"Plugin - container.exe has stopped working" error during installation of Firefox 36.0 via SCCM if Firefox is open during installation.

Similar Questions

• applephotostreams.exe has stopped working error message

  I get the following error message every time that I reboot - it started after MS Update on 23/08/2012:

  IN MICROSOFT WINDOWS BOX:

  applephotostreams.exe has stopped working error message - a problem caused blocking the program works correctly. Windows will close the program and notify yu if a solution is available

  This is a link to the solution I found that worked for me...

  applephotostreams stops working

• "MessagingApp.exe has stopped working" error when I turn on the computer.

  In the last few days I have been making a "MessagingApp.exe has stopped working" message every time I spend on the laptop. When I go to "All programs" all windows and Yahoo programs are red in color. I did a search for "MessagingApp.exe" but it is not found, but when I looked in 'Program Files'-'alternative E-mail' I found it but it will not run. I can't connect to Yahoo Messenger.Can help you? I have Windows Vista Home Edition thank you, McEvor

  original title: error MessagingApp.exe

  Hello McEvor,

  1. don't you make changes to the system before the show?

  2. Since when have you been faced with this problem?

  Try the following steps to try to get the fixed number.

  Step 1:

  Try to put the computer in a clean boot state to see if the same message appears

  A clean boot helps eliminate software conflicts. Visit the link below to learn how to perform a clean boot.

  http://support.Microsoft.com/kb/929135

  Note: Once the troubleshooting is over; reset the computer to start as usual in following step 7 from the link above.

  Step 2:
  An analysis of security and verification for infections.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  1. you can run a virus scan online from the link given below and check if the problem persists.

  Microsoft safety scanner

  2. in addition, make sure that you have installed on your computer, antivirus software was last updated so that it works correctly.

  If the problem persists, please contact support messenger yahoo from the link below for more support.

  http://help.Yahoo.com/l/us/Yahoo/helpcentral/

  Hope the helps of information provided.

• "'Hzuwia.exe' has stopped working" error starting

  Hi, I keep getting a message during startup indicating "hzuwia.exe" has stopped working. Anyone has any idea what this program is and what it is used for everything. Thank you

  I'm not sure about the program.  It may be a vestige of malware that has been deleted by your AV software, with the exception of this part.  In any case, he has almost certainly needn't start at startup.

  Go tohttp://technet.microsoft.com/en-us/sysinternals/bb963902.aspx and run Autoruns and click all.  Search for hzuwia.exe and when you find unxheck the box to prevent it from start to start.  Check the entire list as there may be several entries.  When you're done, click OK and restart.   The message should be gone.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cause green pixels in the clips "first elements.exe has stopped working error."

  I have a PAL - jvc everio camcorder. I copied the files from the camcorder to my computer. My computer is running Vista SP1 with 2 GB of ram.

  The files appear to be imported into PElements 4 However when playing or rendered clips I get an error first elements.exe adobe has stopped working.

  I noticed that the clips have green pixels appear at the place where the PE crashes.  All the clips seem to have this problem.

  I followed the suggestions of the basis of knowledge re: update codecs, disabling startup items, updated video driver.

  I don't have the cyberlink software provided with the jvc. I bought elements of first as I had read that he would be able to read jvc files.

  Someone at - it any other suggestions?

  See this thread... same camcorder... same problem. There are a few things to try:

  http://forums.Adobe.com/thread/389608?TSTART=0

• "Set - up creative cloud has stopped working" error during download

  I get the error message "Setup Creative cloud has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. I am running Windows 7 with Google Chrome browser and my computer stopped randomly when I tried to install.

  Alan, please try to remove the Cloud creative application - https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html and then install it using: https://helpx.adobe.com/creative-cloud/help/install-apps.html

  For the download error try: https://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html

  Let us know if you run in any specific message when installing it. We would be happy to help you.

• All files .exe has stopped working

  Whenever I try to open a program I get the * *.exe has stopped working. This is on firefox, windows media, nero, games player, etc.. The only way for me to open anything it must be run as an administrator will search for virus with spyware doctor™, malicious software with malwarebytes' Anti-malware and registry with Regcure errors. but nothing works any help.

  Here's what werFault.exe said on some programs.

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: Hoyle Puzzle Games.exe
  Application version: 0.0.0.0
  Application timestamp: 562b029a
  Fault Module name: StackHash_6bc7
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception code: c0000005
  Exception offset: 04554e40
  OS version: 6.0.6001.2.1.0.768.2
  Locale ID: 1033
  Additional information 1: 6bc7
  More information 2: f3f6a1403802118ada460cd45530935b
  Information additional 3:6477
  Additional information 4: d34edb9b57aa7d1aac3252e1a9591198

  Signature of the problem:
  Problem event name: BEX
  Application name: FreeCell.exe
  Application version: 6.0.6001.18000
  Application timestamp: 47919e59
  Fault Module name: StackHash_6bc7
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 04554e40
  Exception code: c0000005
  Exception data: 00000008
  OS version: 6.0.6001.2.1.0.768.2
  Locale ID: 1033
  Additional information 1: 6bc7
  More information 2: f3f6a1403802118ada460cd45530935b
  Information additional 3:6477
  Additional information 4: d34edb9b57aa7d1aac3252e1a9591198Problem signature:

  Signature of the problem

  Problem event name: APPCRASH
  Application name: NeroExpress.exe
  Application version: 9.0.9.100
  Application timestamp: 48d36d6b
  Fault Module name: StackHash_6bc7
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception code: c0000005
  Exception offset: 04554e40
  OS version: 6.0.6001.2.1.0.768.2
  Locale ID: 1033
  Additional information 1: 6bc7
  More information 2: f3f6a1403802118ada460cd45530935b
  Information additional 3:6477
  Additional information 4: d34edb9b57aa7d1aac3252e1a9591198

  Exception code: c0000005

  Check please the RAM to find errors. Please download memtest86 + [1] write a new bootable CD (use a CD - RW if possible) of ISO (download and use ImgBurn [2] for this), restart your PC and scan your RAM 4-5 h to find errors.

  André

  [1] http://www.memtest.org/download/4.10/memtest86+-4.10.iso.zip
  [2] http://www.imgburn.com/index.php?act=download
  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Installer.exe has stopped working

  I have the usb of ZTE AC8700 EV - DO wireless modem. It worked fine in xp and vista, but in win 7 ultimate, whenever I try to install or uninstall, it shows a msg that "Installer.exe has stopped working" and the installation program ends.
  even though my device works under the windows built-in network and sharing Center but I can not install software from the company because of Appcrash. This is a prob of service install?

  any expert can help me?

  Hi friend I have solution for the EVDO runtime error.

  1 - Open Control Panel

  2 - go to option of regional languge

  3 - set the language (English-United States)

  4. now you are able to connect via evdo dialer.

  This trick works on my system. Hope it helps u too.

• SQR.exe has stopped working

  Hi Experts,

  I came across sqr.exe has stopped working error when executing programs sqr across the line of control as well as reporting studio,.

  For some programs no error, and for some programs his complain above error after producing an output.

  Could someone help me solve this error.

  EPM installed 11.1.2.3 in windows server 2008 64 bit and using the SQL Server 2008 database.

  Thank you

  Aravind

  found the reason for the accident of the app. Its due to the 'USE database_name' command in the begin-setup section. I don't know why its causing issue. It TR supposed to work for the Sybase and SQL Server database but not work with SQL Server. in any case, I commented on this and gets the job done.

• I received error messages saying that hl2.exe has stopped working.

  HL2.exe has stopped working?

  original title: hl2.exe has stopped working

  Hi 1patrick1!

  Thanks for posting your question.  Here is some important information about the hl2.exe that can help.

  HL2. EXE has stopped working the issue

  Game error: HL2. EXE has stopped working

  Important:

  Please read the FAQ in the link below to determine if your question should be directed to the developer of the game or to the Steam support:

  Third-party game support

  General troubleshooting

  Game crashes can have several different causes depending on your system. The best way to determine that the problem is caused by East follow this guide first:

  Troubleshooting game crashes

  Windows Vista users

  There are several patches available for Vista users and Vista users with Nvidia cards. We recommend that you follow the Guide Windows Vista in its entirety.

  Anti-virus software

  Some software anti-virus and anti-spyware such as Norton/Symantec, AVG 7.5, Avast, Spyware Doctor and Nod32 have been confirmed to cause the game crashes with Source engine games. If disabling your antivirus software or security is not enough, you can consider completely uninstalling these applications until an update is published by the developers of antivirus software that resolves these compatibility issues. More information found in the section troubleshooting game crashes FAQ linked above.

  Background applications

  Graphically intense games such as half-life 2: Episode Two and Team Fortress 2 require a lot of your system resources to operate. Having background applications being run while you play can often result in the game engine competing for resources with other applications system. Often, this can cause the game to crash because it is not free enough for the game to use system resources. Please follow the guide below for more information:

  Disabling background Applications

  It is also important to ensure that your system has enough available expanded memory. Please follow this guide for more information.

  Hope it will be informative for you.

  The respect of

  Anurag Shukla
  Microsoft Certified Professional

• Error message "HPSF.exe has stopped working" whenever I have open hp support assistant HP g6

  I have thought honastly this laptop couldn't be worse. I downloaded the latest version of the hp support assistant after resinstalling windows and all the other stuff of hp and when I try to get updates from hp it comes up with a

  error message saying "HPSF.exe has stopped working" from there he returns constantly with Deputy of support every time error begins.

  Windows 7 64 bit

  Please try to uninstall, download of the last being and resettlement.

  Here is the link to the latest version of HP Support Assistant:

  http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58915.exe

  Here is the link to the latest version of the HP Software Framework:

  http://ftp.HP.com/pub/SoftPaq/sp59001-59500/sp59202.exe

  So here's a support document which guides you step by step: http://support.hp.com/us-en/document/c02435801

• How to install a driver for f4500? Error dot4_plugin.exe has stopped working

  I had this printer HP Desk Jet F4500 connected to my computer laptop operating system windows 7 64 bit for months now, the printer has no drivers and I can't get them.  I went on HP website and downloaded the base and the recommended full downloads and still the same error Stops the installation.  dot4_plugin.exe has stopped working the extent of attributes are inconsisitent.

  Help I am more than two hours in this and don't know where yet.

  I did some additional research on this issue, more specifically the error 'extended attributes are inconsisitent' and found that this seems to be a Windows problem. Here are a few things you can try to solve the problem:

  Method 1: Perform a scan of the file system (CFS) checker on your computer

  Steps to use the SFC/SCANNOW command:

  1. click on start-> click on all programs-> click Accessories-> right click on command prompt-> Select run administrator-> click on continue
  2. at the command prompt-> Type "sfc/scannow"-> press enter
  3. follow on-screen messages to start the analysis of the system (this process can take a long time)
  The following will happen:
  Start of the phase of verification of the scanning system of-> % of full audit.
  4. once the analysis is complete, you will see a message with one of the following:
  a. not found any breach of integrity
  b. find corruption but repaired
  c. corruption that he couldn't fix

  Method 2: System Restore will take your PC to a previous state when the PC worked.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start-> Type "System Restore" in the box start search-> click System Restore listed programs.
  Type your password-> click continue (if you have one)
  2. in the dialog box the system restore-> click on a different restore point-> click Next.
  3. in the list of restore points-> click a restore point created before you started having problems-> click Next-> click Finish.

• Display multiple instances of NTDVM. EXE running in Task Manager and get error ntvdm.exe has stopped working and was closed

  There is also another problem of ntdvm that I meet where the file ntdvm.exe continues to the multiple (i.e. numeorus ntdvm.exe files are running in the Task Manager) to the point where my computer slows down and ends by crashes.

  Very grateful for any solution for every problem!

  I am running vista.

  * original title - ntvdm.exe has stopped working and was closed...?  Recurring problem! *

  Hello

  1. don't you make changes to the computer before that happened?

  2. Once you get this error message?

  I suggest you to try the steps below and check if it helps.

  Method 1: Try scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/929833

  Method 2:

   Also try to set up your computer in a clean boot state, and check if the same issue occurs.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3:

  Try to scan your hard disk from the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Hope this information is useful.

• In Vista, error "FINDFAST. EXE has stopped working and needs to close. "

  I get continually comes a msg as FINDFAST. EXE has stopped working and needs to close. What is this reference to? Liu

  Hi LaurieHead,
   
  -When exactly you receive this error message? It is to start the computer or when starting any application?
   
  We will put the computer in a clean boot state to identify the application at the origin of this problem:
   

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Uninstall Napster - error saying setup.exe has stopped working

  Try to uninstall Napster found on my computer, but get the error message saying setup.exe has stopped working. Please help get rid of Napster!

  Hello

  Follow the steps in the link given below and check if that helps.

  http://support.Microsoft.com/kb/2438651

  If the steps above did not help, I suggest you to install the program and then try to reinstall and check if that helps.

  Hope it will be useful.