point formatting problem

Similar Questions

• Button formatting problem

  I'm having the button formatting problems in the footer of a muse (A Virtual Colorado fly fishing Field Guide) site and wonder if anyone can give some insight into what goes wrong.

  There are two buttons.  The 'Business' button text is formatted as bold Helvetica 14 points.  The 'Links' button is the same formatting, but has also 10 points 'Space before' in order to center the text in the button.  When I go to the home page of the site, Business button shows the text at the top of the key and the links in the Center as planned.  If I navigate to any another page the text of the button Business has been moved to the Center and the text of links to the bottom of the button and the button links has stretched vertically.

  Why would the buttons have this behavior?

  Just rebuilt the button.  Rather than start with a text box, used the State of the widget library button.  That seems to fix the problem.

• HP dm4 after formatting problems

  Hello

  I formatted my laptop (without making a recovery disk) HP dm4-1165dx, operating system windows 7, 64-bit with a cd to install windows 7 I found and now I have 2 problems:

  1. my keyboard "jumps" when I type. I start typing, but then if I only touch the mousepad for a fraction of a second, the mouse pointer will jump somewhere else on the screen and so I tap in the wrong place.

  2. I really like the hp manager and hp with all functions recovery (bar volume green, software of the portable camera, functions of the mouse pad to increase/decrease the size..) and now when I try to download it from the hp website they do not work.

  Is someone can you please tell me how to fix this?

  I tried many solutions recommended in the forum without a bit of luck.

  In addition, I have no problem with reformatting my laptop computer, I just want to work.

  Thank you

  Ella

  Hi Ella,.

  I would like to order a set of replacement recovery disks using the link below and then use them to reinstall your original version of Windows - they will also reinstall all the drivers you need, most of the original software that came with your laptop (the usual exception is Office 2010) and will also recreate the hard disk recovery Partition.  The price varies a bit depending on where in the world you live, but they are generally inexpensive.

  http://support.HP.com/us-en/document/c00810334

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Code formatting problem

  The buggy code formatting or is it just that I can't find the right combination of settings? I hope it's the last and someone here may know how to get it
  
  After setting the parameters, I think I want to get a simple SQL formatted like this.
  

  {noformat}
   select username
  ,sid
  ,serial#
     from v$session
    where sid  = 11
    and(status = 'ACTIVE'
    or status  = 'INACTIVE')
  {noformat}

  Ignore the fact that the actual query is not logical...
  
  The first problem is that the different columns are aligned to the left and lika not indented, I wish they were.
  
  The second (and much smaller) are that the and/or are not indented as keywords. I would get SQL for formatting like this.
  
  

  {noformat}
   select username
         ,sid
         ,serial#
     from v$session
    where sid    = 11
      and(status = 'ACTIVE'
       or status = 'INACTIVE')
  {noformat}

  How can I make the code for formatting of result in the SQL above (in particular the alignment of columns)?

  Hi Mathias,.

  The alignment of the columns is a tab- so, if you set the large tab it almost looks OK - say 4 characters or more. Registered bug: Bug 12605246 - COLUMNS ONLY by TABS IN DO NOT ALIGN WITH the FIRST COLUMN AFTER SELECT

  There is a framework to double dash the AND or OR who could help him with your second point.

  -Turloch
  Team SQLDeveloper

• ECS A - format problem 50 522

  I bought toshiba satellite a 50 522 and xp home came with it pre installed, other day I wanted to format the pc well I had a cd of xp professinal and installed, I thought that he format edition family but not good, now I have 2 xp on my house and professinal pc, I want to format home edition! I studied some info and they said you must make some settings in the Bios... but when I touch clcik DEL pc startup nothing happens... someone can help me how can I do with toshiba laptop?

  Hello

  Well, I put t know what is the problem? If you install the Windows Xp pro, the operating system asks you if you want to format the HARD drive. As far as I know, you get a lot of options. You can format the whole HARD disk or partition only. In addition, you can choose where you want to install the operating system. In my opinion, you need to reinstall Win XP Pro and please check this format options.
  In addition, you can enter the BIOS by pressing ESC.

  Good bye

• NETGEAR D7000 - Mode Access Point - connection problems with iOS Devices

  Hello

  Having a problem with my Netgear D7000 in mode access point.

  My laptop (MacBook Pro) can successfully connect to WiFi and my PC connects fine cable using the D7000 as a switch.

  iOS devices, however, hurt that is to get or maintain a connection - even if they connect to and then some time later they will fall the network. Go to settings shows the client attempts to connect, but seems to be stuck with an assigned random IP (not on the subnet of law), no gateway by default, etc..

  iOS clients are an iPad 3, iPhone 5 & iPhone 5 c. All about the latest version of iOS.

  Other access points by train (Belkin, billion) that's fine.

  DHCP etc. everything is managed by my router which is a constant for all devices and access points - but I tried to change that, and he has not made a difference also.

  D7000 is on the latest firmware (v28), I tried to reset it and setting up from scratch, but no joy.

  Any ideas?

  Change the channel seems to resolved this problem.

• Report Word formatting problems

  Hello

  I have two problems with the format of Word document automatically created in LabVIEW using the palette of report generation (specific Word).

  1.
  There are added additional lines between each section made by Easy Text.vi Word.

  2.
  I want to insert a table without border lines. However when I set borders and shading in a way this table without any boundaries should generated vertical border remain lines between the columns of the table.

  Any help will be greatly appreciated.

  Best regards.

  Martin

  mavlc wrote:

  Hello

  I have two problems with the format of Word document automatically created in LabVIEW using the palette of report generation (specific Word).

  1.
  There are added additional lines between each section made by Easy Text.vi Word.

  2.
  I want to insert a table without border lines. However when I set borders and shading in a way this table without any boundaries should generated vertical border remain lines between the columns of the table.

  Any help will be greatly appreciated.

  Best regards.

  Martin

  2. I want to insert a table without border lines. However when I set borders and shading in a way this table without any boundaries should generated vertical border remain lines between the columns of the table.

  Set the entry AutoFormat in Word Input.vi easy to 0 will create a table without the internal lines, but that doesn't solve your problem #1.

  1. There are added additional lines between each section made by Easy Text.vi Word.

  These additional lines are added by the easy text and the easy Table.vi Word. If you don't want them using these screws. use the report text Append and Append table of the report live as in the following photo. (you then need to set the style using Word Format Text.vi as I did for the title).

  Ben64

  

• 16 GB SanDisk Cruzer Fit format problem

  Hello

  I have a 16 GB Cruzer Fit that I use mainly for mp3 playback on my car front loader. It works well for about a year already in the front loader.

  I was messing around trying to make a live windows bootable flash drive that invovled using "save to usb" shaped applications on the Cruzer. Once I did experiences I wanted to use it as a MP3 flash again for my car player. So I used Windows 7 tool for native format format in FAT32 before you put MP3s on. The mp3s are back on the new format Cruzer 16 GB but the front car charger now won't recognise the player more.

  I think that the problem was caused by the different formatting, tools I've used. Is it possible to get the drive to its original state?

  OK, I got it thanks for the help to work.

  I had a 2nd 16 GB Cruzer made which was already working so I used an app "Disk HARD RAW COPY" to clone the USB drive to work that did not work.

  The application of available freeware here: http://hddguru.com/software/HDD-Raw-Copy-Tool/

  This developer has other cool apps also along these lines.

• Pointer / cursor problems

  My cursor/pointer works fine except that I get the circle of rotation now constantly.  The system is not "hung" but rather just the "arrow", the circle of rotation is here as well.  Need help.

  Hi WRGasior,

  1. have you made changes on the computer recently?
  2 does the problem occur when you open any perticular programs or all programs?

  I suggest you perform the clean boot and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: follow step 7 of section of boot KB929135 to the computer in normal mode.

  More information
  Change the settings of the mouse
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-mouse-settings

  Make the mouse easier to use
  http://Windows.Microsoft.com/en-us/Windows-Vista/make-the-mouse-easier-to-use

• Formatting problems to have a DVD disc. Keep saying I have no disc in the drive when it is clearly there.

  I want to copy pictures on a DVD. The first step is to format the drive. I followed the instructions online and insert a disc in the CD, DVD player and I continue to get a message that tells me to insert a disc when there is already one in there. If I remove the disc and try again, I get the same message.

  Hi Ronald Danilowicz,.

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  3. this happens with a specific disk, or all?

  I suggest you try the fix it from the link given below and check if it helps.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Hope the helps of information.

• HTML formatting problem

  So I will try to create an app pulls an RSS feed of my website and I put the in a label to display in a page but for some reason, sometimes the HTML coding is wobbly and don't format correctly, simply display the code.

  example:

  

  Other times it turns perfectly:

  

  My code is as follows:

  QString TLDRApp::findText(const QVariant item)
  {
      QVariantMap itemData = item.toMap();
      QString description;
              if (itemData.contains("content:encoded")) {
                  description = itemData["content:encoded"].toString();
              }
       return description;
  }
  

  Label {
  
  id:contentLabel
  
  text: " + chosenItem.content + ""
  
  }
  

  What format can I add to make sure that all url links, paragraph breaks, bold / italic letters and make sure size of police through and strip all other formatting that can cause the problem?

  These are the only supported tags, so I was wondering if I could do a remove() and just dwell on everything except for:

  any help will be thanks and marked solutions.

  Thanks in advance, Brandon

  Entire web sites are best displayed using a WebView.

  https://developer.BlackBerry.com/native/reference/Cascades/bb__cascades__webview.html

• InBrowser edition of the formatting problems

  My client has problems to update their daily special page with InBrowser edition.

  This site is hosted by a 3rd party host:

  • Café Central large Storm Lake, Iowa

  We have learned that the only way to keep the formatting that was built in Muse is if the client selects the text to change and the types ABOVE. Are they highlight and delete everything first, formatting disappeared. For some reason, the customer cannot get the hang of it, so I'll have to fix several times a week.

  Is there another way to get around this? Is this a known bug? Is there anything I should do in the game Muse upwards to help?

  Thank you!

  Hello

  Thanks for the attention on this issue. It is a known problem with the team working on editing in the browser (IBE).

  Unfortunately there isn't any alternative workaround at this time apart from the one you highlighted.

  We apologize for the inconvenience.

  Kind regards

  Marc

• A really weird text formatting problem

  I tried to fix a weird text problem in a new InDesign document.

  Behavior: When I hit enter at the end of a line, it gives me a jump page instead of a newline behavior. All the following text is presented on the next page.

  Installation: I have created a group of text boxes (simple script, wall of text, no images), lie on several pages and active the text stream. Then I placed the text via the import command. This is a.doc file and checked, the text it contains is behaving properly. I turned on "View hidden characters" and are all it shows end of paragraphs. Even the place where to get the odd page break, it shows only paragraph. I tried to play with the styles of character, paragraph styles, pipette, formatting of tool... nothing works. This problem appears in several chapter headings in the document, but not all.

  I've been home for hours and have exhausted all the possibilities I could think. Really need help.

  What button?

  OPERATING SYSTEM? Version of InDesign?

  Have you checked the paragraph after the break for an Option keep forcing him to start at a specific location?

• PDF to Word format problems

  When I export a pdf file in Word, the formatting is all messed up. What should I do?

  As mentioned, it depends on the structure of the PDF file. Watching from the point of view that you got the WORD file and now you must take the time to set the format. There is an option in the export options to keep the flow or retain the format. You could try the other option. Don't expect perfection, you probably won't receive it. If you have equations, you can forget that part completely and expect to have to retype it.

• Table format problem - please help

  Here's what I'm trying to do:

  I have a set of documents in xml format according to the docbook standard.  In these documents, there are also types of table.  Standard TABLE with its tag element and an informal table with the tag of the INFORMALTABLE element.

  When they are open and my file format and ESD apply I want Standard tables to have a blue shadow header and informal boards have a shaded gray header.  I created the models of appropriate table.  I can't understand a way via ESD to specify the type of table format that works.  When I open an xml and apply the edd and the format of all tables to open it using the table format that appears first in the list.

  What can I do for ESD to reach my goal?

  Thanks in advance

  Russ,

  Thanks for letting me know my messages were getting through. I just responded to the original rather than through the interfaces forums and had no idea there was a problem. I tried to post twice on this topic today:

  The messages were:

  Russ,

  You are right. A DSP can specify an initial table format. The word "initial" is the key. This is the format that is used when a new table is created, if the new table is created interactively by the user or by opening a SGML or XML document. Initial table layouts do not affect the existing tables. In fact, for a table created in interactive mode, the initial table format determines the format that is highlighted when the Insert Table dialog first. The user is free to choose a different size if you wish.

  and

  Qualar,

  R/w rules are not sensitive to the context, so that if you use an FM tgroup element, they will not be able to help. Tgroup in your EDD definition can define a format of original table of Format if the tgroup is within the item table and Format B if the tgroup lies in informaltable. Just make sure that you have imported ESD in the model before you open the XML document. As you have noticed, if you open the XML document and then import the EDD, the tables already exist and that their format is not affected.

  -Lynne