Poer HP Mini not start the computer button

Similar Questions

• Installation of Vista on the new hard drive was interrupted, and now I can not start the computer

  So I decided that I need a bigger hard drive. I got a 500 GB hard drive, so I have it PLOPPED in my Acer Aspire 5517 with my vista boot drive, turned on and began to go through the process. Once he got to the phase 'installation complete' it seems to take a while, so I let it run all night. Once I got up, it was on a black screen with the mouse, I let stand a few more minutes but still nothing. I turned off and started it expects to find to return at the beginning of the installation, but instead he began to start from what is on the hard drive at this time. It got to the screen with the loading bar and the sign 'Microsoft Corporation'. The loading bar was very frigidity and stopped and started randomly. I let it do this while I went to school, but when I got home, it was always the same loading screen. I rebooted and tried to start in safe mode, but when I do it it stops at crcdisk.sys, and never forwarded charges. I tried to do the reset thing factory start it but that doesn't seem to work. My other puny hard drive still works, but the other does not. I searched the internet but have not seen any other problem like it. I want to just start completely clean of my new 500 GB. Please help!

  Hi James,

  1. What is the number of brand and model of the hard disk of 500 GB?

  2. How did the 500 GB hard drive connected to the computer? It is external or internal?

  To troubleshoot the unable to start the issue to cause corrupted driver, some files that can not be loaded during the startup process must be fixed or restored. So, let's check the disk by using the Windows Recovery Console.

  (a) put the Windows Vista installation disc in the disc drive, and then start the computer.

  (b) press a key when the message "Press any key to boot from CD or DVD ".

  (c) select a language, a time, a currency and a keyboard or another input method, and then click Next.

  (d) click on repair your computer.

  (e) (click on the operating system you want to repair), and then click Next.

  (f) in the System Recovery Options dialog box, click command prompt. Type chkdsk c:/f to try to correct the errors.

  (g) Note: answer them when chkdsk asks you if you want to check the disk next boot Vista

  (h) after the recording of the disc, and then run sfc/scannow to check the corruption of system files.

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Check out TechNet help links and check if that helps:

  The computer starts stops at crcdisk.sys

  Help! Vista won't start... (crcdisk.sys)

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Could not start the computer using the normal error 0x800106ba and 0x80070426

  Original title: Code 10 and error code Window Vista

  Hello

  I'm loading up on safe mode with network.  When I tried to laod normal I get a blank screen and after I sign-in is on Safe Mode.

  I got error 0x800106ba and 0x80070426 messages and I just opened the Device Manager and found this security processor laoader driver code 10.

  Since then, I have installed a constant guard with Comcast meet all what I had problem with my system.  I called tech support and they won't help because they say that I have problems with my Dell Inspiron 530 problems I describe with the PC and not releated to each software.   If anyone can help.  In August 6, 2012, I ran diagnostic memory without any problem what so ever. I have no idea what else to do for these problems, suggestions please let me know.  Thank you

  Elizabeth

  Hi Elizabeth,.

  Follow these methods.

  Method 1: Disconnect all external devices except the keyboard and mouse and try to start the computer in normal mode.

  Method 2: Start your computer in last known good configuration.

  Method 3: As the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 4: Follow the steps in the article.

  What to do if Windows does not start correctly

• Example: HPcompaq mintower7900: can not start the computer

  Hi all

  I need help from anyone who helps, when I try to start my computer by pressing the power button, the first time it starts and all the fun of but only run it for the fun of a few seconds then stops. When I remove the battery, CMOS and RAM for about 5 minutes and then put back them. When I start it starts well. When I try to restart, it restarts fine, but when I turn it on turn off it starts and all the fun of but only run it for a few seconds the amusements stops and nothing is visible on the screen.

  I tried to replace the RAM and CMOS, but it always behaves in the same way. My computer is HP Compaq 7900 Mini-Tower Core 2 duo. I'll be happy if my problem is solved.

  Finally, I found the solution. The problem was the switch, when I changed the switch, the computer was fine to start normally.

• Power switch T30 does not start the computer

  New motherboard installed by Lenovo's Mexico on a guarantee out of T30. Machine will not start. Any ideas where to start (outside the machine back for another long stay of the shipment) would be appreciated. Not my machine. Benefit for a friend.

  ajkula66 wrote:

  You can turn on with one of your A3x keyboards... less than what I remember.

  Good luck.

  Thank you. I stuck an A31 keyboard on it and it turned on! A took a look on the original keyboard. Jumped the bezel around the button cell and found the power button was missing the rubber dome which lies beneath the button. A keyboard A31 cannibalized and it is stuck in the keyboard T30. Major PITA but a few minutes of fumbling had done. Computer works fine.

  I looked inside the frame, but did not find the old piece of rubber. Chalked it up to the mysterious things that happen in transit. The owner swears that the power button was functioning before the swap to the mobo. In any case, thanks for the tip on the keyboard.

• RAM INSTALLED BUT NOT START THE COMPUTER

  MR. PRESIDENT IS RESPECTED,

  I HAVE G6-2312AX HP PAVILION NOTEBOOK COMPUTER. WINDOWS 8 IS INSTALLED IN. 4 GB OF RAM ALREADY THERE. NOW, I WANT TO ADD 4 GB MORE. I BOUGHT 4 GB OF RAM DDR3 1600 MHZ AND TRIED TO INSTALL IT. BUT THE COMPUTER DOES NOT. KINDLY TELL WHAT TO DO. JAI HIND

  It seems that if you did not put in a pair of identical bars or has not used the memry guaranteed compatible modules. You cannot use the module that was already there, unless you add is identical in every respect.

  Use only guarantee modules in identical pairs if you want your upgrade memory to work right the first time.

• Display the icon "2 MIN" when starting the computer

  Is this normal?

  Whenever I turn on my netbook (756-2420) a "2 MIN" appears in the background of the welcome/login screen. Everything works well, but it's boring and I don't know how to get rid of it.

  Could be normal, not sure.

  Your 756 does?

  This netbook is brand new (1 day).

  Thank you

  This is an easy solution, because it is just a wallpaper. Go to C:\Windows\System32\oobe\Info. Rename background file in Backgroundsold or the name you want! Create a new folder named Backgrounds & copy the content of the NOWAIT circles! Restart the PC & all should be well

• Computer Vista will not start, the computer keeps restarting. Also had a BSOD "STOP: 0 x 00000024 (0X8D5389C, 0X8DB535CC, 0X001904AA, 0X8CC143A1)" while trying to use reinstall OS Dell drive

  Original title: corrupted vista OS?

  My Dell studio slim desktop (Vista OS) that I have since Mar09 died on me 2 weeks back and I can't it start and it will keep rebooting until it resembles the wide long beep (as if a deceased person)

  Whenever my com has restarted, it shows the following:

  Safe mode

  Safe mode with networking

  Safe mode with command prompt

  Last known good configuration (Advanced)

  Start Windows normally

  All options will be led to the recovery of my com & return the same screen.

  It will always get stuck at the loading bar where the com starts boot & restarts itself.

  I tried to attach the hard drive to a different com as external hard drive, but it will begin to restart that com & hang the CMO as well

  I tried using the disc to reinstall OS from DELL and it will show a msg of error (blue screen) with the following text:

  Disable or uninstall the antivirus, Defrag disk or backup utilities. Check the configuration of the hard disk & check for any updated drivers.

  Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  STOP: 0 X 00000024 (0X8D5389C, 0X8DB535CC, 0X001904AA, 0X8CC143A1)

  NTFS.sys address 8CC143A1 base at 8CC06000, Datestamp 47918a 96

  Any idea of this situation?

  Is it possible to save my cause com have not all backups from my hard drive?

  Any help would be grateful.

  Thank you

  Hi Bill,

  I forgot to include some info as well... I replaced the 'touched' hardisk (Barracuda 500 GB) to an unused a (Barracuda 160 GB) and the problems disappeared. Whenever I change back the 500 GB in the com, the sound signal occurs only backwards the system continues the reopening for abt... 10 + times?

  "My Office studio slim (Vista OS) Dell I have since Mar09 died on me 2 weeks back and I can't it start, and he'll keep rebooting until it seems a beep long-lasting looks not (as if someone died).

  So the questions are now fixed, unless you put the other disk hard?

  Test the other hard drive.

  Go to the website of your computer manufacturer > find specifications of hardware in your computer (hard drive) > access the Web Hard Drive from the manufacturer site > download their diagnostic software > make a Bootable disc > test your hard drive.

  And run the F12 as I advised you to do so.

  It is DELL's Diagnostics software.

  Good luck with it.

• Unable to start the computer by using the power switch - y480

  Recently, I bought the Ideapad Y480.

  I could not start the computer using the power button. I had to use the oneKey recovery to start the computer and restart the system in the recovery menu to restart the computer.

  What should I do now?

  
  

• cannot start the computer

  Have a Dell 4600 and can not start the computer, white screen Dale may

  "d_may" wrote in message News: * e-mail address is removed from the privacy * .com...

  Have a Dell 4600 and can not start the computer, white screen Dale may

  OK, what happens when you press the power button?  The computer turns on, do you hear the hard drive and fans spin? White screen tells us nothing.  Do you see the Dell screen initially, bios information, of any part of the logo of starting Windows or the process?

• My computer does not start, the alarm tone the aa from the hard drive, then back to the top and is very slow...

  My Pc does not start at times, especially first time in the morning, an alarm tone sounds, then it tries to start, Frost pattern on the screen... or black at all. then after pressing the new button could start up of normal, it will be very slow. Help, please

  Hi WolfgangKlinger,

  ·         Did you do changes on the computer before the show?

  ·         You're able to boot in safe mode?

  ·         You get the error message?

  Follow these methods.

  Method 1: Disconnect all external devices except the keyboard and mouse.

  Method 2: Start your computer in last known good configurations.

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  Applies to:

  • Microsoft Windows XP Home Edition
  • Microsoft Windows XP Professional

  Method 3: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 4: Follow the steps in the article.

  Advanced Troubleshooting for General startup problems in Windows XP

  http://support.Microsoft.com/kb/308041

  For reference:

  How to make a computer faster: 6 ways to speed up your PC

  http://www.Microsoft.com/atwork/maintenance/speed.aspx

• Windows could not update the Configuration to start the computer. Installation cannot continue.

  Trying to move from XP to Vista Ultimate.  During installation, the installation gets to 21% on the files and then closes and I get the error "Windows could not update the configuration to start the computer. Installation cannot continue.  Can someone help me with this?

  the problem has been fixed. I started on the dvd to see if I could install it outside of windows. I discovered that I could just install from windows. When I came out, I came across a repair button.  Who find startup errors and fixed them.  I then rebooted and went into windows and was able to install.

• Error: "Windows could not update the configuration to start the computer. Installation cannot move forward"during the installation of Windows 8 64-bit OEM System Builder on Macbook Pro for help using Boot Camp

  Hello

  I have a brand new Macbook pro and I bought the OEM System Builder of 64-bit Windows 8 driver in a store. My problem is that I have not only not able to install it using Boot Camp. At the end of the installation, a message appears with the following text "Windows could not update the configuration to start the computer. Installation cannot continue.

  I'm not really a tech guy but I also tried to download virtual box and the same error comes back.

  Can someone help me please?

  Thank you!

  Original title: Windows 8 64-bit English OEM System Builder

  The thread is old now, but it is for those who always have this problem.

  When I got the error, I cancelled and restarted the machine. I pressed the 'option' button when starting upwards and he grew the boot partitions. You should see a 'EFI Boot' partition. Choose that and you restart the installation process, but this time it works.

  Supposedly the boot EFI and WinInstall partition should do the same thing. Manually, select one or the other.

• How can I block a program that I have not loading when I start the computer. What is own mac. It comes to start scaning and ask to activate. Is this something authorized by apple. If this is not the case, how can I stop it from loading up.

  Recently whenever I start the computer a program named Mac cleaning charge, stat my scanning system and ask to activate. It looks like a third party program that I should pay. Is it an accredited program for mac. If this is not the case, how can block this load upward.

  Is it called Advanced Mac Cleaner?  If so go here. http://AMC.Kayako.com/Knowledgebase/article/view/4/0/how-to-uninstall-advanced-m ac-cleaner

  It is malware.

  Edit: See post of Linc Davis on this topic for more detailed information.

  Advanced Mac cleanser

• Will not install driver installer of EPSON Scan (L210) - ' error occurred when installing re start the computer, and then try again.

  Original title: problem installing scanner

  EPSON Scan (L210) setup driver moved - "is an error occurred when installing re start the computer, and then try again.

  Hey there, MAHIPALSINGH143

  Welcome to the Microsoft community forums.

  So that the community help to install your printer, we will need more information. Please answer these questions:

  1. Windows what operating system are you running (Windows 10, 8.1, 7)?
  2. The troubleshooting steps have so you far?
  3. Did you upgrade to a new operating system?
     1. If Yes, what operating system you were on before?

  When you look at the error message, it doesn't look like you need to update your drivers. You will need to go on the official website of manufacturers, with your EPSON.

  Here is the site for the EPSON drivers: http://www.epson.co.uk/gb/en/viewcon/corporatesite/support

  When I entered your model of "Epson Scan (L210)" number, it does not recognize the product. Would you be able to check and make sure that you have provided the correct model number? Your model is a new printer?

  Kind regards