Port Forward question e4200

Similar Questions

• I want to get the best on my router (Port Forward questions)

  I use the WRT54G2 router and the wmp54G. I'm trying to get games like America's army and Team Fortress 2 to work properly. I've assigned my static Ip pc using the guide portforward. I forwarded the necessary ports.

  I can't connect to my account on the U.S. military, and I can not connect to servers on Team Fortress 2. I tried to disable my anti-virus and firewall but still no luck. I'm doing it on the pc with the wireless connection.

  Any suggestions?

  I also have another question: when transmitting ports or using DMZ, what IP address I send? The pc connected directly to the router or the pc which is using ports (one wireless)?

  BTW, MY ISP is Comcast

  In most cases, you can use the DNS proxy server that is built into the router at 192.168.1.1 (address by default), but in your case would be in 192.168.2.1

  It is preferable to use the DNS proxy server.  The router keeps track of the actual Internet DNS server addresses from your ISP and transfers data to the appropriate DNS server.

  If the DNS server of the router proxy does not work, then enter your true Internet DNS server address in your computer.

  In addition, I see that you use the et.102 adresses.101 in your computers.  Your range of DHCP servers by default est.100 thru.149, so unless you have changed it, you use illegal LAN IP fixed addresses in your computer.  This could be the cause of your problems.  Note that all fixed LAN IP addresses should be outside your range of DHCP server.

• E4200 Port forwarding

  I would like to open a couple of ports in an E4200.

  The only option I can find is in the game.  Can I port before a single port as 3389 to a system on the local network, and it works.

  The problem is that port 3389 is open on the world now since I can't find a way to only allow traffic on port 3389 from a specific static ip address.

  It is a big security problem for me.  I want only the traffic on port 3389 of specific static.

  I also noticed that you can't say different two before port 1433 from a static IP address.

  I hope that LInksys has a way to do it, or it's really a porrly even designed device for residential users

  You can not normally port forward to two or more IP addresses. I've heard some router but can it would be an effect of Robin.

  Yes with the firmware on this router Linksys is impossible to specify an external IP address in the port rule forwards. You can change the external port to something, no standard as 10001 and have internal port 3389. The specify the port and the Address\DNS IP in the computer text box office remotely. Ex: my - distance - ip:10001

  This will only cause confusion, but perhaps that's pretty and your server security settings is always the final measure.

• Question about port forwarding WRTU54G-TM

  I suddenly have problems with port forwarding on my WRTU54G router. I try to open port 3389 for remote access. I to the departure port 3389, 3389 to port to end, and when I press on save I get an error message that says "start port can not be smaller than the ending port!

  Besides, I have one bunch of other ports that I did a long time ago, and now he is giving me the same error message when I try to save those still. I never had this problem before. Any ideas? I double checked a million times, the start port is certainly not smaller than the port of end on one of my entries.

  Thank you!

  I have has nothing to do with it. I have since deleted all other ports transferred (I got 88 and 3074 open for xbox live) and now I can not enter something, I get the same error message. Maybe some sort of bug in my firmware? I'll try the upgrade again.

  * UPDATE *.

  I reinstalled thefirmware and the problem is solved.

• Question about WRT54G2 and port forwarding

  Recently, I replaced my WRT54G with a new WRT54G2. My old router had the port forwarding for 2 pc is as follows:

  192.168.1.100

  6073 - UDP port

  2302-2303-TCP port

  192.168.1.101

  2302-2400-UDP

  6073 - at once

  8085 - at once

  TCP port 26100-26110

  27100-27110-both

  When I try to set up my new router, it says I have overlapping of ports. Maybe I'm confused but how could he have been working on my old router and now it does not work on my new?

  Of course, try this, and I think I could solve your problem.

• Airport of Port Forwarding is more?

  So I'm pretty new to this network thing. I don't know the technical network terms then please do not use (or at least their simplification). So I managed to set up my ASUS RT - something something router. I also put in some rules to sink my Xbox One anywhere port forwarding. However, I had problems with port forwarding, so I just used the dmz for her service. However, given that I had to move my Xbox to another part of my house with worst network connection, set up a time capsule for the network. After a long time, I managed to do the work, but now I can listen to is no longer my Xbox. My guess is that the port forwarding rules are not carriers, as it connected via ethernet time capsule and the capsule is connected to another time capsule via radio and this time capsule is connected to my ASUS router via ethernet. So my question is: how to transfer the required ports to my Xbox?

  If both of your time Capsules are configured as bridges, the Asus router is the one that needs to be set up on port mapping. The port mapping is used only when a router is configured for routing. In other words, the NAT and DHCP services are enabled. This is the default value for any router.

  Just to make sure that I understand your current network configuration, the following is correct?

  • ASUS > Time Capsule > > > Time Capsule > Xbox, where ' > ' represents a wired connection, and ' > > > ' represents a wireless.

• How do I port forward on apple airport? (READ ALL)

  I have an airport express from apple connected to an asus router via wifi and I need to know how I can portforward by airport to the router because my pc is connected by ethernet to the airport. Help, please.

  The express should be none not routing at all and therefore no port forwarding.

  The only way this can work is the express installation to the wireless bridge... Apple called client mode... There is no routing.

  BUT it can also have port problems... It is really unsuitable if you operate in questions.

  In any case all the transfer is possible on the Asus.

• LRT214 Port Forwarding does not

  First of all, when you create a service in the port forwarding section, why to select the two TCP/UDP has been omitted from the selection must be embarrassing for Linksys.  Creation of 2 services, one for the other for UDP and TCP are bad design.  Would love to see that this problem has been corrected in future updates of the firmware.

  The main problem is I have configured port forwarding services, but I can't get anything to work.  I am able to access remotely to the router using the port 1443 that is configured in a separate section.  I worked in the network design and mgmt for 10 years and why Linksys decided to make the management for the LRT214 so different interface, then the rest of the market was a bad decision.  Is there anything else you can suggest to help out why these ports cannot be opened through the FW?

  On this router logs show nothing.  There is no log for blocked inbound connections and there is a class router business?

  After setting up some boxes of Windows on the local network, then transfer to a custom RDP listening port, I am able to RDP in these Windows boxes remotely.  It verifies that the Linksys router is forwarding ports correctly.  The question then is something on the Synology device itself.  Thanks for your response!

• RV042 Port forwarding stops working when the firewall is turned on

  Hey all,.

  I have an on a single WAN RV042 router and internal network. I have configured port forwarding as follows:

  HTTP[TCP/80~80]->10.0.0.6
  HTTPS[TCP/443~443]->10.0.0.6
  IMAP[TCP/143~143]->10.0.0.5
  IMAP SSL[TCP/993~993]->10.0.0.5
  SSL[TCP/587~587]->10.0.0.5 SMTP

  Everything works fine when I have the firewall turned OFF. However, when I enable the behavior is erratic. 1 of 10 attempts to connect to ANY port transmitted works. Almost all attempts at expiration time.

  Note that this happens even if you only use the default firewall rules (which must be circumvented by the port translation I've read in other posts).

  My second try was to create rules to Firewall manually, the substitution of the value default ones. I tried to add source WAN1 rules (where is my connection) to the ONE and UNIQUE IP on each port. Nothing seems to work.

  I don't know what I'm doing wrong, it's really bugging me. I had to disable the firewall if we can access our servers from outside the office. It shouldn't have to do.

  Do you know what I might try?

  Best regards

  Theo

  Hello.

  These products are processed by the Cisco Small Business Support Community.

  * If my post answered your question, please mark it as "acceptable Solution".

  Thank you!

• Limited number of ports forwarding with WAG54G2?

  Hello, I have a simple question... I'm looking to buy a WAG54G2, I downloaded the manual to check if there was a limit of ports to send because I know that it was a limitation on previous models, but I've found no information about it.

  Please can someone tell me if there is still such a restriction on this model (I think limit 10 ports on WAG54G)?

  Thank you

  Colin.

  WAG54G2 have still 10 entries for Port Forwarding (see this ), however, you can give a range of ports if you have more than 10 entries... (for example: If you have 11, 36, 48, 1014, 5214, 6452, you can just give him a range say: 11-6452, it will cover all ports between 11 and 6452)...

• Advanced Port forwarding rules

  I bought a WRT1900AC router and changed my old router Dlink DIR - 905L.

  There is a function in Dlink to set a unique public port in the router to redirect a private IP LAN and LAN if necessary internal address port. This is called: "Advanced por rules of transfer".

  In this function I defined a rule like this (real case):

  Name: CCTV

  IP address: 192.168.0.120

  Public Port: 80--> 80

  Private port: 80--> 80

  Tye of traffic: all

  Question: Where can I find this function in the WRT1900AC?

  Appreciate your help, my CCTV is not managed.

  Hi HappyLefty. That's how we have implemented simple Port Forwarding on Linksys routers. Will we know what you want to accomplish with the WRT1900AC? We would like to have a better understanding of your challenge with our camera so we can help you accordingly.

• Setting up Port Forwarding on router WRT54G, working with a WVC54GCA Wireless CAmers

  I have the equipment in question and you need to know a few things when it come to put in place for Internet access. Before I aske the question, however, I have the following IP addresses associated with this project: WVC54GCA - 192.168.2.102, router WRT54G - 192.168.2.1, the questions are:

  1. How do you define Port Forwarding on every element.
  2. Should the two articles have static IP addresses.
  3. Once the port forwarding is set, what is the structure of the URL to access the camera?

  Any help would be appreciated, summer tear my hair on it. Seems simple, but obviously not. I'm missing something.

  Thank you

  For port forwarding, you will first need to set the camera to a fixed LAN IP address (static).

  If your router uses the range of 192.168.2.100 thanks 192.168.2.149 DHCP servers, then 192.168.2.102 is an unauthorised fixed address.  With the Linksys routers, any fixed LAN IP address must be outside the range of the DHCP server.

  Here are the rules of use of the fixed LAN IP addresses with Linksys routers.  (Note: these rules were written for the 192.168.1.x subnet.)  Since you're using the 192.168.2.x subnet, change all addresses accordingly):

  With Linksys, routers, a fixed (static) IP LAN addresses must be assigned in the device that uses the address. If you need to enter the fixed address to the computer, printer or camera, not in the router.

  When you use a Linksys router, any fixed LAN IP address must be outside the DHCP server rank (typically 192.168.1.100 thru 192.168.1.149), and may not end with 0, 1 and 255.

  That's why any fixed LAN IP address would normally be of the order of
  192.168.1.2 thru 192.168.1.99 or
  192.168.1.150 thru 192.168.1.254
  assuming that you always use the default DHCP server line.

  In addition, in the computer, when you configure a static LAN IP address, you need to set the "Subnet mask" 255.255.255.0 and the 'default gateway' on 192.168.1.1 and "DNS server" to 192.168.1.1.  Note that some network devices can not use server proxy DNS at 192.168.1.1.  In this case, the value "DNS server" your real address of Internet DNS server (found in the router when connected to the Internet).

  It is also important that the same value static LAN IP address no two devices on your network.

  **********************

  After you gave your camera at a fixed LAN IP address, then go in "Port Redirection" in the router and configuring the ports one (or more) to the address LAN IP fixed camera.

  In order to access your camera from the Internet, you will need to either:

  (1) get a fixed Internet IP address (static) address from your ISP and configure your router to use this address, or

  (2) use a free service such as DDNS.  DDNS allows you to use a dynamic Internet IP address, but can connect you by using the same URL.

  I hope this helps.

• WRT310N - Port forwarding problems.

  Problem is that it doesn't.

  I have a series of 600 Zyzel DSL Modem/Router in passthrough mode.  Everything works well.   PC on the network have no problem out etc... but I have several webcams wireless I can't access from the internet.  LAN has no problem.  I've set up port forwarding and nothing.   I can't access anything whatsoever for that set up the transfer.  I've updated the firmware, I toggle etc etc and nothing seems to work.   I'll guess it's maybe something with the pull-out decision, but that's just a guess... gut feeling.  I had an older router on the network before but got this new, but he wasn't in passthrough mode, I just used it as an access point for the wireless.    I guess that I couldn't take off passthrough and test, but not at home so I can't do it right now.

  Anyone aware of issues like this?   Does not much feel... all eyes right configuration.

  And he who responds, you can talk shop, I'm a blade L3 technician and an engineer of SAN...  That is, I know my way around computers and networks.

  Figured it out... ID10T...   Problem was, indeed, the devices themselves.   Because of the way I had the network installation before that all wireless devices had the wrong IP to the new access point.  Once I fixed that the transmission was successful.

  In addition, I kept the DDWRT firmware, it's so much better than the version of Linksys, it's not even funny.  (Wonder if they delete this because of me saying that...) I had problems of resistance low signal 30 feet away from the other side of the House... questions to xbox 360 streaming.  Once I have updated the DDWRT firmware the intensity of the signal went to full and streaming on the 360 problems disappeared.

• Problems with WRT610N v2 + WAG54GS v1.0 of port forwarding

  Background:

  I have a WAG54GS v1.0 (Appendix A) that I use to manage my home network and my ADSL connection. I bought a WRT610N v2 (which I will refer to as the router) with the intention that he would replace the functions of networking of the WAG54GS (which I will call the modem), who could be relegated to handling just the Internet connection. Both are running their latest firmware.

  I got this configuration to work, but with a problem: I lost a lot of flexibility with regard to port forwarding. The problem is the only way I managed to get the Internet to work with the 192.168.0.1 router and the modem to 192.168.1.1. If I try and that you have both 192.168.0.x or 192.168.1.x then connect to Internet no longer works under any configuration options, I've tried.

  What wants to say that when I go to port forwarding of installation in the modem, I can only forward to clients on 192.168.1.x, but the router can only transmit to 192.168.0.x. The only things that I can go to work are situations where triggering serial port can be applied, so that when a connection is made to the relevant port to an external IP address, and then this external IP address to communicate on this port. As you can guess this covers almost all cases.

  Question:

  Would it not be possible to have the router and the modem on 192.168.0.x or 192.168.1.x, allowing port translation work as expected. Which should in principle be possible with the modem bridge mode except that it is impossible to configure the PPPoA settings needed to connect to my ISP.

  Or I'll have to rethink the configuration of the network (i.e. buy a dedicated ADSL modem and remove entirely my WAG54GS?)

  In fact in the end what I figured out was that according to my WRT610N concerned my WAG54GS is my ISP and that was all he needed to know on the Internet connection. So I had to connect to the WAG54GS with an IP address static, stuck that IP in the DMZ of the WAG54GS and left the WRT610N to manage port forwarding like all devices that connect will make it through that. (Yes, I've disabled features wireless of the WAG54GS)

  I'm reasonably sure that I tried the combination of settings you suggested (including moving the WAG54GS off the Internet port on the WRT610N, which I wanted to avoid in any case as I have four devices permanently connected in any case) and found that it still does not. And I wasn't saying two to 192.168.1.1 set at any point, my darkened auto focus was that change only the last block of the IP address doesn't have to work for Internet access.

• Try to open the port or do port forwarding for update of the game client (improve the download speed)

  I recently participated in the beta FFXIV and im not to attempt to update the client. It happened for a day now and im only at 78%. I looked on the forums on the site and he told me I should do port forwarding and ill be able to download the updated much more quickly. So my question is how do I port forwarding on a router NetGear on Windows Vista.

  Hello

  Ports must be sent to the IP of the specific computer.

  A specific port can only be transferred to a computer.

  He must be facing forward in the router and also via the firewall software.

  Instructions depends on the specific router you have (the manual force) be useful and the specific firewall software that you use (using the software may contain instructions).

  This site is the champion of port forwarding, http://portforward.com/

  Jack-MVP Windows Networking. WWW.EZLAN.NET