Pomp A60-106: how to print wireless using HP Photosmart C4380

Similar Questions

• How to print wireless from my Iphone?

  I bought a new HP Officejet 6500 has more and he says I can print wireless from my iphone. Yet, I must find a way to do it. I find available wireless networks, but how the hell do I print from the phone to the printer?

  Hello

  Please use it to check and fix:

  http://www.Apple.com/support/iPhone/Assistant/AirPrint/

  Kind regards.

• Canon MP620 "forget" how to print wireless until I have reinstall completely

  I had my Canon MP620 for about five years. I use it to print wireless from my laptop. It worked fine all the time that I got it. Recently, I tried to print from my laptop and I got a message that the printer is offline and cannot connect (Yes, the printer was on). I tried all sorts of things and the only way to print by plugging in the printer to the laptop via USB. I kept trying to print wireless and finally the only thing that worked was completely uninstall the printer drivers, reset the network settings on the printer and the definition of completely back up everything again from scratch.

  Yes, problem solved. However, two days (and a few prints) later, I had the same problem. Would not print print wireless, while it is plugged. And once again, after all sorts of fiddling, the only solution that worked was AM I described the first time. Well, it works again. But a few days later, the same problem! It was this morning. However, this time still connect the printer via the USB port did not work! Once again I have had to reinstall and reconfigure everything from scratch. Now it works again (for now...)

  Then, as the title suggests, I think that my printer is 'forget' printing wireless after a few days of regular use. Any suggestions on fixing this? Or do I just get a new printer? Thank you.

  Hi MattL2,

  Your PIXMA MP620 shouldn't forget its wireless settings.  It is recommended that you contact the direct technical assistance. There is NO charge for this call. Information in real-time to a technical assistance call live would be very beneficial in this case.

  Please call 1-866-261-9362, Monday - Friday 10:00-10: 00 ET (excluding holidays). A Canon technical support representative will be able to solve this problem more quickly.

• How to print wireless in a network home

  I use a two year Vista old and hard desktop PC connected to a wireless cable router.  My wife has a new laptop running Windows 7 using a wireless connection to the router cable.  Our range of printers HP all-in-one is connected via USB to the desktop.  My wife wants to be able to print wireless from the same printer.

  I was researching the requirments to upgrade desktop for Windows 7 and test requirments.  I noticed that Windows 7 has a capacity of home network.  If I improve domestic desktop for Windows 7, we will be able to form a network or do I add hardware for the Office to connect with his laptop.  I don't know that my old pc has not built based on router what to do most recent.

  Thanks for the help.

  You can form a network with Vista too. However, you must use on the computers on the network job option rather the HomeGroup.

  In any case, upgrade to Windows 7 is nice and would facilitate networking.

  You should be fine with your current hardware.

  Jack, MVP - networking.

• HP Officejet 6000 printest test page, but do not print anything else. How to print wireless?

  I reinstalled the printer.  It printed the page test perfectly, now I will not print anything else.  How to print again?

  Hello

  Welcome to the Windows 7 community!

  From your problem description, I understand that you can not print from HP Officejet 6000. I take this opportunity to help you.

  Let us perform the following troubleshooting methods and check that it helps to resolve the issue.

  Method 1: Run the printer Troubleshooter
  first of all, make sure that your printer is turned on and connected to your Windows computer according to the manufacturer's instructions. Then, try the printer troubleshooter, which will attempt to diagnose and solve your problem automatically.
  For more information, see the article below:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2: Restart the Print Spooler Service
  You must be logged on as administrator to perform these steps.
  a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.
  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. right-click on the print spooler service and then click Properties.
  d. on the general tab, next to startup type, make sure that automatic is selected.
  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Method 3: Configure the driver to correct the printer port
  on the tab "Ports" of the "Printer properties" window, select the port for the printer driver.
  a. from the Windows desktop, open the printer properties window.
  b. click the Ports tab.
  c. under "printing on the following ports; Select the port to which your printer is connected.
  Example: In this example, the printer is connected to the "USB001 virtual printer Port.
  d. click on 'Apply' to validate the changes.

  Click on general tab and then click on 'Print Page of Test' to confirm that the changes fixed the problem.

  You can also check out the links for more information.

  Printer problems in Windows: http://windows.microsoft.com/en-US/windows/help/printer-problems-in-windows

  For any further assistance, I suggest you to contact HP printer Support.

  Here is the link: http://www8.hp.com/us/en/support-drivers.html

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• Photosmart 5514: How to print wireless photosmart 5514 without router (from iPad 3 g)

  I want to print wireless air of the ipad 3g (wireless) for photosmart 5514 without router.  I don't think that the printert has a direct wireless option.  Kind of printer in order to broadcast, it's own 'signal' that my ipad can communicate via?

  Hello

  The printer is not compatible HP wireless live indeed, I'm afraid, it requires a router to allow wireless connectivity.

  The printer does not support ad-hoc connectivity and will not broadcast its own SSID.

  Kind regards

  Shlomi

• Extremely slow printing wireless with HP Photosmart Premium C309g-m

  I see extremely slow print speeds when printing from a Mac or a Windows XP system on a new printer HP Photosmart Premium C309g-m wireless. The printer starts printing immediately when I request a print, but it only prints one line. It will take about 15 minutes then to print the rest of the page, each print after a very long break line. Print demo page doesn't exhibit this problem, only documents of programs such as Word 2008, Safari, and Firefox (I tried firefox on PC and Mac) are affected.
  
  If I connect to the printer via a USB connection it prints very well, so this problem seems to be the only wireless printing.
  
  Printer: HP Photosmart Premium C309g-m
  Computer: Mac mini (late 2009 model) (also tried a Windows XP laptop, by comparison using the latest drivers from the HP website)
  OS: Mac OS X 10.6.2 with all available updates installed
  Method of connection: cable Ethernet connection to the router wireless
  Printer drivers: version 2.2.1 (Apple provided, drivers HP never installed as system comes with 10.6)
  Wireless router: Apple TimeCapsule (early 2009) 1 TB, honing a/d and modes of b/g on 2.4 and 5 GHz. TimeCapsule is in transition as the DSL modem handles DHCP service mode
  Encryption: WPA2 Personal, no MAC filtering or hide the SSID.

  IP addressing scheme: all addresses are distributed by the server DHCP without reservation of any kind

  The TimeCapsule is sitting three inches from the printer and the printer indicates the complete signal. Connecting the printer to the wireless network and setup of the printer on the Mac went off without a hitch. Only when you print a test document discover us the problem. The wireless network will behave as expected when you access Internet from Mac and Windows devices (tested with a laptop computer Dell XP and a MacBook with OS X 10.6.2), so I don't see any problem with the wireless network together.
  
  Attempt to use:
  1 reboot and power off, wait, restart the computer
  2 reset the print subsystem, the printer off and on again and reinstall the printer

  3. disconnect the power to the printer and let it sit for several minutes before trying to print wireless.
  
  None of them worked.

  I don't know exactly what is happening... I'll have to think about.

  Looks like you're running with the current configuration.

  Can we call this resolved?

• P1102w printer: have new router and can not figure out how to print wireless at P1102w printer - he sees old router

  I installed a new router (Netgear R6220) and cannot figure out how to get the P1102w printer to recognize the new router. It shows the former name of the router (Belkin.833) on the test page and displays the IP address configured by AutoIP rather than DHCP as the old router does. The computer is a desktop Dell Dimenstion about 3 years and use Windows 7. The router connects to the computer to the Internet.

  Help - How to make the printer recognize and communicate with the new router? (The original installation instructions don't seem to work for me.)

  I made an update of the firmware a few months ago and the currtent datecode is 20130703. Allowed to print from my Samsung S2 Tablet through the router.

  Here's what finally worked.

  1 had to withdraw from old installation CD but Uninstall selected, so I completely shut down the computer. Guy at Best Buy said to "remove the device" but it was not enough.

  2. download install the latest software from the HP download site and ran it. (http://ftp.hp.com/pub/softlib/software13/COL32431/bi-80329-11/hp_LJP1100_P1560_P1600_Full_Solution-v20120831-50157036_SMO.exe)

  3 downloaded another file and ran it. (Setup_IP4, [192_168_1_5], [NPI073E2D] _it) Not sure where I found this one, but the software prompted me to run.

  Finally, everything works and all devices are wireless printing

• Using my printer wireless uses one of my monthly GBs?

  My wireless printer is hooked up to my router so that means when I'm scanning (IE just work offline) I'm using one of my monthly data?

  Wireless printing does not mean that I use data because I have to send it to the HP printing Center before he goes to my printer? At least that's what I understood the instructions to mean - maybe I'm just confused!

  Hello

  For all local print jobs, it does not use data, because it runs on your home network. For ePrint (using his email address), Yes, he must use data from internet and HP servers.  Under normal conditions, it also uses the data to 'talk' with HP servers to get information such as firmware etc... but should be very little.

  Kind regards.

• Satellite A60-106: How can I remove the old CD/DVD player

  Hello
  I have a Satellite SA60-106 and want to date my DVD/RW X 1 on a 8 X DVD/RW.
  How can I remove the old DVD to replace with a new one.

  Please help if you can email [email protected]

  Hi, Malcolm

  For this model of laptop, it is quite complicated because the STRANGE is from both sides. First you must remove the small screw placed in the Middle near the coverage of memory in the lower corner of your laptop (also near the cooling rack). The STRANGE is also secured with small hook placed under the keyboard.

  At the right place of this small hook is not known but I know that it is placed somewhere under the keyboard. I don't really know what you need to do. Have you already tried to remove the keyboard?

  I have to be honest and it's not so easy to give instructions here because I don't know if you're familiar with the disassembly. I don't want damage you something on your laptop. Small error can ends with a broken plastic cover. Please be careful.

• How to disable wireless on a Photosmart Premium printer

  I just bought a HP all in one Photosmart premium in the hope of setting up wireless in my office; Unfortunately, implementation of the company does not allow me to do and I can only put up with the USB cable. How can I turn off the wireless? I cannot find a command in the touch screen to do and don't see anything in the manual either. Thank you!

  There may be a button (under the blue light nearby).  Or it will be in Setup > network > Wireless Radio.

• How to print PDF using BI Publisher or Apache FOP in APEX 4.0.1

  Hi friends.
  
  I have a problem with APEX and print output to PDF report.
  
  My configuration is:
  1 database: Oracle 11 g 2 Standart Edition
  2. APEX version: 4.0.1
  3. earphone APEX version: 1.0.2.238.15.24
  4 oracle WebLogic Server version: 10.1.3.3.0
  5. version of oracle BI Publisher: 10.1.3.4.1
  6. Apache Tomcat version: 6.0
  7. cocoon version: 2
  8 the Weblogic Server, BI Publisher, Apache Tomcat installation operating system is Windows 2008 32-bit server.
  9 operating system to install the database is HP - UX 11i
  
  Ive set up a weblogic Server with BI Publisher and I have also configured the print properties of the APEX server with the following parameters:
  Print report tab.
  Print server: Advanced (Rqueries Oracle BI Publisher)
  The print server protocol: HTTP
  The print server host address: 174.17.49.106
  Print server port: 7001
  Print server script: / xmlpserver/convert
  
  When I want to print the report in PDF format, it returns me the following error:
  ORA-20001: the print engine could not be reached because the URL is incorrect or a proxy URL must be specified.
  Error failed
  
  I search for documentation, but I still can't print the report.
  
  I would appreciate if any of you can help me understand this

  See the section "4.4.3 activate Network Services in Oracle Database 11g" in the following link...

  http://download.Oracle.com/docs/CD/E14373_01/install.32/e13366/db_install.htm

  This will help you better understand.

  Thank you
  Machaan

• HP Photosmart C4380 [8A36CB] communication error with MacBook OS 10.7.5 more wireless

  Hello

  I get the message 'communication error' when I try to print wireless at a Photosmart C4380 of my MacBook (OS 10.7.5) through a Router 2 GB TimeCapsule.

  The message also says: "/ usr/libexec/cups/backend/dnssd failed ', but I don't know what to do with...

  I tried to de - and re - install, reboot the laptop, printer and router and pull all the plugs in different sequences, first use the USB cable to install wireless and any other help HP... but nothing seems to work (doctor of HP is not available for Mac).

  The weird part is that:

  1. He started a couple of weeks, without having changed anything (to my knowledge),

  2. printing of my iMac works fine (same network, same software, same settings version, etc.)!

  2. printing via the USB port on my MacBook works fine

  3. can I print a test page form "Utility from HP" my MacBook (and of course my iMac but it works very well even when)

  4. I can access the printer through "http://hp8a36cb.local./index.htm?cat=info&page=printerInfo" and there is just no problem not mentioned whether,

  5. the "Configuration Page of HP network' and the 'wireless network Test report' congratulating me for the installation of my printer wireless... but it doesn't work.

  I read almost all messages on communication errors more wireless but that you have not found an answer to my question (yet).

  Is there anyone with a solution? Please?

  Download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

• My HP photosmate printer is connected to my network as it is my laptop but I can't print wireless

  My HP photosmate printer is connected to my network as it is my laptop but I can't print wireless, if the usb port is located.

  How to print wireless or do I just remove printer and reinstall? Thanks for the help in advance: o))

  You install the printer on your laptop using the printer cd or the direct download of the full features software HP site.

• Printing Photos using Revel

  How to print photos using Adobe Revel?

  You can't print directly from Revel currently. You can upload photos and then print from your computer.

  If we had this feature, what would you do with it? Print from your computer, or print from a service? Print snapshots or photo print gifts?

  Guinot