Port group

Similar Questions

• Get-nicteaming of the distributed port group.

  Hello.

  I try to get nic teaming policy of dv port groups, but had issues with pipes (5.5, 5.5 dvswitch vsphere, powercli 5.5.0.6632):

  PS C:\Windows\system32 > $dv = Get-VirtualSwitch-distributed

  PS C:\Windows\system32 > $dv

  Name NumPorts Mtu notes

  ----                           --------   ---   -----

  1170 1500 dvSwitch

  PS C:\Windows\system32 > $pgs = Get-VirtualPortGroup - VirtualSwitch $dv

  PS C:\Windows\system32 > $pgs

  Name key VLanId PortBinding NumPorts

  ----                      ---                            ------ ----------- --------

  dvSwitch-DVUplinks-44 dvportgroup-45 18 static

  Management dvportgroup-46 128 static network

  INET_UITIS_ephemeral dvportgroup-845 ephemeral 0

  KSPD_ephemeral dvportgroup-846 ephemeral 0

  GZ_Interconnect_ephemeral dvportgroup-843 0 ephemeral

  INET_GUEI_ephemeral dvportgroup-844 ephemeral 0

  VeeamISCSI_ephemeral dvportgroup-849 0 ephemeral

  VeeamISCSI dvportgroup-92 128 static

  Management_Network_eph... dvportgroup-847 0 ephemeral

  ManNetwork_ephemeral dvportgroup-848 ephemeral 0

  vMotion1 dvportgroup-51 128 static

  KSPD dvportgroup-50 128 static

  vMotion2 dvportgroup-52 128 static

  GZ_Interconnect. static 128 dvportgroup-49

  INET_UITIS dvportgroup-339 128 static

  ManNetwork dvportgroup-47 128 static

  INET_GUEI dvportgroup-48 128 static

  Then, if I try this:

  PS C:\Windows\system32 > $pgs | foreach ($dv Get-NicTeamingPolicy - VirtualSwitch - VirtualPortGroup $_)

  I got an error on the conversion of 'VMware.VimAutomation.ViCore.Impl.V1.Host.Networking.DistributedSwitchImpl' in 'VMware.VimAutomation.ViCore.Types.V1.Host.Networking.VirtualSwitch '.

  If I try this:

  PS C:\Windows\system32 > $pgs | foreach (Get-NicTeamingPolicy - VirtualSwitch $dv.name - VirtualPortGroup $_)

  I got another error on the conversion of types of vportgroup 'VMware.VimAutomation.ViCore.Impl.V1.Host.Networking.DistributedPortGroupImpl' in 'VMware.VimAutomation.ViCore.Types.V1.Host.Networking.VirtualPortGroup '. No luck with "..." -VirtualPortGroup $_.name' also, it says that I can not specify type string as input for - VirtualPortGroup.»

  It seems that "get-nicteamingpolicy" comandlet cannot take dv types as input, but I don't know if.

  Seems I forgot, you must use Get-VDUplinkTeamingPolicy to VDS switches

• Get the VLAN of a port group

  What is the fastest way PowerCLI, when knowing the name of a virtual machine and that it is on a standard switch, I can find the number of VLAN that the port group it uses is labelled for?

  Try ' Get - VM $VM_Name | Get-VirtualPortGroup | SELECT name, VLanId.

• Put virtual machines inside the VMkernel port group

  Hello

  Network for administrators of VMware SIAS layout:

  "You can not put VMs within that group of port because it is made especially for a VMkernel port."

  However, I use ESXi 5.5 and is able to put normal interface of VM inside the vmk port group. (I only created 1 vmk port group so all virtual machines in the same group with the vmkernel interface)

  May I know if this is a new feature, or something is wrong?

  Thank you!

  This may be possible with distributed switches not with standard switches.

• How the Virtual Machine port group communication?

  How the Virtual Machine port group communication?

  Port group is virtual aggregation of ports on vSwitch. A vSwitch can have multiple Port groups which separate the different network traffic. Port groups communicate with vSwitch, and we have physical network maps on vSwitch which establish communication with the external network. We can configure security, NIC teaming, traffic shapping nework political and at the level of the port groups. Once the port group is created, we can assign to vNIC

  How to establish communication?

  Public network > Switch L3 Core > ESXi physical adapter > vSwitch > groups > virtual NIC > Virtual Machine

  Virtual machine connect to the physical map using vNIC coming on Port groups. This is how it works.

• Automate the network port group selection in vsphere replication

  Hi, when you use the vsphere replication tool to recover servers in the data center of DR, the tool does not gives option to select network settings. I have to manually add the port groups and turn on the system remotely vcenter. Is it possible to automate this process, when the replication of a major part of the vms ~ 100-150. I would like to know if there is another way to fix the process and avoid the manual load.

  I use replication of vsphere device version 5.8

  Thank you

  The only way to automate this process is through the Site Recovery Manager.  Automate and orchestrate BC/DR is a big part of the value offered by SRM. The other advantage is the ability to test your recovery plans without disruption of service.

  Does that answer your question?

• Set a vm network distributed port group

  Try to set up the network to a virtual computer to a port group distributed.  There seems to be a quick and easy way to do this - you need a small code snippet that does?

  I was thinking something like this (u_vm is a Vc:VirtualMachine)

  NIC var = new VcVirtualEthernetCardNetworkBackingInfo();

  nic.deviceName = "VGA-myportgroup";

  spec var = new VcVirtualDeviceConfigSpec();

  for each (var edge in u_vm.config.hardware.device)

  {

  If (device.deviceInfo.label is "Network adapter 1")

  {

  Spec.Device = device;

  Spec.Operation = VcVirtualDeviceConfigSpecOperation.edit;

  Spec.Device.backing = nic;

  }

  }

  u_vm.reconfigVM_Task (spec);

  But as the bombs with this error:

  [13:20:42.303 2015-06-23] [I] can't convert the com.vmware.vim.vi4.VirtualDeviceConfigSpec@ffb8e5cd in com.vmware.vim.vi4.VirtualMachineConfigSpec (workflow: meh / Scriptable task (item1) #17)

  What about using the library for this workflow?

  \Library\vCenter\Networking\Distributed Virtual port Group\Connect VM number NIC to distributed virtual port group

• An easy (hopefully) change of multiple VMs port group

  Hello

  I have about 50 VM (all with different naming conventions) and I need 47 of them to change their port group for a special (and the last 3 to another)

  I managed this by:

  Get - vm VMNAME3 | Get-NetworkAdapter | Together-NetworkAdapter - NetworkName "dmz-vlan999" - confirm: $false

  But I'm trying to avoid running 46 additional lines (one per VM), is it possible to do this easier than 47 lines?

  Thank you!

  You have these VMs 47 in a file somewhere? A text or CSV file?

  Then you could do

  $vmNames = get-Content vmnames.txt

  Get-VM - $vmNames VM | Get-NetworkAdapter | Together-NetworkAdapter - NetworkName "dmz-vlan999" - confirm: $false

  If you have a CSV file with this layout example

  VMName

  VM1

  VM2

  Then you use this as the first line

  $vmNames = import-Csv vmnames.csv | %{$_. VMName}

• Distributed port group

  Hi guys,.

  Is it interesting / reason to be distributed without an adapter vmkernel port group?

  I guess that you are referring to a vmnic, the physical network card? If so, the answer is "rarely". The virtual machines in this group of ports cannot talk about what anyone outside the host on which they are located.

  If you are talking about vmkernel from the host interface, the reason why you would have a dvPortgroup without that one would be a VM guest liaison.

• NSX Distributed Firewall - can you firewall connected vNIC distributed to port groups

  Hello

  If your virtual machines were connected to various groups of distributed (I.e. VLANs) port on a vSphere distributed switch, then you installed NSX, NSX allows create you firewall rules that apply to these VM vNIC is related to these same groups distributed port? I wasn't sure if you were first to migrate virtual machines to virtual switches before NSX allowed to assign firewall rules.

  Thank you.

  We can use NSX dFW windout enable virtualization of network (VXLAN and controller NSX) on the Cluster.

  DFW NSX can operate on both VSS or vDS

  NSX DFW works at the level of VM vNIC, which means that a virtual machine is always protected, regardless of how it is connected to the logical network.

  VM can be connected to a port group VLAN supported VDS or a logical switch (port-group supported by VXLAN).

• Power CLI script to add multiple VLANs with port group name in an ESX cluster

  Hi all

  Can someone help me get a script adds several VLANs with port group name in an ESX cluster?

  Kind regards

  Suresh

  OK, so you just need to do an Import-Csv inside the loop and change the variables accordingly.

  What is the provision of this CSV file?

• Need a script to create standard vSwitch with virtual and several computer port group VLAN

  I want to create standard vSwitch for all hosts in the cluster for virtual machine port group and add one or more groups of ports VLAN for the same standard vswitch.

  Kind regards

  Shan

  Try something like this

  $clusterName = "mycluster.

  $nics = "vmnic0", "vmnic1.

  $vlans = 123456789

  foreach ($esx in (Get-Cluster-name $clusterName |)) Get - VMHost)) {}

  $sw = New - VirtualSwitch - name swX - VMHost $esx - Nic $nics - confirm: $false

  $vlans | %{

  New-VirtualPortGroup-name "PG $($_)" - VLanId $_ - VirtualSwitch $sw - confirm: $false

  }

  }

• iSCSI Initiator Port Group error

  Problem adding in the vmk second to an existing iSCSI vSwitch.  Original config was 2 vmks - all worked successfully.  1 vmk has been removed to solve network problems.

  Re-created the 2nd vmk, but when going down one of the cards the unused category as soon as active network OK is selected the message "this vmkernel port group contains a NETWORK card.

  which is related to an iSCSI initiator.  Change its settings could disrupt the connection to the iSCSI data store"is displayed.  The response options are Yes or no.  A screenshot is attached.

  vCenter is version 5.0 U1b.  The host is ESXi5.0 U2 and mode of maintenance with none of the guests.  The host on the local disk not stop SAN.  I can safely click Yes, then go back and

  move the vmnic or is there a better way to fix this problem.  Thank you.

  Thanks for sharing the information. Please try below steps:

  Step 1. Remove links in the existing port and reboot the host.

  Step 2. Change the port iSCSI and vmnic preferred value to active group and move the second unused NETWORK card.

  Step 3. Change group 2-port iSCSI and vmnic preferred value in the active State and move the other card unused NETWORK.

  Step 4. Add vmk1 and vmk2 under links in the port iScsi initiator network configuration.

  I hope steps above will help to solve the problem. If you encounter the error even if you please let me know.

• How is it that I can ping between ESXi vmkernel interfaces with the sizes of package exceeding the value set in my passage upstream and one located in my vmkernel port group itself?

  
  I have a 10 GB dell powerconnect 8024f the switch and the firmware is OLD, but the port config shows maximum frame size = 9000 to all cable ports

  2 guests ESXi 5.5 wired, build 1331820, put each host computer network is managed by a single port dual qlogic 8150 ANC

  When I connect to my windows VM to check my new 10 GB connectivity (it is configured for jumbo mtu = 9000 frames) and ping-l 8190 against ESXi vmkernel interface that was MTU of 1500, I get an answer without any packet loss... How can it be if the port is configured for only 1500 MTU?  I thought that the two vmkernel port group and vswitch properties must have 9000 mtu defined, it appears that the vswitch properties override the port group properties.

  But I know I must be missing something, a few important concepts, somewhere, because when I connect to ESXi via ssh I can ping devices with values greater than 8190 and not just windows virtual machines that reside on the same host where the ping uses the internal bus, but I am referring to the connections of the host of other ESXi on the switch management.

  In summary - how the VMkernel does ping and response to pings of bigger sizes greater than the value of the switch upstream?   and why do ping with large packets get answers when the vmkernel port group is always set at 1500, is this a bug or is this feature obsolete?   I remember specifically in ESXi5 that I had to configure the vmkernel port group and the vswitch for this property to work.

  Unless you specify "Don ' t fragment" (-f for Windows) you will be able to use any size package successfully.

  For ESXi, take a look at Troubleshooting ESXi Jumbo Frames.

  André

• VMKernel port group

  Here is the configuration of the network of one of our hosts ESX 4.1:

  (1) the virtual computer network

  (2) Service with 1 IP console

  (3) VMKernel with 1 IP for vMotion and iSCSI, called as VMKernel_iSCI

  I can see there are 4 NICs attached to this host.

  Now, I just know, that same using iSCSI and vMotion VMKernel is not a good practice.

  question 1

  So I would like to know how is the mapping of the ESX host's network. Is this;

  1 NETWORK card = 1 VM Network

  1 NETWORK card = 1 Service Console

  1 card NETWORK = 1 which is currently used for iscsi and vmotion VMKernel port group

  In a standard switch, there are 2 network cards configured.

  2nd question

  I want to delete 1 port VMKernal vmotion (VMKernel_iSCI) and create a dedicated for vmotion.

  I know that I have will require another IP address, but what of NIC, it will be;

  1 NETWORK card = VMKernel_iSCSI

  1 NETWORK card = VMKernel_vMotion

  Please explain.

  Thank you

  Mihir

  From a pure technical point of view, it will work, as long as your network is configured properly (i.e. taking advantage of VLAN and the separate subnets on management, vMotion and iSCSI). However, I am worried about the bandwidth and quarrels with such a configuration.

  BTW. except if you've already seen it, I would recommend that you take a look at http://www.vmware.com/files/pdf/virtual_networking_concepts.pdf

  André