Popups annoying on second Manager when the display manager is running

Similar Questions

• Keep VI running when the display of pop-up window

  Hello

  I put a button in my program when I click on it and the meesage text appears.

  But when the window opens, the main VI will freeze until I click the OK button on the pop-up window.

  (in the example downloaded, click on the OK button, number will stop adding until I click the OK button on the pop-up window).

  Is it possible to keep the vi running when the display of the popup window?

  Thank you very much!

  Hello

  Hope this link will answer your question. You need develop your own pop up VI and launch dynamically from your main VI.

• Help: Fuze distorts the sound when the display turns off

  Hello

  Since a few days, I own my rocket. Today, I recognized the following problem:

  When the display turns off the "rocket" distorts the song. It's a bit like stuttering, it's his bad.

  When I keep the screen turned on (by clicking on the boxes or more) he playes the song of good quality.

  The EQ is set to standard.

  Has anyone experienced the same problem?

  I don't know what to do, what an individual problem of my camera (default?) or maybe a general problem? I would stay there or should I change it?

  Thanks in advance,

  Stefan

  This problem is fixed in the next firmware should be out in the next few days.

  TO work around it, just put the equalizer settings on the equalizer custom for anything other than 0,0,0,0,0

• I have my InDesign CS6 software crashes when the display of the Welcome screen.

  I have my InDesign CS6 software crashes when the display of the Welcome screen.

  Have you tried to restore your InDesign preferences?

  Garbage, replace, reset or restore the application's preferences

• Why a normal digital text read like a phone number on my site only when the display on the phone or Tablet?

  Hey everybody.

  I'm working on a website and have an ABN followed of the digital text however it does not read as text on a phone or a tablet. In fact, numbers are invisible and when you click it then numbers and calling area is triggered.

  How can I fix this please.

  Help.

  Double post of why a normal digital text reads like a phone number on my site only when the display on the phone or Tablet?

• How to print photos when the display screen is white? The image is missing in it.

  How to print photos when the display screen is blank?  It shows only a white screen empty when I select the photo and press on print.

  You click on a film image in the print module? And, I guess you don't have to go to the Print module, right?  Additionally, make sure that you have chosen to make a custom package.  If you chose the custom package you need to drag and drop images and organize them.

• Trying to update a table in a second table when the data are different

  Hello;
  I have a the same table in two databases. The database are connected with a DB link. I'm trying to update one table based on the data in the second table when the EMP_ID is but the name does not match.
  
  The table will look like:
  Table name: EMP
  EMP_ID
  LAST_NAME
  FIRST NAME
  MIDDLE_INITIAL
  
  My SQL is:

   
  update EMP TARGET 
      set (TARGET.LAST_NAME, TARGET.FIRST_NAME,TARGET.MIDDLE_INITIAL) = ( 
          select SOURCE.LAST_NAME, SOURCE.FIRST_NAME, SOURCE.MIDDLE_INITIAL 
          from EMP@OTHER_DB SOURCE where 
          TARGET.PHYSICIAN_ID = SOURCE.PHYSICIAN_ID 
          and TARGET.LAST_NAME <> SOURCE.LAST_NAME); 

  This refers to a number of update of all lines not the bit I want.
  
  Any help would be great!

  Hello

  Sky13 wrote:
  Hello;
  I have a the same table in two databases. The database are connected with a DB link. I'm trying to update one table based on the data in the second table when the EMP_ID match

  Do you doctor_id?

  but the name does not match.

  The table will look like:
  Table name: EMP
  EMP_ID
  LAST_NAME
  FIRST NAME
  MIDDLE_INITIAL

  My SQL is:

  
  update EMP TARGET
  set (TARGET.LAST_NAME, TARGET.FIRST_NAME,TARGET.MIDDLE_INITIAL) = (
  select SOURCE.LAST_NAME, SOURCE.FIRST_NAME, SOURCE.MIDDLE_INITIAL
  from EMP@OTHER_DB SOURCE where
  TARGET.PHYSICIAN_ID = SOURCE.PHYSICIAN_ID
  and TARGET.LAST_NAME <> SOURCE.LAST_NAME); 
  

  This refers to a number of update of all lines not the bit I want.

  Any help would be great!

  There is no WHERE clause in the UPDATE statement, so that each row in the target table will be changed.
  If you only want to change the lines that have a match in the source table, then add a WHERE clause (perhaps "WHERE EXISTS (...)) with a subquery miuch very similar to the one you already have), or use the MERGER instead of UPDATE.

  If you want to know, post CREATE TABLE and INSERT statements to recreate the tables they existed before the UPDATE and also post the contents of the table changed after the UPDATE.
  Always tell what version of Oracle you are using.

  Maybe you want something like this:
  {code}
  MERGE INTO the emp target
  WITH THE HELP OF)
  SELECT o.emp_id
  o.last_name
  o.last_name
  o.middle_initial
  OF emp@other_db o
  JOIN emp t ON o.emp_id = t.emp_id
  AND o.last_name! = t.last_name
  ) source
  WE (target.emp_id = source.emp_id
  WHEN MATCHED THEN UPDATE
  SET target.last_name = source.last_name
  target.first_name = source.first_name,
  target.middle_initial = source.middle_initial,
  ;
  {code}
  assuming that emp is unique, at least in other_db.

  It will work in Oracle 10 (and more). In Oracle 9, MERGER still requires a WHEN MATCHED clause, so add one if you must. No matter what he does; the subquery USE will only return matches.

  Published by: Frank Kulash, October 10, 2011 16:45

• TRYING TO PLAY THE GAME "PANZER GENERAL 2, WHEN THE GAME STARTS TO RUN THE BROWSER CRASHES.

  Original title: papabob68

  have windows 7-

  I'M PLAYING THE GAME "PANZER GENERAL 2, WHEN THE GAME STARTS TO RUN THE BROWSER CRASHES.

  After that, I have to go to master to stop and start again... I have read all the post I can find and I updated the driver and reset the display and SO ON, SO ON, AND...

  I played this game on windows xp and I have done everything but put A BULLET in it and I think about IT!

  I'd be willing to by a new game made for windows 7 but does...

  MANY OF THE POST TALK ABOUT A 64-BIT SYSTEM, BUT MINED IS A 32-BIT, SO THERE HAS NOT BEEN TWO MANY ANSWERS...

  "HELP!" @!@!

  PAPABOB68

  "I updated the driver and reset the display and SO ON, SO ON, AND ON...". »

  It is better to translate 'SO ON'... to something specific, or you can read suggestions for

  have you tried things once again.

  -Include your brand of processor graphics and model as well.

  -The best place for the hotfixes to vintage games is usually on a specific to this game fan site,

  or the developer forums, but...

  "but mine is 32 bits"

  (Assuming you are using the disk depending on the version of the game.)

  -A 32-bit Windows can be an advantage with some games of this vintage (release date of 97) as

  always use a 16-bit Installer, which will run on 32-bit but not 64-bit of Windows.

  Apart from that, there should be no difference between the OS versions for compatibility.

  -However, prior to version 2000 games (and some newer), may have other

  questions that make them run poorly. Audio and color are two common problems.

  -The camera may result from a problem with earlier versions of Open GL, Direct 3D.

  DirectPlay and Glide3D (gone, but not forgotten) can be a problem sometimes too?

  These questions sometimes have patches on based fan sites.

  -Some 97 games maybe still based back that requires using the window BACK, an emulator "BACK."

  Good old games sells some vintage games with DRM (copy of code protection) removed, and installs

  with BACK box automatically.

  They have Panzer General 2 for $10 USD, but if you expect one of their frequent sales you should be

  able to pick up for US $5-$ or less.

  http://www.Gog.com/

  [ EDIT: just watched add it, and it seems to be a DirectX game 9] It must have been updated DX9

  for the downloadable version.

  It can been Direct3D when released.  DX 9 was not released before 2002

  -All on the theme of DirectX. If you have not updated DirectX, you should do it.

  Win7 is not the most recent DX 9, 10 or 11 files when first installed.

  Download installer Web Runtime DirectX end-user of the official Microsoft Download Center ]     

  -You can also use D-Fend Reloaded, which is a user interface that reduces the learning curve for the DOS window.

  The download includes the box and a few BACK based games start practicing.

  D - Fend Reloaded: overview

  Finally, and above all by an effort... An important announcement for all users of the disk based games.

  -A new (since Win10) problems with the old disk based games comes from malicious software developed by MS - DRM blocking.

  If your disc games has a file called - secdrv.sys - on it, the game will be blocked by a

  Windows 'security update' - KB3086255-.

  I have more information about the blocking of the DRM, including how to work around this - here -

  .

• Do not display the context menu set when the display manager

  Hello gurus,

  I m having this error during disconnection:

  Error 404 - not found

  Of RFC 2068 Hypertext Transfer Protocol - HTTP/1.1: 10.4.5 404 not found Server not found anything matching the request URI. No indication is given whether the condition is temporary or permanent. If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.

  When is a declare a view in faces-config Manager. XML accordingly with the tutorial: https://technology.amis.nl/2012/08/11/supporting-multiple-languages-in-adf-applications-backed-by-resource-bundles-and-p...

  I have a stark call to a message in a pop-up window which is showned when I clicked on the modelled Logout button

  

  If I Don t declare the display manager, it works (the popup is showned and redirects to the login page).

  If I Don t display the context menu, it works (redirects to the login page).

  by no reason i Don t know, they are incompatible, but I need them working.

  JDev 12.1.3.0.0

  any ideas guys?

  Thank you

  Angela

  Hello

  I ve just erased the action button (goToLogout), and it worked fine. A didn t of controlFlowCase there were more (goToLogout).

  action = "goToLogout" actionListener = "#{LoginBean.doLogout}" targetFrame = "_self" / > "

  action listener (LoginBean.doLogout) shows the pop-up message.

  the dialogListener in the context menu when you click yesButton call the invalidate session and redirects to login page programaticaly.

  It was rubbish in my code.

  KDario thanks for your help, but you could never predict that in my code.

• Running query when the display changes of value of box

  Hello everyone, I have a little problem. In my form, I have 2 rematch, the first will contain only a display element that is filled with a lov when a user presses a button. The second poster datablock a list of items that should be queried depends on the value of the LOV above. What I thought I could do are on a trigger after change of the displayed element is:
  
  go_block ('block_name');
  do_key ('execute_query');
  
  However, I am told that I can't do these in a trigger of change, someone would have suggestions on how to get what I'm looking for. I should maybe create my own trigger somehow or is their most simple way.
  
  Thank you
  
  
  
  
  
  
  
  
  
  
  I have 1 datablock consisting of 1 single view point which is filled when a user presses a button that displays in turn a LOV for the user to select a value of. When the value of the displayed item changes,
  
  Published by: 786733 on August 24, 2010 01:28

  Hello

  Try to use the KEY-LISTVAL trigger in the element where the lov is attached. Something like that...

  LIST_VALUES;
  IF :item_name IS NOT NULL THEN  -- Here item_name is where the LOV will return value.
    GO_BLOCK('block_name');
    EXECUTE_QUERY;
  END IF;
  

  -Clément

• What should I do when the display shows "at the service of the user could not connect. Unable to load the user profile... ?

  I connect to my profile and I am not able to log in. The display shows "at the service of the user could not connect. User profile cannot be loaded... » » ?

  Hello

  These methods should help for Windows 7 or Vista.

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  -------------------------------------------------------------------------------------------------------------------------------------

  For Windows 7:

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  -------------------------------------------------------------------------------------------------------------------------------------

  For Vista:
  
  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  How to create a Vista - free methods recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  -------------------------------------------------------------------------------------------------------------------------------------

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Defragmentation stops when the display is off

  I recently used the Disk Defragmenter to defragment my hard drive.  After reviewing the forums I discovered that it does not work when the computer goes to sleep so I took care of the mode "Eve".  However, my computer is always programmed to turn off the display after 10 minutes.  As the defragmentation. can take several hours, I didn't leave the screen while he was doing his job.  However, when I returned to the computer during the process and reactive the display, he did not know if the defragmentation. given market or extended.  I would not have thought that the display off should interrupt the defragmentation. but I would appreciate clarification on this point.

  Hello

  If the screen saver is on, Defrag will still work in the background.

  There is no need to do what you do.

  I think you should read this about Defrag in Vista and you don't have to do it manually.

  The Vista defrag works quietly in the background without intervention on your part

  http://support.Microsoft.com/kb/942092

  In Windows Vista, there are a lot of improvements in the defrag engine and handling of fragmentation. By default, Windows Vista uses Task Scheduler to automatically keep the defragmented hard drive. This Automatic defragmentation does not affect the performance of the Windows Vista operating system...

  If you want to use a much better defragmentation program which is free and where you can see the results, I suggest this one:

  http://www.Auslogics.com/en/software/disk-defrag/

  See you soon.

• Windows media center (vista) makes a gurgling noise in speakers when the display is active.

  Buzzing noise disappears in WMC is reduced to the minimum. In addition, no noise present during the use and display of windows media player or any other application. Only when WMC is displayed. All other inputs and outputs (line, microphone, etc.) are set to 0 and muted. Buzzing noise is not loud, but are noticeable between tracks, or when the song is paused. Noise does not increase or decrease with volume changes.

  Hello

  I suggest you follow the steps below.
  Try to install the latest driver for your soundcard for computer/card mother/sound card provider and check if that helps.
   
  For your reference: updating a hardware driver that is not working properly.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  I hope this information is useful.

• Windows 8 Crash when the display is off

  I recently bought a HP with Windows 8.  I have 2 HP monitors.  When I select the power plan settings to have the display stops after a certain amount of time, windows stops and restarts my computer every time after that the monitors are automatically disabled.  I checked two monitors drivers and the system tells me that I have the latest drivers.  I chose a white screen saver in the meantime, but it is not turn the monitor off (no problem when I return to the computer after the screen saver running on empty).  When I choose 'Never' to turn off the display, I don't have a problem when I return to the computer (the computer has been sleep based on power settings).  I only have the problem when the monitor is turned off automatically according to the parameters of energy.  Any advice on how to fix?

  I've updated to 8.1 Windows and the problem seems to be resolved.   Thank you for your help.

• Portege M400: when the display updated drivers will be released

  I found quite a few bugs that appear to be associated with the display as the screen turned off driver and not coming back not upward and intel has a MUCH more recent display on his site driver so my question is Walker will be communicated to toshiba a new display driver for the m400 as the current one is pathetic because it is too buggy!

  I put t know what you expect, because on the Toshiba driver page I found a new display driver. The latest version at this time was 08/02/06. To me, this looks like a very recent version. I recommend you to check the drivers available on the Toshiba page first.