Port before turning off wi - fi on Linksys WRT1900AC

Similar Questions

• Why has my laptop started to randomly stop before turning off

  Original title: computer power questions

  Why has my laptop started to randomly stop before turning off? I had no problem with this computer at all for more than a year. I tried to run all the updates available, but of course, it turned off before she finished. Sometimes it will run fine then others that it is a nightmare. can anyone help please? I would be very happy to help!

  Hello

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
  It is just like it loses power or stop it in the normal way?

  Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
  in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
  air vents. Check that fans are working (before and after opening the case). When your laptop on all the
  You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
  test).

  This sounds like material so if the above does not help you then probably need the help of a
  real computer store (not of leeks and glances at a Best Buy or other department stores) or the system
  Support from the manufacturer.

  ===========================================================

  Check with these utilities to see if information may be collected: BlueScreenView run to see if
  There were some BlueScreens and MyEventViewer at the time, check if the stop (or a little
  seconds before) see the event log contains useful information.

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  ------------------------------

  Also do this so you can see the probable bluescreens. (You may or may not be able to see
  them if they occur even after doing this according to the cause.)

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  =========================================

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  =========================================
  =========================================

  More if needed and you think that the closure could related to the Options of food or sleep.

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I replaced my hard drive and format my computer before turning off the software PS.  It need my code series now, but I had lost.  How can I solve the problem and use the software again?

  I replaced my hard drive and format my computer before turning off the software PS.  It need my code series now, but I had lost.

  How can I solve the problem and use the software again?

  If you use a perpetual Photoshop and formatted your disc version of starting without disabling your activation of Photoshop, you also Adobe supports help you activate Photoshop once you retrieve your serial number.  The startup disk formatting would destroy that credential of Activation Photoshop machine which is registered in the database of the Adobe activation server. Which reduces the activation numbers you have to use.  If you have Photoshop installed on a second computer that means that you have no free activation available as well, even with your key you can't activated the machine.

• Hardware/OS changed before turning off, I can not install Ps e Lr

  Hardware/OS changed before turning off, I can not install ps and lr again on my second computer how can I fix it?

  Thanks in advance

  You can contact the Support from Adobe if you have difficulties to enable the publication to your computer.

  The links below may also help:

  FAQ: Can I reinstall cloud Creative if I get a new computer, my computer dies, or I have to reformat my drive?

  FAQ: How can I reset my activations?

  FAQ: How to contact Adobe for support?

• Change selectBooleanCheckbox before turning off

  Using JDeveloper 11.1.1.3
  
  I have a JSPX with some selectOneBooleans on it. I also have a selectOneChoice. Given the value selected from the selectOneChoice, checkboxes should be disabled. Before turning off, I need to deselect them.
  
  All boxes have a partialTrigger to the selectOneChoise.
  This is the code I use in the valueChangeListener
  

      public void valueChange(ValueChangeEvent e) 
      {
          System.out.println("Setting new values");
          if(e.getNewValue() != null){
            PlantType type = (PlantType)e.getNewValue();
            if(type.getCode().equals("PLANT")) {
              plant.setIsWild(false);
              plant.setIsCultivated(false);
              plant.setIsList1(false);
              plant.setIsList3(false);
              chkWild.setDisabled(true);
              chkCultivated.setDisabled(true);
              chkList1.setDisabled(false);
              chkList3.setDisabled(false);
              
            }
            else if(type.getCode().equals("FUNGUS")){
              plant.setIsList3(false);
              chkList3.setDisabled(true);
              plant.setIsListedAsterisk(false);
              chkAsterisk.setDisabled(true);
              chkWild.setDisabled(false);
              chkCultivated.setDisabled(false);
              plant.setIsWild(false);
              plant.setIsCultivated(false);
              plant.setIsList1(false);
              chkList1.setDisabled(false);
              
            }
        }        
      }

  An example of a checkbox control:

  <af:selectBooleanCheckbox id="wild"
          text="#{bundle.plant_wild}"
         value="#{pageFlowScope.plantBackingBean.plant.isWild}"
         binding="#{pageFlowScope.plantBackingBean.chkWild}"
         partialTriggers="plantype"/>

  This is what is happening in the UI:
  When I select all the boxes and move from fungus to plant, disabled checkboxes keep activated.
  When I change of BOF plant to fungus, they are unchecked.
  
  I'm doing something wrong here?
  I also added a few exit my plants and my grain of support to find out when the getters and setters are called:
  
  When I change from fungus to plant, it is the output:
  Definition of new values
  Raging boolean
  Raging boolean
  
  I get the same when I go from plant to fungus so I do not know that the EL really returns the correct value for the checkbox control.
  Maybe this could be a problem because I turn off the box and therefore does not allow the change of the user interface or something like that?
  
  How can I solve this problem?

  If immediate = "true" = "true" autoSubmit is set to the SelectOneChoice it is a partial trigger for the boxes, and then set immediate = "true" on the checkboxes too, if phase JSF "Update Model" would be ignored of the boxes.

  Dimitar

• Power down, windows 7 sets the Verr Num led on just before turning off

  I have a Fujitsu 101/102 PS/2 keyboard connected on a 64-bit windows system 7.

  Recently, my motherboard has failed, and I installed a new motherboard, where I had to do some basic recovery for windows 7 to come.
  Because then I find that when I turned off the system, during the eve of the sequence, when I get the screen power off mode, the indicator (Led) NumLock on the keyboard is turned off first, and then just before that the system turns off the Num Lock Led is lit once again and of course remains on until I then use my PC.
  I would like to get a solution to this problem.

  The State of the Num Lock is determined by the BIOS during POST (Power On Self Test). It is not defined by Microsoft during the power down, but the BIOS of your computer can trigger the light briefly during a stop.

  If you enter the BIOS of your computer during the power upward (F4 maybe?), you should be able to find a framework that governs the State of the NumLock at startup. Change this option to what you want and save your output settings.
  The BIOS settings are retained by EPROM chips on your motherboard, which explains why things have changed with a new motherboard.

• New Toshiba wireless turns off the Internet (by Linksys WRT110)

  I "ORDERED" a new Toshiba A660 (custom) yesterday. We have a DSL with Motorola modem and Cisco Linksys WRT110 router with a Cat5 connection.  For a brief period the Toshiba could access the Internet through the radio (I registered the computer and the Norton AntiVirus). Subsequently, I have 'enabled' or authorized the self-install Toshiba Bluetooth (built in, but, it seems, are not not in Device Manager).

  Before the afternoon was over, I found that the Toshiba, with WiFi antenna 'on' effectively killed my Internet connection.  My Dell, which has been wired through the Cisco could not access the Internet; my Mac which works wirelessly, could not access the Internet.  When I turn antenna Toshiba wireless Internet access on the other two computers is restored within 45-60 seconds. This situation persisted after a 'Factory restore' procedure this morning, where the Toshiba killed our Internet access during or shortly after the part "desktop configuration" of restoring an hour.

  Another call to and recall, Toshiba technical support gave rise to suggestions 1) I want to see if my computer breaks down someone of another Internet connection and 2) it must be Cisco.

  The Toshiba behaves itself when it is connected to the Cisco via Cat5 (as long as the wireless antenna is not enabled).

  For example, Cisco, do I need an upgrade of the router to prevent the Toshiba to kill my Internet connection?

  Pat (and James)

  If your new computer is running windows 7, disable IPv6 under two adapters Wi-wired and LAN properties.  Restart the computer and you connect again.

• Satellite A110-179: Vodafone 3 G internet card - port are turned off

  Hi all! I need help.

  See, I bought a Vodafone 3G internet card. It has instaled already, but the port of the computer seems to be disabled.

  How can I turn it on? I already have gonne in Control Panel and information I received from there is 100% operational. Someone help please...

  My model is the A110-179

  Thank you...

  What are the ports do you mean exactly?

• A30 - 714 overheating? before turning off.

  Hi, my A30 714 is just over a year, and a couple of months he began to turn itself, maybe due to overheating. It can happen at any time, no similar applications, which can be general purpose, watch DVDs, or burning CD someone can help?

  Hello

  Check this http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=2581

  Good bye

• Satellite Pro L650 turns off after start; DC In and Power LEDs blink on stop

  A friend Satellite Pro L650 having worked well until yesterday, all of a sudden turned itself off. Now, at startup, it lights up normally for about 10-15 seconds before turning off suddenly. Turned off, the DC in white/blue LED and the orange Power LED Flash on a broad set of intervals of approximately one second. This extinction happens if I leave Windows or press F2 to enter the BIOS setup.

  I guess this blinking is intended to serve as a kind of diagnostic code, but I have yet to track down what it means. Can anyone help?

  To avoid confusion, power without the product stack the same, sudden stop experience, except the two LEDs remain solidly lit this time. With or without battery, trying to turn on again immediately after that a shutdown produced no response at all. Remove the power cable and immediately it reconnect again and turn then produced a brutal power off, but in less than 5 seconds. More wait between attempts to market seems to give a little longer powered on State, but without fault, the machine turns off just suddenly. With its short time 'turned on' we are talking, there cannot be any kind of thermal protection?

  I had an old Satellite L450D lying around that uses coincidentally the same AC PA-1750 adapter, but use it made no difference. Of course, the battery does not have the L650!

  The only previous numbers, that I am aware of this machine have been intermittent case of Windows reporting "Plugged in, not charging", but as my friend use it exclusively on the network, it was not a problem.

  Your thoughts will be greatly appreciated...

  WTF?

  What is an unmoderated forum?

  Can someone help with my problem?

• Journe Air 810 turn off

  I had one of these years and recently has been to play with the settings (Yes, silly me!). I put the car at 08:00 and automatic stop at 22:00, but it turns any now!

  I tried to use the reset on the back of the frame, but it just shuts off and turns on then again very briefly. It does not even reach the homepage before turning off. It is connected to the power grid for hours is not the battery.

  I am pulling my hair and can't even find a manual online! Can anyone help please?

  Thank you very much

  Louise

  Hello

  > Impossible even to find a manual online! Can anyone help please?
  The manual can be downloaded from Toshiba Web site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download user manual

  Maybe you can find useful information. ;)

  If not, ask a maintainer agreed to help. Guys need to know what to do now.

• HP Pavillion G6: hp will continually turn off but cpu 48 - 49 c temp

  Help, please! I love and need my laptop! I have a Pavillion G6-2200.  In December I started having overheating problems. I was able to clean a very dirty fan and for the last three months, that it worked perfectly, well except that I couldn't use my wireless. Then on Friday he just stopped. I could not turn it back on for several hours and then it turns off again. I cleaned and replaced the thermal paste on the heat sync. I cleaned the fan and low load cpuid. Now I can turn it on and it will work for about 10 minutes before his arrest. It turns but obly after I remove and replace the battery.  Here is a screenshot of the newspaper of cpuid. Any help would be greatly appreciated.  Thanks in advance.

  

  Hi @Calipurp,
  
  Welcome to the Forums of HP Support!  I understand that you have a problem with the computer overheating before turning off. I'll be happy to help you.

  Please follow all the steps of reduce the heat inside the PC to prevent overheating and laptops HP-HP CoolSense technology.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• When I turn off a Dell ESXi 710 guests and Compellent SC8000

  I get emails from the controllers saying Compellent connectivity is lost.

  I just need to check the box "don't show alerts when connectivity to the server is lost" before turning off the server to stop these messages for this period?

  See you soon,.

  Bilal

  Well Yes, that's all!

  It will keep the setting if you do not need to do each time (even if you can it in case you place a server HBA or something).

• Cannot use Wake on LAN, unless that "allow this computer to turn off the device to save power" is checked

  Wake on LAN - power management

  On my Media Center PC, I am unable to use Wake on LAN unless "allow this computer to turn off the device to save power" is checked (in the tab power management of the adapter in the Device Manager). "Allow this device to wake the computer" and 'Allow only a magic packet wake the computer' is checked, but become grayed out when "allow this computer to turn off the device...". ' is not checked.

  The problem is, Wake On Lan doesn't work unless the computer has been asleep for a short period of time. If I try to activate the computer using WOL after about 10 minutes, he never wake. I guess that's because "Allow this computer to turn off the device to save power" is checked, the machine is before turning off the network adapter.

  Is it possible to force the computer to disable the NETWORK card, but would retain the capability of WOL? Or ensure you THAT WOL works little regardless of how long the PC has been asleep?

  The machine is a Windows 7 PC with a Nvidia nforce network controller.

  By the way, I have a laptop on the same cable network that has all three items checked in the tab for its NIC device power management, and this machine can be awake at all times using WOL, regardless of how long he has been asleep, this issue must therefore be with the configuration of the Media Center computer.

  I would be really grateful for any suggestion, I spent a lot of time trying to get this to work!

  See you soon

  Hello

  If the systems are only a sleep you don't need a magic packet.

  If computers are set to wake on any network traffic all Ping or arp will wake them up.

  For this configuration, it is best to disable the saving of NIC.

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  ----------------------------------

  Real means WOL shut down a computer on Hibernate real position, http://www.ezlan.net/WOL.html

  However as these has involved the PSU cooperation. Motherboard. Network card and are not considered critical by the industry for the user end is a YMMV situation.

  12 Desktop who are under my immediate control (mix and match brands and processors). Only three are fully compliant and properly awake.

  Three satisfied partially, the rest don't care my desires/needs of Wake on LAN.

  On the positive side, since it is now fashionable to go green, the percentage of new computers that keep the better sleep habits significantly improved.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Backup cancelled in Windows 7 when the computer is turned off.

  I use Windows 7 Home Premium 64-bit operating system.

  Periodically, the Action Center will display a message saying that I have to do a backup, what I do before turning off the computer. However, when I reboot the computer, I discovered that the backup has been cancelled.

  I have searched the web but can't find information about how to make the computer shuts down automatically once the backup completed successfully.  Does anyone have a solution?

  The backup has been working in the past?

  Have you ever attempted an upgrade to Windows 10 and then back to Windows 7?

  For example let's say you have your backup scheduled task to run at midnight...

  If your computer is stopped at midnight, the backup does not - because the computer is stopped and the task was "missed" because the computer has been shut down.

  If you have the backup task configured on "Run as soon as possible after a regular departure was missed":

  

  When your computer working again missed backup task starts automatically.

  If you have your scheduled backup job to run at midnight and your computer is in "Sleep" mode, you have the task configured to wake the computer to run the backup:

  

  This won't work for wake up the computer if it is in "Sleep" mode  It will not work if the computer is in hibernation or if the computer is shut down.  As you can be awakened from sleep, the computer can be awakened from sleep, but you can't be awake if you're dead (stop).  You have to sleep to being awake.  You can be awake if you're dead or hibernation.

  The 'problem' with this approach is if the computer wakes up and runs the backup it will continue to function and you don't want that.   You can the computer to wake up, run the backup, and then click Stop (or to go back to sleep) when the backup is complete, and you can configure to occur in two different ways.  If that's how you think you want things to work ask the question in the right way, and describe how you want things to work.

  If your computer is in hibernation or stop the scheduled backup will not work until the computer working again and realizes that he has missed a task... then the backup will run - if you have the task set to do as the first example.

  Depending on certain factors that have nothing to do with Windows there are ways to make your computer start at a certain time of the hibernation or shutdown (mean 23:55) so it will be quick and then the backup will take place at midnight but will continue to operate your computer unless you include an additional step to stop the system again when the backup is complete.  These things are not exactly automatically built into Windows, but there might be ways to do things the way it works.  If that's how you think you want things to work ask the question in the right way, and describe how you want things to work.

  Find how to solve is often a matter of the question or stating the problem clearly there is no guess, no things difficult and none of these proceedings of the wild goose.

  What is the problem with the way your backup works now?

  What part doesn't work the way you think it should work?

  How do you think this should work?

  How it works?

  If your computer is turned off (off) do you want that it to wake up itself, run the backup and then stop when the backup he fill?  You can do it if you want, but it takes an extra effort and has a few requirements outside the Windows operating system.

  The task of the example above is set to run every Monday at 09:00.

  If my computer is running at 09:00 on Monday, the backup will start and run Monday at 09:00.

  If my computer doesn't work at 09:00 on Monday, the backup will run as soon as possible after the computer restart us and that's fine with me.

  I do not use sleep or Hibernate so I don't have to worry about how get the copy backup to run under these conditions.