Pop/clicks in audio when you use an external DAC of lightning with iPhone 7

Similar Questions

• IMAQ Grab Acquire.vi error when you use an external trigger on a card NI PCIe-1433 (sync problem?)

  According to my recent post on getting up and running with the NI PCIe-1433 camera link card, I ran into a bit of a snag.

  When you use the internal trigger on the camera, everything works 100%. I can view all the data from the camera in MAX as well as in the labview project. However, whenever I have set the mode switch is where things start to fall apart.

  What I have confirmed:

  -Camera is switching between inside and outside triggering.

  -NI PCIe-1433 camera link card is set up properly. While in external mode, I can trigger the camera by using a function generator and check the wire to the MAX. Everything works fine.

  When the unit is in external mode, the function Acquire.vi enter IMAQ - my mistake VI. The error is:

  Code :-1074397150

  The possible reasons for a timeout.

  Now, I have it set up so that a mistake here will not end the LabVIEW file. Sometimes, data of interest makes however (about every 10 seconds-ish). So what seems to be the case, it's that this external trigger signal is not in the lineup when the clamp is attempted. Is it possible to synchronize these? May reference the trigger signal external sort in my LabVIEW project so that the clamp is performed only when that trigger impulses?

  So I solved my problem. He was in time. The external trigger that I used for the device was simply too slow. I was initially using a trigger from 2 Hz to be able to view the values changing on LabVIEW probes. But it was enough to get enough data to move above the camera cable to assemble a picture and kept it in time. Travel up to 9 kHz solved the problem. No adjustment to the camera settings or LabVIEW code was necessary.

• Cannot move all the files as windows explore crashes - it happens every time when you use an external hard drive (several readers have been tested and work on other machines)

  I need to move files on my laptop, but windows crashes Explorer everytime I try this. This also applies when you use an alternative program to explore. It didn't happen last week but regularly spent the last six months. It is now that I need to migrate these files (mainly the images, but also the music and office documents).

  The error in the Event Viewer log States the following: start the application failing application Explorer.EXE, version 6.0.6002.18005, time stamp 0x49e01da5, failed module unknown, version 0.0.0.0, time stamp 0x00000000, exception code 0xc0000005, offset 0x02db07e0, process id 0 x 1650 error, time 0x01ca547fd1de6851.

  Thank you

  Make sure that the device is compatible with Vista, the Vista Compatibility Center: http://www.microsoft.com/windows/compatibility/windows-vista/default.aspx.

  If you need to get pilots to leave the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.  You need to find the NAS device and the NICs in particular - but it would not hurt to look at all the when you're there.

  Go to start / Control Panel / Add Hardware and select the first option (recommended) to see if the system can detect the device.  If this does not work, choose the second and provide the information requested on the device.  You will be asked for drivers - have their practice.  Follow the prompts to install the device (NAS).  Make sure that it is plugged in and turned on when you do so, or he not be recognized.  It's the hard way of installing a hardware device, but your system obviously isn't automatically recognize it then do it manually. Here is a brief tutorial on how to do so: http://www.web-articles.info/e/a/title/Windows-Vista :-Running-the-Add-Hardware-Wizard /.

  I hope this helps.  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• Total failure Audio when you use citrix Gotomeeting software

  The following message appears in the event viewer after I have begin to access a meeting using gotomeeting from citrix software. In order to return audio I have to reboot.

  Failing application AUDIODG. EXE, version 6.0.6002.18005, time stamp 0x49e02218, module failed unknown, version 0.0.0.0, time stamp 0 x 00000000 exception 0xc0000005, offset 0xffff0000, process id 0 x 504, code 0x01cab0f35733f883 application start time.

  Hello.

  • Were you able to use this software sucessfully without this error before?
  • What changes have been made on the computer before this problem?
  • You are able to hear the sound on your computer when this happens?

  Try disabling the enhanhcments on your computer and check if that helps.

  1. Open Audio devices and sound themes by clicking on the button start picture of the Start button, click Control Panel, hardware and sound, and then clicking sound.

  2. on the playback tab, click speakers, and then click Properties.

  3. click on the enhancements tab and then select Disable all improvements.

  If you do not see the enhancements tab in the speakers Properties dialog box, these features are not available for your speakers, and this procedure is not applicable to your computer.

  If disabling audio enhancements solves the audio problem you are having, this indicates usually that your audio driver needs to be updated. If disabling audio enhancements does not resolve the problem, contact your computer manufacturer for assistance.

  For more information, see the link below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-stop-my-music-from-skipping-or-breaking-up-when-I-play-it

  Also, you will need to uninstall and reinstall the software and check if that helps.

  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Let us know if this helps

  Concerning
  Anthony.

• Chase activity page has only to load the links "I wish" when you use Mozilla Firefox, but will be with Internet Exployer

  Chase Bank is still making updates to their website. In their last update useful links on the activity page simply doesn't appear not under the heading "I want to". Even the title "I wish" does not appear. The side of the page is empty, but if you use Internet Explorer all the links to there. Does anyone else have this problem, use the Chase Bank?

  Found the cause of this problem, I had a program running called Ad Blocker. When I disabled this program, links have become visible. I'll use the other suggestions posted this message.

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

• Laptop crashes when you use an external monitor

  Hi, my laptop still crashes when using an external monitor. So far ive tried s-video and vga, but still no joy. This can happen after a few minutes or sometimes after a good few hours, and it seems to crash more frequently during playback of movies, games etc... There are a few signatures of different problem most to come including this one:

  Signature of the problem:

  Problem event name: BlueScreen

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 2057

  More information about the problem:

  BCCode:                                              116

  BCP1:                                                   8688F510

  BCP2:                                                   8E01FB5A

  BCP3:                                                   00000000

  BCP4:                                                   0000000D

  OS version: 6_0_6002

  Service Pack: 2_0

  Product:                                              768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\Mini012710-01.dmp

  C:\Users\Jack\AppData\Local\Temp\WER-62384-0.SysData.XML

  C:\Users\Jack\AppData\Local\Temp\WERF852.tmp.version.txt

  Read our privacy statement:

   http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Maybe a problem with my graphics card drivers? This is my first post and I'm not sure if this is really anything that someone would be able to help me with that I don't really know anything about the wiretap, but tips are very much appreciated.

  Vista 32 bit

  ATI Mobility Radeon HD 2600 graphics card

  Thank you

  Hello j.d.1882,

  1. you have the latest drivers installed for your graphics card?

  I suggest that you update the drivers for the graphics card and check if the computer continues to crash.

  In addition, I suggest that you download the dump files to check exactly what may cause the problem.

  Athttp://skydrive.live.com using your Live ID and I will check:

  a. Click Start, select run, type '% SystemRoot%\Minidump' (without the quotes) in the search box and press ENTER.

  b go to your desktop, right-click on it and create a new folder named "Dump".

  c. copy all the files in memory dump (it looks like Mini092003 - 01.DMP) in Minidump in this folder.

  d. right click on the folder of the image, click on "send to" and click on "compressed file (zipped).

  e. Please download the ZIP file.

  You can check the link for more information below:

  http://support.Microsoft.com/kb/307973

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Turn off display when you use the external monitor R61?

  Hello

  I have a ThinkPad R61, which I use with an external monitor.  Somehow, I had in place for months with the laptop out of the screen and the monitor on.  I've used today at a meeting to feed a projector, selected somehow dieting Fn F7 of presentation such as the screen and the projector are-as I wanted - then home, re-installed with my external monitor and cannot find out how to turn off the display on the laptop.  The selections under Fn F7 do not allow this combination.  I tried the trick you offered, Fn F3 to turn off the display, but it turned out the two views.  (Now, how can I reverse this setting?)

  It sounds like a requirement of switching every day, but I can't find a clue in aid of ThinkVantage, manual mini, on the website, etc.  Thank you

  WaynO salvation,

  After pressing Fn + F7, click on manage plans... to open the Director presentation window. Then click the new... button. You should be able to put in place a system to only display on the external monitor. After setting up, make sure to check the box in the column Menu Fn + F7 to have your new schema appears in the menu when you press Fn + F7.

• Unable to get the maximum screen resolution when you use the external monitor

  Hello

  I use Windows 8 on laptop ASUS K55A. I use an external monitor (Samsung SyncMaster 2233BW). Everything works fine except that I do not get the maximum resolution on the external display. The only way I see a sort of an overview of the good resolution is when I choose "extend these screens", but it's very uncomfortable when there's always one screen, I don't actually see.
  How can I increase the resolution of the screen on the external screen? (now, it's on 'show desktop only on 2')
  Thank you!

  I use Windows 8 on laptop ASUS K55A.

  So first a Bing search finds that ASUS K55A probably has the chip Intel HD 4000

  Then,

  https://communities.Intel.com/thread/30360

  (BING search engine for)
  Two monitors specifications Intel HD Graphics 4000

  )

  Graphics card Intel doesn't support double bond, so 1920 x 1200 is the maximum for DVI and HDMI, 2560 x 1440 is only possible with a display port. This is indicated in each product page.
  

• Incompatible audio when you use headphones on Pavilion DV7

  Hi, I got a new replacement laptop (Pavilion dv7-7008tx with Windows 7 Home Premium 64-bit) HP last Friday, June 8 and immediately noticed that playing media with headphones connected files, audio is silent in places and then builds up in others. When I replay certain parts repeatedly, it's always quiet and noisy in the same places. Without headphones, audio is fine.
  
  I tried to uninstall the audio device and restart the computer could install the latest driver once rebooted, but the problem remains.

  I tried to look for a solution on Google, and people made the assumption that it has to do with the parameters of development (although most of the time it has not solved the problem in any case), but the deirections they let you access these settings do not apply to this laptop, and I can't find any place to change the development settings.

  Hello

  Reset the default settings of the bios as follows.

  NOTE:  In the Bios Menu, note the current Version of the Bios

  Shut down the laptop.  Tap here to f10 as soon as you start Notepad to open the menu of the bios.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  When windows has reloaded, go through the process below to install the original auido software.

  ----------------------------------------------------------------------------------------------------------------------------------------------------

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp56001-56500/sp56155.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, if you do, check the box allow this and then proceed with the uninstall.

  When finished, restart the computer and let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click set as default.

  ----------------------------------------------------------------------------------------------------------------------------------------------------

  Check if the problem of helmet is still apparent and let me know.

  Also, let me know the current Version of the Bios.

  Kind regards

  DP - K

• Fluctuating audio when you use internet in Pavilion N-012TX

  In usinf HP Pavilion N-012TX (windows 8)

  A these days, whenever I try to listen to music while surfing on internet, the audio starts fluctuating and him no matter what browser I use fluctuates during the loading of any page. I did not any changes to my laptop. Help, please.

  Thanks a lot for solutions. It really worked!
  Thank you once again...

• audio service or no sound when you use the computer in safe mode with network

  my computer is workin only in safe mode and I have not all sounds

  http://www.mediafire.com/download/3p645je5c485cg6/activate+sound+in+SafeMode.reg

  This is what worked for me, after you download it to your computer.

• speakers work not when you use the external monitor

  I use a laptop HP Envy and HP Pavilion 25bw external moniter connected via an HDMI cable. With the help of Windows 8.1. The sound is muted when the laptop lid is closed. If I open the lid I hear for about 2 seconds, then it turns off. If I remove the HDMI cable, the sound lights. How can I get the sound to work with the connected 25bw and close the lid?

  Hello

  Please try to hell sound HDMI playback devices

  Right click on the speaker icon,

  Select playback device

  Click with the right button on HDMI sound

  Disable it.

  Kind regards.

• How to disable the touchpad on Dell Inspiron 1545 in Win 7 Pro SP1 when you use an external mouse?

  I would like for the touchpad on my Dell Inspiron 1545 are automatically disabled when I plug in my Logitech wireless mouse.

  Thanks to all who responded.

  I had this mess when I did a system update Dell routine and sent the new Alps driver, who immediately washed Select my previous settings.

  Yes, I tgried to return to the former pilot, who worked flawlsly for many a yearf without success.

  I finally solved the problem, at least on my machine.

  A. Click Start; in the RUJN area type: main.cpl

  B. click on the graph of a touchpad

  C. click DEVICE SELECT

  D. at the bottom of this window, you will see a "Disable touchpad" line preceded by a checkbox. Check the box and now the touchpad is disabled.

  It worked on two Dell laptops different, I've worked on both running Win 7 SP1 with the new driver Alps.

  Good luck to all and THANKS for the suggestions.

  E-mail address is removed from the privacy *.

• First pro crashes when you use the external HARD disk

  When im opening project with clips from external drive it freezes after "locating media", does not even see the window media liaison. I can't use this project more.

  Win10

  ASUS ROG g510

  I7

  GTX860

  16 GB of Ram

  Samusng 256SSD

  Corrsair 480SSD

  + usb 3.0 external hard

  Finaly! If you stuck after tracking media, during your drive are disconnected from the computer and your project contains media from him - just press "ESCAPE"!

• Lightroom spoil the photos when you use the external editor

  Hello world

  When I export images to an external editor, Lightroom moves the image and the copy of it at the end of the stack. This is a new phenomenon, generally the image remains in place and the copy is simply attached to it (chronological order). I use Lightroom 5.7, external editors are PSE 14 and affinity Photo. Problem with the two editors as well. No recent update, no change in the settings. Can you help me?

  Thank you!

  [Left the lounge general Forum, troubled for a specific product - Mod support forum]

  Change the sort order during Capture.

  Use the menu command view-> sort