pop and sound click on touchsmart tm2

I have a TouchSmart tm2-1000 whenever I play all the sounds (especially headphones) it's very noticeable pop and clicks.  I went to the IDT parameters and found a battery that option although on can cause POPs and clicks but when I turn it off nothing changes.  I tried many other settings unchanged.  I don't not blare my sound, so I highly doubt they are blown and if they were I don't think it would affect the headphones.  My computer is almost new and has received absolutely no damage. Help appreciated!

Problem solved.  I sent an email to the technical support of HP and got instructions to completely uninstall the IDT audio CODEC then reinstal with recovery and it worked.

Tags: Notebooks

Similar Questions

  • Popping and clicking Audio distortions on HP Pavilion

    I have a HP Pavilion p6654y and lately, whenever I do anything audio related, including Youtube and the steam games I get clicks, gal, pop and distortions in my audio. It doesn't happen when I watched a video that I downloaded earlier, then I tried disconnected from the Internet and played Deus Ex. perfect audio and video quality. I think its an internet problem, but I have no idea how to solve this problem. Any help is greatly appreciated, this had led me in the wall for the last few weeks.

    Hello IReallyNeedThis,

    I understand that your audio does not work properly when connected to the internet.

    Here is a link to reset IE.

    If he has not visited for a long time the problem started, you can run a system restore.



    This will bring the system back to when everything worked correctly without affecting your personal files.





    Here is a link on how to do a restore.

    I would like to know how everything goes.

  • After I restart my iMac and double-click on the hard drive, a pop up appears with this message: 'the 'Hard drive' file cannot be opened because you don't have permission to view its contents.'.  What is the problem?

    After I restart my iMac and double-click on the hard drive, a pop up appears with this message: 'the 'Hard drive' file cannot be opened because you don't have permission to view its contents.'.  What is the problem?

    Is the name of an external drive or internal one?

  • Settings.ini, sidebar does not display - A pop-up says "settings.ini is being used by another process. Close other programs, and then click Retry. »

    My sidebar is not displayed in my administrator account. A pop-up Windows says 'settings.ini is being used by another process. Close other programs, and then click Retry. "However, no other program does run I know. I'm not able to access using Windows, the window is empty and shows that the site is under construction. Internet access seems to be hampered. This problem is not on my user account on the same computer, and I saw Windows Help on my user account. Also I tried to do a system restore and it was unsuccessful both times.

    The profile of the user of this account may be damaged. You must create two new accounts administrator and use one to copy the data from your current account to the new account on the other.

    http://Windows.Microsoft.com/en-GB/Windows-Vista/fix-a-corrupted-user-profile

    I managed to fix this time by running the Fixit http://support.microsoft.com/kb/886549

    Some of the registry keys that repairs this Fixit seemed to have been corrupted by a facility in need of elevation on behalf of administrator halfway through user account. It is interesting to try everything first to see if that fixes it. I always keep a few spare administrator accounts available now.

  • Audio quality: Popping and cracking sound in WMP and iTunes

    Original title: Audio quality: popping and cracling sound

    Hello.
    When I play certain CD on the computer using wmp or itunes.there is a sound dry and crackling sound that plays and general quality.these low CD are new and have store bought.anyone ideas how they could work properly.

    Thank you.

    Hi leonhal,

    Are you having the same problem with the files on the computer?

    Two things you can try:

    Method 1: Turn off audio enhancements

    Reference: to disable improvements audio speaker

    Method 2: Update sound card drivers

    Because the problem recurs in many of the CDs as well, try to update your sound card drivers. Most of the problems seem to be caused by the wireless, video and audio drivers being unable to work together properly. Like the manufacturers to find solutions, they are incorporated into the latest version of the driver. If it's a good idea to keep up-to-date. Reference: update drivers: recommended links

    For more information about this problem, see: what can I do on the audio problems, such as popping, crackling, or sound that plays too fast or too slowly?

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Popping and crackling sound question

    Hello!

    "I have a" desktop PC HP Pavilion 500 - 205t CTO using Windows 7 and IDT High Definition Audio CODEC.
    I bought the computer in April.

    May I noticed was that a glitch will start appearing in the sound. POPs and crackles in the audio playback, any device, no matter the speakers or the headphones, any outlet. I even tried the different outlets for computers and the different power strips. According to the HP website, my audio drivers are up to date.

    The problem is getting worse over time until I've restarted. Then the sound would be perfect for the 12 to 48 hours to which the question referred.

    A DPC latency Checker showed that over time my latency increased also, and POPs and crackles corresponded with an increase in latency.

    WRPUI revealed that, during a period of high latency audiodg.exe had a count of 1 563 and a weight of 1 517. I have no idea what means the data, but I've heard some people know leaks memory with audiodg.exe and I wonder if it could it be. The fix for microsoft says DO NOT install it unless you are sure... and I'm not sure.

    I also heard rumors that HP do not keep drivers up to date on their Web site. So I wonder if there is a more up-to-date version my IDT there. My current version is 6.10.6491.0

    Any help is appreciated.

    Hello

    Check the updates of Windows, can be a sound driver for your system. If so uninstall the
    Update. And don't forget to check the new Web site of the manufacturer for the latest driver. And stop the
    automatic installation of updates of pilot then manually check for new drivers.

    How to uninstall a Windows Update in Windows 7
    http://www.SevenForums.com/tutorials/24373-Windows-update-uninstall-update.html

    ============================================================

    How to stop Windows 7 automatically install drivers
    http://support.Microsoft.com/kb/2500967

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • How to change the highlight color, click the button image and text and sound.  are there packages of buttons for use in my project?

    How to change the highlight color, click the button image and text and sound. are there packages of buttons for use in my project?

    Hello

    Even if the point of things based Web links buttons created using them is of simple images. Captivate uses simple images. If you need to put your creative hat and not to let the fact that you see the word 'web' scared you somehow. An image is an image. Use on the web, use Captivate. Same case!

    If you change the properties of the button, you can activate the legend of success. Fix any sound that you like with the legend of success and it will play when you click the button. If you do not want to see the legend of success, delete the text and configure it as transparent.

    See you soon... Rick

    Useful and practical links

  • Want to Phoenix 810 110eo: popping/static Sound on HP Envy Phoenix 810 110eo

    I got in trouble for a long time now, with sound as a pop/static sound every once in a while, watching youtube videos or play video games, I googled the question several times, and the most common solution appears to be trying to update your BIOS and Driver sound

    However, when I go to the Page of the driver and find the drivers for my PC, there is no such thing as an update of the BIOS, my running BIOS Version currently is v80.17 and from the end of 2014, which seems a little old for me, as well as the fact that I still have this problem when I bought the computer a year ago.

    Anyone know what could be the solution to my problems sound? would it be dust in the computer? outdated drivers? I downloaded the latest sound driver, and yet, the problem seems to persist

    Hello @TheGreatFish,

    Thanks for the quick response!

    Try these steps and let me know how it goes:

    1. Go to the Windows Device Manager > sound, video and game controllers section.
    2. In the audio device drivers list, find Tempo High Definition Audio Driver (IDT Original).
    3. Right-click and select disable. Down arrow on this driver, indicating it is disabled. (NOTE: at this point, you will not be able to play music files.)
    4. Right click and select Update driver software.
    5. Select Browse my computer for driver software.
    6. Select Let me pick from a list of drivers for devices on my computer.
    7. You should see a window that says Select the driver to install for this hardware device. NOTE: If you see a window that says something like This is the best driver for this device, close the window and repeat steps 4, 5 and 6.
    8. In the scheme box, select Audio device high definition (this is the device driver audio substitute) and click Next.
    9. In the Update driver warning window, click Yes. You should see a confirmation with thehigh definition Audio Device display window. Click on Close.
    10. In the list of drivers of audio device in the section audio, video and game controllers, you will notice that the high definition Audio device now displays.
    11. When prompted to restart, click Yes

    I hope this helps.

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great weekend!

  • HP TouchSmart tm2t: notebook PC HP TouchSmart tm2, S/N: [redacted], product number: upgrade memory WU663AV

    Hello!

    You could tell me please what is the maximum memory size for the laptop and what type of faster memory modules can be installed?
    I tried to find this information in the world, but without result.

    I want to replace the two memory modules to get the maximum size and speed.

    Thanks a bunch!

    Hello @GrEbGrEb,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

    I understand that you want to update the Modules of memory in your laptop.  I'll be happy to help you with this!

    Based on the following guide, here is the information for add-on memory for your laptop:

    HP TouchSmart tm2 Notebook PC - Maintenance and Service of Guide (Chapter 1, Page 1).

    Memory

    ● two SODIMM slots

    ● accessible, extensible Client

    Support Dual-channel ●

    ● memory DDR3, 1 333 MHz, may be downgraded at 800 MHz

    Total system memory of 8192 MB (4096 MB x 2, dual-channel)

    System total 6144 MB (4096 + 2048 MB) memory

    Total system memory of 4096 MB (4096 MB × 1; 2048 MB x 2, dual-channel)

    Total system memory of 3072 MB (2048 MB + 1024 MB)

    Total system memory of 2048 MB (2048 MB x 1; 1024 MB x 2, dual-channel)

    If your system can support up to 8 GB, 2 x 4 GB Modules from memory.

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great weekend!

  • Difficulty for the inhibition of the mouse and other 'clicks' does not

    I followed the procedure described for the inhibition of the mouse and other clicks in Internet Explorer (model sounds, set Start Navigation and window block pop-up 'None', click OK), but the clicks continue.  When I call to the top of the window of his plan once again, the speakers are back next to Start browsing and Popup window blocked.  How to make it so that just listening to music is the only sound?

    Start > Control Panel > sounds & Audio > sounds tab and disable these windows sound you want / need.

    TO return to your pop-up windows, disable the blocker.

    By doing this, you can have a gogo advertising. That being said, if the site that you are using ActiveX controls for pop-up windows, you should get a choice to accept or decline their of this particular Web site (between the main window of IE and the toolbar).

    See you soon,.

    Jerry

  • Music and sounds of the game won't play; all other sounds work

    I have an iPod 5th generation touch. I checked my volume and the volume of ringtone and leaves. All the sounds are turned on. I checked for if sure speaker working, (it does because the music plays and keypad lock and sounds of device clicks), and I checked in game controllers and all sense I could think of to make sure sounds is enabled. I check everywhere he looks good, but the sounds of the game will not play AGAIN. I'm starting to think that maybe it's a problem of material with my iPod touch 5g because I also have a 6g-key and everything works on it just. Does anyone have any ideas if I could solve this problem?

    Try:

    -Reset the device iOS. Nothing will be lost

    Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

    ten seconds, until the Apple logo appears.

    -Reset all settings

    Go to settings > general > Reset and tap reset all settings.

    All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

    -Restore from backup. See:

    Restore your device from an iCloud or iTunes backup - Apple Support

    https://support.Apple.com/en-us/HT204184

    -Restore factory settings/new iOS device.

    If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

    Shop Apple Store - Genius Bar

    https://www.Apple.com/retail/Geniusbar/

  • Need help finding the touchsmart tm2 touchscreen driver (s). Win7 32 bit

    work on a touchsmart tm2. Number is WQ703UA #ABA

    Just installed the operating system Windows 7 Home Premium 32-bit

    No error message, but not touch either ability.

    A change made to the system: my computer did a fall from a table on the hard ground. The hard drive has been damaged. It worked just well enough to get into the safe mode and copy off all my files. (Thank God!) But I had to buy a new hard drive for it. So I start from scratch. I was not able to locate the touch screen driver that would allow me to interact with my screen.

    Can someone help me to find it and or do this thing fixed? Thank you very much!

    t

    Here are the specifications of your HP tm2-2052nr laptop. According to the specifications, it comes from the factory with Windows 7 Home Premium 64-bit. You must have created a set of HP recovery disks when you set up your computer. These discs would restore the system to a factory like State in a situation like this.

    Drivers for your system are located HERE , but I have not found a 32-bit driver for the touch screen. If you wish to order discs of HP recovery, call or email HP customer care to order.

    If your HP tm2-2052nr was purchased from Microsoft instead of HP, please read THIS.

    Frank

  • Satellite P500 - fan too loud and makes clicking noises

    I recently bought a Toshiba P500 - in late October / early November, and recently the hard drive continuously flashes when there are noises rattling from the laptop (even if im not doing anything)

    Also my fan will get random REALLY loud but usually run mediumly hard all the time, I rarely hear really calm even when I start it first to the top and nothing is running

    The laptop itself is on my desk and high upward so that the fan is fully ventilated, as the surface is regularly wiped away (about twice per week)

    Hello

    If the clicks or hit its happening with disk HARD high use and sounds like a light tap with a light hammer on wood then this is your HARD drive and not necessarily fan.
    Fans usually have a hummimg and more regular sund whining when not.

    First thing I would do is take you a laptop somewhere cool temperature and prepare to back up the files on your HARD drive if you have not already.
    Second thing, it is to install a utility that will allow you to analyze the indicators SMART for your HDD (s) - mine has 2 drives x 500 GB, that should tell you if the HARD drive it's about to die.
    There is also a diagnostic utility called PC Diagnostic tool available via all Prorams/TOSHIBA/utilities if you have it installed.

    I would look then by contacting your local Toshiba support center to get your macine checked and covered in any warranty replaced elements.

    BR /.
    Rob

  • I want to order a recovery media for my touchsmart tm2-2090ee?

    Dear HP,

    Drive HARD original stopped (not more feasible), I bought another HARD drive and I want to order the recovery media to return to the original PC configuration.

    I bought the laptop in the region of the Middle East - Jordan, and now I'm living in the United States.

    my laptop is: Touchsmart tm2-2090ee, S/N: [serial edition number].

    OS: Window7 pre home

    Thanks for your help

    You are welcome.

    It seems that you will not be able to order the recovery disks.  Therefore, you will need to purchase a full copy of the operating system.

    In the future, you should make sure to create recovery disks when the computer is new.  This will save you a lot of problems.  I made the same mistake myself.  It's not a good feeling when you don't have the disks.

  • TouchSmart tm2 the usb hub controller are not not in Device Manager

    I have a Touchsmart tm2. Device Manager not tilts my USB Controller. There is a list with the yellow flag "unknown device". I tried to uninstall and restart. Problem persists. Therefore, none of my USB ports work. This issue coincides with the arival of the malware "mysearchdial" who took my browsers. My laptop is running Windows 64-bit edition, prepared of 12 GB of RAM.

    Thanks again. I have at least the link to Microsoft Essentials.

    I did use True Image Home to restore my OS on a previous image drive, October 2011. I had tried several times until I realized that I needed to be connected directly via ethernet and not wireless.

    It took an eternity o all updates, but now my Touchsmart is as good as ever.

    Thanks again for your response.

Maybe you are looking for

  • Re: Difference between Portege M800-105 and 107-M800

    Hello Anyone know the difference between M800-105 and 107-M800?

  • Satellite L670-1EC - low connection speed WiFi - only 65Mbit/s

    Hello How can I rotate at high speed on my wifi draft n card? My TV connection to the router with speed 130Mbit/s.What is happening with the wifi card in ouer L670? In the specification is 802.11b/g/n, but it doesn't work!Where is the map? To achieve

  • How can I build a permanent application on a MCB2300?

    I got an evaluation board (MCB2300), I can create a simple application and download it to the Board of Directors and run it using the ULINK2 debugger. but as soon as I disconnect the debugger from the Board of Directors, the Board stops running. I'm

  • Help with plug

    I need help, trying to find the specs on your motherboard. http://www.Amazon.com/Lenovo-ThinkCentre-M55-43C7178-motherboard/DP/B008KFDE5K/ref=sr_1_415?s=PC&IE=...

  • LabVIEW Canopen Heartbeat

    Hello Now, I build a Canopen GUI, which should be able to check the heartbeat of 50 devices. But it seems that I have to build 50 parallel loops to do this. If I want to do series, can it take too much time for the verification of all devices. If som