Port COM3 modem problem

Similar Questions

• Satellite A30 Com3 (modem port) does not

  My port Com3, such as used by Toshiba softmodem, is nowhere to be seen, is not listed in device drivers and cannot be recognized by hyperterminal. There is an entry in the hidden device drivers where it was yellow triangular. I disabled it, but he wouldn't reactivate. There are entries in the registry for it. I've updated the BIOS.

  If I try the softmodem I get message 633 port already in use or not properly configured. My suspicion is that the port was blown by power surge on the phone line. Anyway I can test it before sliding off the coast on a service partner? Thank you

  Hello

  Check the documents of Microsoft:
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;324760
  http://support.Microsoft.com/default.aspx?scid=http://support.Microsoft.com:80/support/kb/articles/q191/4/44.asp&NoWebContent=1

  Maybe you will find useful information here.

  Good bye

• Satellite Pro M30 modem problem

  I have a portable Satellite Pro M30 and I try to install the modem driver. Everything is ok, but the modem has problem. In Device Manager, it seems to be fine without conflicts. Each time than trying to query the modem of the property page, it shows me a message concerning the opening of port.

  I read a lot of articles and I thing the problem, this is the version of the driver. The driver that I use is the SM2138ALD04 version. Have any ideas?

  Hello

  I agree with you, I found also several threads to have reported similar problems with modems
  No doubt this procedure will help you:

  -go to the Device Manager and remove and uninstall the modem driver
  -Download the latest modem driver
  -restart the OS and reinstall the modem

  Please report did it

• A30 Modem problem, any ideas?

  My A30 won't let me use the softmodem AMR. I get error 000005aa, the port is used by another device. There is no error in the Device Manager, it indicates that the modem is enabled and Ok no conflicts, but when the modem is queried using the diagnostics or attempt to dial a number I get the error.

  I checked the BIOS for all the other conflicts, th disabled using IRQ7 lpt port.

  Resources show the modem as
  PCI modem on Com3, Bus PCI device) 31 6 function

  Retro Hi

  If you have reinstalled your unit with recovery CD, it should work unless there is a modem failure. Sorry but I have no other explanation.

• Satellite P20 - Modem problem

  Hello
  My client has a portable P20. He opened a virus that caused having to reinstall the OS, we're back to the same problem that we had initially. The modem will dial my mobile using dial up networking, but it runs the software of Royal Bank Of Scotland, during the installation of the software, the installation crashes that it cannot find the COM port.

  Before reinstalling the OS, I made a backup of its Royline software, I have the copied on top, executing it says that it cannot find the COM port. When this happened the last time that the device is returned to Toshiba and came back to work but no explanation, so cannot address to currently. I have stopped in regedit software that listens to a call but has not fixed the problem.
  If anyone has a solution I would be grateful.

  Hello Stuart

  You will be very happy if someone has experience with the software mentioned. The fact is that you should test the tethering without third party software part. If the modem works the operation of the equipment is proven.

  By the use of some software support for laptop and stops leaders and you can contact support for software producers. They have enough experience with own products and I assume that they tested correctly.

  Because of this, I think that Toshiba is absolutely wrong address.

  Good bye

• port WRT350N transmission problem

  Setup

  Modem ZyXel 660: 192.168.2.1

  DHCP at startup IP 192.168.2.2

  NAT - all ports forwarded to 192.168.2.2

  Linksys: 192.168.1.1

  DHCP at startup IP 192.168.1.100

  DHCP table:

  Office wired IP: 192.168.1.100

  Xbox wired IP: 192.168.1.101

  Laptop1 IP Wireless: 192.168.1.102

  Laptop2 IP Wireless: 192.168.1.103

  I have IIS works great on the desktop and in the future the two laptops.

  Ive tried from outside the local network, and I can connect the destop and all ports associated with IIS and other apps (RealVNC).

  I can see the site on the computer running IIS, but cannot on any other computer in the local network by using its IP address in the address bar http://192.168.1.103:86 /, or its network name, http://laptop:86 /. So of course it doesn't work outside of the network either.

  I have all the correct ports forwarded to the correct LAN IP. I even tried other ports in the thought of port conflicts. STIL no joy.

  port 81 is Office IIS

  Port 86 is laptop2 IIS

  Any thoughts as to what im doing wrong?

  Surely works of port forwarding for wireless connections, right?

  Problem solved, the problem was with the laptop.  Stupid windows firewall activated, some how. Funny thing is that even the security has been settled yet on unguarded.  I do it just after I turn it off, always. So I know I turned it off once before.

• Satellite L300 - 1 year PSLBGE - device Modem problem

  Hey

  I try me set up my dial-up access, so I can use internet at home...
  It is said that any modem devices are
  but in the previous copy of windows that I had... everything was fine.
  would u please help me solve this problem?

  Portable computer system unit Toshiba satellite L300 1 year
  Model No.: PSLBGE-002004AR
  OS: Windows XP
  Note: I went on the site of toshiba drivers and I downloaded 3 files of modems here to try to update the modem driver
  but nothing helps and the problem persists
  Thanks for reading
  Your
  ~ Nour

  I guess that you have activated the Device Manager and there is no yellow exclamation point isn't good?
  Figure modem in the list?
  It should be!

  How have you tried to configure the dial-up access?
  You should do this;
  Go to the category modems Options - Control Panel - hardware and sound - and.
  In the local info window, select an area code; for example, 0.
  Then click the Modems tab, click Add.
  If a User Account Control warning window appears, click on continue, and then click Next.
  Now Windows Vista should attempt to detect the modem.
  When the modem installation is complete, click Finish.

  Then the new modem installed should appear. Click OK to close the Options of Modem and telephony.
  Now, your modem is installed correctly, and you must now create a modem connection.

• A300D-14 t modem problem

  I change my version vista Home Italian English version, but my toshiba sat. A300D-14 t does not recognize the modem hdaudio and does not install the driver from toshiba site could someone help me to solve this problem the solution pls.

  XP or Vista?

  If its XP:

  http://support.Microsoft.com/kb/888111
  http://support.Microsoft.com/kb/835221

• Installation of modem problem!

  Hello

  I reinstall new OS, when I try to install a modem with the last pilot devices returned with error (yellow mark).
  I read in the forum and knowledge of the internet. The problem is a regfile, this file is located in the cd driver sound tools.
  I wait in a directory on the cd, but I can't find it.
  Can someone help my!

  Hello

  It would be easier for the community to know what laptop you have? What old and new operating system you have?

  Where is the driver for the Modem of Toshiba Homepage or Tools & Utilities CD?

  :-)

  Bye Bob

• Port of modem 7010CT Portege?

  The 7010 ct built in modem?
  If Yes, where is the interface.
  If this isn't the case, I guess I have to buy one and it fit in slot 0 or 1 on the left side. Assume that they are all compatible?
  Thank you

  Hello

  I found the information that your device has no internal modem. You're right about option PCMCIA. I put t think that there should be no problem using the PCMCIA.

  Good luck!

• Satellite A30 - Modem problem

  I rebuilt my A30. I reinstalled the modem drivers from the CD-ROM supplied with the computer. I use XP Pro. However, I get the following message: 21/12/2005 23:24:47.890 - file: C:\WINDOWS\system32\tapisrv.dll, Version 5.1.2600
  21/12/2005 23:24:47.890 - file: C:\WINDOWS\system32\unimdm.tsp, Version 5.1.2600
  21/12/2005 23:24:47.890 - file: C:\WINDOWS\system32\unimdmat.dll, Version 5.1.2600
  21/12/2005 23:24:47.890 - file: C:\WINDOWS\system32\uniplat.dll, Version 5.1.2600
  21/12/2005 23:24:47.890 - file: C:\WINDOWS\system32\drivers\modem.sys, Version 5.1.2600
  21/12/2005 23:24:47.890 - file: C:\WINDOWS\system32\modemui.dll, Version 5.1.2600
  21/12/2005 23:24:47.890 - file: C:\WINDOWS\system32\mdminst.dll, Version 5.1.2600
  21/12/2005 23:24:47.890 - Modem type: TOSHIBA software Modem
  2005-12-21 23:24:47.890 - the Modem inf path: oem7.inf
  21/12/2005 23:24:47.890 - Modem inf section: ATI_AMR. Modem
  21/12/2005 23:24:47.890 - matching hardware ID: pci\ven_1002 & dev_434d & subsys_00011179
  23:24:47.968 21/12/2005 - opening the modem device failed with error 000005aa

  Any help would be appreciated

  Hello

  Where did you get this message?
  Have you checked the Device Manager? You see errors like yellow exclamation?
  Please post more information about this problem

  Good bye

• Satellite 1800 - modem problem

  I have a dial connection whenever I try to connect to the internet, I get an error message saying that the remote computer has failed.

  I XP MS and connection to the internet has always been a bit hit and Miss. Impossible with aol, fine with BT I now live somewhere with blue cable installed there and have had problems since.

  I tried a virus with a startup disk check - nothing. I uninstalled the driver and reinstalled the latest version. I'm trying to get hold of an external modem to check if my modem. I don't really know about these things, but certainly a modem no longer works or it's not - there is not between the two? After you have reinstalled the driver that I managed to connect, but has been disconnected aftre about 20 minutes and have not been able to connect from. I'm out of ideas. Can anyone help?

  Thank you in advance.

  Hello Madeline

  As you know, it is not easy to give you all the help on this path. First of all it is important to make sure that your modem is operational. Your ad the modem functionality is not connection just problem to your ISP (Internet Service Provider).
  Am I wrong?

  Can you please test your modem and check the results. You will find in the properties of the modem under Diagnostics.
  The only thing I can recommend is to remove the modem from Device Manager and dial-up connection. Restart the device and the modem will be detected again. Create the new connection dial-up and pay attention to all parameters.

• Modem problem: "no dial tone".

  Hi all

  Can someone explain how to get my email from my lap top messages when away on holiday (in the United Kingdom)? At home I'm on freeserve hometime - evenings and week ends option. While he died this week, I tried to connect through aol broadband, when it obviously failed I have not connected to the telephone without broadband dsl thingy, I always get the error message 'no dial tone '. If anyone has had this problem and you solve?
  Thanks, Jackie

  Sorry, but I can´t follow you! ;(

  Want to know if you can take your vacation mail, for example in Webmail or something else.

  Or do you have the probs to get your Modem running?

• A30 modem problem

  Hi, I can not install xp driver of modem to my computer. It does not accept driver xp so I installed driver win2000, but now there is an error: modem does not answer. In Device Manager, but no problem... What can I do?

  Check the settings of the modem - it probably should be for the Tosh software modem, not the material or the IR. Also, make sure that it is configured to receive. With my old computer, I could not put to send * and * receive, should therefore continue to change the settings via the control panel.

• Satellite SP20-604: Modem problem

  Hi, I have big ploblem with my satellite and its modem, I instaled Windows XP home SP2, wheen, I try to connect to the internet, the modem answers "modem port used by another device, please check the device... Manager mpla mpla..." MPLA... I try to download new drivers, but nothing of steel, I try to delete the instalation, reboot and install again but I get the same error. Please help me, give me an idea.

  Hello Stratos,

  SP2 includes the Microsoft Firewall. This can be configured to block incoming access, unless you have specifically authorized your ISP on an exceptional basis. Assuming that you also use an antivirus product I suggest disabling your firewall temporarily (from the center of security in Control Panel) and then trying again your dial-up. If this succeeds, then you will need details of your ISP and put them in the list of exceptions in the firewall so that they will not be blocked in the future.

  HTH