points with color on a scatterGraph diffenrent

Similar Questions

• Office Jet 6600: How to print black with color ink run out?

  How can I print black with color ink are empty? (I have gone to properties... black and white only... and allow black ink only a few times, but I get the options for onlinr purchases, cancel printing or help.)

  When I click on it help States I can print with the depleted cartridges, but it doesn't tell me how. Can someone please?

  Hello

  For your printer, it is only possible to print only in black when the other cartridges are exhausted.

  If you want to know more about it please check the document below

  http://support.HP.com/us-en/product/HP-OfficeJet-6600-e-all-in-one-printer---H711a/H711g/4322968/model/4323587/document/c04331666

  Thank you

  I am an employee of HP, these messages are consistent with my knowledge and HP is not responsible.
  By clicking on the star of congratulations in the post helped you to say thanks.
  Please indicate the position that solved your problem as accepted Solution

  I work for HP

• What it means when you see one point with an Ark on it by putting in your password for your email and your bank account.

  When I try to access my bank account and email, at the end of the bar where the password typed in there is a point with a bow. It looks like an eye. I've never seen this before and it makes me uncomfortable and seem as thought that someone may have hacked my computer in order to get the passwords. What does that mean?

  Hi Christine,

  The point with a bow that resembles an eye to reveal the password you enter. It is used to avoid typing the wrong password and clicking the eye symbol, you can correct it if it is typed incorrectly.

  1. what operating system is installed on your computer?

  2. what email you speak?

  3. who is your provider of mail service?

  4. what web browser do you use on your computer?

  What version of the operating system Windows am I running? :

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Please provide us with more information on the specific question to help you to fix as soon as possible.

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• MS Paint "fill with color" tool does not work. :(

  In the painting, my "fill with color" tool (the pouring paint can) does not work. I click on the box, I click on a different color, the icon changes to the can, but when I click on a space as say an empty circle, it doesn't do anything. Right click, nothing, left click, nothing.

  I noticed that the only thing he is able to do is to change a solid color that I did (as a solid black rectangle) in a different color, but only once. If I rectangle black color green, I can't change it to any other color after. I don't know what is happening.

  I am not edit a photo or anything btw, I start a new painting from scratch file. I'm trying just to circles of color and enclosed spaces. I've done this dozens of times with no problems. I tried restarting the computer and paint without effect.

  Thanks for any help!

  In the painting, my "fill with color" tool (the pouring paint can) does not work. I click on the box, I click on a different color, the icon changes to the can, but when I click on a space as say an empty circle, it doesn't do anything. Right click, nothing, left click, nothing.

  I noticed that the only thing he is able to do is to change a solid color that I did (as a solid black rectangle) in a different color, but only once. If I rectangle black color green, I can't change it to any other color after. I don't know what is happening.

  I am not edit a photo or anything btw, I start a new painting from scratch file. I'm trying just to circles of color and enclosed spaces. I've done this dozens of times with no problems. I tried restarting the computer and paint without effect.

  Thanks for any help!

  Hé salés

  try to run the sfc/scannow command. to repair the corrupted system files

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Walter, the time zone traveller

• Implementation of access point with WRT54GL

  Hi all

  I am very new to this wireless networking thing.

  I'm having some trouble with my wireless router.  My ISP gave me a wireless Huwaei modem but I live in a two-story apartment and modem from the ISP plays well on the second floor, the signal is very weak.

  My problem here is that I am trying to use my router to broadcast the signal to the floor.

  Is it possible to set up an access point with my Wi - Fi router?

  My idea is that the router would be placed in another part of the apartment and clone the signal from the modem wi - fi and move this signal. I want to place the wireless router in the second floor.

  Such an action is possible?

  Thank you very much for your help.

  You can set the WRT54GL as Access Point, both your two routers must be wired to the other...

  To make the two routers are wireless, is not not possible.

  For both routers works between them, connect the Ethernet cable between the LAN Port of your Modem to the Lan 1 Port on the Linksys router. Click here and follow the instructions how do your Linksys router works with your Modem.

• Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."

  Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."  How can this be repaired?

  Hi rebick,.

  Try the troubleshooting steps presented by spirit X in this thread.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• PROBLEM of ALIGNMENT with color printing

  PROBLEM of ALIGNMENT with color printing.  HP Officejet Pro L7680 all-in-One - using Mac OS x 10.6.8 - with USB connection & ethernet - without error message thank you.

  Hello

  What kind of problem?  Print quality problems?  You have run the alignment of the HP utility?

• Draw the circle with color gradient

  Hi all

  Someone knows how to use graphics to draw a circle with color gradient?

  Thanks for help

  Here is a very simple code that should work.

  //xc = x center
  //yc = y center
  //
  //  Circle diagram
  //           (xc-r),(yc-r){col2}  xc,(yc-r){col3) (xc+r),(yc-r){col4}
  //           (xc-r), yc   {col1}  [xc, yc]        (xc+r),yc    {col5}
  //           (xc-r),(yc+r){col8}  xc,(yc+r){col7} (xc+r),(yc+r){col6} 
  
  int [] xpts = { (xc-r), (xc-r), xc, (xc+r), (xc+r), (xc+r), xc, (xc-r) };
  int [] ypts = { yc, (yc-r), (yc-r), (yc-r), yc, (yc+r), (yc+r), (yc+r) };
  byte [] types = { Graphics.CURVEDPATH_END_POINT,
                    Graphics.CURVEDPATH_QUADRATIC_BEZIER_CONTROL_POINT,
                    Graphics.CURVEDPATH_END_POINT,
                    Graphics.CURVEDPATH_QUADRATIC_BEZIER_CONTROL_POINT,
                    Graphics.CURVEDPATH_END_POINT,
                    Graphics.CURVEDPATH_QUADRATIC_BEZIER_CONTROL_POINT,
                    Graphics.CURVEDPATH_END_POINT,
                    Graphics.CURVEDPATH_QUADRATIC_BEZIER_CONTROL_POINT };
  int [] colors = { col1, col2, col3, col4, col5, col6, col7, col8 };
  
  graphics.drawShadedPath(xpts,ypts,types,colors,null);
  

• With the help of new access points with old WLC 4100; LWAPP layer 2 switching 3-tier

  Hi all

  We currently use two solutions Wiresless LAN - a 10 AP1230 access points-based autonomous (5 years) and a solution based on a Cisco WLC 4100 (4112, running 3.2) with 12 AP1010 LWAPP access points.

  First thing, we are considering to replace the stand-alone solution with the WLC one. However, I'm not sure if we can use the new access points such as the LAP1041N or the LAP1252G with our current 4100 WLC. Access reported data sheets 'Cisco Unified Wireless Network Software Release 7.0 or later version' 'software '. Does this mean that these access points can only be used with controllers running 7.0 or later?

  If we are unable to use the new access points with our current WLC and need to buy a new controller: can we use access points AP1010 current with a new WLC as the Cisco 4402?

  Second thing, it is that we want to expand the networks configured on the WLC 4100 to another site that is connected via VPN wireless. Wireless Setup guide indicates that the LWAPP mode can be changed from Layer 2 to 3 layers so that the access points can be configured with an IP address, which allows you to place access points basically anywhere as long as IP connectivity exists between the AP and the WLC.

  Y does it as described in a document with the change of mode LWAPP layer 2 to 3 layers? Or ist just the following steps (if I understand correctly):

  -Change the Mode of Transport LWAPP on the controller of layer 2 to 3 layers

  -Creation of a PA-manager interface with an IP address in the same subnet as the management interface (tried that, without changing LWAPP mode transport first and not was not possible - error)

  With regard to different sites:

  -Configure option DHCP 43 with the IP address of the WLC or DNS with CISCO-LWAPP - CONTROLLER.localdomain

  -Make sure that the interface ap - manager can reach points on the different site

  Is it really just as simple as that? All information about it is very appreciated!

  / edit: I would also like to know if the 1260 series access point are backward compatible with 802. 11B. Whereas it is stated in 1040 and 1250 for example series data sheets, it is not particularly mentioned in 1260 data sheet.

  Thank you

  Michael

  Well, let's start with the simple question/answer

  With regard to different sites:

  -Configure option DHCP 43 with the IP address of the WLC or DNS with CISCO-LWAPP - CONTROLLER.localdomain

  -Make sure that the interface ap - manager can reach points on the different site

  Yes, it's as simple as that.

  As for other issues, looks like you would be better served with a forklift upgrade.  New controllers and new AP.

  Now, the AP 1230/1240/1250. all work on the 4.2, 1140 code starts with 5.2 and 1040/3500/1260 are 7.0

  The AP 1000 series is not supported after 4.2 code.

  Refer to here for the complete list of the AP and taken codes supported:

  http://www.Cisco.com/en/us/docs/wireless/controller/release/notes/crn7.0.html#wp610751

  From what I see, the 4100 is not supported after the train of 3.2.

  So, it really depends on what you are trying to accomplish with the upgrade.  If you are looking for a 80.211n support, you really want to be 5.2 or better, we had some problems with MRR + 40 Mhz channels, 4.2, 5 GHz band only.

• Problem with colored labels

  Hello

  I'm having some problems with color tags when you use lightroom;

  I recently upgraded to Lightroom from 5.6 to 6.5, and all the photos of my catalog with tags color turns white label only.

  I also have the same problem when I import pictures from my laptop catalog, whith photo colors such as red, blue, green, turns in a white label...

  Is there a problem with LR 6.5?

  Could you help me please?

  Cosette

  I finally found the solution.

  During the upgrade, LR languages have changed, and the words associated with the colors too, labels

  so I translate just the name of the color in the metadata / color label set / change, and everything is fine!

• Change all the names of Swatch "Name with color value"?

  Y at - it a Javascript command change the nuances in a document to the "Name with color value" box in the Swatch Options? I know there are scripts to change the names of swatch based on the value of the color, but I'm looking for a script that applies this specific to all checkbox.

  Thanks in advance!

  This should do it:

  (function(){
    var doc=app.activeDocument,
    sw=doc.swatches.everyItem().getElements(),
    c;
    for(var i=3; i			 
  NEW WIDGET! Navigation in both sense between the anchor points with "prev" and "next" buttons http://goo.GL/TMbZRc
  		   

• When I open a new file I can't paint with colors. All the colors I chose change o a shade of gray

  When I open a file empty, that I can't paint with colors as whenever I chose a color happens as gray. Why is this?

  Verify that the new file is in RGB mode: menu/image/mode.

• Don't fill with color frame?

  I have an image that has a black fill to 70% compared to the nuances... but it does not show on the framework itself.

  The setting is a compound path, but even when I release it it don't fill it again with colors.

  I have the joint here. http://www.sendspace.com/Pro/DL/6zbtne

  Thank you, Tim

  The filling of the frame is set to 0% opacity in the effect controls panel.

• problem with color efex pro 3 in CS5...

  Hi all

  Sorry for my English

  I have a problem with Color Efex Pro 3, I can not

  If it is usable on my CS5 how do?

  I installed the software in the Photoshop plug-in

  CS5 and nothing

  Help me I am knocked out I finds no solution...

  Thank you all in advance for help you

  We do not control the API - but the code of the plugin runs in our process.

  Plugins are not other applications, they are DLLs with reminders in Photoshop, sharing space with Photoshop.

  If we cannot witn against their bugs with the current plugin architecture.

  If you didn't mind working two orders of magnitude slower with no plugins do not access to as many features of Photoshop, we could put plugins in another process.   Then, of course there are things that we can do - just nothing reasonable, or that visitors and developers would be conditioned with.

  And next time, please do not hesitate to ask questions instead of trying to make a Chair coding.