Pls need your urgent help - DVD player is broken

Similar Questions

• I need your urgent help

  I need help to solve a problem, I met when working on a laptop of Omatek that had a problem starting. So I decided to format, but the CD ROM drive had a problem so I decided to format it with a computer toshiba laptop, install the same operating system that was windows XP and it worked, but it created another problem when I took the hard drive of the laptop Omatek bak, he refused to start completely as it will start the start and turns off because it displays an error message that he met a problem. So I decided to fix the CD ROM drive in the laptop of Omatek to reformat, but every time I start the sytem and try to format, it will tell me that it cannot find any disk hard even if my configuration also shows that it clearly identifies my hard drive and the CD ROM drive

  The Windows installation CD is ill-equipped to deal with SATA drives, and this is why it does not recognize the HARD drive.

  You will need to enter the BIOS on the system and temporarily change the access mode to the HARD drive to something that includes the installation of XP CD, install your XP, then you can change the BIOS settings back to what they were before you changed.

  This means that if you make settings of the BIOS, you must write them, so you can change them back.

  Here are my instructions for general use for these situations:

  When you see messages like this:

  Setup cannot continue.  To quit Setup, press F3.

  or

  Setup did not find any hard drives installed in your computer.

  Make sure that the hard drives are powered on and properly connected to your computer, and that any hardware configuration of the drives is correct.  This number involves running a diagnosis provided by the manufacturer or the installer.

  When you see a message like this, obviously the XP installation starts to load, but then when the installation program needs to go out and find your hard drive is not find the hard drive.  It means not necessarily your hard drive is defective and if it worked before, it's probably still plugged.  It simply means that the installation of XP is not able to find it.

  Looks like you need enter the BIOS on your system by pressing the 'Delete', F2, F10 or F12 key (what the key is good for your system), find the section where the types of hard disks and hard disk interfaces are configured and temporarily change the setting so the XP installation is able to find the hard drive.

  Where to find the accommodation and how to change depends on your system manufacturer and the version of the BIOS, so you end up having to look at her.  If you know your system brand and model, we can probably help you find a job.

  You must locate and change the interface mode to your hard drive in the BIOS so that when installing XP loading, it will be able to locate the hard drive.

  Before making adjustments, you should take note of what are the current BIOS settings, so you can change when you are finished.

  The adjustment varies so here are some examples that I have accumulated:

  The adjustment is done in the BIOS and could be in Integrated Peripherals, Configuration of SATA, SATA Mode device.

  Make a note of what the current settings are so you can change them back if things get worse before making any changes.

  After you make the changes, save them and see how things look now.

  If you find that the mode is set on the RAID/SATA mode, change the IDE mode.

  If you find that the mode is set to SATA, change the IDE mode.

  If you find that the mode is set to SATA, SATA mode off.

  If you find that the mode is set to AHCI, change the ATA mode.

  If you find that the mode is set to AHCI emulation Mode, change the IDE emulation mode.

  If you find that the mode is set to SATA, SATA mode off or change the ATA mode.

  If you find that the mode is set to SATA Native Mode, disable the native SATA Mode.

  If you find that the mode is set on AHCI/RAID Autodetect, change the combination mode.

  If you find that the mode is set to automatic RAID/AHCI, change it to RAID Auto / ATA

  The WWW says it works on some Dells: "I had to put my SATA ATA instead of AHCI operation."

  After completing the settings, ACCEPT and SAVE changes and reboot the system and see if it will now boot on the CD from Recovery Console.

  Here are some additional ideas on changing the BIOS to recognize the SATA drive to boot and install from CD:

  http://www.mydigitallife.info/common-troubleshooting-methods-when-OS-install-unable-to-detect-SATA-harddisk-drive/

• Want to M4 1015: I need to install a dvd player, and I have no HP recovery Manager and

  How do I reinstall my dvd player if I don't have HP Recovery Manager.

  Found the Power DVD software that came with laptop at this site

  h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-118312-1 & cc = us & dlc = en & lc = en & jumpid = reg_r1002_usen_c-001_title_r0001

  

• Adobe Acrobat Pro DC: impossible to validate the serial number. [was: NEED of URGENT HELP]

  I recently bought Adobe Acrobat Pro DC ( order number: 12152877759) for Mac. I followed the steps to download the program. When I got to the page of the serial number in the installation steps, a yellow massage appears at the top of the page with: «we are unable to validate the serial number of Adobe Acrobat.» PLS, contact Customer Service"before I get the serial number. When I entered the number sent by e-mail at the front desk, the same threshold of top massage of the page without any progress.
  

  I have tried several times to uninstall all files related acrobat, reboot the system and download the program of link Download Pro or Standard versions of Acrobat DC, XI or X But same problem repeated itself. I also changed my Adobe account & used a new and still the same problem accrued. I have raised the issue of yesterday & had been connected with meenakshin83966505 throughout the day without any solution progress & it you end up with this massage (if you get the error message, you must Contact Customer Services.) Sign in using your Adobe ID and then select your product from the list. Then select chat option under "still need help? Contact us"). Since last night, so far I have had no response or connected with someone to help solve this problem.

  I paid US $ 450 to buy this product and can not use it to unknown and no problem supported with it!

  I need to get an answer, how to solve the problem and that the program works. or els I have to repay my payment. Fast action is much appreciated.

  Thank you

  Hi Rajshreeb,

  They have already called & solved the problem online. It was really very useful.

  Thank you very much for your positive support, I really appreciate it.

  REDA

• Need your expert help...

  Hello

  

  The screeshot above shows a gap. At the top of page 2 (front), there is a permanent single line of the paragraph on page 1 (arrow in attachment). I need a script to identify such cases throughout the document. It is possible find and alert pages use this kind of orphans by Javascript. He was aware of a paragraph if single line comes in the document.

  I'll take the no. page 1 lines and can compare with page 2, if all lines are from page 1, then count the lines, whether it will be greater than 1, then alert orphan. Maybe that's what I think about it for the script.

  I expect a solution to this problem on your part.

  Thanks in advance

  Hmm, works very well for me. Either your document contains something that I have not taken into account, it is related to the changes made between CS5 (you seem to be running) and CS3 (which I am still on) which would be difficult for me to solve the problems. Oh and the new code replaces the old code entirely, do not put the old and new versions in the same file.

• Tecra M1: Need a compatible CD/DVD player

  Hi guys.

  I have a second user M1 windows XP SP2, the dvd - rom drive has been temprmental (sd-2612)
  I tried a cd-rw/dvd-rom sd-r2512 by exchanging the caddy, but it does not recognize anything in the Bay.
  Start gives ide #error.

  If it's not compatible, is there a list somewhere that I can refer to, to make sure I get one that is compatible?

  Thanks gerry

  When it occurs IDE there is certainly a problem of compatibility and the assignment of pins is not the right one. Just FYI: I'm using on my Tecra M1 TEAC DW 224th DVD - ROM drive and it works perfectly.

• BlackBerry smartphones, I have NEED of URGENT HELP *.

  MY BLACKBERRY 2 HAVE THE SAME PIN, AND I NEEDED LUCK FORMER BB PHONE PIN CODE TO A NEW... HOW CAN I GO?

  Two devices cannot share the same PIN. Each device is assigned its own unique PIN code before leaving the factory. If you have two devices with the same PIN, one of them is a counterfeit device.

  See you soon.

• Need urgent help with the startup of the database

  Hi all
  
  I use oracle 10g on 32 bits of windower server.
  
  I try to start my database today and it gives me error, and that's my production database.
  I need very urgent help you. (I have no rman backup, and data are not n6cessoires so, since it is the practice of the student).
  

  SQL> startup open
  ORACLE instance started.
  
  Total System Global Area  524288000 bytes
  Fixed Size                   790180 bytes
  Variable Size             250343772 bytes
  Database Buffers          272629760 bytes
  Redo Buffers                 524288 bytes
  Database mounted.
  ORA-01110: data file 34: 'G:\ORACLE\DATAFILES_ACADEMY\ACADEMY'
  ORA-01115: IO error reading block from file 34 (block # 1)
  ORA-27070: async read/write failed
  OSD-04016: Error queuing an asynchronous I/O request.
  O/S-Error: (OS 23) Data error (cyclic redundancy check).

  Kind regards.

  Maahjoor wrote:
  Hi dear,

  I need further assistance on your side, I restarted the server, but the same problem.
  as there is a way to drop and re-create a system tablespace? given that the 34 file belong to the tablesapce system.

  concerning

  N °
  So just create a new database. Who will have every ten minutes. And to say that your students to create new storage spaces. Who will be the two minutes.

• What do I need read a dvd with my MacBook Pro without the real DVD player?

  What do I need read a dvd with my MacBook Pro? As such things do I need?

  A dvd player

• Re: Satellite M30-107 - new compatible CD/DVD player

  Hello
  I need to find the DVD player that is suitable for my M30-107 sSatellite, can someone help me please?
  What is Teac dv-w22e?
  The original was Mat * a dvd - ram uj820s, but do not know where it would be possible to get it from...

  Thank you very much for your help!

  Hello

  (Page 4 to page 7) user manual contains information on the supported players!
  Looks like you didn't she check properly.
  This readers seems to be compatible:
  * UJDA750 *.
  * SD-R6012 *.
  * UJ-811 *.
  * DV-W22E *.

  You can find this number in google to get a...
  Otherwise, you may contact the ASP in your country for this player compatible

• Recovery without DVD player?

  Hello.

  My older laptop needs a recovery but my isn´t DVD player no longer works. I have still my 2 recovery discs.

  Is there another way I could transfer the data from the discs to another device as a USB - Stick or USB Ext. hard drive? Or do I need to buy a DVD player?

  It would be great help.

  Thank you

  Michael

  Hi Michael78,

  Interesting to know which laptop would be, you have exactly, but if your CD/DVD drive isn't working, you need to replace the CD/DVD drive. T, you can copy files to another device, and then start the installation.

  Usually a new drive you can order from a supplier of service authorized in your country. Simply contact the guys, they will help you. You'll get a compatible drive guys because not all readers are compatible with all laptops.

  Good luck! :)

• a second dvd player for the G3620

  I need to install a dvd player for my G3620 in the second Bay.  There's a metal fence (just behind the door at the front of the box) which must be removed to open the Bay.  Y at - it something to remove the metal grill?  Force at, or is there and easy way (course)?  I don't want to break anything.

  Thanks for your help!

  I figured out how to do this. I created a procedure in pictures at the following YouTube, location including:

  http://www.YouTube.com/watch?v=c2NyGgwkVOA&feature=youtu.be

• Change DVD player

  I need to change the dvd player in my Pavilion 1010z and seeks to the Lite-On iHAS324 DVD 24 on newegg.com.  can someone tell me if it works on my pc?

  Hello

  As long as your existing CD/DVD drive is connected to the motherboard via a SATA cable (or you have a free SATA connection on your MB you will be fine with the reader, that you intend to buy.)

  Hope this helps,

  DP - K

• Find a DVD player that is compatible with my remote

  Hello

  My DVD player is broken, and I would like to make its remote available on E - Bay or other.

  As usual, the remote control is compatible with several models. How to know the list of these models?

  The reference on the remote is SE-R0049.

  Thank you.

  To be honest I do not understand your problem.
  Do you need new remote control or what?

• Satellite P200-1EE: issues of HD - DVD - how to upgrade an HD-DVD player?

  Please excuse this if it is a basic question, but I'm still learning to use the P200 and find my way around Vista.

  I have problems with HD-DVD not playing does not and have downloaded a file
  hddvdpl-20071214135201.
  It contains 14 files and folders. One click to start the upgrade?

  I also checked the version of the driver for TS-L802A and seems to be day 21/06/06 6.0.6000.16386

  Any help please.

  Downloaded files of the HD-DVD drive is only an update. It s not a full version, and therefore, you'll need preinstalled full HD-DVD player.

  One question; did you find a .exe file in the downloaded folder?
  Please check and if necessary enforce it.