Points update

Work done on the server today?  Based on the emails I received, I should be 29 points in front of where I am currently, but for now, the site has not changed that.  I know that sometimes when there is work he can do everything behind (not just that), so I was curious.

Lag? If that was the only problem I've had in the last three days, it would not so hurt. I don't see points being updated is back to nd yesterday it was reported in the living room as well. Many problems funky in CSA these days here. I get the Proxy 502 errors, offset of the experience, to get the message we will Be Back, the error bars red content... A lot of good things.

Tags: Using Support Communities

Similar Questions

  • points update chart xy

    Hello

    I am creating a VI that shows a circle being generated in real-time of the face before of the VI. I use a loop to generate values then pass the values to a block of cluster, then a graphic block. I have attached a VI for you to see where I am. When I run the VI while loop runs continuously and does not have information about the cluster. In the loop, the loop runs until it hits the number of meter and then transmits data to the cluser block on his way to the graphic block.

    I'm doing the VI spend a data point outside the while loop and loop on each iteration for the chart. Can someone show me how to do this please?

    Thank you very much

    James

    You can't get the data out of the loop until the loop ends (or unless you do something fancy unnecessarily). Programming LabVIEW is based entirely on the data flow and parallelism. It is incredibly powerful and has led to its success over the years (coupled with graphical programming), but is usually one of the first things the new developers stumble on. This is a simple resource to familiarize themselves with its functioning. The function to highlight execution is a great way to watch how your application uses data streams.

    If you want to update the graphics are coming data, then you must move the graphical indicator terminal inside the loop. You can do so by completing one iteration to iteration that stored tables using shift registers.

  • Preferences of Photoshop reset after point updates

    After each update point, some of the Photoshop preferences to reset (color of the interface is the most visible). This also happens with updates of Illustrator and InDesign point. Does anyone else have this problem? Any solution?

    Run OS x with the latest OS updates and creative cloud Mountain Lion.

    We just released an update (14.1.1) that addresses this issue.  For more information about the update, please visit: http://blogs.adobe.com/crawlspace/2013/09/photoshop-cc-14-1-1-update-now-available.html

    Thank you

    Adam

  • Help! Toggle point update-measure the Apex 5 tabular

    Hi all the guru.

    I previously put in place this in apex 4.0 but now we migrated to 5.0.2 apex and it's functionality does not work (at the console errors)

    implementation of high level hollow walk

    a. I have a tabular report, all columns are read-only, except for one which is update-able.

    b the value of condition/State in the other column this editable column will be enable or disabled

    c. dynamic action on the charge to function so that call the following javascript function.

    disableItems('f12', 'Y', 'f04')
    

    <script language="JavaScript" type="text/javascript">
    function disableItems(checkcolumn, columnvalue, disablecolumn)
    {
     var f1 = document.getElementsByName(checkcolumn);
     var f2 = document.getElementsByName(disablecolumn);
     var k;
     if (f1)
     {
      for (k = 0; k < f1.length; k++)
      {
       if (f1[k].value !== "")
        {
        f2[k].disabled = true;
        f2[k].style.backgroundColor = 'silver'; 
        }
      }
     }    
    }
    
    
    function enableItems(column)
    {
     var x = document.getElementsByName(column);
     var k;
     if (x)
     {
      for (k = 0; k < x.length; k++)
      {
        x[k].disabled= false;
       x[k].style.backgroundColor = 'white';
      }
     }
    }
    </script>
    
    
    
    
    <meta content="30" http-equiv="refresh"> 
    
    

    PS: I have activate WHAT JS legacy support under themes.

    Error I get on console is less than

    Uncaught Condition must be function or Boolean literaldisableItems 
    @ legacy.min.js?v=5.0.2.00.07:1apex.da.gEventList.actionList.javascriptFunction 
    @ f?p=104:132:5120642144112::::::361da.doAction 
    @ desktop.min.js?v=5.0.2.00.07:17da.doActions 
    @ desktop.min.js?v=5.0.2.00.07:17(anonymous function) 
    @ desktop.min.js?v=5.0.2.00.07:17n.extend.each 
    @ jquery-2.1.3.min.js?v=5.0.2.00.07:2n.fn.n.each 
    @ jquery-2.1.3.min.js?v=5.0.2.00.07:2da.actions 
    @ desktop.min.js?v=5.0.2.00.07:17(anonymous function) 
    @ desktop.min.js?v=5.0.2.00.07:17n.extend.each 
    @ jquery-2.1.3.min.js?v=5.0.2.00.07:2n.fn.n.each 
    @ jquery-2.1.3.min.js?v=5.0.2.00.07:2da.init 
    @ desktop.min.js?v=5.0.2.00.07:17(anonymous function) 
    @ f?p=104:132:5120642144112::::::400(anonymous function) 
    @ f?p=104:132:5120642144112::::::400j 
    @ jquery-2.1.3.min.js?v=5.0.2.00.07:2k.fireWith 
    @ jquery-2.1.3.min.js?v=5.0.2.00.07:2n.extend.ready 
    @ jquery-2.1.3.min.js?v=5.0.2.00.07:2I 
    @ jquery-2.1.3.min.js?v=5.0.2.00.07:2
    

    Kindly help me with this problem.

    Thanks for your time and input in advance.

    I want to disable the COMM column if the WORK = CLERK

    I did the following,

    In the Classes of CCS in the WORK column, I put: job

    Then, I created a DA:

    IDENTIFICATION

    Name: IS_CLERK

    WHEN

    event: change

    selection type: jQuery Selector

    JQuery selector: .job

    Condition: equal to

    Value: "CLERK"

    REAL ACTIONS

    Action: Execute the JavaScript Code

    fires when the result of the event is: true

    Code: disableItems('f03','Y','f07')

    It does not work. What's wrong?

  • Point update screen only

    Hello

    An element with ' display in the form of "is"show only "will not be updated (thanks to a process after submit). But it will be updated when it is displayed as "text field.

    How is it?

    Best regards, Robbert

    Hello
    If you have not specified it seems that you are on Apex4.
    By defaul display settings do not state record. If you want to display item but the value to be set then change the element and by virtue of the definition to save stae session = YES.

    It comes to the expected behavior of display items as they have a default does not state.

    Kind regards

  • Missing system restore points

    Take a look at my system restore points, I found that it was not. There is no reason I know for it - system restore has been on, but being created no restore points - I turned it off and then new and now that it will create restore again points.

    Something happened to me I was had been looking at some dodgy sites "make money on the web easily" just out of curiosity. Anyone know of any malicious dishes that destroys the restore points. It would be a sneaky way to stop the removal of spyware.

    Also I noticed some automatic update of Microsoft had just completed installation - would this have deleted restore points? From what I read the auto create restore points updates not remove them.

    Any ideas anyone?

    Hello

    I found this info:

    If there is no free disk space on the monitored system drive or on any of the available non-system drives, System Restore purges restore systematically points in all monitored partitions to free disk space. If the free disk space falls below 50 MB on any monitored partition, System Restore will stop watch and suspend.
    Note: Some users have reported that using the Real Player One has been deleted and restore points. Please check your log to the system event viewer for events to restore the system to a volume error event.

    But these are questions of Microsoft and if you want to learn more about these issues with the tool to restore the system you must check this information from Microsoft site:
    http://www.Microsoft.com/technet/prodtechnol/winxppro/plan/faqsrwxp.mspx

    You will find frequently asked Questions (FAQ) about the system restore in Windows XP.

  • Windows update - Live Essentials 2011

    I am running Windows 7 Pro 64-bit. Today, I received a notification that 1 one update is available for Windows Live essential 2011. I had already installed previous version for about a year... Direct Mail, Photo Gallery, Live Writer.  I advanced and installed the update and before you install it, it asked if I wanted to install all of the programs, or just the updates for the programs that I had already installed... I chose the latter.  After installation, I checked in my Start menu and realized that I had a critical Live program to choose from, Live Writer.  So, apparently, that the update did NOT only update that I had installed, he deleted some. Now, when I'm in Internet explorer 8 and click on the mail button, it tries to start Office Outlook.

    I tried the system restore, selecting that point update, but restoring is not... so I tried a second (earlier today) restore, which have no point.  Thank God I checked my AppData folder and can see Live e-mail and e-mail records intact.  Is it possible to cancel the update of windows (since the restoration doesn't seem to work) or do I need to download the following essential full windows live and install it over the update failed, re - set from the beginning?

    Thanks in advance...

    Fallstar

    EDIT: Please ignore this post... I think the update only deleted the item from Start Menu, since I was able to successfully launches Live Mail via a different/shortcut icon that I had... and it was the version update of mail.   Moderators can delete this thread. :)

    You will find the support for applications Windows Live Essentials here: http://windowslivehelp.com/

    PS: The Support for Windows Live Writer (as well as all Windows Live Essentials 2009 applications) will end very soon.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Vista will not start after update 09/12/2009.

    After you install the updates available for me on December 9, 2009, Windows Update wanted the computer to restart to complete the installation. I made and went on my merry way. A while later, I rebooted the computer, but the screen resolution was twisted, is no longer big screen, had compressed air and had a strange grid points, and after the progress bar Windows Vista, the screen remains black - the Welcome screen never showed up.

    Kick system repair CD, found 'a fix will prevent' and system restore suggested. Subsequently, attempted to start Vista, but got the same result as before. Tried the CD to repair a few times more and always suggested the same thing, leading me to believe it was not actually the application of the system restore.

    Vista is able to boot in safe mode and safe mode with networking and attempted a restoration of the system from there to just before the patch, the night before (a prior restore point updates 12/8) and a point 12/5. In all cases restarted to complete the restoration and then rebooted to see if it worked - never did. Whenever I went to the system restore, it doesn't seem like it had restored any point...

    Attempted to launch Windows Update in safe mode, but nothing happened. Went to the windows update website to see if I could get the ActiveX update, but he comes to propose I have run Windows Update from my computer (nice), with no 'help' link or other way to declare that it did not work.

    Went into Add/Remove programs to see if there was an installable patch listed, but it does not list something beyond mid-November.

    Help. =[

    Run the System File Checker (the command is SFC/scannow) from the command prompt.  Also check that your system has all virus\malware.  Here is a link to a thread with some good information: get rid of malware

    You can also run a disk error check as well.    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows XP Pro system trashes updated November 11, 2009

    Windows XP Pro SP3. Card video BFG GeForce 8600 GT (Nvidia chipset)

    Nov 11/09 updates downloaded and installed; the re-boot, loaded into the Windows desktop, but showed many errors that some DLL files could not load (presumably all startup programs that load of the system, such as Maximizer and McAfee AV status bar). On a second restart, same thing. Tried system restore to a previous control point (updates have been uploaded today, Nov 12). The re-booting, BSOD - messages past too quickly to read and auto rebooted system.

    Now can not even start in safe mode command line.

    Followed by: see known issues of http://support.microsoft.com/kb/969947 (revised 12 Nov-09) ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Update of security for Microsoft Office PowerPoint 2007 (KB2596764)

    I attempt in install the following update:

    Security for Microsoft Office PowerPoint 2007 (KB2596764) and even installed Microsoft Fix it and I keep getting an error message that the update was not installed.

    Currently, I use Kaspersky Internet security 2011 and have not had any problems any other installation updates Microsoft.

    See that related posts from my colleague Susan Bradley in this thread (especially if Quickbooks is installed) => http://answers.microsoft.com/en-us/office/forum/office_2007-powerpoint/power-point-update-kb2596764-wont-install-on/9f75a583-4a2d-4c43-acd1-ee68c72f732a

  • CS6 updates could not be applied - Application Manager may be damaged

    Hello

    If I try to search for updates in After Effects with the menu point "updates... "I get the error"Update failed"since the Application Manager. See screenshot:

    AdobeApplicationManagerUpdateFailed.jpg

    If I click on the first link I get an html 404 error ' sorry this page is not available! "* GREAT *.

    the second links to the Customer Support page?

    http://helpx.Adobe.com/Creative-Suite.html

    not very useful...

    If I try to start the Application Manager manually by executing this file

    C:\Program Files (x 86) \Common Files\Adobe\OOBE\PDApp\core\PDapp.exe

    the Application Manager downloads an update (for the Manager himself), but the update process fails. See screenshot

    AdobeApplicationManagerInstallationFailed.jpg

    All this happened suddenly and completely unexpectedly and I haven't changed anything on my computer. Updates in the past have already worked well.

    This happens with all applications of the Creative Suites (CS5, CS5.5, CS6) and I'm not able to get updates for applications.

    I'm a bit lost now any help is very appreciated!

    _____________________________________________________

    System: Windows7 Ultimate 64 bit (Updated) (German language)

    CPU: Intel Core 2 Extreme Q9300

    RAM: 16 GB

    Graphics card: nVidia Quadro FX 2700 M

    Adobe Production Premium CS5 | CS5.5 | CS6

    Abhijit Hey,.

    because you had not replied to my last post I went my own way to fix!

    I did your steps

    Rename the folder OOBE OOBE.old starting from these locations

    C:\Users\(your username) \AppData\Local\Adobe

    C:\Program Files (x 86) \Common Files\Adobe

    but instead of download Creative cloud of creative.adobe.com I installed AdobeApplicationManager.exe of temp folder!

    It turned out that my temp folder AdobeApplicationManager.exe was the same installer as the creative cloud!

    Well, first I was a little afraid that I now have creative cloud installed on my system, but I think creative cloud is the new name or the version of the Application Manager?

    I also want to account for other users having the same problem that the menu/help/update... features in the CS Applications work again as expected!

    One question remains:

    Could safely delete the renamed folder OOBE.old of these places without any harm to my system?

    C:\Users\(your username) \AppData\Local\Adobe

    C:\Program Files (x 86) \Common Files\Adobe

    Thank you very much for your help Abhijit

    Kind regards

    Felix

    _____________________

    www.felixdames.de

  • Toshiba Satellite HDDrecovery boot

    Hello everyone;

    I have a Toshiba L750 that hangs before logon on the Windows logo.

    I THINK that the last thing done on this subject was apparently Windows updates. The laptop is on; I left the room and he must have restarted and was stuck on the logo.
    The last restore point on the restoration of the system is: - 18/1/2014 19:00 - Windows updates. So I think that it is during the restart process of this it came down. It was working fine before this.

    Initially (before I saw the last restore point) I thought it might be a hard drive damaged, but it loads fine in safe mode, all recognized and there; and I tested from the hard drive in my office and it is working well, I can access all my files.
    With the HARD drive in the laptop starting up, repair does not detect a problem.
    System Restore shows that last point updates of Windows and 3 others:

    01/18/2014 18:46 installed TightVNC
    19/01/2014 17:06 installed SDFormatter
    01/18/2014 11:44 installed Itunes

    It is said that the restore was successful. but will continue to hang on the windows logo,

    I first thought that I installed some nasty software come with a download but I'm sure that now that it's not. I ran Webroot & Avast AV on the disk hard when he was in my office. Avast found nothing and Webroot found 6 minor threats that have been supported. I think it was something in the updates of Windows who disliked my Windows maybe.

    About 6 months ago, I have (ignoring the re - install HDDrecovery) installed a new version of Windows using the CD that came with my desktop computer. Windows installed fine and I had no problems so far.
    As I re-installed with a new version of windows I have more recovery option in Windows System Recovery Options. I don't have that:

    Startup Repair
    System restore
    System Image recovery
    Windows memory diagnostic
    Command prompt

    Now I want to reinstall and can't figure out how to leave the HDDrecovery.

    I copy the folder HDDrecovery off the computer laptop and an external hard drive. I do this with HDDrecovery and all drivers when I get a new device...
    So I try to boot from the USB external hard drive, but it does not work.
    I copied the folder HDDrecovery on the partition of the drive (d) into the laptop but can't seem to do a lot with it. I can't understand how to start mode without failure (where everything works), he is of the files and folders in the folder HDDrecovery, but none of them start HDDrecovery. Nor, I understand how to change the order of boot disks and that it can boot from the partition that contains the folder HDDrecovery on it.

    Here, any help would be greatly appreciated.

    Thank you

    If anyone can give any advice it would be fantastic.

    Post edited by: change

    Post edited by: change

    Hello

    How it works with HARD drive recovery, you can read on http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm

    This will not work if your laptop still have original recovery of images stored on HARD drive and laptop and you didn t change the structure of the partitions of HARD drive. After the installation of clean operating system you not longer access to recovery files.
    Impossible to move files from external device recovery and begin the installation of recovery here.
    > And I can understand how to change the order of boot disks and that it can boot from the partition that contains the folder HDDrecovery on it.
    You cannot start in safe data recovery. It works with the factory settings only when you install Recovery Toshiba as indicated in the document option.

    By the way: check it please http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=75084

  • Splash screen, blurred or distorted after the PRAM reset

    Hello

    I had several problems lately with my MBP 15 inch 2011. Install the new OS X versions and updates point makes three beeps and reboot several times in quick succession. Those point updates will then appear as installed six times in the list of the updates installed the app from the App Store.

    Thinking this could be an issue that could be fixed with a STROLLER reset. I realized and noticed that the after reset the PRAM, the splash screen is blurred. Attached photo:

    Even once more my AMD GPU degrades?

    Thanks in advance.

    5 beeps indicates a RAM problem.

    You may experience a kernel panic.  Check through these instructions and post when it exists:

    https://support.Apple.com/en-us/HT201753

    Run Apple Hardware Test:

    https://support.Apple.com/en-us/HT201257

    Note that an error free AHT is inconclusive.

    Be aware of this program;

    https://www.Apple.com/support/MacBookPro-videoissues/

    Cioao.

  • How to uninstall software distribution service 3.0

    HOW TO UNINSTALL software distribution service 3.0

    Why would you do that?

    You use Microsoft Security Essentials?

    If you see Restore Points in your system restore calendar who say:

    Software Distribution Service 3.0

    Restore Points see you who belong to the Distribution of software Service (SDS) and are created when Windows Update detects something to do.

    Windows Update will download the updates in the folder c:\windows\SoftwareDistribution and once the download is complete, and at the start of the installation of updates (automatically or stop or manually - depending on your configuration) a new SDS Restore Point is automatically created before updates are installed.  After that the SDS Restore Point is created, then the updates are installed.  It works this way so you can still use a Restore Point to go back to a previous time before the updates were installed.

    The updates could be the usual things like updates to security updates of the operating system XP, patch, or if you are running Microsoft Security Essentials (MSE) and it will update its definitions, you will see a restore SDS everytime MSE Point updates (because it is considered as an update from MS).

    If you run MSE, you see a Restore Point of your configuration / SDS each day or more a day depending on suite how often updates come out.   The appearance of these SDS Restore Points can be worrying if you don't know what they mean, but you can always find what it means if one needs to solve a problem.

    If you run MSE, expect to see the restoration of the SDS shows up every day or so and that, usually just means that your MSE got an update (not a problem).

    Now do you really want to uninstall your SDS 3.0?

  • "Snow pixels' tall occurring during the game Medieval 2, Guild Wars. Usually a system crash or subsequently block

    System details: a core i7 920 w / 6gig of memory running with vista 64 home premium and an ati 4850 video card.

    I had just updated to service pack 2 when I began to experience great green snow pixels while playing games.  Once held, the games sometimes recovered, but usually locked.  A few times I had the BSOD, it mentions the atikmdag.sys file.  When running in SafeMode after an accident, there are large graphic pink vertical lines running through the screen, but I can read through them.

    I tried to fix things:

    -Restoration of the system, no useful because the sp2 update seems to erase the old restore points
    -updated to latest video drivers
    -Uninstall and reinstall the video drivers,
    -Uninstall and reinstall the games
    -uninstall service pack 2

    None seemed to work permenantly.

    No matter what suggestions would be greatly appreciated...

    Thank you

    cluelessincali,
    It seems that the video card software is causing problems.  The file you mentioned causing the BSOD 'atikmdag.sys' is part of the ATI software.  You can use The Windows Installer Cleanup utility and remove all the ATI from your system software.  Can I start with just install the driver and not the other ATI software and see if that helps.  You can also clean boot your system to ensure that no other software is causing a problem.    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • Display Pdf in Firfox with plugin Adobe does not always work

    Hello I use Firefox 21 and it is up to date. My OS is Windows 7 and it is up to date. When I try a few links to pdf files, I can see them in Firefox using the Adobe plug-in. Other links to pdf files will make firefox ask me if I want to open it using

  • Download iLife 06?

    Hello I have a PowerBook G4, running 10.4.11.  I tried to install iLife 08 on that, but iMovie requires an Intel processor.  This link is dead: http://www.apple.com/support/downloads/imovieHD6.html. Where can I find a free download of it, or cached a

  • Laptop HP Compaq 6730 b: driver search

    Hello I bought my wife a new PC for Christmas. My Compaq needs help, however, his 6730 b is newer than mine and has a few other design and mine features HW does not have bluetooth, fingerprint and Wireless N vs G sensor. I formatted and installed ATU

  • Can Windows Defender updates - I save the updates to a flash drive to install on another computer?

    Windows Defender updates can be downloaded on a flashdrive on another computer and then transferred to another computer?  I still have remote access and it took 5.5 hours to download the most recent, then it would not install.  I am running Windows X

  • Windows mail sends no message and said and was error if I try to delete

    My Windows mail client, version 6, stopped sending messages that remain in the Outbox.  If I try to delete the message, it indicates an error has occurred and suggest that to consult the community.  Any ideas?