Port of UTP on WLC4402

Similar Questions

• Airport Extreme router's Express is connected by wire, East of 1 Gbps ports on switch it extreme on 100Bt now?

  Hi all

  In my house, the extreme is connected to a fiber modem 250 / 250 MB/s and I plugged a time Machine as an Express via CAT6 UTP. All serve as a router and provide 2.4 and 5 GHz wifi on the different floors of the House. Just a question: Express has 2 ports ethernet 100BT, Extreme and Time Machine have 3 1000BT Ethernet ports. The extreme switch mode back all 100BT because of the Express ports?  Because that would explain the downgrade in the port on the extreme speed after that the PS3 has been used connected to the Express.

  

  The extreme switch mode back all 100BT because of the Express ports?

  No.... but any device connected to the Terminal AirPort Express will have a maximum speed of 100 Mbps. So, if you connect a 1 000 compatible device to the Ethernet port on the Express, it would appear as a device of 100 Mbps on the network as the Express is limiting speeds.

  So, if you want a device that is capable of 1 000 Mbit/s to have 1 000 Mbit/s speed on your network, it will have to connect to AirPort Extreme or time Capsule.

• Problems with ports ethernet E4200

  I have problems with my ethernet ports on my router E4200 V1.  I do not get on flow rate of 12 Mbps on a single connected wired computer.  If I replace it with a simple switch 5 port I get 60 Mbit/s using the same cables.  I looked through the creation and cannot come up with any solution.

  Any help would be greatly appreciated.

  Thank you

  Mike

  OK I tore across the network.  Started from scratch and found the problem.  It is quite strange, but everything works fine!

  I discovered through the process of elimination that the cisco router did not like my Panamax Lan UTP.  Cisco is apparently more strict with the signal than the simple switch or refurbished netgear router.  I had the protection on the power strip 6 Max near the iMac.  The totally weird part is that slowed down the entire network.  Streaming is now pending on 60Mbps at each connection to the local network.

  Thank you all for your time I walked through this weird problem.

  Mike

• WLC4402 - switch problem

  Hello, Im new in the wireless. IM want to connect AIR-WLC4402-25-K9 in my lab with switch cisco 3560. WLC I have two 1000Base-T RJ-45 ports connected to GigE

  switch Cisco 3560 (FastEthernet). WLC I LAG activated interface an ap - manager in the same network as the interface of the Manager. I have two FastEthernet with configuration switch cisco 3560:

  interface FastEthernet0/1

  switchport trunk encapsulation dot1q

  switchport trunk allowed vlan 3,10,40,70

  switchport mode trunk

  Speed 100

  full duplex

  channel-group mode 5 on

  interface FastEthernet0/2

  switchport trunk encapsulation dot1q

  switchport trunk allowed vlan 3,10,40,70

  switchport mode trunk

  Speed 100

  full duplex

  channel-group mode 5 on

  Interface Port-channel5

  switchport trunk encapsulation dot1q

  switchport trunk allowed vlan 3,10,40,70

  switchport mode trunk

  but on my WLC I status link down:

  Cisco controller) > show port summary

  STP Admin physical physical link link Mcast

  Type of PR Stat Mode Mode trap POE device status

  -- ------- ---- ------- ---------- ---------- ------ ------- --------- -------

  1 normal Disa down Auto Enable enable Enable n/a

  2 normal Disa Enable Auto down Activate activate s/o

  Please help, how to establish a connection between the switch and WLC.

  Nesha cordially

  Unfortunately, FastEthernet is not an option with the WLC4400s. They require 1000/Full interfaces or they will not come to the top. You must connect the WLC gigabit interfaces.

• I have a lg 4 k tv (40 "40UH630V TV LG ULTRA HD 4 K) with HDMI 2. 0 and if I buy apple tv 4 can be used with HDMI 2. 0 port or do I HDMI 3 port to use this? Please help me

  I have a lg 4 k tv (40 "40UH630V TV LG ULTRA HD 4 K) with HDMI 2. 0 and if I buy apple tv 4 can be used with HDMI 2. 0 port or do I HDMI 3 port to use this? Please help me

  You can use it with your TV.

• MacBook Pro USB Ports

  MacBook Pro my keyboard and wireless mouse work in my usb ports but I can't mount drive flash sticks? Do not display in the finder, but will be blink in disk utility then disappears?

  Flash drives show in disk utility?

  In the Finder > Preferences > sidebar > devices is verified external drives?

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Trying to connect a computer to the lan port Aiport Express "auto assigned IP address"

  I am trying to connect a computer to the lan on my Airport Express port. In preferences, it says "status: connected, Ethernet has an assigned IP address and won't be able to connect to the internet." Any suggestions?

  An "auto assigned" IP address indicates that your computer could not find or negotiate with a DHCP server to obtain an IP address appropriate for network access.

  It should be more on your network to provide assistance if you need it. For example, is the terminal of AirPort Express the only router in the current configuration of your network? What exact model do? What is the brand and model of your modem Internet?

• Port SSL messages to jabber/gtalk does not stick

  Hi-

  It is not purely associated with Sierra, as happening on El Cap.  The port default to Google talk is 5223, which is blocked in my company.  I had previously configured messages to use 443, which is not blocked (and supports gtalk).  But at some point during the last couple months, gtalk stopped linking to work.  When I looked at it, she returned to 5223.  When I try to set it to 443 (disable the account, change the port, re - enable the account) everything looks good, but at the time when I try to connect, it turns to 5223.  I tried to delete the account completely re - create, both as a right has Jabber (port 443 from the beginning of setting) or as a gmail e-mail account and then change the port later.  Nothing does.

  Thinking perhaps it was corrupted prefs, I deleted all the * prefs to iChat and everything that seemed related to google or jabber.  No change in behavior.

  Anyone seen this before?  Help to solve if possible of love.

  Thank you!

  Hello

  Currently I use port 5222 and without SSL and my account settings Google is for applications that are less secure.

  I can't use 5223 or even443 with SSL on.

  

  21:01 Tuesday; October 4, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• iPhone headphone output port IS not working do not

  helmet SE iPhone does not work. Bought new Apple earbuds and determined this is the port the atria. Phone is only a few months old. Help, please?

  This morning, I installed the last 6update iPhone: iOS10.0.2

  My headphone stopped working this afternoon (after a few hours of use).

  I couldn't understand anything to make them work again. Returned and the phone and the headset are working again.

  Update Nevermind the last version of iTunes Music *. Each update is a version longer than music/iTunes

• Lightning iPhone 6s port has stopped working

  I connected my phone to load as usual and he did nothing. Plugged into my Mac and iTunes doesn't. I tried three different lightning cables who all worked but nothing now. I tried to plug it into the wall charger usual USB and two Macs.

  In my view, that the port of lightning on my iPhone is damaged or dirty. I also tried cleaning electronic contacts spray cleaner on the connector of the cable and it out of the port by inserting several times. Also tried out blow out with compressed air in case it was just dust. Nothing has worked.

  Any help?  Should I bring?

  Thank you

  It seems to me you've done as much as you can and it would be good to have Apple to assess.

• air port utility

  Hello!

  I want to change the name of the base station and the password for it, and I use air port express 802.11n (2nd generation).

  The hard reset, soft reset in express air fitting is long so don't want to use it.

  Is it possible (using as book Mac - latest Mac OS Sierra air.

  Thank you!

  Hi there, tygb!

  Thank you for joining the communities Support from Apple! It's a big question about changing the name and the password for your base station. Read this article here with the steps to use 6.x AirPort Utility: change your base station name and the password. This will not give you to use the utility to make the changes.

  Have a great day!

• iPhone port 7

  This is my photo check ok iphone port 7 please are the pins ok but not folded

  Is something happening that is causing you to believe there is a problem with your port?

• A 'Powered USB Port' does not work on Mac Mini

  I have an external POWERED USB multiport block. When I plug the Superdrive into a Port powered on the unit, which of course is connected to my Mac Mini (2012) the Superdrive not even she acts as if it is connected and will not accept a disc. All ports are USB 3.0. I'm so uncertain that the Superdrive will work on any USB port other than the one on the Mac itself. Any advice? I El Capitan installed, but it has worked that way before the upgrade.

  This specific USB 3 hub? Not all work with the Mini

  Hub USB 3.0, attached to a Mac Mini does not work

  Re: Is there a USB 3.0 Hub that really works with the Mac Mini?

• iPhone 7 will not play audio via the USB port on the car.

  When I plug my iPhone USB port 7 more in my car (15 Jeep Grand Cherokee), the artist/song/podcast information appears on the screen, but the sound plays through the speakers of the phone.  I have confirmed that my settings are all the same as they were on my 6s, who played without any problems via the USB connection.  Bluetooth streaming works fine - no problems at all.  Any ideas, or is this a problem similar to that people have with CarPlay?

  Welcome to Apple Support communities, kevo.mac!

  Congratulations on your new iPhone 7 more! I see that you connect with your Jeep Grand Cherokee using the USB port. Everything seems to work fine, except that the music plays through the phone instead. I'll be happy to help you to get this working.

  Help to connect your iPhone, iPad or iPod touch with your car radio

  If you are using USB playback

  Restart your iOS device and your car.
  Connect your iOS device to another stereo USB port (if you have one).
  Try another USB cable.
  Update your iOS device.
  Install the updates to the firmware of your car radio.
  Test of audio playback from a different application. If you can not play audio from a specific third party application, contact the developer of the app for help.
  If you can not play audio from an app Apple, contact Apple technical support.

  Enjoy your weekend!

• If 2 Airport extreme can stay connected to each other using their LAN ports?

  Hello friends,

  I would like to know if 2 Airport extreme or 1 Airport Extreme and Airport Express can stay connected to each other using LAN ports at the ends? I thought this is the LAN port 1 connected to the WAN port on the 2nd.

  Thank you

  To clarify the issue and the scenario, one of my friend described a typical scenario in which there are 2 AEs. AE1 has an ISP in its port WAN and AE2 has a different ISP in its WAN port. This 2 AE can mutually connected between them by using ports LAN AE1 and AE2 ethernet cable? He said this could be feasible if AE2 remained in bridged mode, without using the ISP attached to its WAN port. I just don't get how this is possible. Friends of the search help.

  Thank you