Port of touchscreen

Similar Questions

• Pavilion HP 11: ethernet port on hp pavilion 11 fried... solution... ?

  Hi all

  new to the forum here and decided to join because I have a little problem with my laptop...

  I did something stupid today. I tried to program a hitachi PLC with my laptop and accidentally hooked the ethernet cable to the port of evil on the controller (the port that would normally connect to a touchscreen / HMI) with the result that my port ethernet on my laptop got fried. After a few seconds smoke started coming on my laptop from under the keyboard so I quickly janked out cable ethernet. It's only there for a few seconds, but the damage was already done.

  On the good side of things: everything seems to work OK again. WiFi still works. Only problem is that this laptop has a single ethernet port and I really need this port.

  I took the cover but nothing obvious comes out. I know it's kind of a vague question to ask; but someone would have ideas on what could have broken and how to check what might be broken and what not?

  I'm not very familiar with computers is passing, so forgive my lack of knowledge.

  Thanks in advance

  A network card is not present, there is a wireless adapter.

  Ultrabooks like yours with RJ-45 ports do not have separate wired adapters that can be replaced.

  The NETWORK adapter is part of the motherboard and is not replaceable individually.

  Given that yours was smoked checked there may be some damage of traces on the motherboard.

  With the help of a mulitimeter won't help in any way. Even at big books in ancient times the NIC was part of the motherboard. A ultrabook is not a desktop computer. Motherboards same office have the network cards integrated into the chipset.

  Replacing a motherboard, this is how your network port fried will have to be resolved. Otherwise, to avoid the cost of replacing the motherboard, use the USB cable card NETWORK adapter.

  Under the guarantee, the induced lesions of the RJ-45 port owner is not covered. It's an excluded damage type.

• Video ports

  I am looking to buy a HP 15-f085wm from Walmart for my daughter.  Like I'm in another State and cannot find a place to watch, this machine comes with a video port allowed use of the dual screen?  With the laptop with a touchscreen, I didn't if they do not include the video output port.

  Thanks for any help.

  Hi @james56 ,

  Thank you for visiting the Forums HP's Support and welcome. I looked into your problem on a HP laptop 15-f085wm and concerns with connection of a monitor. Here is a linkto the product page. You would be able to connect with a HDMI cable and a TV or a monitor.

  Here isa link to show you how do I connect a monitor.
  You can call our support to the 800-474-6836. If you do not live in the United States / Canada region, please click on the linkfor the number of support in your region. They will be happy to help you immediately. or address any concerns.
  
  Thank you.

• touchscreen compact Rio

  Hello world!

  I'm developing an application to control a cooler with Labview 2012 and Compact RIO. I would like to create a group of GUI to visualize data and a basic control.

  However, I would like to use a touchscreen to third party (not OR). Purchase the Labview Touch Panel module can I do?

  My question is: if it's just a screen and not a PC, simply by connecting to the RIO Compact RS232 port and launch of real-time application,

  It will allow me to control the VI?

  Thank you!

  I don't see why not.  You need to just make a protocol of good communications between your cRIO and computers touch screen.  I find a network stream to work very well.

• USB ports do not recognize my mouse

  I have a Sony 64 bit computer with Vista. I had the same Logitech VX Nano mouse before but she had to be replaced. I also had computer problems and restored the whole system using the F10 key. Now my new mouse, who has just arrived, this is the same exact model I had before will not work. It is not recognized. The mouse is very well that it is simply not connecting to USB port somehow. I downloaded the new software on the site Lgitech and I'm trying to update my drivers having a pilot online, but nothing seems to work. I'm not a geek and I really need this mouse works because I work online on my computer. Any help would be really appreciated. Thank you.

  Hi cadak,

  Which of these two is the one you have?  http://www.Logitech.com/en-us/support-downloads?modelsearch=Yes&modelNumber=Nano+VX

  You may need to install the software, but also the drivers for the mouse to be recognized (or drivers can be included with the software).  Make sure you have the 64-bit versions.

  With the installed mouse and the software and drivers installed, go to start / Control Panel / Device Manager and check that the mouse look and work correctly.

  Go to start / Control Panel / mouse and check the settings to make sure that it is correctly configured to work with your computer - especially if it's a laptop with a touchscreen.  If it has a touchpad, I would update the Sony touchpad drivers to make sure that it is not the cause of the problem.

  You have another computer on which you can test the mouse to see if it works (if we exclude a faulty new mouse or a USB transmitter)?

  I hope this helps.  If no, please specify the mouse so I can read more about the installation and what is required and the appropriate procedures.  In addition, is Vista fully up to date in terms of service packs and updates after reinstalling - otherwise, please do.

  Good luck!

• How to connect a second monitor to my hp touchscreen all-in-one

  HP envy 23 touchscreen

  casino3703 wrote:
  HP envy 23 touchscreen

  Hello

  There are several HP Envy 23 autour, what is yours? Some machines are HDMI port but ONLY for entry. If you wish. Please try:

  http://www.StarTech.com/USB-video-adapters

  cheaper version:

  http://www.Amazon.com/STARTech-com-multi-monitor-external-adapter/DP/B002FJQXXC

  Kind regards.

  Kind regards.

• Two monitors L2206tm - Windows 7 - can all both touchscreen make?

  I didn't realize the L2206tm is a commercial monitor and I posted about it in the forum of home monitor products, then I copy the post here. I hope you guys can help me.

  I have a custom desktop computer and I recently got two HP L2206tm monitors because they were on sale. My computer running Windows 7 Ultimate 64-bit. I have two monitors connected USB ports on the desktop, but if I touch one of the screen of one of them, the click or scroll or any action that happens on the other monitor. Is it possible, and if so, what is the easiest way to set up two monitors to use the touch screen feature? Is there a software to help make this process easier?

  AFAIK, you can't touch on two screens in the calibration mode. In Clone mode, it works; but it's probably not what you're looking for.

  You can try the below:

  Use the 'Tablet PC Settings' in the ' Control Panel/hardware.  Under 'Display Options', select a touch screen, hit calibrate, move the text to the selected touch screen while pressing on enter (incase you have extra monitors) then MOVE your mouse to this screen and click on the text.   Then calibrate the monitor and following the instructions in the calibration.  Once the first monitor is installed, follow these instructions again for each additional touch monitor.

  Source: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/does-windows-7-support-dual-touchscreen-monitors/e86ac4fa-5321-45c1-a1d8-0ca95fdcfc17

  Thank you

  Sasi

• Xbox connected to the HDMI port, the only problem being transmitted through the built-in speakers is extremely strong, o change the volume but not succession

  original title:

  Hi all
  I desperately need help. I recently bought a touchscreen "All-in-one" PC "Packard Bell OneTwo M.
  I plugged my Xbox via HDMI port to the rear and the visuals are great, the only problem I have is volume transmitted through the built-in speakers is very strong, I used the keys function keyboard to try to change the volume but no succession, the remote that I have provided with the PC has also volume buttons but them seems to change the volume of my digital TV which is also integrated in.
  Any help is appreciated
  Concerning

  Hello

  You can adjust the volume on your computer by following the steps in the link below:

  Adjust the sound level on your computer
  http://Windows.Microsoft.com/en-us/Windows7/adjust-the-sound-level-on-your-computer

  It will be useful.

• pointer that disappears with the laptop touchscreen 8 windows

  I just got an ACER laptop touchscreen v5-571.  I have no mouse and mouse pad to move the pointer.  It worked great until today.  The pointer is no longer visible.  I have configured to use the ctl key to see where the pointer is.  He shows me where the pointer is a large circle.  I tried to change some settings of the mouse.  The pointer is still not visible.  Any suggestion?

  I solved the mystery of the disappearance of pointer.  A few days before the disappearance of pointers remembered, I intend to show a movie via hmdi port.  In the darkness, I played with function keys.  Apparently I pressed the button "hide the pointer" (fn F7), next to the 'two screens' (fn + F6) key.   After press "fn" + F7 again.  The returned pointer.  No wonder that all the other suggestions didn't work.  I don't know if this info will help you, just to share.

• I have a lg 4 k tv (40 "40UH630V TV LG ULTRA HD 4 K) with HDMI 2. 0 and if I buy apple tv 4 can be used with HDMI 2. 0 port or do I HDMI 3 port to use this? Please help me

  I have a lg 4 k tv (40 "40UH630V TV LG ULTRA HD 4 K) with HDMI 2. 0 and if I buy apple tv 4 can be used with HDMI 2. 0 port or do I HDMI 3 port to use this? Please help me

  You can use it with your TV.

• MacBook Pro USB Ports

  MacBook Pro my keyboard and wireless mouse work in my usb ports but I can't mount drive flash sticks? Do not display in the finder, but will be blink in disk utility then disappears?

  Flash drives show in disk utility?

  In the Finder > Preferences > sidebar > devices is verified external drives?

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Trying to connect a computer to the lan port Aiport Express "auto assigned IP address"

  I am trying to connect a computer to the lan on my Airport Express port. In preferences, it says "status: connected, Ethernet has an assigned IP address and won't be able to connect to the internet." Any suggestions?

  An "auto assigned" IP address indicates that your computer could not find or negotiate with a DHCP server to obtain an IP address appropriate for network access.

  It should be more on your network to provide assistance if you need it. For example, is the terminal of AirPort Express the only router in the current configuration of your network? What exact model do? What is the brand and model of your modem Internet?

• Port SSL messages to jabber/gtalk does not stick

  Hi-

  It is not purely associated with Sierra, as happening on El Cap.  The port default to Google talk is 5223, which is blocked in my company.  I had previously configured messages to use 443, which is not blocked (and supports gtalk).  But at some point during the last couple months, gtalk stopped linking to work.  When I looked at it, she returned to 5223.  When I try to set it to 443 (disable the account, change the port, re - enable the account) everything looks good, but at the time when I try to connect, it turns to 5223.  I tried to delete the account completely re - create, both as a right has Jabber (port 443 from the beginning of setting) or as a gmail e-mail account and then change the port later.  Nothing does.

  Thinking perhaps it was corrupted prefs, I deleted all the * prefs to iChat and everything that seemed related to google or jabber.  No change in behavior.

  Anyone seen this before?  Help to solve if possible of love.

  Thank you!

  Hello

  Currently I use port 5222 and without SSL and my account settings Google is for applications that are less secure.

  I can't use 5223 or even443 with SSL on.

  

  21:01 Tuesday; October 4, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• iPhone headphone output port IS not working do not

  helmet SE iPhone does not work. Bought new Apple earbuds and determined this is the port the atria. Phone is only a few months old. Help, please?

  This morning, I installed the last 6update iPhone: iOS10.0.2

  My headphone stopped working this afternoon (after a few hours of use).

  I couldn't understand anything to make them work again. Returned and the phone and the headset are working again.

  Update Nevermind the last version of iTunes Music *. Each update is a version longer than music/iTunes

• Lightning iPhone 6s port has stopped working

  I connected my phone to load as usual and he did nothing. Plugged into my Mac and iTunes doesn't. I tried three different lightning cables who all worked but nothing now. I tried to plug it into the wall charger usual USB and two Macs.

  In my view, that the port of lightning on my iPhone is damaged or dirty. I also tried cleaning electronic contacts spray cleaner on the connector of the cable and it out of the port by inserting several times. Also tried out blow out with compressed air in case it was just dust. Nothing has worked.

  Any help?  Should I bring?

  Thank you

  It seems to me you've done as much as you can and it would be good to have Apple to assess.