Port forwarding for EYEMAX DVR on WIn Server 2012

We use the router as a network controller on our local network. Now, we have replaced router with the server (win 2012 r2 essentials). We have an EYEMAX DVR client software to connect to a remote ip address in the web.

Previously, I had the configuration of port forwarding router and EYEMAX was working. When we replaced the router with a server that I can no longer connect. I guess that there is a similar setting to perform on a server, but I can't figure out what to do. This certainly isn't a Firewall (when I turn it off EYEMAX still do not work).

There is a statement (http://site.camtechsurveillance.com/downloads/remoteacc.pdf) how to configure a router to work, but I do not know how to apply similar changes on the server.

TL; DR.

How to do the same on the server like here http://site.camtechsurveillance.com/downloads/remoteacc.pdf

Try asking in the Windows Server forum:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

Tags: Windows

Similar Questions

  • Port forwarding for the suddenly closed Linksys router

    I have a 54G wireless router... correctly port forwarded a request of a CPU (server)... but after no connection made by the user on the server... it suddenly close the application... so what I did is to reboot the router in order to refresh the connection...

    Are there other ways to fix this sudden closure of ports?  so that I would more restarts on my router

    I appreciate a lot of help...

    As directed by your statement the port that you have passed on the closed router without any connection to the server is unusual. Please make sure that you have configured an IP address static (outside the range of the router DHCP) on your server and put the same IP address for the specific port port forwarding tab.

    In addition, reduce the MTU size on the router to 1400. See the link below on how to make the changes in the MTU size.

    http://www6.nohold.NET/Cisco2/UKP.aspx?VW=1&docid=c018b947b8774e54bd57fad02e3efddd_17331.XML&PID=80&...

  • Program running as an administrator in Win Server 2012

    Hello

    I installed Win Server 2012 on my hyper-v virtual machine. I installed the trial version of Statistica software there. When you run the trial version, should be the admin right otherwise, he asks for the license. When I run the program in Win 7 or 8 win as an administrator, there is no problem and I can use it. But when I tried in 2012 WS, it didn't work. I don't even have dialogue if I want to allow the program to use the admin right. So, my thought is that, even if I run as administrator, it does not run as administrator. No doubt some WS 2012 policy. Does anyone have an idea what to change here so I can run as an admin, as in Win 7 or 8 Win?

    Thank you.

    Hyper-v on the server 2012 forum is here. http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserverhyperv

  • Installation of Win Server 2012 9 desktop problems

    I have a 64 bit Windows 7 with 9 Workstation installed host computer.

    I am trying to create a virtual machine for Win Server 2012, but I get a license error.  There are other posts on this topic, but it relates to the work station 8.  I tried the solutions in these messages, but I still have a problem.

    I downloaded the ISO file using Internet Explorer twice.  Once I used the ISO to create the virtual machine and once I burned the ISO to a DVD and tried.  It always gives me this error when installing:

    "Windows cannot find the Microsoft software license agreement.  Make sure that the installation sources are valid, and restart the installation. »

    The problem is that I tried the installation of 5-6 times and I can't spend.

    All the world did this with success?

    Thank you

    Stem

    Try this:
    When you create a new virtual machine
    -Choose the option: I'm going to install the operating system later. (The virtual machine will be created with a blank hard drive.)

    Do not type the path to the ISO file

    -After the creation of new virtual machine also set the path to the ISO file (VM / parameters / CD-DVD.../Use ISO image file)
    -After the execution of the new VM to install automatically saved (if not run probably on purpose = error)

  • port forwarding for file sharing on the internet.

    I am trying to determine what port numbers, I need to transfer to my router (in virtual server) to be able to share my NAS files over the internet with my friends? I want to use file sharing, have implemented a DDNS on the NAS with a client account to my dynamic IP address, but cannot get the numbers correct port developed to be able to configure port forwarding. Can anyone help?

    Hello

    Open sharing Ports that are used on a local area network on the Internet is a Big safety hazard.

    There are secure applications that are built for this purpose, they use their own ports and generally are safe (as on the VPN or SSH).

    A free quick simple way is shared through secure ftp server. http://FileZilla-project.org/

    An elegant way door application like this, http://download.cnet.com/WebDrive/3000-2160_4-10017919.html

    In general, http://www.practicallynetworked.com/howto/fileshare/fileshare_intro.htm

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • Need help with the port forwarding for a XBox remote Streaming

    I have a router R6200v2 and need help with port forwarding.

    I came across this set of instructions for setting up stream port forwarding XBox remotely from anywhere

    http://kinkeadtech.com/2015/07/how-to-stream-Xbox-one-to-Windows-10-from-anywhere-with-Internet/

    I have no idea when it comes to such things and I want to make sure I do it correctly without messing up my existing home network.

    Port Forwarding and triggering Port pages setup look very different from what the guy uses. Can someone walk me through what I do to set up please?

    Hi @varxtis,

    You must enter them in the field for a start external Port and external completion Port. You will need to send individually except for the range of 49000-65000. The steps are as follows.

    1. create a Service name (it could be something else that you cannot use the same service name twice. Ex. XBOX1, XBOX2 and so forth.)

    2. Select the type of service (TCP, UDP or both)

    3 entry 5050 times a start external Port and external endpoints.

    4. Select the IP address of your XBOX.

    5. Select apply.

    6 do the same for other port numbers. To the beach, use 49000 for the external departure Port and for the external completion Port 65000.

    Kind regards

    Dexter

    The community team

  • Try to open the port or do port forwarding for update of the game client (improve the download speed)

    I recently participated in the beta FFXIV and im not to attempt to update the client. It happened for a day now and im only at 78%. I looked on the forums on the site and he told me I should do port forwarding and ill be able to download the updated much more quickly. So my question is how do I port forwarding on a router NetGear on Windows Vista.

    Hello

    Ports must be sent to the IP of the specific computer.

    A specific port can only be transferred to a computer.

    He must be facing forward in the router and also via the firewall software.

    Instructions depends on the specific router you have (the manual force) be useful and the specific firewall software that you use (using the software may contain instructions).

    This site is the champion of port forwarding, http://portforward.com/

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • Port forwarding for Cisco RV042G TSE

    Hi, I have just configured a Cisco small Business routers on my network RV042G. My problem is that I would like to allow TSE through the WAN1 and I am not able to do. I place this information in the menu:-Setup / Forwarding TSE[TCP/3389~3389]->192.168.1.15 - firewall / access rules: allow TSE [3389] WAN1 192.168.1.15 ~ 192.168.1.11 192.168.1.15 ~ 192.168.1.15 still configuring it please? Thanks for your help.

    Thanks for the reply.

    There is nothing else that can be done on the router RV042G. all the configuration is in place.

    The only other way to make this work is to see if you can do the port forwarding on your modem and then forward all ports to the WAN address of the RV042G, or if the modem allows to create a DMZ, then you can connect the router to the DMZ port, but that's all.

    Please let us know.

  • Why my Win Serv 2012 std (hp ROK) do not settle on my 5.5.0 esxi?

    Hi people,

    I am a beginner, so be patient with me please.

    My company bought a proliant DL385p Gen 8 and it came to pass with support of dvd windows server 2012.

    The media label says:

    "Windows Server 2012 Recovery Media for Windows Server 2012 ROK products for HP Proliant Servers"

    I'm trying so install windows 2012 with this media in my Esxi 5.5.0, but the installation starts I get a message saying tha windows must only be installed in the hp machines.

    My doubt is that I am under esxi custom hp: VMware-ESXi-5.5.0-1746974-HP-5.72A.3-Jun2014.iso

    Why my windows does not recognize that I have do its installation on an hp machine?

    How could I solve this problem? Could I download another image of windows and activate it with my key product?

    Best regards

    You can get more help on the forum specific Proliant here:

    http://h30499.www3.HP.com/T5/ProLiant-servers-ml-DL-SL/BD-p/ITRC-264#.VCIs4PldXuI

  • How to disable a license key for the bulk of r2 server 2012

    I bought a retail version of server 2012 r2 essentials to upgrade my 2003. I found my software is not compatible with the 'Essentials' and it is compatible with 'Standard '.  Now I'm going to buy a standard edition for sale at retail. My boyfriend is interested in the "essential" to its server.

    How can I disable the license key of the 'essential' that I can not use and give it to the other use?

    This issue is beyond the scope of this site and must be placed on Technet or MSDN

    http://social.msdn.Microsoft.com/forums/en-us/home

  • Question: How can I format Ubuntu 10.10 on my machine for the installation of Windows Server 2012

    My machine is installed with Ubuntu 10.10 and together as a web server for a few months.

    Now, I need to totally remove the Ubuntu and install the large Windows Server 2012 RC.

    Easy steps?

    Post in the Windows Server Forums:
    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

  • Port forwarding for Xbox

    I have a UTM9S Prosecure home and it does not block the Xbox 360 online.

    Xbox is recommended to open the following ports:
    Port 88 (UDP)
    Port 3074 (UDP and TCP)
    Port 53 (UDP and TCP)
    Port 80 (TCP)

    So I went to the network security-> Services and also Services network-> release of Port Security and added above (TCP and UDP) ports.

    I also enabled UPnP they recommend.

    No luck.

    It was before working with a small router Linksys, so I know it can work if I have the right config, but do not know what I am doing wrong.

    Any suggestions?

    I use a UTM25S on firmware version 3.6.0-32. uPnP does not seem to work for XBox Live. I used the installation trigger port in the post of Shanlord and now it works fine.

  • Failed to retrieve the installation package for light silvery in Win Server 2003

    Hello

    While the light silvery in Windows server 2003, installation is failed extract the installation package.  We tried to install Windows Installer 4.5 and then to "the file updatbr.inf is not valid'.»»
    Any solution pls?

    It is a forum for specific consumers. You will find the Windows Server support in these forums: http://social.technet.microsoft.com/Forums/en/category/windowsserver

    Specific Windows Server security sub-forum: http://social.technet.microsoft.com/Forums/en-US/winserversecurity/threads

  • Port forwarding on WRT54GL does not

    Thanks in advance, trying to track forward setup my linksys WRT54GL allow Remote Desktop from outside your desktop (private static IP).

    I have a configuration of modem netgear in bridge mode (so the firewall is disabled on the modem), and the Linksys WRT54GL Firewall enabled, with "filter internet NAT redirectin" unchecked.

    I also, port rule before the Setup program in the game & Apps, to transfer the TCP 3389 to my office (private) static IP address.

    I make sure firewall is not blocking the RDP traffic, and I can RDP on the desktop to a laptop on the WIFI network.

    But the rest of the world, I can't not RDP using my ISP (dynamic) IP address.  times out.  I don't know that I have the IP address of my ISP at the moment.

    Thoughts?  I present screenshots if necessary

    After further digging... I found the problem, it was with the Windows 7 firewall.

    I made sure 3389 (and RDP application) was allowed on Win Firewall (this is why I could RDP on my WLAN), but for the rule of the RDP, under the "Advanced" tab, I also had to "allow the crossing side.

    It was the first time I set up the port forwarding for a box of Win 7, so didn't even know that this setting exists in Windows 7.

  • Implementation of IPSec Port Forwarding on a Windows 2012 with a LRT224 Server

    Hi all I hope someone can help me validate my troubleshooting. I'm deploying a Server Windows 2012 that will server as a server vpn for customers. In place is a LRT224 with 4 VLANS set up. I have enabled port forwarding for IPSec (UDP/500), L2TP (UDP/1701) and L2TP (UDP/4500) to go on the server.

    In my Initial test, I put the LRT224 on the same network as the client of my test and realized the Test Client (10 Windows) to try to connect to the WAN of the LRT224 interface. I get this message:

    Thinking it could be the configuration of the server, I then put the client system on the same vlan on the LRT224 server. When I tried to connect to it directly by using the IP address of the server as a destination, he succeeded.  It is leading me to believe that it is the LRT224.

    I confirmed that VPN passthrough is enabled.

    The firmware version is by: v1.0.5.03 (February 22, 2016 10:12:17)

    Currently, the firewall is disabled (I would activate once I'm working)

    If anyone has ideas or notice a fault in my tests, I would really appreciate the feedback.

    If additional information would be useful, please let me know what you want and I can work for it.

    Thanks to all in advance.

    FreeFallFour wrote:

    I then put the client system on the same vlan on the LRT224 server. When I tried to connect to it directly by using the IP address of the server as a destination, he succeeded.  It is leading me to believe that it is the LRT224.

    It does normally not as I KNOW because the VPN in an outside in the process. You should test the VPN connection outside the server's IP subnet.

    You have the server configuration that the DNS server in the router to DHCP with DNS Proxy is disabled?

    Are you doing load balancing Internet connection?

Maybe you are looking for