Podcast connect Question

How to ask for help on a podcast from iTunes, if I presented the show per person interposed as Libsyn - and not iTunes? I need to create an account just for this - or can I use my Apple ID?

I production-edition two shows. We have a missing episode. The other is a not yet post in iTunes, even if it has been almost two weeks. I read on this forum where I can ask a 'refresh '. Question - what I have to have a specific account to ask for this help or my identifier Apple will work for this purpose?

I talked to Libsyn and they say to be patient. I'm just trying to do everything possible, because podcasters themselves are not happy.

Thank you

Rich

https://iTunes.Apple.com/us/podcast/diesel-performance-podcast/id1056758008?MT=2

Tags: iTunes

Similar Questions

  • How can I transfer a podcast of one Apple ID to another Podcast Connect?

    Currently, I run podcast channel for my organization and presented the flow through the old system of Apple in iTunes itself. I did not know that the Apple ID I was connected at the time where that would bind the podcasts in the iTunes Store with (my personal Apple ID). Now, with the advent of the Podcast connect, I noticed that the ID assigned by the work of Apple doesn't have these podcasts available when connected to iTunes Connect. I checked that they are when I intend however to connect to iTunes Connect with my staff.

    Is there a way to 'transfer' of the podcasts to my Apple ID assigned by the work?

    You need support if they can change it for you. Go to https://itunespartner.apple.com/en/podcasts/overview and click on the link "Contact us" at the bottom of the page.

  • Podcast Connect Error: Read timed out

    Hi all

    I am quite new to podcasting and has just published my first episode. Now, I submitted the podcast to itunes and got the "approved podcast" - message from last night. So my podcast is listed on itunes now and works absolutly fine.

    But when I check on it to 'Podcasts Connect' I get an error message "connection to your feed was interrupted because of a connection timeout error. Read timed out ".

    For your understanding: I use a host externally (www.podhost.de), which should be implemented for all data in the RSS feeds from http://headlock.podspot.de/rss.

    When I downloaded the information, everything seemed to go well. Now I'm as stuck in the middle between labor and does not not :-)

    Is just a matter of time, because the cast has gotten only approved? Check the iTunes on the RSS feed on a regular basis and as a result, this error can be temporarily?

    Thanks for your help in advance, it is much appreciated!

    I was able to susbcribe and check it into Podcasts Connect and http://castfeedvalidator.com/ without problems. A time-out would be the cause of your server is slow to respond, but you can just hit a temporary problem that can be anywhere in the internet connection between Apple and your server. As long as it works in iTunes when you subscribe, I shouldn't worry about this. Temporary hiccup in internet connections is very common.

  • VPN connection question

    In my workplace, there are two networks is the local LAN that connect other computers to the internet and the wireless network which my computer connect to and is directly to the internet, my question is that is it possible to connect to the LAN over the internet using the connection V P N if yes how? Please help me because whenever I want to read my emails, I have to put the UTP cable which will be sometimes annoying.
    Please indicate all the measures that are needed to establish the VPN connection.

    Ask it professionals about your place of work.  They know what is possible and what is not.

    Where I work, there is an available VPN that allows connections to the LAN from outside work.  If I use a laptop computer provided by the company, access the LAN just as if I'm at work.  If I use my PC, I get a link that allows me to access a limited number of resources, such as the email of the company.  I can, however, DRC to my desktop at work PC and can get access to the local network.

  • Wire Vs sleep Vs MDS Http connection Question

    Hello

    Here's my situation...

    I created a thread for background based on this article:

    http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800660/How_To _...

    Here is my code:

    / * Thread that runs in the background * /.
    the final private class BackGroundThread extends Thread {}
    private static final int TIMER = 15; minutes
    Private boolean _stop = false;

    public synchronized void stop() {}
    _stop = true;
    }

    Private boolean isCoverageSufficient() {}
    If ((DeviceInfo.isSimulator ()) |)
    (RadioInfo.getState ()! = RadioInfo.STATE_OFF & (RadioInfo.getNetworkService () & RadioInfo.NETWORK_SERVICE_DATA)! = 0) & {CoverageInfo.isCoverageSufficient (CoverageInfo.COVERAGE_MDS))}
    Returns false; a Simulator or a real device with sufficient coverage
    }
    Returns false; real aircraft with insufficient coverage
    }

    public void run() {}
    CoverageInfo.addListener (new CoverageStatusListener() {}
    {} public void coverageStatusChanged (int newCoverage)
    {Switch (newCoverage)}
    box (CoverageInfo.COVERAGE_CARRIER):
    System.out.println ("COVERAGE_CARRIER");
    GPS.this.sendPoints ();
    break;
    box (CoverageInfo.COVERAGE_MDS):
    System.out.println ("COVERAGE_MDS");
    break;
    box (CoverageInfo.COVERAGE_NONE):
    System.out.println ("COVERAGE_NONE");
    break;
    }
    }
    });
               
    While (! _stop) {}
    GPS.this.getPoint (); try to get a GPS point
    Make sure the radio is on and there is the coverage of the data
    If (isCoverageSufficient()) {}
    GPS.this.sendPoints (); Send the _Dans table to the web server
    } else {/ / blackberry is out of coverage}
    GPS.this.storePoints (); store the table _Dans on blackberry
    }

    try {}
    Thread.Sleep(Timer*1000*60); pause the thread for a set number of minutes
    } catch (InterruptedException ie) {}
    System.Err.println ("Error:" + ie.toString ());
    }
    }
    }
    }

    The 'getPoint()' method to get a coordinate GPS using LocationProvider.getLocation ().

    The method 'sendPoints()' send the GPS coordinated to a web server using the HTTP connection:

    ...

    HttpConnection con = (HttpConnection) Connector.open (URL); Open the connection URL
    con.setRequestMethod (HttpConnection.POST); POST method
    con.setRequestProperty ("Content-Type", "application/x-www-formulaires-urlencoded");
    OutputStream out = con.openOutputStream (); display the results in a stream
    out. Write (Data.GetBytes ());
    int responseCode = con.getResponseCode (); Send data and receive the response code
    If (responseCode == HttpConnection.HTTP_OK) {}
    success
    }
    If (con! = null) con. Close; close the connection to the URL

    ...

    The "storePoints()" method simply store the GPS on the Blackberry Persistent Store when the BB is out of coverage.

    When the Blackberry is trying to send a GPS coordinate, but cannot because it is out of coverage, GPS data are stored on the Blackberry. My thread can sleep for 15 minutes before getting another coordinated GPS. If the BB is on the cover in the next interval of 15 minutes, the two coordinates are sent (the current and that (or those) that have been saved on the device).
    It works very well.

    However, now, I would put up a CoverageStatusListener so my GPS coordinates would be sent as soon as the BB is on the cover (and not wait for the next 15 minutes).
    I tried to "COVERAGE_MDS", but he never seems to have triggered... but gets "COVERAGE_CARRIER".
    I have a post on this here: http://supportforums.blackberry.com/rim/board/message?board.id=java_dev&thread.id=6076

    My question is on the wire. Actually here is called the 'sendPoints()' method:
    box (CoverageInfo.COVERAGE_CARRIER):
    System.out.println ("COVERAGE_CARRIER");
    GPS.this.sendPoints ();
    break;

    However, since my son sleeps, this method is not able to initiate a connection HTTP using MDS. I get an error in timeout after 2 minutes.

    I'm not an expert on the threads. I think I have all the necessary parts of the code... but I'm not sure about how to reorganize this.
    Can anyone help?

    Thank you!

    The network connection should be asked by a listener method.  Do not perform any operation or the heavy within a method of transformation of blocking listener.  Instead, you can create a new thread from the method which could then create the network connection to send your data.

  • SQL CONNECTION question

    Hello
    I have the following script:
    CREATE TABLE TEST_CONNECT_BY)
    PK NUMBER NOT NULL,
    key_group number not null,
    START_DATE DATE,
    END_DATE DATE
    );
    insert into TEST_CONNECT_BY values (1, 1, 1 January 2011 ", January 2, 2011");
    insert into TEST_CONNECT_BY values (2, 1, January 2, 2011 ", January 3, 2011");
    insert into TEST_CONNECT_BY values (3, 1, January 3, 2011 ", January 4, 2011");
    insert into TEST_CONNECT_BY values (4, 2, 1 January 2011 ", January 2, 2011");
    insert into TEST_CONNECT_BY values (5, 2, January 2, 2011 ", January 3, 2011");
    insert into TEST_CONNECT_BY values (6, 3, 1 January 2011 ", January 2, 2011");
    insert into TEST_CONNECT_BY values (7, 3, January 3, 2011 ", January 4, 2011");
    commit;

    And seek to get the following result:
    KEY_GROUP START_DATE END_DATE
    --------- ---------- --------
    1 1 JANUARY 2011 JANUARY 4, 2011
    2 1 JANUARY 2011 JANUARY 3, 2011
    3. ON JANUARY 1, 2011 JANUARY 2, 2011
    3 JANUARY 3, 2011 JANUARY 4, 2011

    The connection must be grouped by key_group and connect by end_date to START DATE
    Any help would be appreciated.
    Thank you

    Hello

    arik103 wrote:
    Hello
    I have the following script:
    CREATE TABLE TEST_CONNECT_BY)
    PK NUMBER NOT NULL,
    key_group number not null,
    START_DATE DATE,
    END_DATE DATE
    );
    insert into TEST_CONNECT_BY values (1, 1, 1 January 2011 ", January 2, 2011"); ...

    Thanks for posting this; It is very useful.
    Do not attempt to INSERT a VARCHAR2 (like January 1, 2011 "") in a DATE (such as start_date) field. Even if the above instructions to INSERT work today on your system, there is no guarantee that they will work on the system of someone else, or that they will work on your system in the future. Use TO_DATE or a DATE literal to INSERT a DATE.

    Here's a way to do what you asked:

    SELECT     key_group
    ,     CONNECT_BY_ROOT start_date     AS s_date
    ,     end_date
    FROM     test_connect_by
    WHERE     CONNECT_BY_ISLEAF     = 1
    START WITH     (key_group, start_date) NOT IN
                        (
                      SELECT  key_group
                   ,     end_date
                   FROM     test_connect_by
                   WHERE     end_date     IS NOT NULL     -- If necessary
                  )
    CONNECT BY     key_group     = PRIOR key_group
         AND     start_date     = PRIOR end_date
    ;
    

    Whenever you use a NOT IN subquery, make sure that it never returns NULL values. If end_date is a NOT NULL constraint in your real of the table, then you don't need the WHERE clause of the subquery.

    Whenever you have a question, always say what version of Oracle you are using.
    This is particularly important with CONNECT BY queries, because each version since Oracle 7 has had significant changes in this area.
    The query above requires Oracle 10.1 (or higher).

  • Oracle answers connection question

    Hello

    I have a question to which you may be able to answer for me. The situation is that if I create a new user to the RPD to dev and assign the new user to one group other than the 'administrators' (' say ' AR Manager ") and then try to connect to the Oracle answers with this new username and password, I get this message.

    'Access forbidden '.
    You are not allowed to use Oracle BI answers. »

    If I connect Oracle answers as an administrator and adds the new user to the group 'Presentation Server Administrators' while the new user is able to connect to Oracle answers. If I add this new user to any other group that the group "Presentation server administrators", it can not connect.

    I want to know why "Presentation Server Administrators" is the only group whose members can connect and members of other groups. For security reasons, I want to change that. Can you help me trouble shoot this.

    Thank you

    Hello
    Connection with an administrator and go to manage privileges and check if other groups have access to answers and Dashboards.Also check in manage Interactive dasshboard to see if other groups have access to the dashbaords or not.

    Thank you
    Sandeep

  • Skype cannot connect questions?

    Since the upgrade to the 6.2 Skype, im unable to use Skype,

    After I log in, it seems that he might sign, but this loading screen takes a lot longer then usual, (about 1/2 minutes), then he had to cancel my sign with the comment (!) Skype cannot connect)

    before the update of Skype, it was working fine,

    to try to solve this problem, I did all the following:

    start/stop, given the time just incase it was problem maintence

    uninstalled/reinstalled

    (would of downloaded a previous version, but they abandoned their) so it is a no

    deleted file share.xml

    modified advanced connection options

    all these are done, and not a change in which the "Skype cannot connect" is different

    Help!

    Vista Windows

    Skype 6.2 (does not not as shown above)

    Internet connection very well
    before the last 6.2 versions, only the 6.2 update is the only thing I changed in where im getting this error

    Try to configure Panda:

    http://community.Skype.com/T5/Windows-archive/Skype-can-t-connect-at-click2call/m-p/920654#M92559

  • Bluetooth connection-question

    Hello everyone

    I was wondering what it is and the time I need to download

    * PC Bluetooth Stack Fix Patch 1 *.

    * for Bluetooth stack versions OS windows vista *.

    * 5.00.00 - 5.10.22 *.

    * 6.00.00 - 6.10.09 *.

    I don't know if there is a problem, but I posted my message on another forum by mistake, so here it is again.

    not sure why this is but, when you install a bluetooth adapter and you have a mobile phone as a device listed in the control panel > bluetooth devices.
    and you went through the whole upward from the implementation of the device
    And then you try to connect to or from the computer, it does not connect...

    But it connects instantly if you right click on the device > select control > so that your 'bluetooth operations and parameters.
    And from there I can transfer files to and from the computer.

    But I have trouble, try to connect simply by sending a file from the phone of his self...

    Someone at - it had the same problem and can give me some advice or it's just the way it is...

    (windows vista Home premium)
    (Adapter usb bluetooth 2.1 trust)

    Laptop Toshiba L300-1BV... WINDOWS VISTA

    Post edited by: carl606

    Right mouse click Bluetooth system tray icon, and then select 'About' to see your Bluetooth stack version.
    If you have one that fits in the specified range, then you can install the patch to fix a bug or even better install the latest Bluetooth stack which has all the patches already included.

  • GPS position updated connected question

    Dear,

    I now try to get my current location

    According to instrucations here:

    https://developer.BlackBerry.com/Cascades/documentation/device_platform/location/retrieving.html

    and my post here

    http://supportforums.BlackBerry.com/T5/Cascades-development/GPS-issue/m-p/2483917#M27417

    I've solved the problem and the code works without error,

    But when I call

    bool positionUpdatedConnected = connect(src,
                SIGNAL(positionUpdated(const QGeoPositionInfo &)), this,
                SLOT(positionUpdated(const QGeoPositionInfo &)));
    

    I had

    positionUpdatedConnected  = false
    

    Can someone help me why this result?

    Thank you.

    Hello

    As Zmey pointed out in your other post, you must modify the declaration of your location of positionUpdated() in your GPs.h file. You must rework so that you do not need to specify the QtMobilitySubset namespace (as in your cpp file):

    private Q_SLOTS:
        // This slot is invoked whenever new location information are retrieved
        void positionUpdated(const QGeoPositionInfo &pos);
    

    To do this, put a using statement in your GPs.h file, which unfortunately is not always desirable. You could put

    using namespace QtMobilitySubset;
    

    But if you're worried about having "using" in your header file, you can limit the scope of what you need if you put

    using ::QtMobilitySubset::QGeoPositionInfo;
    

    These changes are necessary due to the nature of the connect() method. In my view, than it does not much more than the chain by comparing the quantities in SIGNAL() and SLOT() macros. The method parameters must match each other and how the methods are declared in their respective headers.

    Jim

  • HTTP connection question

    Hey all,.

    I am an application that will use a web service, so I did a survey on what I need to know about networking.  I read some of the sticky thread: http://supportforums.blackberry.com/t5/Java-Development/Connecting-your-BlackBerry-http-and-socket-c... including watching videos on the transport network as: http://www.blackberry.com/DevMediaLibrary/view.do?name=NetworkingTransports

    After that, I learned I could generate a web service client to the Wireless Toolkit from the Sun help by pointing to the my all and web service WSDL file just "worked."  App BlackBerry connected correctly and pulled back the good info, but nowhere had to do all the connection information that it seemed I'd need in previous discussions.  I like working but am obviously concerned by my understanding of the process.  What happens here?  Can someone point me to some information which will help? Thanks in advance.

    Did this work 'just' on the Simulator, or the device?

    The Simulator (with MDS - CS) emulates a BES device, which requires no setting special conneciotn and 'works '.

    As soon as you leave this environment, you will now face the carrier/network-specific connection problems.

    If you search this forum, you will find 50 pages of messages that go "works on the Simulator, but not device."

    If this * was * a device, then what device, OS level and carrier?

  • SmartView shared connections Question

    Where do you control which Essbase servers appear in the menu users when they choose the option 'Shared connections' and then choose Essbase? For new installations of customer our production and development server is being listed. The user can choose "Delete server" and get rid of it, but I would delete the development server from the original list that they see.

    What is an administrative option that I can control? Our services shared URL points to our production server http://server:19000 workspace / working/SmartViewProviders space. I have examined the APS configuration and workspace options but do not seem to find anything on this. FYI, we are on the latest version of Smartview/APS/Essbase 11.1.2.1.102.

    Thanks for any help on this.

    To remove a shared SmartView connection follow these steps:

    1: connect to the interop url: http://: 19000/interop

    2: expand Group Application-> Foundation-> metadata deployment-> shared-> Essbase Services registry-> and locate APS LWA.

    3: right click on the file 'datasources.xml' and select 'export to Edit.

    4: make a backup of the file.

    5: change the file - remove unwanted under type of Essbase server.

    6: right-click on datasource.xml and select "Import after Edit" and import the file back.

    7: restart the server of analytic provider Services.

    HTH-
    Jasmine.

  • Two guests of virtual machine running in Bridge Mode connection question

    Hello

    I seem to be a little lost with a problem.  What I've read, VMWare Server is free (I plan to use it in a test environment, which is low-budget).  I installed on a server and got two VMGuests of installation at the moment.  The question I have is that I don't see the first guest that I boot on the network at any time? Anyone who encountered this?  that is, if I start the server A and Server B then, Server A is located on the network without problem but can't change anything to or from Server B.  If I stopped server server B still does not work.  If I stop the server B and then start up with the server still does not, it will work on the network.

    At first, I thought that because it's free it will allow only one server at once, but I don't think it's true.  The only other thing I can possibly think, is that I just copied a basic virtual machine Image I created so that both servers are at the same image.  When asked if I had copied from moved it I chose move, this might be the reason, and I need to select copied?

    Anyone got any ideas please?

    Kind regards

    Wayne

    Looking for a line like the following, with a text editor in the file .vmx for each of your virtual machines:

    ethernet0.generatedAddress = "00: 0C: 29:b2:04:03.

    There may be several entries being Ethernet if you have multiple network cards. That's how the MAC address is set and must match what ' ipconfig/all' or 'ifconfig - a' shows you in this prompt.

    MAC addresses are not totally free but you can manually change the lowest few bytes (for example the 03 to 05 in the example above) or a more correct way is to add another NETWORK card and then delete the original, a copy.

    When you reach the point of having the 'model' virtual machines - where you copy the files manually to a new location to create a new virtual machine - and then add the following line to the .vmx to avoid this problem doesn't happen:

    UUID.action = "crΘer".

  • Basic connection question

    One page has two fields for an item # and the other for a provider #. Each has a send button so if the user wants to search for a vendor # it branch at page 2; and if the search by article # it branches on page 4. Something is not empty the cache because the first time, that a search for an item, for example, the button submit to the provider turns the page of the article; and vice versa. I'm sure the cache has to be disposed somewhere, but don't know where. Thanks for your help.

    Okay - this edition after trying something.
    I changed a sequence # on a branches while they are not the same and the effect tells me that the branches are conflicting with each other. Now that the sequence is 10 for one and 20 for each other, one with 10 is that he is stuck.

    Published by: user2961006 on July 7, 2009 12:49

    Hey, no worries. My post count is more than 500, and most of people's questions, in order to continue asking :)

    Let's recap everything: you try to create a form of research with two possible search fields and you want a results screen.
    Here's an idea/question: is it important that research goes to two different screens - or even to another screen at all?
    Here's my idea: structuring your page with a search box and a region of results. Define the condition on the region of results so that it does not appear if there is no value in a lookup field. Define the content of the results area to include the following query:

     where (FIELD1 = NVL(:P15_ITEM,FIELD1)
        and FIELD2 = NVL(:P15_VENDOR,FIELD2))
    

    What this will do, is accept a null value in any search parameter and always return the matching results.

    ---------------

    If the two searches read completely different records from both tables, you can use the following tactics:
    (1) create TWO results areas: one for items and one for suppliers.
    (2) set a condition display on each of them, so that it displays only if its corresponding research field IS NOT NULL.
    3) contained a simple condition WHERE the results to display lines that match the search criteria.

    One of these will make it so you only need one button and an only unconditional branch which redirects to the current page.

  • iTunes connect podcast presentation fails

    OK I'm getting really cheesed off now. I tried to submit a podcast to iTunes for a few days now, with chess repeated due to one or more alleged errors. Yes I have corrected a few errors, but now I think that I have finally fixed all. I can directly subscribe to my iTunes on OSX 10.11.4 12.3.3.17 stream and can see all the summary text, artwork, media files etc. I can successfully subscribe on the podcast standard app on my iPhone 4 with iOS 9.3 s. My stream withdraws to Cast Feed Validator at http://castfeedvalidator.com/?url=http://stpaulsnewport.org.uk/podcast. My stream validates the first level on iTunes Connect and allows me to submit more control. I really don't know what more I can do. My stream used to operate correctly, but then we have changed our URL from pre-production to production, updating all the links and files and no longer works with iTunes Connect but does not work everywhere else. I use the same plugin podcasting (seriously Simple Podcasting 1.14.3) on my Wordpress 4.2.2 site that worked before. I couldn't update the feed URL in iTunes Connect on my site of pre-production (or at least it has no validation) so I asked that it be deleted and started again.

    My biggest complaint:

    1. when the validator Connect iTunes detects an error, please please tell us what the error actually was. I'm not a mind reader, and no one else including iTunes has a problem. I don't want to spend days running after problems and think that I fixed it just to get another email "error."

    Subsidiary of gripes.

    1. update of the email which notifies the error. The http://www.apple.com/itunes/podcasts/techspecs.html link is going nowhere.

    2. update your website so that the page http://www.apple.com/uk/itunes/podcasts/creatorfaq.html with the section "How can I submit my podcast?" is actually correct.

    John

    First of all, you're not talking Apple here. People who have responded here, like me, are not employees of Apple, just users like you who try to use their experience to help. You have highlighted some problems with Apple's Web pages that you can report to Support: go to https://itunespartner.apple.com/en/podcasts/overview and click on the link "Contact us" at the bottom of the page.

    As for your workflow, FeedValidator raises some minor issues, but nothing that should affect the layout. I was able to validate your workflow to Podcasts connect and he didn't show any error and says it is ready for presentation.

    Just to verify that you indeed follow the correct procedure for the presentation of your podcast, the procedure is described here:

    http://Wilmut.UK/submit

    It's just a part of a page that describes the process of making a podcast and includes some Apple Help links at the bottom.

Maybe you are looking for