4P8RozDE =Activation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0x0
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
HPQOEM APIC-SLIC-CPC
FACP SLIC-CPC HPQOEM
HPET SLIC-CPC HPQOEM
MCFG SLIC-CPC HPQOEM
LASRYVITRAGE HPQOEM SLIC-CPC
GSCI HPQOEM SLIC-CPC
SLIC SLIC-CPC HPQOEM
SSDT HPQOEM SLIC-CPCHave you tried to restart by phone?
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us
----------------------
Have you installed a new hardware or software since you started facing this problem?Do you have any software installed record cleaning? If so, uninstall it, registry software is known to tamper with Windows activation technologies.
What Antivirus utility you installed?
What's your date and time correct?
-
I am trying to reinstall cs6 on my new computer, what are the steps to do this? Its already on both computers.
Hello
To download please visit:-applications download Creative Suite 6
It is advisable to disable the software on a computer on which it will be is most used, especially before giving away or selling the computer or reformat the hard disk. Please see this link: How to disable the software. This frees an activation if you have the option to install the software on another computer at any time.
If you do not have access to your old computer because you have replaced a hard drive, upgraded your operating system to format your computer before you deactivate your software or your computer is dead, you can ask Adobe Support to help you disable from a machine, you cannot access. Have your serial number or Adobe ID ready, then contact us.
To load the software on another computer, download and install it as you did on the first computer. Then enter your serial number to activate it.
Hope this helps!
-
XP installation problem
while trying to install windows xp on my computer (processor i3), she shows looking for previous versions of windows and then crashes the system. So please give me a solutionHi deva_reddy,
Looks like you are trying to do a repair of windows xp installation.
You use a windows installation cd?
Refer to the link below for the procedure to install windows XP using different methods.
http://support.Microsoft.com/kb/978307
Hope the helpfu.
-
Computer HP mini 110 locked CNU9453NLK error. Help, please. Thank you!
Enter e9lovqf9ks
Use this code to go into the BIOS.
Disable all passwords that are enabled.
If demand for CURRENT password using this code.
Request NEW password just press ENTER.
If asked to hit just to CHECK password to enter.
Save and exit.
REO
-
I need to reinstall windows XP an accident which can be the result of a virus. I get the blue death creen when I try to start. I do not have my original windows disks but borrowed one from a friend. I am trying to reinstall windows XP but when I enter my license key (from the label of origin on my computer) it tells me it is invalid. If I don't have my original windows CD how can I get resettled windows?
The borrowed XP CD is not the correct version of your product key. Since you have a label on the computer, or you have an OEM brand computer (Dell, HP, etc.) or on a generic computer built.
If you have a branded computer, contact the computer mftr. to get the recovery CD. otherwise you would need a XP install CD that was the same brand (Dell, HP). In these cases, the product key will not be registered during the installation process. The alternative is to use the product key on the COA sticker on the computer with a drive manufacturer OEM generic system. MS - MVP - Elephant Boy computers - don't panic!
-
I am trying to load Windows Vista on my computer and the installation, I get an error message saying I have to close the installation program and select programs and uninstall Windows PowerShell, I have no idea where I can find, I need answers, thanks in advance
original title: where to find WIndows Poweershell?Go to programs and features, select view installed updates. You should find an entry for Powershell. Select it and uninstall.
-
trying to run Windows 7 on my computer, but I need a good video card that can support Aero
Hi, I am trying to run Windows 7 on my computer, but I need a good video card that can support Aero. I would like a card that can run games too. Does anyone know a good AGP video with at least 256 MB of RAM?
I just installed Windows 7 temporarily so I have a work desk. I have a new copy of Windows 7 was waiting when it is nearing completion, and I will install my new copy after I get a graphics card and processor for it.
Also, I was looking for some video cards and I found some but I would like some opinions on them. And I would like to know if they're going to run Aero.MAP 1: JATON 3DFORCE FX5200TV GeForce FX 5200 128 MBMAP 2: EVGA 512-A8-N403-LR GeForce 6200 512 MB -
Stuck in a loop trying to reinstall Windows Vista
Original title: computer turns off in the middle of the reinstallation of windows... Now, what gives the "Windows cannot complete the installation in Mode safe. To continue installing Windows, restart the computer "message.
It is, when I restart it gives me the same message and it is an endless loop.
Ive used a Recovery Manager.
I do not have a CD and I have a HP Pavilion. + VistaAny help, suggestions, solutions, advice will be greatly appreciated!
solved... everything that I needed to do is press f 11 (I think) to re start the process
Hi Nora,.
Because you used the HP Recovery Manager to reinstall Windows, you should contact HP support for further assistance.
-
I am trying to reinstall Windows Vista from my drive hard can u help me__
I need some help tryin to reinstall windows vista from my hard drive, I went on the recovery program who was here and burned a cd, but none of the programs on my computer it open so I need to know how to reinstall it from my disk hard please
You normally have to boot from the recovery disc:
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to perform a recovery of the recovery hard disk Partition.
Normally, you have to press F10 or F11 at startup to start the recovery process...
Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
For any questions/problems about the recovery process, you will need to contact the manufacturer of the computer.
It is their software/recovery process, not Microsoft.
See you soon. Mick Murphy - Microsoft partner
-
I am trying to record the product key I PAID for the code and it is not recognized.
Pls help.
Hello
· Were there any material changes made to the computer?
I suggest you try the steps from the link: you receive an error message after you enter the product key when you try to install Windows XP: http://support.microsoft.com/kb/310637
Maybe you are looking for
-
I would like to remove/hide the address bar. How can I do?
I use Firefox ESR 31.4 Thank you
-
New version of google maps is out. Went to charge and Google says 'not supported', and specifically notes that he wants to WebGL. How fdo to check if this option is enabled, or how to get it... or is it something else?Thank youWallt
-
Center of gravity of a 2D array
Hello! I want to do a sub - vi that calculates the center of gravity of the values in a table 2D (I32). Entry: 2D-Array (I32) Output CentroidX (whole I32) CentroidY (whole I32) I found this code on the web: FUNCTION centroid, array Michèle = size (ta
-
X 64 tools 8.5 and debuggers
We are X 64 migration debuggers and tools 8.5 on Server 2008 R2 and Server R2 2012 and as such would like to know its compatibility on the aforementioned platforms.
-
Upgrade to the 32-bit Windows Vista to 64 bit Windows 8 Pro home?
Hello I read that it is possible to do an upgrade of your windows, Windows 8 Pro for $ 39.99. I have Windows Vista 32 bit, it would be possible to do the upgrade to 64 bit Windows 8 Pro? Thank you!