plugin VMware update manager returns with "the remote server returned an error: (404) not found."

Hello

We have recently updated our virtual Center Server to version 4 and now when I try to download and install from the page manager plugin vmware update manager plugin is back with "the remote server returned an error: (404) not found"

Has anyone had this problem before and eventually worked out how to fix this?

Gregg Robertson, VCP, MCSE, MCSA, MCTS, MCITP

You are welcome!!

Tags: VMware

Similar Questions

  • Managed server now work: error 404 - not found

    Hi all

    I am very new in this field and you just install weblogic 10.3.3 Server.
    I created a Server Admin and a cluster of two managed servers.
    Server Admin works and opens in the console of the user interface.

    When I start the managed server, this is show in the cmd console
    < Opinion > < WebLogicServer > < BEA-000360 > < server started operation >

    but in the user interface, is to show that:

    Error 404 - not found
    RFC 2068 Hypertext Transfer Protocol--HTTP / 1.1:
    10.4.5 404 not found
    Server not found anything matching the request URI. No indication is given whether the condition is temporary or permanent.

    If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.


    How to start the Weblogic managed server?


    TIA,
    Vishal

    Fix.
    There is no separate UI for managed servers.
    The follow-up, management and configuration on the managed servers, clusters are are using Admin Console only.

    Thank you
    Sandeep

  • Error 404 - not found listenerConfigure but not with the apex page

    Hello

    I just installed the listener APEX 2.0.1 as a stand-alone installation.
    I don't use EPG.

    I get the error 404 - Not Found When I pass in my browser the url:

    http:// < My Server >: 7777/apex/listenerConfigure

    but I have the correct application page when I get home:

    http:// < My Server >: 7777/apex

    Does anyone have an idea about goes wrong with that?

    Kind regards.

    Hello

    http:// : 7777/apex/listenerConfigure

    This URL does not exist for APEX listener 2.0.1 because the web configuration interface has been removed with 2.0. There was improvements to the command line interface to configure the listener of the APEX and there is a new interface, you can use with SQL Developer since 3.2 (current version 3.2.2 is recommended).

    Always take a glance the documentation that matches the version of software you are using. In your case, it would be the [url http://docs.oracle.com/cd/E37099_01/doc/doc.20/e25066/toc.htm]APEX earphone 2 Installation and Configuration Guide.

    -Udo

  • Error 404 - not found - after the installation of Essbase 11.1.2.2

    Hello

    I encountered error.

    I have a box of PMC 11.1.2.2 using Windows 2008. After the installation of Foundation and configure it, there is no problem at all. I can open workspace and interop as well.
    However, I added Essbase, installation and configuration of it. But after installing Essbase, I managed to turn it back on Hyperion Sharing Service, it did not work.

    The error that says:

    Error 404 - not found
    RFC 2068 Hypertext Transfer Protocol--HTTP / 1.1:
    10.4.5 404 not found
    Server not found anything matching the request URI. No indication is given whether the condition is temporary or permanent.

    If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.


    What I did is also a reconfiguration of shared services, Essbase. But no luck at all.
    Does anyone have any idea, please advise. Thank you.

    Sometimes, this error may be because the data source details are incorrect that I showed you yesterday in WebLogic.
    I don't know how you managed to cause questions to the Foundation after the addition of essbase as I do not have the process that you did.

    If I go to WebLogic and change the user to the EPMSystemRegistry data source and then start the server EMP service the same errors are generated.

    <15-Jun-2012 08:32:58="" o'clock="" bst="">
    ".>

    See you soon

    John
    http://John-Goodwin.blogspot.com/

  • Error 404 - NOT FOUND when you run a form in the form of 11 g

    Hi all

    I had this problem when I run the forms using internet explore.

    I'm working on forms 11g using weblogic 10.3 for the deployment of web forms.

    Error 404 - not found
    RFC 2068 Hypertext Transfer Protocol--HTTP / 1.1:
    10.4.5 404 not found
    Server not found anything matching the request URI. No indication is given whether the condition is temporary or permanent.

    If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.

    Can someone tell me where it went wrong.

    Thank you

    Let's start by clearing up some confusion.

    PORTS
    --------------
    Version 11.1.1.x here are how the common ports are defined by default:

    1 HTTP Server - 8888
    2 WLS_FORMS - 9001
    3 WLS_REPORTS - 9002
    4 WLS Admin Server - 7001

    So, if you understand how ports work in general, you should see that there are two ways to run a form. You can go through the HTTP server or directly call the WLS_FORMS. This means that both of the following might work, although one would be a direct path and the other is route the request through the HTTP server:

  • http://ie1fdtfc5zl1s:9001/forms/frmservlet? config = frmdemo
  • http://ie1fdtfc5zl1s:8888/forms/frmservlet? config = frmdemo

    Port 7001, will always be the port of the default server for the classic domain administrator. By default, the only thing that you can do from here is EM or WLS Console access.

    As for the question of the AMT, by default, the generator and the runtime will wait to find tnsnames.ora in hospitality \config Instance so be sure you add the correct entries to the correct file.

    You can hardcode a path to the file you want to use by setting TNS_ADMIN in default.env (e.g. TNS_ADMIN = C:\Oracle\mytnsdirectory). This will only apply to execution of forms and not the manufacturer.

    Also, here is something that is often a source of confusion for many people... just because you started your form in the constructor does not mean that the form running has nothing to do with the manufacturer at this time. In other words, when you click RunForm button in the constructor all that you do is pass a url in a browser. The browser and the form do not use the constructor parameters except that can be passed in the URL (e.g. name of user and password). Running of all forms are considered to be 'runtime '. This means that all information environment to an active form configuration must be defined in default.env. The manufacturer, on the other hand will be based on the system variable, the Windows registry (or shell if under Unix).

  • OBIEE11g Mobile App Designer with error 404 - not found

    Hi all

    Please visit this link OBIEE11g Mobile App Designer

    Rittman Mead Consulting & amp; raquo; Blog Archive & amp; raquo; A first look at the OBIEE11g Mobile App Designer

    Based on this blog, we applied

    16556157 (OBIEE 11.1.1.7.1 group of hotfixes, which also requires to download another patch, 16569379)

    • 17004920, that enable the Mobile App Designer BI support in the catalog and the presentation service user interface
    • 17220944, the BI Mobile App Designer real application, thanks to the extension of the field of OBIEE WebLogic

    Patches on our server.

    has obtained the option Mobile App in the BI Home page.

    while trying to access the following error is Mobile application

    Error 404 - not found

    Of RFC 2068 Hypertext Transfer Protocol - HTTP/1.1:

    10.4.5 404 not found

    Server not found anything matching the request URI. No indication is given whether the condition is temporary or permanent.

    If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.

    Environment: Windows 2008 (64-bit), OBIEE 11.1.1.7.1

    Please me tips

    Thank you

    Hello

    I was facing the same error after installing the patches for (application Mobile Designer) and restarts as all OBIEE components as well as the server,

    nothing worked except the same error 404 for the last two days.

    so, here the path to get the fixed number advances now.

    1: check the patches applied to the Mobile application designer

    2: follow the blog step by step for the process to be completed.

    Installation Mobile App Designer OLIVIER | OBIEE by Shiva Molabanti

    3: after the patches and the theOBI Mobile App Designer (MAD) deployment manually apply to aid configuration WebLogic the rebound of all services on the OBI (all components)

    4: execution of the Configuration of security as described in the blog. It wil gives error if the console service is not started because it expects for port 7001 WebLogic

    5: after the success of the security configuration reboot all components bi on the side of the OBI and wiat for all future services

    now, I logged in and click on new Mobile app, it worked as expected and it solved the problem.

    Thank you

    BSK

  • Error 404-not found? Although services are upward and the gaze of password security very well.

    Installed Enterprise Edition on the server, error 404-not found? Although services are upward and the gaze of password security very well.

    Thanks in advance,

    What URL are you trying to access?

    for em-->http://localhost:7001 / em

    to get answers-->http://localhost:9704 / Analytics

    Unless you change them.

  • Channel disconnected error with the remote server

    I created the Mobile Flex and PHP project that works very well with a local server (MAMP on Mac). Basically, it reads the data to get MySQL and displays the map Google. Now, I'm moving from a local server to a remote server.

    But when I run my application on emulater, I get the error "channel disconnected - disconnected prior to receipt of the acknowledgement of receipt."

    I Googled what this error is and found a web site that described on this error. According to the web site, the error is probably due to a PHP syntax error and use Network Monitor to debug it.

    However, the problem is that after I activated the network monitor and run my application on the emulator, nothing appears on the monitor network. My first question is if I should use Network Monitor to debug this error of channel disconnectef? The second question is negative, how can I debug this error? Any help would be appreciated.

    I finally understood what I was doing wrong. I followed the insturction of davidflexto http://forums.adobe.com/thread/875709 and didn't I have to set host = 'localhost:8889' in my php that connects to my remote mysql server. It's delicate sicen is remote server, you set host = your domain name, but that's not true. Like davidflex said you need to set host = ' local: 8889 "since your gateway.php is also running on the remote server.

    I fell for several weeks and hope that someone else get stuck like I did it for several weeks.

  • There is no company Manager fusion middleware control installed WebLogic Server 12.1.3 (error 404 (not found))

    Hello.

    We have installed WebLogic Server 12.1.3 on Linux x86_64 file fmw_12.1.3.0.0_wls.jar whithout any errors.

    Then load URL handler company fusion middleware control http:// < Host >: 7001/em we received 404 (not found) error

    There are no links, files and dir with EM on the host in/oracle/middleware.

    According to the documentation, it must be installed and worked after you start WebLogic server.

    Please, please help me understand it y it, or how we can install it.

    I think that you need to install FMW Infrastructure (ADF Runtime)

    You can download it from this URL

    Application Development Framework Downloads

    Install FMW Infrastructure on the same folder of weblogic Middleware and then create a new domain with Enterprise Manager option.

  • Installing vCenter 4.0u2 with the remote server in SQL2008

    I've been running vCenter 4.0 for awhile with SQL Express on the same machine.  I installed SQL Server 2008 on a remote computer, detached and attached the SQL Express database to that server.

    I've implemented the SQL 2008 database with a SQL rather than a domain account authentication account because our domain accounts will expire every 90 days and I have no control over making an exception to this policy.

    I have tried everything point vCenter 4.0 to the new database using the instructions in the knowledge base, but it has always failed.  So I just uninstalled (who also failed and I had to manually get the rest but this is not the point of this post).  When I go to install vCenter 4.0u2 with SYSTEM defined as the user vCenter (again because of limitations of domain account and expire 90 days), it gets all the way up to the

    "

    25003.Setup failed to create the vCenter repository"

    and then breaks down.  It's probably something with the user accounts on SQL authentication and vCenter Server does not, but how can I work around this? If I do a local account on the vCenter server with the same name and password on the vCenter server and run it like this account which will solve the problem?

    Check here also, not exactly the question, but it can help to point you in the right direction.

    http://KB.VMware.com/kb/1017596

  • APEX 5.01 ADR 3.0.1 error 404 not found ordsapex_admin. All the steps done installations, ADR started with SQLDeveloper.

    Newbie, Dan:

    Chrome after http://localhost: 8080/apex/apex_admin "error HTTP 404 problem access/ordsapex_admin. reason: not found".

    Installation steps:

    APEX 5.0.1.00.06

    @apxrtins.sql SYSAUX SYSAUX TEMP/i /;

    @apxchpwd.sql;

    ALTER USER APEX_050000, FLOWS_FILES, APEX_PUBLIC_USER UNLOCK and pass

    EXEC DBMS_XDB. SETHTTPPORT (0);

    Hi adamar,.

    Adamar wrote:

    Chrome after http://localhost: 8080/apex/apex_admin "error HTTP 404 problem access/ordsapex_admin. reason: not found".

    Installation steps:

    APEX 5.0.1.00.06

    @apxrtins.sql SYSAUX SYSAUX TEMP/i /;

    First of all what you have installed 'Runtime Environment' for Oracle APEX 5.0 and 'Runtime Environment' has no GUI as in "Development Environment". 'Runtime environment' has GUI access only for applications deployed in it.

    Reference: https://docs.oracle.com/cd/E59726_01/install.50/e39144/overview.htm#HTMIG366

    You need to convert "Runtime Environment" to "Development Environment".

    Reference: https://docs.oracle.com/cd/E59726_01/install.50/e39144/listener.htm#HTMIG29457

    Are you using the correct installation procedure Oracle APEX and configuration ADR?

    Reference: https://docs.oracle.com/cd/E59726_01/install.50/e39144/listener.htm#HTMIG29143

    Second thing : when you use Oracle REST Data Services like Web listener option, there is no /apex but /ords. So, your connection APEX links will be:

    Third thing : on 404 - when setting up ADR 3.0 have you skipped configuration "PL/SQL gateway '? (This step refers to the configuration of Oracle APEX with ADR (APEX_PUBLIC_USER configuration) which is required for the operation of Oracle APEX with ADR)?

    Otherwise, you will run into the following error message:

    Also open your "ords.3.0.1.177.18.02" folder and run the "readme.html" file in a browser and go to the section "404 errors when Oracle configuration REMAINS Data Services" on the causes of 404.

    Finally , go through the following threads on the Oracle APEX installation and configuration ADR where talked to errors of detail in the course of setting up ADR and the means to solve them:

    Kind regards

    Kiran

  • Any time I try to access the web site GOOGLE, this message 404 not found (nginx)

    Any time I try to access the web site GOOGLE, this message appears.

    Any suggestions as to what is the cause and what is the fix.

    Thank you

    Hi LindaPhillion,

    1. Did you the latest changes on the computer?
    2. What web browser do you use?
    3. Are you having similar issue with any other search engine?

    You will usually receive this error when Internet Explorer is able to connect to the website, but the webpage cannot be found. This error is sometimes caused because the webpage is temporarily unavailable or that the Web page has been removed.

    Get help with the Web site (HTTP error) error messages.

    http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-website-error-messages-HTTP-errors

    Note: Above article also applies to Windows XP.

    Note: Try the step only if you are using the web browser Internet explorer below.

    Refer to the article below and try the steps mentioned, check if it helps.

    How to optimize Internet Explorer

    http://support.Microsoft.com/kb/936213/ro

  • attach the problem. Tablet connection error: driver not found

    I can't connect my tablet which has android v4.2 Jellybean. It shows driver not found. what I can do.

    Original title: attach problem

    Hi Andre,

    Thanks for posting your query in Microsoft Community.

    I imagine the inconvenience that you are experiencing when you plug your tablet with Windows 7 system. I will definitely help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

    1. You did it any significant hardware or change software on the computer before this problem?
    2. What is the exact error message you get, when you say, "Driver not found"?
    3. Connecting the Tablet via a Wi - Fi hotspot connection when you mention, "tethering problem? If this is not the case, how you try to connect the Tablet?
    4. What is the brand and model number. the Tablet?

    The question seems to be resulting in an incompatible or damaged driver that obstructs the connection. First, I suggest you to check if you are able to connect the Tablet via a USB cable.

    In addition, I would suggest trying the following methods and check if the number is reproduced.

    Method 1:

    Run the network troubleshooter to verify connection of the Tablet problems.

    Using the troubleshooter from network in Windows 7

    Also, I suggest you run the hardware and devices Troubleshooter to check for problems with the related drivers that can help connect with the tablet.

    Open the hardware and devices Troubleshooter

    If the problem persists, try the following method.

    Method 2:

    Manually install the Windows 7 compatible driver from the manufacturer's Web site.

    For your reference:

    What to do when a device is not installed correctly

    Hope this information is useful. Let us know if you need more help, we will be happy to help you.

  • When I try to search with Google or Bing I always get 404 not found

    I can't search my PC

    Hi JulietAslakson,

    1. Did you the latest changes on the computer?
    2. What web browser do you use?

    The article below and try the steps mentioned only if you use the browser Internet Explore web, check if it helps.

    How to optimize Internet Explorer

    http://support.Microsoft.com/kb/936213/ro

    You will receive the HTTP 404 error when Internet Explorer is able to connect to the website, but the webpage is not found. This error is sometimes caused because the webpage is temporarily unavailable (in this case, you can try again later) or that the Web page has been removed.

  • M1000 and R 620 blades/VMWare Update Manager

    Small question:

    I need to upgrade my 5.1 to 5.5 ESXi hosts.  I'll use the VMWare Update Manager to perform the upgrade to my hosts, who are servers in a M1000 r.620 chassis.  What I need to download the .iso in VMWare ESXi ESIi specific Dell 5.5 5.5 or can I use disc VMWare 5.5?

    I did not upgrade since the original install and we used the Dell disk at this time here because he had the pilots but thought that with the Update Manager, I wouldn't need to use the specific Dell disk now.

    Thank you.

    You can use.

    Be sure to upgrade your vCenter and Update Manager 5.5 before attempting to upgrade the hosts.

    The image of ESXi 5.5 vanilla of VMware and Dell 'branded' start ESXi 5.5 of the same image.

    However, Dell adds drivers and additional sensors.

    I would recommend going with the image of Dell.

Maybe you are looking for