Populating list. Please wait

Similar Questions

• Error: "Please wait while Windows configures Microsoft Office 2000 Professional.

  How can I get rid of the message "Please wait while Windows configures Microsoft Office 2000 Professional".  Apparently, the system does not find a valid source for this.  To my knowledge, I have not downloaded this software even though I must admit that it does not appear in my list of software.  I tried to remove the screws of the Panel control, but to no avail.

  Thank you for your response.  I have now solved the problem by deleting the installation, using the cleanup utility.

  However, I appreciate you trying to help me.

  Annie876

• Windows pop up on my screen that says "Please Wait".

  Original title: pop-up windows

  I continually have the 2 inch Windows pop up on my screen that says "Please Wait".  All color sheets and everything stops until it emerges.  What is this and how do I get rid of him?

  Hello

  ·         Do you use the computer laptop or desktop?

  ·         When exactly do you get this message pop up?

  ·         Were there recent changes made on the computer before the show?

  Follow these methods and check if that helps:

  Method 1:

  I suggest you to update the latest drivers for the graphics card on the computer and check if it helps:

  How to manage devices in Windows XP

  Method 2:

  This article is intended to help you use the resolution of the issues of video display that is included in Windows XP Help and Support Center. This article also provides a list of online support services that may help you solve your problem.

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960

  Connect your computer monitor to a spare computer and see if the error 'Please Wait' always appears. If so, it's a problem with the monitor.

• When windows update, the restart may end, it says please wait and won't restart unless I closed it and open it in safe mode, what can I do?

  When windows update, the restart may end, it says please wait and do not restart unless I closed it and open it in safe mode, what can I do?

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  If the problem continues to repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• On startup, I get the message: Please wait while Wilndows configure installation package 'Destination' Destinations.msi.

  Original title: Windows Installer

  Whenever I reboot Windows Vista Home Premium, I get the following events:

  Windows Installer opens and then I get the following

  Please wait while Wilndows configure installation package 'Destination' Destinations.msi.  I have no idea of what is Destinations.msi and that you have never installed such a program.  He asks me to put in the cd disk that comes with the program.

  Any suggestions on how to stop this very annoying interference every time I restart my computer.

  Thanks in advance for your suggestions and help.  HankL

  Hello
   
  Method 1.
  Let us run Disk Cleanup and then reregister the Windows Installer service and check.
  Stage I.
  a. open Disk Cleanup by clicking the Start button. In the search box, type and then disk cleanup in the list of results, click Disk Cleanup.
  b. in the drives list, click the drive you want to clean, and then click OK.
  (c) in the dialog box disk cleanup, on the Disk Cleanup tab, select the check boxes for the types of files that you want to remove, and then click OK.
  d. in the message that appears, click on delete files.
  For more information see the link below:
  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup
  
  Stage II.
  Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:
  a. in the menu 'Start', click on ' execute:.»
  b. in the "Open" box type "msiexec /unreg" and then press ENTER.
  c. on the menu 'Start', click 'run '.
  d. in the "Open" box type "msiexec/regserver" and then press ENTER.
   
  Method 2.
  At startup, there is a request pending to be updated or installed. We can perform the boot minimum troubleshooting to find this application.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Product configuration... Please wait and then nothing!

  Hello

  I had my HP LaserJet MFP M175 np 100 for nearly two years.  It has been implemented for almost the same two years without problem.  Recently, I tried to add two new laptops to wireless and the majority of wireless laptops connected started having problems printing.  In addition, all the IPAD is connected to the wireless printer could no longer find the AirPrinters printer.

  So I tried to uninstall the driver of any PC laptop, so that I could start over completely.  Now I'm trying to place the main laptop on the connection and when I install the driver with the CD for the printer comes with, it goes through all the steps up to 'Install '.  When he arrives to install and has written to connect to the printer and the PC, I connect the laptop via USB, and then the login step 100%.  The next screen says "configuration...". Please wait "."   Then the meter never passes 15% and wrote the error message that appears: "unable to communicate lease to ensure that your PC and the product are connected via the USB cable and that the product is on and ready."

  Many times I reinstalled the software I've never had this constant message.  I tried on another laptop and it still gave me the same message on that one.  Can someone help with this error message?

  Help, please!

  Thank you!

  Hi @ChristiC ,

  I understand that you cannot set up the printer on the wireless again. I can help you today.

  If the printer is in an error state, it will not be recognized on the computer.

  Power cycle the printer.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Restore the default settings of the network printer.

  • Press the Setup button. (key)
  • Select the network configuration Menu.
  • Then select default settings.

  Print a configuration report to ensure that the IP address is 0.0.0.0 and the SSID is disabled.

  Go to the install button (key) on the printer, arrow to the reports on the right, select config report.

  Check Device Manager to see if the USB printing support has been installed for the printer or with the name of the printer, under Bus USB controllers. How to make in the Windows Device Manager?

  Let me know how the printer is listed, or if you have exclamation points.

  If you have an exclamation point on the printer, right click and update the printer drivers.

  If the pilot will not be updated or you have a composite USB or an unknown device, try and update the driver, if it will not, right-click and delete the entry.

  If the printer is not listed, or would not be updated, unplug the USB cable and run the uninstaller from the CD.

  I disable all the start up programs and temporarily disable the Antivirus software to see if there is a program to interfere in the background. How to use MSCONFIG. Click the Startup tab and click Disable all.

  Then download, save and run the latest drivers. Drivers HP LaserJet Pro 100 color MFP M175nw.

  Test the printer.

  Then you need to go back and enable startup programs and turn on the Antivirus software.

  What operating system you use on computers? How to find the Windows Edition and the Version on your computer.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• VAIO Update: Installation failure: Please wait a few moments, then try again

  Because I installed Windwows 8.1, using VAIO Update to install the software fails.  After that I click on install, the Vaio Update reports 'Failed installation' and "Please wait a while, and then try again."  This problem may or may not be related to Windows 8.1. I have a SVT15115CSX.

  The VAIO Update software tries to install are

  (1) Atheros Wireless LAN Driver Version 10.0.0.260 update

  (2) update driver ExpressCache, Version 1.0.98.0

  (3) Update Version 6.1.8400.28121, Realtek PCIE card reader

  (4) update content manual VAIO Version 1.0.0.10080

  (5) VAIO Control Center update, Version 6.0.20.09270/6.0.19.09270/6.1.12.09270/6.2.11.09270/6.3.6.09270

  VAIO Update also lists Intel SATA Driver Update, version 12.8.0.1016, but said that it must be installed separately.

  How can I update the software with VAIO Update?

  Not too good English, hope you get the idea.

  Launch of VAIO Update app, you will see the list of new software as u said.

  Then comes "left click" on each driver and a browser window opens in a sony support page where you can download the file.

  run the instalation and you will be ok.

• Photoshop starts, spinning wheel and message "Please wait a moment."

  I have a questions from Photoshop CC CC wanted to install the update of the United Nations for Photoshop, Illustrator and InDesign. Since this update program will begin to launch and I see a flash of a screen that should be the license agreement, EULA, and then the message "Please wait a moment." I uninstalled all the CC apps and run the cleanup tool then reinstalled everything and still have the same question.

  

  This seems to be the problem with the activation, perhaps because of the corruption Application Manager or other associated files or folders.

  Anyhw check the hosts entries and see if there is no entry of Adobe with loop back address there?

  Steps to follow:

  (1) right click on the Finder on dock icon and select the option "Go - To Folder."
  (2) you will get a text box, type in below mentioned command and then press 'return '.

  / etc

  (3) it will open the etc folder, look for file named "hosts" and the same screenshot of office.

  (4) double click on the Hosts file, it will open it with TextEdit.

  Check if you can see all Adobe related as entries in the Hosts file 127.0.0.1 activate.adobe.com... etc?

  
  

  
  

  Without these entries in Hosts?

  
  

  Perform a clean reinstall of CC app, follow these steps:

  
  

  N ° 1)

  Click on the Finder and search options listed next to icon located Apple in the upper left of the screen and click on the "Go" menu button and select 'utilities '.

  (Applications > Utiliites)

  Look for a CC Adobe and Adobe Application Manager folder under utility window and trash both folders.

  Step 2)

  Trash Adobe Creative cloud folder from Applications as well.

  Step 3)

  
  

  (1) right-click on the icon in the Finder, then select the option "Go-ToFolder .

  (2) you will get a text box, type in the following command and then press the 'return '. (Don't miss ~ symbol)

  ~/Library

  (3) then navigate to Application Support > Adobe.

  Open file Adobe and trash folders named AAMUpdater and OOBE.

  Step 4)

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.

  (2) you will get a text box, type in the following command and then press the 'return '.

  / Library

  (3) then navigate to Application Support > Adobe.

  Open file Adobe and trash folders named AAMUpdater ,Adobe Application Manager and OOBE.

  Step 5)

  Click on the link below and download & run the cleaning of Adobe tool:

  Select the option "Adobe Application Manager for Mac OS X 10.6" and click on ""clean Selected " ."

  http://download.Macromedia.com/SupportTools/cleaner/Mac/AdobeCreativeCloudCleanerTool.dmg

  Step 6)

  Click on the link below and download Adobe Application Manager and install the same:

  http://download.Adobe.com/pub/Adobe/creativesuite/CC/Mac/ApplicationManager9.0_all.dmg

  Once installation is complete, niche is going disappear, and then open the Application folder and locate the icon to launch Adobe Application manager, double-click it and update.

  Once the update is complete. He shud launch Adobe Creative Cloud app.

  Then try to launch applications installed CC.

• This file is being processed. Please wait until processing is complete, to pass messages.

  When the check 6 accounts on a POP server, I get the message.

  This file is being processed. Please wait until processing is complete, to pass messages.

  This message started 14 2 6 accounts. I tried the suggestions at http://kb.mozillazine.org/Folder_being_processed and none of the suggestions correct the problem.

  Is there anything else I can try?

  Concerning
  AGMNS

  Look again at the anti-virus software, restart your computer in safe mode with network.

  This loads only the basics needed to start your computer while allowing Internet access. Click on your operating system for instructions on how to start in safe mode: Windows 8, Windows 7, Windows Vista, Windows XP, OSX

  Unfortunately, one of the main aspects of the anti-solutions antivirus is that they are almost impossible to actually 'pause' and fail almost exclusively to disable when they say they are and uninstall when you tell them.

• Portege M800 - at startup "Please wait" message remains more than a minute.

  Hello

  I'm French and I bought a laptop Toshiba Portege M800-10v!

  Currently, this pc is great! However, I noticed something disturbing.

  In fact: when you start Windows Vista, I get the message "Please wait", which remains for more than a minute! I found that I was not alone! But I can't find any information on it.

  You know more?

  Thank you.
  PS: Excuse me for my English.

  Hello

  If you have any new laptop and if it is connected to the internet for laptop will automatically download new updates and each of them will be installed after restart. If you should not be worried about it.

  Yesterday I installed some stuff on Satellite P300 friends and I waited about 3 minutes after the first and the second restart. It bothers me, but there is nothing to do. To avoid this problem, I changed the update settings and used the check for updates but let me choose whether to download and install them.

• x 305-q706 Stuck on splash screen where is says "Qosmio" with please wait...

  Hello

  recently purchased a Qosmio x 305-Q706. First time I booted up it gets to start with Qosmio screen displays with "please wait" down and hangs there forever. The only way I can get it to boot is to start cold and purée the key F12 for is loading from the startup screen, if I'm lucky, I can enter the option where you can choose which startup device, and if I manually chose the hard drive I can load windows.

  Someone at - he heard of this problem or how to fix it? I tried to change settings in the BIOS nothing. Re-iterate, it is stuck on the screen with Qosmio pslash, and if I press a key on the keyboard once it says "Please wait...". "he brings me just to the bios: (.)

  Any help would be appreciated.

  Hello

  This is a very stupid situation and I really don't understand why the laptop hangs at this level to start.
  Is somehow your Qosmio confused and cannot decide which device should be the first boot device.
  What is some external device connected to your Qosmio laptop?

  Maybe update the BIOS can help, but if you have all new laptop is not the solution. This is more recent laptop, and I presume that there latest version of the BIOS. So, if I were you I would contact either your dealer and ask for replacement or Toshiba service directly. This behavior is certainly not strange and laptop crashes somehow on the BIOS/POST (Power-On-Self-Test).

• Toshiba 32W3451D (B) - "loading, please wait...". "for 30 minutes +.

  I bought the TV today with a wireless adapter. I connected on my home network before pressing the button "portal." The screen went black and it says "Loading, please wait", he has been like this for more than 30 minutes. I tried to turn it off an on again once.

  Anyone know if this is normal? I have to wait much longer?

  Any news?
  The message has disappeared?

  Before you start solving problems, first of all unplug the TV from the wall outlet, wait about a minute and then reconnect the TV to the wall socket.
  Usually the TV should return to normal operation.

• My laptop is stuck at "Please wait" forever.

  After that almost a week of update of windows 8 to 8.1, when I connect my windows pc slain to a "Please wait" in the start menu forever, there is a Cancel option but it does not work, I can't reach the office, or anything like that.  I picked up the phone once but the problem came again!

  I called the team support and solution soved by the following steps:

  1. connect to the affected account
  2. Press the Windows key + L to lock the computer
  3. Switch to a user who has administrator privileges account
  4. Open the Task Manager and switch to the 'Processes' tab (press 'More details' If a process tab does not appear)
  5. find restoreoptin.exe & end task this process
  6. return to the affected account (Start Page, click on your account/image name, click the account that you want to pass to)
  7. Open the menu of charm (windows key + C), select 'Settings', and then change the settings of PC
  8. Select Skydrive
  9. Change the storage file, Camera Roll, and synchronization parameters (not sure which one that does the trick)
  10. logout and log of refund in
  11. you will be asked is no longer with the blank screen 'Please wait '.

• Satellite Pro U400-130 - "Please wait" is displayed during startup

  I brought a new laptop Satellite Pro U400-130.
  While the l' interrupteur switch on the laptop, each time between the initial screen (vista logo) & the Welcome screen, please wait for t0 60 63 seconds continuous screen is this normal.

  Maybe its waiting for a network connection? Try to disable network devices in Device Manager and reboot.

  Or if you have installed an antivirus program, check that its not not looking for a floppy disk at startup drive.

  Vista event viewer can tell you which delays the startup process.

• HP Pavillion Smart Touch 15: turn on computer, says please wait or AutoFix and then the screen turns white. Goes no further

  My computer was las night. I turned it on this morning and it says the auto repair or please wait a few seconds then screen goes black or white. It doesn't let me do anything else. It is located on a white screen. Help, please

  Hello

  Here's the follow up:

  -You cannot restore your files once the HARD drive goes 'bad '. You can try to start the computer by using a few Linux based Live rescue CD, but chances are very small

  -You can not restore factory default before replacing the HARD drive as the old is defective. You must insert a new and then restore because the information is indeed stored on the HARD drive (new)

  -If you know how and where you can event the same HDD - manufacturer 678312-002

  If this is not the case, just use some as suggested above and as explained in the guide Service and Maitanance.