Point on the display screen
What does the point next to the battery on the display screen?
Its state of the Rhapsody subscription. Full point means a lot of time, until you have to connect to the computer.
1/4 full means only a few days left.
empty circle means securities subscription have expired and will not play until you connect to Rhapsody.
Tags: SanDisk Sansa
What is recommended for the cleaning of the display screen?
You can use Microfiber cleaning chiffonette and can clear the LCD screen of the camera. This will remove dust, dirt and fingerprints on the LCD without scratches or scratches and without the use of harmful chemicals. Don't use solvents or liquid-based cleaners.
NOTE: A cleaning cloth can be purchased at any specialty camera store or order directly from the Web site of Sony parts and accessories sales or by calling (800) 488-7669.
If my post answered your question, please mark it as "acceptable Solution".
How to print photos when the display screen is blank? It shows only a white screen empty when I select the photo and press on print.
You click on a film image in the print module? And, I guess you don't have to go to the Print module, right? Additionally, make sure that you have chosen to make a custom package. If you chose the custom package you need to drag and drop images and organize them.
Im having problems with the display of things like video clips on BBC Web page or other graphics 'on the move '. Fragments of the photo and I can not see and the mouse pointer appears to "scrub" the white area of the ideas of what I can do to fix it please? See you soon
Hello MZ_52,Most likely, you are referring to a Google Chrome installation option that comes in their installation of Adobe Flash Player. This will have no impact on the performance of Flash Player.If it was working fine before the update, I would advise you make a restore system before this happened:
Sometimes when I boot my iMac 11.2 I have a gray screen when I only have my mouse pointer.
If I click where my user picture should be and then type my password I can log in, if I want my power button down for one second until the display sleeps and press a second time to wake up all displays as it should.
It started after the upgrade to yosemite to el capitan, I did an MSC and pram reset as a co-worker suggested and it helped for a little while, but according to apple, I need to update my firmware, so I checked the page on EFI and SMC firmware downloaded iMac (21.5 inch, mid-2010) iMac11 2 IM112.0057.03B (2015-002) and it wouldn't let me install it because it is the mavericks... I currently have Boot ROM Version: IM112.0057.B03.
do I expect that apple updated the page?
I have the same problem with getting the security patch to block a malicious terminal command can not install it because it is intended for an operating system more low version x.
From time to time on a power off boot, I see the same behavior with El Capitan (10.11.2) on an iMac of 17.1%.
Turning the power on and turn it on again it hardens immediately.
How to change the brightness when the blue Fn key don't decrease the screen brightness but don't don't increase the brightness of the screen. How to manually change the brightness of the screen without the keyboard shortcut keys (they do not work)?
Depends on the brand and model of your laptop. Did you install drivers from the manufacturer, or done it with XP (assuming that you do not have XP) pre-installed. For example, on my Gateway laptop, Fn + F8 lights up the screen, and then if I press it again, it fades. Or with keys Fn +
I can brighten it gradually, and Fn + darkens it gradually.
You can figure out or dim the monitor in the video control panel (again, this depends on the manufacturer of card or portable video). Right-click on your desktop and choose Properties. Then go to settings, advanced and then (probably) the video card/chipset that is installed. Somewhere there may be settings to adjust the brightness or gamma of the display. Without knowing your material, I can't say for sure, but it would be the starting point.
-There is no such thing as TMI if you request technical support.
My screen has shadows to the right of all the elements on the screen - how can I fix it? I tried to restart and it has no effect - the shadows remain. The show on all points of the screen - including on the desktop.
Hello1. have you made changes on the computer before this problem?
2. What is the brand and model of your computer?
Try the following and see if it helps.
Troubleshoot monitor and video card: http://windows.microsoft.com/en-us/windows-vista/troubleshoot-monitor-and-video-card-problems
Download and install the latest driver for the display driver.Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly
I suggest you to meet us with the screenshot, so that it will be much easier for us to understand what is the exact as scenario and help you to fix this problem.
Capture the screen: http://windows.microsoft.com/en-US/windows-vista/products/features/snipping-tool
Try this link for help to use SkyDrive to upload collected files and post screen shot/image
This is my first time on this site. The title of the thread might confuse you, so let me clarify: I bought two phones Sony Xperia Z5 from Amazon and to remove the screen protects pre applied, I saw these strange points everywhere in displays (see photo)
Before you ask a third phone Z5, I would like to ask your help to make sure if it of just bad luck or not. In addition, the points cannot be wiped. Unfortunately.
I have no idea of what those who are, because it's actually my first smartphone Sony, so forgive my lack of knowledge, if it is actually a common thing, but the fact remains that I have never seen anything like that before. I admit it's me irritating without common measure, since I always pay close attention to my phones.
On the photo, we see a light that is on the left side, but it's my flashlight so that you guys can see the points more clearly; they are all over the screens and no, they are not defects of pixels, because they can be seen even when phones are out of service.
Welcome to the community,
These points are digitizer, they allow you to be able to use the Enter key. They are on each device touchscreen Xperia, we published. These points are usually seen in some lighting conditions.
I hope this helps.
Hi, can someone please help?
Having used my laptop the other night, I closed it. A few hours later, I opened it again to use it, and although he had not been touched, both lines have one appeared on the screen.
We run about a quarter turn from the left, from top to bottom, and the other completely across the top.
Also, the display keeps excitement up and down, shaking so I can't read it.
Anyone know what this problem could be? And if she needs to be repaired is it covered by the standard warranty?
Also there is no external damage and nothing has been done to the laptop - so I am very confused!
Problem may be defective.
How to tell if the repair is covered by warranty when you didn t wrote what model of laptop you have and how old is it? But if you have the Satellite C it must be fairly new, so it will certainly be covered by the standard warranty.
Check the expiry date of guarantee under the http://www.toshiba-tro.de/unitdetails
I would like to have a LabVIEW screen with a list of test Vi to run, and then select one to display.
In addition, then return to the main screen.
Looks like a project...
Side main VI:
Creata a dropdown list (use ring/enum control) with list of the test screw...
now, create an event "value change" for control... to capture the current value of the control.
use of the VI attached as main VI...
and sub VI
on close event, get the reference of the main VI and use the property node 'open front'... to return to main VI
or you can close VI main when you cal a test Vi and re open the main VI when you close any criterion VI...
screen shows lines very bad horizontally across and make the display very choppy and sloppy.they are very spaced.
1. What is the brand and model of your monitor?
2. you remember make changes to your computer before this problem?
Start the computer in safe mode and see if the problem occurs. Follow the steps from the link to start in safe mode: http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode
Try opening the display troubleshooter: Open the display quality problems http://windows.microsoft.com/en-US/windows7/Open-the-Display-Quality-troubleshooter
Try also to update the display drivers: http://windows.microsoft.com/en-US/windows7/Automatically-get-recommended-drivers-and-updates-for-your-hardware
He started without notice, but is now a nusance. The dust particles are piling up under the screen at the top and in the center of the screen. It is no longer visible when the display shows a background darker and in full sun. Is it possible to clean it?
Had the same problem with my first storm. Unfortunately, there is no way to get the dust off can compressed air, vacuum, etc. And once it starts it doesn't stop as if by magic. I suggest take it to your business and get a replacement/new device. Some people have tried to burst the screen goes to find that they crack then their carrier does not replace because they broke up it. Save yourself the headache and just bring it back. At your made in the Canada? Mine was and I read on several other forums that there were problems of productions with Canadian manufactured devices. You can tell by popping the battery. It says it on a sticker under there. My replacement was made in the Mexico... no problem with this one.
See you soon,.
How can I change the display size to one I am comfortable with that? The options are too large or too small.
Before you download the latest Firefox, my character at the top of the display showed at least 1/2 on firefox. Now, is that the ears. How can I show more of her? Stupid question, I know, but it's bugging me.
I think you need to show toolbars as you can so that your character can have more space so it can be displayed more.
How to show or hide various toolbars?
Check and tell if its working.
I lost the ability to see the volume control on the display on my R60.
I'd appreciate advice on how to restore this function.
Hi and welcome to the forum!
Did you uninstall something that could have caused this? Reinstall the hotkey features, it could solve this problem.
Keep us in the loop.
Maybe you are looking for
When I opened the site 'http://www.indeed.ca/lan-jobs-in-brampton' fields 'what' and 'where' are filled automatically with "lan" and "brampton" see attached. I've removed the cookies for the site, set the privacy settings of Firefox 41.02 to keep coo
The chip CPU & models M30X display may be set to level and what?Thanks, Pete
Hello 2 questions on this laptop, I can't find the info on the data sheet. How many slots does RAM have? Maximum RAM supported? Thank you
Hi after loading windows 10 having problem p.j. doc and pitcure to email keep coming to the internet does not, but the internet is ok wilth all else Thanks JIm
Hello When using LabVIEW FPGA and implement a strict typedef on the Panel before the FPGA, this causes issues with the FPGA generated in the PC Code reference. I have attached a picture. In the code of my PC, I generate the ref FPGA, then use it. In