poping and sound crackling with HP ENVY 15 t-j000 Quad Edition Notebook computer Touchsmart

Similar Questions

• HP ENVY 15 t-j000 Quad Edition: HP ENVY 15 t-j000 Quad Edition Notebook PC - white screen

  Hello

  I have a HP ENVY 15 t-j000 Quad Edition Notebook PC. Recently I started to notice a problem on my laptop.  I have some...

  Help, please!

  Hey @HPENVY15t-j000,.

  Unfortunately your laptop is not setup for a touch screen. This is a link to your page 27 manual replacement parts.

  I hope this helps.

  Thank you.

• Replace drive HARD laptop computer HP ENVY 15 t-j000 Quad Edition SSD

  I would buy a HP ENVY 15 t-j000 Quad Edition Notebook PC and HP v300a 120 GB SATA Solid State Drive with Upgrade Kit.

  Now, the SSD has a thickness of 7mm.

  My question is if I can replace the HDD with that SSD? The thickness is the HARD drive Bay in the laptop.

  If it is greater than 7mm from the DSS moves inside?

  Thank you

  Hello

  The old HDD on your machine is a little thicker, but at least 4 screws I do not think that new SSD will circulate in the case. I have actually put new SSD in one of my laptop (not HP) and no problem, BUT I don't move this laptop. If so, blue tac can help.

  Kind regards.

• Hiding HP ENVY 15 t-j000 Quad Edition w/SSD and hybrid propulsion system. Swap disk for one SSD Question.

  Hi all!

  I bought the HP ENVY 15 t-j000 Quad Edition and opted for the WSSD 24Go cache as well as the hybrid drive 1 TB. Do I have a problem just buy a kit of cloning and spend the hybrid propulsion system to a full on SSD in the future if I choose to?

  I did some research but I can't isolate an answer if yes or no I might encounter problems on account of the Intel RST be "associated" with the traditional HARD drive caching.

  So I wonder if I can't just simply disable acceleration of RST, clone HARD drive for an SSD via a cloning kit, remove the HARD and the SSD drive and call it a day?

  Any help with this is appreciated!

  Purgingomen wrote:

  Thanks for the info but I was even more so, I was wondering if I would have a problem Exchange with a new SSD hybrid drive later by cloning.

  I thought that I would stick with the 8 GB of RAM and WSSD combo of cache/HDD for now and sometimes down the line (as in a year or two) to get rid of the HARD drive for a full on SSD, disable caching and at the same time move to 16 GB of RAM.

  But I don't know if yes or no the WSSD cache/HDD combo makes it difficult to clone and swap the HARD drive and then just leave the disc of "cache" of 24 gigas (which is more a cache drive) there to be upgraded later.

  -Rob

  Well, I think a pure 2.5 "SSD should work on the system but make sure the cache is removed. For the purposes of cloning, I suggest using the DD command:

  http://en.Wikipedia.org/wiki/DD _ (Unix)

• HP ENVY 15 t-j000 Quad Edition: 50 + HP driver/software downloads are absent from the CTO Quad HP ENVY 15 t-j000 Product Support page

  What happened to the HP Software and Driver Downloads for my HP ENVY 15 t-j000 Quad Edition CTO Notebook Model # C8P48AV built in July 2013? There were 58 results software and driver for Windows 8.1 64-bit last week when I printed the list last week. Today, I received the following message when I tried my laptop:

  We were able to find the drivers for your product. Pilots may be developing, so please, check back at a later date or visit the product home page.

  How the hell could all disappear? I hope it's temporary! Extremely disappointed with HP support.

  Thank you banhein! Support page for the software and drivers for my model is back! Happy, it was only a temporary problem.

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-15-J000-Quad-Edition-Notebook-PC-series/5387620/model/5388029

• HP Envy 15 t-j000 Quad Edition: screws fell off the bottom of the HP ENVY

  Hello. Anyone know the size and type of the screws from the bottom of the HP Envy 15 t-j000 Quad Edition ? These are the small screws that hold the bottom cover of the laptop basically. Somehow mine fell and it is causing many problems. The tilt is extremely limited to a specific position. Disturb the position of the laptop while it is will cause a weird vibration because of the fan on the left side.

  If someone could let me know what is size and the type of screws used to lower cover , and where I could find them, I would really appreciate it.

  Thank you

  aquafemi wrote:
  

  I took the screws a few months ago to see if I could fix it something. I didn't want to dirty things too so I just put them back.

  HP Live Kit P/N: 720560-001

  This includes the screws for your laptop.

• Lack of controller driver PCI Communications Simple - Windows 8 x 64 - HP ENVY 15 t-j000 Quad Edition

  I downloaded and installed all the drivers for my product - HP ENVY 15 t-j000 Quad Edition (E4T17AV) - and it still shows a lack of PCI Simple Communications Controller Driver. Can someone point me in the right direction please?

  Is the hardware ID

  PCI\VEN_8086 & DEV_8C3A & SUBSYS_1963103C & REV_04
  PCI\VEN_8086 & DEV_8C3A & SUBSYS_1963103C
  PCI\VEN_8086 & DEV_8C3A & CC_078000
  PCI\VEN_8086 & DEV_8C3A & CC_0780

  Nope.

  That is probably why it is not installing.

  The driver is designed for RAID configurations.

  I know it does not install not in IDE mode, but I wasn't sure of the AHCI mode.

  If you want the latest AHCI driver for your configuration, you can get it directly from Intel on the link below.

  The first file listed.

  Download and unzip it into a folder.  Do the manual update method by going to Device Manager, and then click to expand the IDE ATA/ATAPI controllers category.  Click the listed SATA AHCI controller.  Click on the driver tab, click on put up-to-date driver, reselect the thing browse and navigate to the folder that you extracted the drivers to.

  Make sure that the include subfolders is selected and should install the updated driver.

  https://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=23060&Keyword=Intel+Rapid+Storage+Technology+(Intel+RST) & lang = fra

• Updates for HP Envy 15 t-j000 Quad Edition CTO Notebook PC windows 8.1

  I have updated the system and returned to original Windows.

  Them I have updated to 8.1 windows 64-bit. But I can not find several updtaes as Col. simple 64B? and others who still work in 32-bit.

  How can I get updates for HP Envy 15 t-j000 Quad Edition CTO Notebook PC? 64B?

  Windows 64 b 8.1 is not simple pass 64B? Software updates for 8.1 64B?

  Hi @jezhael

  I understand that you have trouble finding drivers and software for your computer now running windows 8.1 (64-bit).

  You can find the drivers Hp custom laptop from this page, just be sure to select WIndows 64 - bit of 8.1.

  Drivers HP ENVY 15 t-j000 Quad Edition CTO Notebook PC

  See the following download SimplePass if necessary:
  HP SimplePass Identity Protection software

• ENVY 15 t-j000 Quad Edition disk hard thickness

  I'm looking to replace the hard drive in my ENVY 15 t-j000 Quad Edition with an SSD. HP site is not currently in the thick of the preinstalled hard drive. I'd rather get an ssd that leaves no extra unused space in the computer. What is the thickness of the hard disk installed in the ENVY 15 t-j000 Quad edition so I can pass to an ssd the same size? Thank you.

  Hello

  It is very safe to use 7mm thick, as mentioned in my first answer.

  Kind regards.

• HP ENVY 15 t-j000 Quad Edition CTO Notebook PC Audio

  I have a HP ENVY 15 t-j000 Quad Edition CTO Notebook PC e ele formatei e coloquei o windows 7 but after that coloquei o windows 7 Beats Audio REALLY works would any sem Solução o ter as voltar o windowws 8

  Try this driver:

  http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64958.exe

• ENVY 15 t-j000 Quad Edition Type of Ram for upgrade

  I try to add a stick of ram to 8 GB for my ENVY 15 t-j000 Quad Edition. Site HP Web does not list the type/size of ram to find the stick of ram suitable for upgrade. If someone knows this information, it would be a great help. Thank you.

  henry_mb wrote:

  I try to add a stick of ram to 8 GB for my ENVY 15 t-j000 Quad Edition. Site HP Web does not list the type/size of ram to find the stick of ram suitable for upgrade. If someone knows this information, it would be a great help. Thank you.

  Hello

  What is the new portable Haswell? This laptop supports modules SODIMM DDR3 1600 MHz, but take a look what original config is. HP uses memory especially two modules config so if there are already 8GB it will be probably 2 x 4 GB modules. I recommend this one:

  http://www.Amazon.com/Corsair-vengeance-laptop-memory-CMSX8GX3M1A1600C10/DP/B0076W9Q4Q/ref=sr_1_3?s=PC&ie=UTF8&QID=1373665809&SR=1-3&keywords=vengeance+SODIMM

• Want 15t_j100 Quad E2E34AV Ed: 10 Windows upgrade failed - blinking display of Envy 15 t-j100 Quad Edition Notebook PC

  Upgrade Windows 10 failed on my Envy 15 t-j100 Quad Edition laptop.

  Symptom after upgrade has been a video exhibition quickly flashing without control of the PC.

  I have to go back to the previous version - Windows 8.1.

  Back with success on Windows 8.1

  Symptoms point to video card problem after updated Windows at level 10.

  My laptop has two, provided by HP online:

  Intel HD 4600 Grapics (internal)

  NVIDIA GeForce GT 740M

  See the research, that Intel and NVIDIA have Windows 10 drivers for these graphics cards.

  Yet immediately when Windows 10 signing after upgrade, the laptop display has been viewed quickly.

  The only way I could get control of the laptop was CTL-ALT-DELETE to start the Task Manager.

  The Task Manager showed that more CPU resources would "host setting synchronization process.

  Called Microsoft Support - they indicate a likely problem with display adapter driver and advised to "go back" and then contact HP support.   called HP Support and they advised to work with Microsoft.  Great!
  
  Would appreciate recommendations on the way forward for Windows 10.

  Dgood43 wrote:
  

  Initially I found the 10.18.13.5324 Rev.A-NVIDIA graphics driver.

  I was allowing the HP site automatically detect my curent - Windows OS 8.1.

  When I manually switched OS Windows 10, I see it listed.

  I also see 10.18.15.4248 that place listed for the Intel HD 4600 graphics card.

  Can I install both of these drivers before you upgrade Windows 10?

  Both are supported on Windows 8.1?

  If so, why HP Support Assistant would not have install me the upgrade?

  Am I missing something here?

  Install only the softpaq grahips from Nvidia. It will allow to install the two drivers.

  When I click on the button 'Download' blue, it offers two choices:

  Use HP download and install the Wizard (recommended)

  Download only

  This is the second option that you recommend when you say to use "usb flash drive support? Yes. Create an installer of Flash 10 Windows usb player. This is the second choice option.

  Thanks again for your help!

• HP ENVY CTO 7300 dv6t Quad Edition Notebook PC updated bios - win7

  Hello...

  I WANT HP dv6t-7300 CTO Quad Edition Notebook PC , it came with win 8 that I demoted for win 7, I received my drivers of HP Pavilion dv6t-7000 CTO Entertainment Notebook PC.

  I have problem of heat and I want to update Bios, the current version: Insyde F.29 03/10/2013.

  He tried to update pavilion dv6t-7000 me gives error message:

  .. . How update the bios?

  You don't Flash the BIOS unless you get the upgrade for the BIOS of the page of CTO Quad Edition Notebook PC drivers HP ENVY dv6t-7300. Since there is no upgrade BIOS listed on this page, there is no way to upgrade the BIOS. Depending on the exact systemboard and the OS that is installed on your computer, the HP part number will be something like "682174-501", which means "Windows 8 Standard / 2.0 GB of discrete video memory / 45 Watt CPU. The comparable numbers for the dv6t-7000 series is 682174-001, which means "Windows 7 / 2.0 GB of discrete video memory / CPU 45 watts.

  The MAIN of the BIOS is different version, the routine will not allow BIOS flash. IF you force it, you can make your computer does not work. DO NOT try to Flash a BIOS that does not support your computer page.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• HP ENVY 17 t-j000 Quad Edition: back to Windows 8 for a clean install of Windows 7

  Hello

  My machine came with windows 8. I created the recovery using HP Recovery Manager and then CLEAN Media installed windows 7. Now, I want to take the ferry for windows 8. USB recovery I created got no .exe file. And on Windows 7 there is no HP Recovery Manager.  What should I do?

  Thank you!

  Hey @Omar92,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in on your HP ENVY 17 t-j000 Notebook and your issues with HP Recovery Manager. If she has deleted this partition completely, you will need to use your recovery CD or USB key you created when you bought your laptop. Here is a link to use the HP Recovery Manager.

  Here is a link that shows you other ways to restore the laptop back to 8.1 for Windows. The selection shows how to use a USB device.

  Hope this helps you.

  Thank you.

• Upgrade Envy 15 t-j000 Quad Edition CTO to widows 8.1 Pro

  I just rebuilt my notebook of Quad Edition CTO Envy 15 000 t for Windows Professional 8.1 but under other devices, I have a PCI of Simple COmmunications controller by mistake with the following hardware ID:

  PCI\VEN_8086 & DEV_8C3A & SUBSYS_1963103C & REV_04
  PCI\VEN_8086 & DEV_8C3A & SUBSYS_1963103C
  PCI\VEN_8086 & DEV_8C3A & CC_078000
  PCI\VEN_8086 & DEV_8C3A & CC_0780

  I can't know what device drivers to install for this question.

  Any help would be greatly appreciated.

  Thank you!

  Hello

  It's the engine Interface Intel Managent driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63410.exe

  Kind regards

  DP - K