pls help me too. cnu93761fd
I forgot my password to open my 110 Compaq. CNU93761FD.
Try Mike.
e9lofxg38t
Third letter lowercase l.
REO
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.
Tags: Notebooks
Similar Questions
-
I use microsoft Windows xpsp3 teacher that my question is wn I install winxp after 6 months that my hardware (motherboard) will be too bad so I'll be changed motherboard so I can use my OS still this material, I've heard could not appu .so wy use winxp.so me.pls help
You can reuse your current XP only if the version is not OEM. OEM is a version that must be supported directly by the manufacturer of the computer first. OEM is always linked to the first PC, the license is activated on. This license is suppused to 'die' with the PC. Now, there is a "grey area" on the definition of a PC, but accepted the more common definition all came to the conclusion that the 'mother' is the building block for the definition. Therefore, change of motherboards would mean you have a "new" PC
-
My pictures just disappear when I unlock them? pls help, do not know too much about photoshop ^^
Hi Sebastian,.
Please post your request in the appropriate section: https://forums.adobe.com/community/photoshop
Kind regards
Rahul -
minimize, maximize the task .bar and close icons are missing.pls help.
my homepage is google.but when I open firefox, I don't see it.i can't see maximize minimize andclose icons too. pls help.
You can be in full screen - hit F11. It is re - appear?
-
Hello
My computer is HP 430 Notebook PC. This is a brand new. but I did not get any CD driver with him. while I downloaded all the drivers for Windows 7 Ultimate 32 bit on HP official website. There is a driver called as below...
So I press start to update the BIOS. at that time there than in the red question marked area (?:?) got the massege "do not shut down the PC when the update is complete" like that.
during the update my PC has low power. Then it's the exit ramp.
Now the problem is when I turnon my the computer power light but no display no sound, nothing comes on the screen. I think that the BIOS has been deleted or corruption. pls help me to do something about it. It is very useful for me
Thank you everyone
Looks like this power loss that happened after that BIOS reflash had progressed too far to recover, you may need to have HP reflash the BIOS eprom in their establishment. Call HP and ask them how to get it. Since it is still under warranty, you will not have to pay for the fix.
-
I need some serious help here as soon as possible, I can't reach all my friends with Q10 and Z10 by bbm normal message on my 9900... It will always bring X nothing I try to send them a message bbm nomal and Pings. I will receive their own message, but my own come deliver it to them, I will also see their updates of the pm and the will to see mine too. Pls help me.
Hello tooblackish
Welcome to the Forums of the BlackBerry Support
Sorry for the trouble, but I noticed this same problem with few other users, who could not send pings to any BlackBerry 10 there BlackBerry 7 devices.
To solve your problem, I suggest to re-install BlackBerry Messenger! To do this on your homescreen go to Options > device > application > locate and remove BlackBerry Messenger from there. After deleting to do a battery pull reboot as this device powered on remove the battery wait a min. then reinsert back.
KB10040 : How to display or remove installed application on a blackberry smartphone
Finally, after the reboot, use your BlackBerry browser and go to www.blackberry.com/bbmdownload and download the latest available for your phone model. If device reboot prompt do then sign in with your ID BlackBerry even.
Try it and tell us how it goes.
_______________________________________________
Please note:
If you encounter BBM7 or higher then your BBM Contacts are integrated into your BlackBerry ID after installation when you log in with your BlackBerry ID Contacts is restored back, but if you experience any previous Kathy then first make a backup local, you can save on your press card, see this KB for additional assistance
KB20554 How to back up and restore the BlackBerry Messenger contacts list
-
Pls HELP blackBerry smartphones! BB 8520 froze
- My BB Curve 8520, carrier is Vodafone in India froze.
It happened when I was upgrading level player id calling & mobile applications of SFC.
The screen froze showing apps "allow / deny". mobile SFC.
I removed the battery like the sim & reinserted, but to no avail.
I even tried to upgrade the software through web... but can't too.
PLS... PLS HELP!
When I say "until the handset lights up completely" I mean wait until the loading bar is complete and you are really looking to your homescreen.
-
problem with my cd/dvd drive... pls help!
I have windows 7 ultimate! I have problem with my hard drive! I use lg drive and all of a sudden it reads only the CD-ROM and the dvd rom no! its disturbing me a lot! pls help! Thanks in advance
Hello
Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of
themselves at the start because they will be competing for resources. This does not mean that this issue has been
caused by those, however, it's a possibility depending on which and how many you have installed.You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
correctly.Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.
Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.
CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
tolerances. They may be delivered, but it is generally more economical to replace the disk.Several good info here:
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014-------------------------------------------------------------
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================================
After the foregoing:
References to Vista also apply to Windows 7.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The DVD player does not work after installing Windows 7
http://support.Microsoft.com/kb/975270/The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry settings for your
CD/DVD drive someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays
all devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
PLS-00123: program too big error
Hello
We were making a ' PLS-00123: program too large ' error when compiling a package particularly important on a * database 11 g *. The package has about 15000 lines of code. We are compiling the package using a third-party IDE (PL/SQL Developer).
I crossed to AskTom note (:11:0:::P11_QUESTION_ID:571023051648) and Metalink Note #62603.1, http://asktom.oracle.com/pls/asktom/f?p=100 who helped understand the problem. However, could not solve the problem since the change in the structure of the package was not an option.
One of the team contacted a DBA in this respect, which, in turn, suggested that we compile the package in SQL * more. We did as suggested on a * client 10g * connected to the 11g database and the package was compiled.
I do not understand why we met with the error when compiling the package in PL/SQL Developer, but not by doing the same thing to SQL * more. Can anyone please explain this or point out some useful documents?
Kind regards
OusseniHope this link helps...
http://forums.allroundautomations.com/UBB/UBBThreads.php?UBB=Showflat&number=10265&PHPSESSID=2e3c1b028a66500ae8a1730abc88b993
-
PLS, help me to reset safari on mac Ox: 10.11.5
PLS, help me to reset safari on mac Ox: 10.11.5
What do you mean by reset.
-
I earsed my hd and now im trying to reinstall, but an error has occurred during installation, which means that I can't reinstall osx again. PLS HELP!
Please tell us how wipe you the drive and how you tried to reinstall OS X. And what was the error, and how he help you trying to reinstall OSX again? You can look at writing an effective communities of Apple support question before you answer because we are not spirit or psychic readers.
-
I get this message when I turn my macbook pro on "there is no set of application to open the document"stream_000b.strings ". "How can I get rid of him. pls help
Check preferences system/users and groups to see if this item is in your login items. If so, select it and use the sign less to remove.
If she is not there, see if you can find the file by using one of these programs. If you go Finder/display/show bar path, it will show you where it is located. You can then remove it.
-
My Fire Fox download video in support not detected on you tube. It is always shows only the first video that i was downloaded.pls help
I don't think there is much you can do about it outside the use of workaround to reload the page until this problem is corrected.
There is this bug on this problem:
I don't know if other extensions download suffer from this issue, as well, so you can try a little more try the website of the add-on and if possible use a different format like WebM, if they are available.
Also note that not all videos are downloaded and registered correctly. Some may have a size of 0 bytes and fail to download, so, best is to check in downloads of the toolbar Manager in the drop-down list to make sure that the file size is correct (i.e. neither 0 bytes, but a more likely size).
YouTube streaming makes changes to the code and the way its web pages work, so extensions can fail at any time.
-
My Ethernet port is not running iMac mid 2011. Pls help me.
Hi, I have an iMac 21.5 "mid-2011. My Ethernet port is not working. Is this a software problem? Pls help me.
Try resetting the SMC reset management system (SCM) controller on your Mac - Apple Support
Try another ethernet cable.
He still does not? A report with the information more wrote an effective communities of Apple Support question
-
PProblem with my iPhone 6s, while charging or using internet, it rejects higher amoun of heat! Pls help me...
Certain amount of heat is normal using a particularly intense use as a streaming video
Can I restart a Force
Restart your iPhone, iPad or iPod touch - Apple Support
If the problem persists
An appointment of 'Genius' to an Apple Store, or select another authorized service provider.
Maybe you are looking for
-
How can I recover my software of audio output?
I uninstalled my software of audio output by accident because a message came saying that a certain type of file couldn t run because of it so I uninstalled but I didn t know what it is that I uninstall and I put t know how to get back it or down load
-
The computer screen which extends to the tv
I used to be able to connect my laptop to my tv by connecting the laptop to the tv with an S-video cable, by clicking on the Windows by clicking on «Connect to external display» Mobility Center For some reason, when I do that now my laptop screen goe
-
HP Ntebook PC D1E01UA #ABA 2000: new processor for laptop HP 2000-2c22DX
Hello I searched all over the internet to see if I can improve my (microprocessor) Processor, but it seems that there is no one who has this problem. So, I would like to know if I can improve my 2020 m 2.40 GHz intel pentium to a core i3 or i5? I use
-
change OS from vista to XP in HP Pavillion Model a6611me
is it possible to install XP HP Pavillion Model a6611me that I find all drivers for Windows XP. can any bodu help me on what I am facing problem in using vista.
-
Hello I have a 64-bit windows 7 with the following errors: On the Intune Console, I get the following: On the computer logs, I get the following errors: Product: Microsoft Online Management Agent Installer - error 1714. Cannot remove the older versio