Political diagnostic services doesn't work not, error 5

Similar Questions

• Defender doesn't work not, error 0x800106ba code rises and turns off fire wall

  Defender works not code 0x800106ba and fire wall hanging by its essential free installed window on every 5 min when im on the line the wall of fire will turn off then I have to turn it back on it will say several eares with scerity

  * original title - defender works do not code 0x800106ba rises and wall of fire turns off on me responsible continues to do the same essential Windows *.

  If you have Microsoft Security Essentials, AVG, McAfee, Norton, etc. installed, they have a conflict with Windows Defender, or turn it off.

  Microsoft Security Essentials has its own integrated version of the defender and it automatically disables the version of Vista in Windows Defender.

  If it's not:

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

  Turn Windows Defender on or off the information on the link above of Microsoft.

  Hope the above explains the common compatibility issues with Windows Defender and other security programs.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Microsoft Security Essentials questions should be directed to the MSE Forums:

  http://social.answers.Microsoft.com/forums/en-us/msestart/threads

  Installation and upgrade of Microsoft Security Essentials program Forum at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Update doesn't work not, error 0x824400A

  Original title: cannot use windows update!

  have tried us windows update to update an old Inspiron with windows xp family and I get the 0x824400A error message and I can't find any information on this! can someone please?  Also it is running windows service Pack 2 and I can't update the window 3.  Thank you

  Hello

  Remember to make changes to the computer before this problem?

  Follow these methods

  Method 1: Run the Microsoft fixit for the link.

  http://support.Microsoft.com/mats/windows_update/

  Method 2: You can also run a scan for viruses with Microsoft Safety scanner to make sure that the computer is free of viral infections.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 3:   Reset Windows Update components and check.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Note: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  
  Method 4: if the methods above do not help, I suggest you delete the edb.log file and check if that helps.
  Follow these steps:

  a. click the Start button, click computer.

  b. now, go to this site: C:\windows\softwaredistribution\datastore\logs\edb.log

  c. delete the log file, and then restart the computer and check the issue.

  Finally, you can install XP Service Pack 3.
  How to get Windows XP Service Pack 3 (SP3)
  http://support.Microsoft.com/kb/322389

• Windows Installer doesn't work not, error "Installer could not access" in Vista

  GET THE ERROR WITH RESPECT TO WINDOWS VISTA "INSTALLER IS NOT BE ACCESSIBLE.  I DON'T TRUST ANY OTHER WEB FIXED EXCEPT DIRECTLY FROM MICROSOFT?  YOU HAVE A LINK FOR THE DRIVER OF FIXING? MICROSOFT SHOULD HAVE IT ON AUTOMATIC UPDATES NOW!  THERE IS AN EPIDEMIC OF WHAT I SEE.

  MY WINDOWS INSTALLER DOES NOT WORK "INSTALLER IS NOT BE ACCESSIBLE. I DON'T TRUST ANY OTHER WEB FIXED EXCEPT DIRECTLY FROM MICROSOFT? YOU HAVE A LINK FOR THE DRIVER OF FIXING?

  Oztroll,

  Also, please see the post below with a similar problem and fix possible:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/b7d55d78-FBED-436a-AFF4-81b46ca3b06a

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows update doesn't work not, error code 8024A 000 - check forbut say never installed?

  Windows 8 States - error code 8024A 000, I never checked, when to check all the time. Also indicates the installed updates ever?  Am only computing base & do as it says, but does not work. It is a routine control, never had this problem, I don't get it, HELP

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-error-0x8024a000

  If you receive the Windows Update 0x8024a000 or 8024a 000 error when you use Windows Update, there is an automatic convenience store comes with Windows that might be able to solve this problem for you.

  To open the Windows Update troubleshooting tool

  • Open the Windows Update troubleshooting tool by hitting swipe in the edge right of the screen, tap Find (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), entering the troubleshooting in the search box, touching or clicking on settings and then by typing or clicking on the resolution of the problems. Under system and security, tap or click Fix problems with Windows Update.

• ID CS3 - default scripts doesn't work not, error

  Try using scripts by default 'LabelGraphics.jsx' & 'CropMarks.jsx '.

  Have also tried to use the applescript equality in the menu scripts.

  In all cases, nothing happens. No message, no script activity seen.

  Some other scripts such as "AddGuides.jsx" work very well.

  Copied scripts to work from another machine and get the same result.

  What prevents these scripts to work and any ideas on how to fix it?

  InDesign CS 3

  OS X 10.5.6

  Thank you

  They do nothing, or to display a message and * then * do nothing?

  The two scripts you mention you need to have something selected.

  Labelgraphics in you requires to have a selected (imported) image; It displays a dialog box requesting that call them to add, and then do so.

  Cropmarks requires you have any selection. It then displays a dialog box, asking what kind of brands, it must attract where around your selection.

  As the two scripts display a warning clear when you have nothing selected, I guess an another script removes all the dialog boxes and does not restore this setting. (It is a usual thing to remove own ID warnings and confirmations, but it is considered polite to restore the settings later.)

  Copy the following line into an empty text file and record under the name "restoreDialogs.jsx" in the scripts folder. You can find the right folder to save in law (or frame) by clicking on the folder of the user in the script palette and selecting 'reveal in Finder/Explorer. Run the script for reposting of the dialog box and test the scripts again.

  app.scriptPreferences.userInteractionLevel = UserInteractionLevels.INTERACT_WITH_ALL;

• WiFi doesn't work not, error message "no connection available.

  Hello everyone.

  I have a Lenovo G580. Until last night my wireless worked perfectly. However, the last night and without changing what whatsoever, the wifi icon that showed * which means that it has detected a network, but when I want to press it, it seems that there are no available connections. Although I can connect to the internet via cable, wifi is like I turned it off, only I did not. My laptop uses the qualcomm ar9485wb-eg network adapter atheros. I downloaded some drivers for the Atheros website, but they do not seem to change anything. Does anyone have any suggestions?

  Thank you very much

  Dina

  Hello

  I suggest you try the procedure described in the article and see if it helps.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows/fix-network-adapter-problems#1TC=Windows-8

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Service Windows Installer does not (Error code: 8004FF01)

  original title: Windows Installer Service does not

  Error code: 8004FF01 will not download. Said the service windows install can be altered.

  Try these steps and check if you are able to install Windows updates.

  Method 1: reset the Windows Update components.

  http://go.Microsoft.com/?linkid=9665683>

  This tool automates the most common fixes problems with the Windows Update site. Note this fix it Solution has two modes by default and aggressive. You must run the fix it solution in default mode and determine if it solves your problem with Windows Update before running it in aggressive mode.

  Method 2: check the condition of Windows Installer and installer of Modules of Windows.

  I. click on start and type Services.msc and press ENTER.

  II. Locate the Windows Installer Service.

  III. double click it to check if the service is started or not.

  IV. change the startup type to automatic and start the service.

  V. check the same thing for Windows Installer of Module service.

  VI. Press ok and close the Services window.

  UTC/GMT is 16:42 Wednesday, may 2, 2012

• My Apple iPhone 5 touchscreen doesn't work not when the call comes. This problem is only in locked mode and mode unlocked when the call come it works normally. The problem is only locked Iphone and a just coming guard time. give soltn

  Hello can anyone give solution to my problem.

  my iPhone touch 5 works not when it is in locked mode and it's time all incoming call came the touch works do not. other times, the touch works normally wat is the problem. ?

  If you disturb not activated. Settings > do not disturb.

• Impossible to get all the e-mails at work... worked yesterday... doesn't work not today

  can go on msn... click on hotmail... will go to the site to connect but will not download the hotmail page... also my homepage to another location of e-mail... same thing let me identify you but do not download the site/page...worked yesterday... November 7... but don't work not today...

  Hi Schuylerwoods,

  Since you are facing problems with your Hotmail account, you can publish your application in the Windows Live forum to get help:

  Windows Live Support

• Msinfo32.exe system information doesn't work no-error can not recueillir collect information, says WMI is problem, but is running

  Running windows 7. WMI is running in the services. Msinfo32.exe does not work

  in the program information system, on the right side in the box grey

  said

  Cannot collect Information

  Unable to access Windows Management Instrumentation software. Management of Windows files may be displaced or missing.

  I looked at other posts, tried patches, watched registry edit info and nothing seems to work

  Why you give up your other post here:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/unable-to-access-Msinfo32-error-message-cant/56060474-BDDA-4094-92EC-52ab8211a713

  You need to maybe just reset the Windows Management Instrumentation (WMI) repository.

  In the box type cmd and click on the Start orb button / open a window as administrator command prompt:

  

  At the command prompt window, type the following commands one at a time by pressing ENTER after each:

  net stop winmgmt (stop the WMI Service)

  Answer Yes to the warning message about the stop of the:

  Security Center

  IP Helper

  Then in the box enter these commands one at a time:

  /resetrepository of winmgmt (he will tell you that the WMI repository has been reset)

  net start winmgmt (it can report the WMI Service is started - which is correct)

  exit (close the command prompt window)

  See how msinfo32 works now.

  Note that this could take a long time (several to several minutes) for the msinfo32 command complete repository of Windows is set to zero and MOF is compiled:

  

  If that's what you see, wait patiently to fill information.

  Then don't forget to restart your system so that other important Services get restarted and check again msinfo32.

• Windows 7 - various & probably related errors / order & Search box doesn't work not + Media Player media information is not displayed

  For the last two weeks, I had problems with my user. I suspect that these are permission-related because the problems occur with my user and not the other user on my PC. Curiously however, my user is ADMINISTRATOR permissions so I do not understand why I can do less than the other user. I had the following problems:

  (1) if I go to the search box and try to enter a search string, then first the letters I type do not appear in the box but no research takes place
  (2) if I insert a CD and the Media Player is launched, I see no data media. The CD names and titles do not appear. If I use the other user on the PC there is no problem in this information that is retrieved.
  I hope someone can help.
  Thank you!

  Before do you anything else - create two additional password Admin users & create disks to reset password for each of them.

  Your symptoms are compatible with corruption on the user profile, and you don't want to get stuck without any functioning Admin accounts.

• Windows 10 install doesn't work not after reboot (works fine until the PC is rebooted).

  It's bad enough. Upgrade to windows 10. Wanted to ensure that I started with a clean slate, so I have uninstalled FireFox, and then use the new edge of Windows browser to download the latest version of FireFox.

  He moved very well, remembers my bookmarks and settings, etc. Everything seems fine.

  But after a system restart, the FireFox icon on the desktop and the taskbar are just blank page icon, and when you try to run the program it says it cannot be found, or that I don't have permission to run it.

  Let's not get too hung up on how the bad error message is (go, Windows, who is?), the problem is that a program that worked very well until I rebooted now is not found or all of a sudden, I don't have permission to run it?

  The problem is if I try to boot from the desktop shortcut or if I go directly into C:\Program Files (x 86) \Mozilla Firefox and double-click on Firefox.exe.

  I tried the things:

  1. check the properties of the installer to download stub (Firefox Setup Stub 40.0.3.exe). I noticed that it was reported as a program that had been downloaded on the Internet and could be 'blocked '. So I checked the 'Unlock' button Did an uninstall, and then run Setup again. Everything is fine. Restart - same problem.

  2. check the properties of the installer to download stub (Firefox Setup Stub 40.0.3.exe). I noticed that there are two weird entries 'unknown user' in the settings of security with a sort of GUID. I removed those two. Did an uninstall, and then run Setup again. Everything is fine. Restart - same problem.

  3. do you have an uninstall, and then run the installer as administrator (after making the above changes). Everything is fine. Restart - same problem.

  I'm out of ideas.

  A diagnosis by a Microsoft technician during a support chat session!

  If you want to do a clean install of FireFox on your Windows machine after upgrading to Windows 10, but you had FireFox installed on Windows 7 or Windows 8 before the upgrade, you must uninstall the TWO FireFox and install the service of Maintenance of Mozilla before performing cleaning.

  If you uninstall FireFox but not the service of Maintenance of Mozilla, you will get the squirrels I described, where FireFox stops working after a reboot or a disconnection / connection.

  I think this is related to the BS that Microsoft introduced with Windows 10 where, after installing FIreFox, if you click on the button that says that you want FireFox to be your default browser is not only to persist this setting directly. Need you to the configuration screen of Windows 10 for default programs, which is not at all intuitive, especially those based on past behavior.

  I think that FireFox should put an explanatory text (on the page where you click on the button to make FireFox the default browser) which explains what Microsoft is up to.

  plan to install FireFox on Windows 10 machine

• The problem with Windows update - automatic updates service won't start not (error 126)

  original title: the problem with Windows update

  Please help me to get Windows Update operational return.

  XP Media Center Edition, Version 2002, SP3

  Had a problem with "Generic host process for Win32 has encountered a problem and needs to close."  Follow-up of the instructions on this link:
  http://support.Microsoft.com/kb/931852

  Seems to have cleared the error message.  So far so good.

  However, now a Windows Update does not work.  Security Center Windows were told to go to control panel > system and use the Automatic Updates tab.  But, if I go to control panel > system, the Automatic Updates tab does not appear.

  I also went to the control panel > Services.  Tried to start the automatic updates service.  Received this error message: could not start the service automatic updates on Local computer.  Error 126: The specified module could not be found

  I already followed several instructions on this subject:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cannot-access-Windows-automatic-update-after/aeaec175-01f4-47ed-8F97-55b854af4220

  In the thread above, I was following the post on 30 August.  According to Option A, I completed step 5 for the uninstallation of McAfee Security.  At this time, my network card has stopped working.  On the recommendation of the officer, I posted to the Malwarebytes forum.  The officer determined Malwarebytes that I don't have a malicious software.  I ended up posting on forum McAfee to get my network card works again.  Then I reinstalled McAfee and start to run Windows Update.

  I started with Option A, step 8 to reset Internet Explorer using http://support.microsoft.com/kb/923737.  The difficulty it has worked very well.

  Then Option A, step 9 says reset Windows Update using http://support.microsoft.com/kb/971058.  When I ran the difficulty in default or aggressive mode, I got an error message saying: he cannot start wuauserv.  The message asks me to verify that the user has privileges to take this step.  Well, I checked through user accounts who am the only one user set up on this PC and I have administrator privileges.  Help me please run this difficulty or recommend another way to get Windows Update works again.

  [1]... looks like you are saying that my system is so wet that a clean install is the (only?) way to go.

  [2] if I do a clean install, not only what I need to reinstall Windows and all my applications, I also have to reinstall the drivers... Etc. ?

  [3] I think I have the disks supplied with the PC system. Is it better to use than to use the recovery partitiion?

  [4A]... is there a possibility that some of [my data are] infected?

  [4] preventing me from simply infect the whole PC again?

  A1. Yes, and it was my recommendation in August, too.

  A2. Yes.

  A3. Only not really well using the restore Partition hidden to make the "destructive recovery" will include all drivers, etc., that have been installed at the factory.

  A4a. Yes, a real possibility.

  A4b. You run at least three 3 tests on the backup data before restoring one (1) with your installed & updated up-to-date anti-virus application (for example, Microsoft Security Essentials) and two 2 with good reputation, free online scans (e.g., ESET;) Bit Defender; Kaspersky; HouseCall; (F - Secure).

  If you have saved your data on CD/DVD, the disc scanner. If you have backed up your data to a flash drive, SD card, or another external drive AND KB971029 is installed, analyze the drive.

  If you have any questions or need additional help, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Once again, good luck!

• How to defeat Google play Services taken in charge not error after conversion (reconditioning) apk for bar

  Hi guys,.

  Recently I converted (reconditioned) our app Android to Blackberry App (apk-> bar) using their recommended tool. The conversion was done successfully with Code signing. But after installing the bar, resulting in the camera, it shows Google play Services not supported error. I understand that Google play Services is Android specific operating system and not be supported directly by BB. But our needs of the application needs of Google Services play to run background location API services.

  After a little research had found an option to patch the APK file and remove game services coupled into that and then convert the striped apk / patched in bar file. Anyone can throw some light on this? Since I was looking for the apk to convert with the basic functionality (location Services) in the BB. Can it be replaced by similar location services, or something similar without changing the code? If Yes please let me know.

  Thanks in advance.

  Nice, one of the few to actually get an answer here.

  The only way to solve the problem, is to go into the source code of the application.  Find and delete all references to the Google Services play and/or include the services of alternatives (in rare cases, an alternative is available).  Keeping in mind, what specific BlackBerry will be * only * works on BlackBerry - so get ready to manage a separate version and the branch for your application goes forward.

  In any case, after however many hours it forces you to rewrite all the code sections that are facilitated by the Services of Google - play you can then try and repackage and submit your application on BlackBerry.  Moreover, assuming that you take someone elses APK and reconditioning without permission - which represents about 75% of the APK for BAR conversions in BlackBerry World today - the only solution is something like that.

  When you do that, you will have the privilege of working with the BlackBerry test team - who will probably reject your application a few dozen times for some reason, they may make up ("I've had them rejecting applications because a URL Pointant to http://appworld.blackberry.com ' has not used the name recommended for BlackBerry World - as Hello, it's not my URL to change).  But I digress from the topic, hope that helps.