Plug a USB [Fixed]

Similar Questions

• Problem syncing cell to pc "when I plug the USB cord nothing happens."

  Original title: Cell synchronization to pc problems.

  I have Windows Vista and I downloaded the pantech link (p7040) pc suite to synchronize my phone to the pc and when I plug the USB cord nothing happens. The toolbar does not show that something is plugged. What should I do?

  Hello

  Thanks for choosing Microsoft Community.

  Please answer these questions:

  1. have you already tried it with different USB ports / cables?

  2 have you tried it on another computer?

  Let us try these steps and see if that helps:

   

  Method 1: Try again with different USB ports and if it recognizes the phone.

   

  Method 2: Run the following fix - it:

   

  Hardware devices do not work or are not detected in Windows:

  http://support.Microsoft.com/mats/hardware_device_problems/en-us?WA=wsignin1.0

   

  Method 2: Delete all the USB controllers and see if that helps:

  See the following steps:

   

  a. Click Start, type run, select run, type sysdm.cpl in the Open box, and then click OK.

  b. click on the Hardware tab.

  c. click the Device Manager button.

  d. expand Bus USB controllers.

  e. right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  f. restart the computer and wait for windows to reinstall the USB controllers.

  g. plug in the removable USB storage device and perform a test to ensure that the problem is solved.

  Hope the helps of information. If you need help, please reply. We will be happy to help you.

• When I plug the USB FLASH drive into the PC it does not appear in the computer

  I have a USB Flash driver: Team Fusion more 4 GB

  Like this one:
  
  Same color and this one exactly.
  and when I put inside my computer I hear the BLOOP sound when I insert it and also when I go out, I hear a noise... but when I go to my computer it does not appear...
  It worked before, I inserted my USB Flash driver inside my computer... then when I right click on a file inside driver flash my computer got stuck and I force restarted my PC with exit it restarts normally and after that it doesn't work any more I just hear sounds when I insert the USB key inside and outside.
  I tried things.
  -Troubleshooting and it didn't help me at all... He didn't show me something when he finished it.
  -Tried restarting the computer and access bios and active in the advanced settings in the number 3 to USB - ZIP
  -J' inserted behind my computer and also in front of the computer USB flash driver.
  -Computer all analysed in depth scan with Advanced System Care Pro 5.4 and did not help even after a reboot.
  -Tried to reinstall the driver for the "Device Manager" USB flash drive
  -IMPORTANT! I tried to plug this USB on another computer and it arises there, but could not access the USB key, I tried to format and it says error and he said that he could not format... I tried to format it in NTFS, fat32, with formats fast and quick, but nothing has worked.
  SO the problem is with the USB FLASH DRIVE! not the computer...
  Help me please :| What should I do?
  Image when my USB driver is inside my computer:
  Open the image in a new tab to see full size image.
  Picture that shows that I reinstalled the driver for my USB Flash drive:
  

  Yes man, he is in disk management. I tried to do a right click on it and clicked on «letter of change of driver and paths...» "and it came up with error... Look man, I fixed that by myself... the flash disk is cool now xD you know what I did? I just went to my dad's pc... I tried to get the DRIVER USB FLASH, but he came up with the error and asked if I want to format it... I clicked format and it didn't work... I tried NTFS, FAT32, format not quick and fast and nothing worked... it was still * place... so what I did? I downloaded "HP USB Disk Storage Format Tool 2.2.3" of http://www.softpedia.com/get/System/Hard-Disk-Utils/HP-USB-Disk-Storage-Format-Tool.shtml here and then I formatted it with success! and then the flash driver disk worked on my dad's computer but when I tried to connect it to my pc, it does not appear lol but it worked on other computers, so it's cool: P I just going to format my PC: P it works now with the USB HP program disk formatting tool. only does not not on my pc, but it's ok... I formate my pc. :)

• Windows 7 Starter Edition ignoring newly plugged in USB 2.0 optical drive

  My system is as follows...

  ASUS EeePC X101CH
  Intel Atom N2600 processor. 1.60 GHz
  1 GB OF RAM
  Windows 7 Starter 32-bit
  Service Pack 1
  .. .and I try 'plug & play' the next optical drive...

  Blu - Ray Burner laptop Samsung SE-506CB/RSBDE (USB 2.0)
  .. What is completely ignored.  I tried to put disks in there - the drive open and close and spin upward, as you would expect, but it is completely ignored by Windows!  Plug the USB cable produces no response - not even in the Device Manager.  USB plug & play works great on other things, like drives flash, mouse, etc., but not on this.

  It's the third optical drive to external USB 2 I've tried.  The first two were a lesser specification, and I picked up their very cheap, so I thought "you get what you pay for", right?  The first was dead as a stiff - it has absolutely nothing, so I threw.  The other triggered at least detection code plug-and-play USB, which is supposed to install automatically - but he did not install correctly in the end.  After trying and trying... and leave it plugged during the re-booting, etc...  All to nothing does not.

  So I decided to buy this last Blu - Ray USB external hard drive (which cost more than twice the two other combined!) thinking this will surely work correctly at least.  But Windows 7 does not yet seem to shake hands with her!

  Anyone have any ideas?

  Thanks a lot for this amazingly comprehensive reply Hakanwar!

  I was fine it and found it very informative.  Some of the avenues I had already tried, and some I consider even earlier.  I'll keep your answer and refer to it if I have a similar problem again.

  But, alas!  The case seems to have fixed itself somehow the new optical drive has finally been detected and I've been able to tell, it is fully functional!  I'm still trying to understand what I did to make it work.  What I did (in response to a suggestion that I've seen in a community post on a related topic) was to download a few utility programs (DevManView and USBDeview) of Nirsoft.com and run them on my system.  I then connected the optical drive via its microUSB cable once again and - Lo and behold! -He was there, and I was running!  Common sense would thought he could not have been the utility programs that makes the disc visible.  So all I can think is that maybe the USB cable not had not been connected properly when I tried earlier.  I remember try several times, and the Clank of the connection about to ensure that she was sitting properly.  But it was not only detect.  Maybe there are 2 'stages' or 'steps' to this type of connector, because (I'm not sure), but it could have a little more deeply he did before and more firmly in place.  I can't just be sure - and now I'm almost worried to disconnect in case he stops working again!  It makes me feel like a fool, if this is really the cause of the problem.  But it's weird, because the road turned upwards before and LED to this subject was the lighting, but it was as if she wasn't there that Windows is concerned.

  In any case, thank you for your kind assistance and the other guy who suggested the Nirsoft utilities - they could be useful in the future, because they are waaaaay more complete than Device Manager.

  Concerning

• Is it possible to plug a USB to my new iPad Pro, to transfer PDF files and some Jpeg files from the USB key with an adapter of lightning? If there is NO adapter, how can I get these files on the USB key and my iPad pro?

  Is it possible to plug a USB to my new iPad Pro, to transfer PDF files and some Jpeg files from the USB key with an adapter of lightning? If there is NO adapter, how can I get these files on the USB key and my iPad pro? I need these PDF files transferred my I touch pro. Any suggestions?  Please

  Thank you

  Mike Tingey

  The iPad does not support USB keys. There are some wireless flash drives that can be used, but not the classical records. I suggest you transfer files to a computer and their synchronization then back to the iPad via iTunes.

• Satellite L40 psl48e died because I plugged the USB hard

  do not laugh...
  I plugged a USB stick in the wrong way... and the laptop died... suspect anyway... there at - it internal fuses?

  Hello

  Internal fuses? The motherboard is dotted with many electronic and fuse pieces
  I think that something is damaged on the motherboard.

  But I can't believe how someone could connect the USB in the wrong direction
  Truly amazing what s

  However, it looks like a material damage and I think you should contact the ASP technician to check the laptop

  In the worst case you will need a new motherboard that could be a costly affair :(

• Restore the options popup after selecting "Non-action" and choose to use this option, whenever a device is plugged in USB?

  Restore the options popup after selecting "Non-action" and choose to use this option, whenever a device is plugged in USB?

  Hello

  Did you follow the "AutoPlay Repair Wizard"?

  You can follow the link provided in the previous post. Later, check to see if the problem persists.

  Hope the helps of information.

• Blue screen after plugging of USB 3.0 devices.

  I have a problem with my USB 3.0 port. I tried to plug a USB 3.0 hard drive in my 3.0 port and every time I do it the blue screen of death (such as joint below) rises. I plugged a different hard drive USB 3.0 in that port with the same result. I note that peripheral USB 2.0 are causing this problem, and that it do not connect any device (including this hard drive) on my other USB port (which is 2.0).

  I tried to update the driver software for all my USB drivers, but no updates have been found.

  Any help on the matter would be highly appreciated :)

  

  Thank you!

  The two attached DMP files are error checking SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e) .

  A system thread threw an exception that the error handler did not.

  Usual causes are a bug in a device driver.

  If we take a look at the call stack:

  0: kd > kv
  Child-SP RetAddr: Args to child: call Site
  fffff880 '089606 a 0 00000000' 00f8009e: fffff8a0 '0378ecc2 00000000' 0000000f 00000000 00000000' fffffa80' 041afe80: rusb3xhc + 0x1c2dd
  fffff880 '089606-8 fffff8a0' 0378ecc2: 00000000' 0000000f 00000000 00000000' fffffa80 '041afe80 fffff880' 0777af7b: 0xf8009e
  "fffff880' 089606b 0 00000000' 0000000f: 00000000 ' fffffa80 00000000 '041afe80 fffff880' 0777af7b fffffa80 ' 041afe80: 0xfffff8a0'0378ecc2
  fffff880' 089606b 8 00000000 00000000': fffffa80'041afe80 fffff880 '0777af7b fffffa80' 041afe80 00000000' 00000000: 0xf

  FAILURE_BUCKET_ID: X64_0x7E_rusb3xhc + 1c2dd

  We see mention of rusb3xhc.sys which is the Renesas Electronics Corporation USB 3.0 Host controller driver. Have you checked the support of Samsung & site drivers to ensure this driver is up to date? Yours is dated 2011:

  0: kd > lmvm rusb3xhc
  start end module name
  fffff880 '0775f000 fffff880' rusb3xhc T (no symbol) a 0779, 000
  Loaded symbol image file: rusb3xhc.sys
  Image path: \SystemRoot\system32\DRIVERS\rusb3xhc.sys
  Image name: rusb3xhc.sys
  Timestamp: Thu Sep 14 21:15 2011 (4E715194)

  If you're sure it's up-to-date, it is possible, another device driver is in conflict and bringing to the fault, so here are my recommendations:

  1. remove and replace AVG with temporary Microsoft Security Essentials for troubleshooting purposes:

  -AVG removal tool http://www.Avg.com/us-en/utilities

  MSE - http://windows.microsoft.com/en-us/windows/security-essentials-download

  2 in your list of drivers loaded, dtsoftbus01.sys figure who is the driver for Daemon Tools. Daemon Tools is a very popular cause of BSOD in 7/8 base systems. Please uninstall Daemon Tools. Alternative imaging programs are: MagicISO, Power ISO, etc.

  Kind regards

  Patrick

• I plugged my USB Modem to the computer, it's MMX352G micromax modem. After you connect to the internet, all browsers open the pages of the BM, but in the taskbar sign of the network is to have a red cross. Why?

  I plugged my USB Modem to the computer, it's MMX352G micromax modem. After the internet connection all browsers open the pages of the World Bank, but in the task bar sign network is to have a Red Cross and when I go over it, it says not connected, but I can always use internet in my browsers. Why? It causes an adverse effect on my computer.

  Hi Akash,

  Welcome to the Microsoft community. According to the description of the bar icon problem tasks of the network have a red x, but you can still access the internet. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         You use a third-party security software?

  I suggest you follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Startup options (including safe mode)

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 3 from the link to start the computer to a Normal startupmode.

  Method 2: Follow the steps in the article.

  Windows wireless and wired network connection problems

  You can read this article for more information:

  How can I troubleshoot network card?

  I hope this helps. Let us know if you need more assistance.

• Avoid opening every time Lightroom that I plug a USB device into my Windows 10 machine?

  Hello

  I've recently upgraded to win 10 and now I have Lightroom CC opening every time I plug a USB key in my machine regardless of what is on the USB device. I tried to disable all the options in Lightroom without success and any internet help either gave no results. It is extremely boring and tedious since most of my USB devices have nothing to do with my photos!

  Kind regards

  Mirko

  Hello Sarika,

  As I mentioned in my post, I had already tried that I tried and it does not solve the problem. The solution is to disable the USB AutoPlay feature in Windows 10

  Kind regards

  Mirko

• How can I stop lightroom to launch whenever I plug a USB key?

  I already disabled 'Show' import dialog when a memory card is detected in Edit > Preferences.  But Lightroom opens whenever I plug a USB key.  WTF?  It's maddening.

  You can check: Lightroom: how we prevent Lightroom to launch when I plug my card reader?

• Lightroom starting when I plug a USB key

  Hi all;

  How can I stop Lightroom starting when I plug a USB key?

  I can't fins any solution within the parameters of Win 7.

  Thank you

  Maarten

  Lightroom preferences (general Board). You will find an option called "see the import dialog box when the memory card is detected." Uncheck the box.

  

• Status of work to fix Snow Leopard/HP printer problems when plugged in USB airport

  An analysis of this forum reveals that it is a problem spanning many printers. Can anyone provide an update on how it's going between Apple and HP to solve this issue?

  I can confirm that the above method of the Mac HP architect works for me with a few differences.

  His position is at: http://discussions.apple.com/message.jspa?messageID=10295130#10295130

  Note I have a P1505 connected to an Airport Express USB 'g' and my network is managed by a station Airport Extreme Base "n". When I did my port scan I found the port 'hp-pdl-datastr 9100.

  Following the instructions for using the HP Jetdirect - Socket address of my printer looked like this: "HP - LaserJet.local:9100.

  The URL appears in the title of the info from the printer is now "URL: socket://HP-LaserJet.local:9100 / '.

  My P1505 is again wireless printing! It will probably work for the P1006 P1005 as well.

• iPnone 4 s recognized do not want dv7 - 7333cl rnning Windows 8 when it is plugged into usb port

  Laptop does not recognize the iPhone 4S when plugged into one of the 4 usb ports. All the usb drivers are up-to-date. All the udates win 8 and HP have been installed and are ongoing. Ports recognized so sticks of memory seem to work. Is there a special driver needed for iPhone?

  Hey texasbootz,

  I'll have you to answer a few questions to understand exactly what is happening:

  1. When the iPhone is connected to the laptop, there is no pay?
  2. When the iPhone is connected to the laptop, it appears in Device Manager?
  3. ITunes is installed?

  If she is not charged when it is connected, it is possible that the cable you are using is not working properly, and you may need a replacement. Alternatively, the iPhone itself is having a few problems.

  In any case, given that the other devices work in all of your USB ports, it is possible that its a software issue (with pilots from the iPhone) or a problem with the case of the iPhone. You will need to contact Apple for support on any of these questions. I suggest try to re-install / install iTunes, see if that fixes it, then contact Apple.

  I hope this helps!

• Windows Vista does not recognize my camera when plugged into USB port

  I recently had a problem with updates do not install it on my laptop Gateway 6840 running Vista. Community Microsoft guided me through a process that solved the problem and it worked fine. However, later, I tried to plug my Fujifilm AX560 into a USB port and the computer is no longer recognized. Ports recognize my memory sticks though very slowly. I tried a lot of previous solutions on Microsoft Community, but nothing has worked. Appreciate any help.  Thank you.

  Problem solved! I used sugestion of Shekhar S to use Microsoft Fix It only the second I had my camera is plugged in and turned on. Thanks Shekhar S and thank you Microsoft Community.