Port port TCP 690 forwarding worked until all of A sudden, it works...

Similar Questions

• All usb ports not working do not all of a sudden on windows xp

  I have 5 usb ports, which worked very well and all of a sudden none of them work, I checked the status of them in Device Manager and all say working properly?

  Hi Backgammon167,

  The question you have posted is related to Windows XP and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.

  http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.WindowsXP.General&lang=en&CR=us

  I hope this information is useful.

  Concerning
  Rehman - support Micrsosoft

• Windows 7 on the right of my usb ports now do not work all of a sudden?

  Today everything to plug my mouse as usual, both of my USB ports on the right side of my laptop on the right side, all of a sudden didn't work, I tried to restart my computer 4 times but nothing has changed, I need help as soon as POSSIBLE because I ethier can't use my mouse and I can't use my keyboard and it is incredibly annoying to have to switch between the two , I also play fast games at the pace where I am not even able to play these games.

  Hello

  I'd like you try to uninstall the USB drivers.

  See the steps-

  (a) click on 'Start' and right-click on "computer".

  (b) now, select 'manage '. Choose "Device Manager".

  (c) expand "USB controllers" and right-click on the USB drivers one by one and select "Uninstall".

  (d) restart the computer and check.

  In addition, I would like that you download and install the latest drivers for chipset for the computer from the manufacturer's website. You can ask the manufacturer for assistance.

  Note: Install the chipset drivers are at your own risk.

  We know if that helps.

• HP Pavilion dv7-6b78us: 2 ports keyboard no longer work after replacing

  I replaced the keyboard on this laptop a few hours ago. When I got to the top, the two USB ports on the right side of the laptop don't work anymore.

  I have disconnected all devices from ports, uninstalled all the USB drivers, shut down, unplugged from power and removed the battery for more than 30 minutes.

  I've got it backwards, propelled the drivers installed, but the two USB ports were not always working.

  I checked the Device Manager to verify that there is no (!) ot (?) by devices.

  I did a system restore from a point I knew for sure they worked, which was five days ago. Still no luck.

  It's really not cool.

  If anyone can provide solutions, I would appreciate it.

  Sincerely,

  Tom

  The right USB ports are on a separate Board that plugs into the motherboard with a cable that runs under the keyboard.

  Manual

  See page 77.

  It is not impossible that you hit somehow the connection usb Board cable during the installation of the keyboard. I don't see any other explanation.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• all of a sudden... my computer does not see the things I plug into the usb ports on the front of the computer...?

  all of a sudden... my computer does not see the things I plug into the usb ports on the front of the computer...?

  If I shut down the computer and plug... he sees the thing then turned back...
  I can not just plug in while the computer is turned on... once again he has used to do this just as well... for some reason any, he sees things now.
  any thoughts?

  Hi KK Waddell.

  Thanks for posting in the Microsoft Community.

  I understand that you face the issue with the USB port does not work when you embedded on the front of the computer.

  Before you start the troubleshooting steps, I need the information required.

  1 did you changes to the computer?

  2 did you receive an error message?

  I suggest you to check with the other USB port.

  I suggest you to see the links and check.

  USB port may stop working after you remove or insert a USB device

  http://support.Microsoft.com/kb/817900

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  One or more USB devices may not work when you start your Windows XP-based computer

  http://support.Microsoft.com/?kbid=885624

  See also:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

• Error "" unable to communicate with your printer - this may be due to a firewall - check port TCP/UDP 139 is unlocked - reconfigure the firewall.

  "Unable to communicate with your printer - this may be due to a firewall - check port TCP/UDP 139 is unlocked - reconfigure the firewall.

  Original title: how to install the printing software to solve the error message?

  Hello

  Follow the troubleshooting steps in the following article and make sure that port 139 is unlocked:

  Windows Firewall may block some programs to communicate on the Internet after you install Windows XP Service Pack 2

  See also:

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  Note: Information provided in the article applies to Windows XP with Service Pack 3 (SP3) installed.

  If you use a third party firewall, I recommend you contact the software vendor for assistance.

• parallel port programmer (former type worked well in older systems) displys communication error.

  Hello my parallel port programmer (former type worked well in older systems) communication error displys in my last pc having the fastest perfomance.

  Hello

  Follow the steps in this link:

  http://www.Cypress.com/?app=Forum&rID=49672

  Let us know the results.

• port TCP 443 for anyconnect

  Hello world

  I need to open port router edge to allow the connection from outside anyconnect.

  you will need to confirm if I need to open port tcp 443 only on the router?

  or do I need to open port 443 as udp?

  Concerning

  MAhesh

  Mahesh

  By default the AnyConnect client uses TCP 443. But the AnyConnect client may also use DTLS (which provides the same type of authentication and encryption such as SSL, but uses UDP to do). There is not a standard port for DTLS, but I think there is an option on the SAA to configure a port so that it can use and you would like to open UDP port also.

  HTH

  Rick

• Hi, I have installed sqldeveloper - 4.0.3.16.84 - x 64 with JDK and tried to run SQLDeveloper.exe its does not work. A flash comes and goes. It worked fine until two days ago. Don't know what happened all of a sudden its not working. Need help.

  Hi, I have installed sqldeveloper - 4.0.3.16.84 - x 64 with JDK and tried to run SQLDeveloper.exe its does not work. A flash comes and goes. It worked fine until two days ago. Don't know what happened all of a sudden its not working. Need help.

  I use Windows 7 Pro.

  I have read other threads and tried to launch SQLDeveloper.exe from the CMD prompt, nothing is shown a flash comes and goes.

  Tried to change of SetJavaHome sqldeveloper.conf to the path JDK that it didn't work.

  Please guide me.

  Thank you

  Maybe there is a problem with SQL Developer, being able to write to the network share of desktop directory.  Add the following to your sqldeveloper.conf file to force the settings of the user to store locally also:

  AddVMOption - Dide.user.dir = some_local_dir_to_own_system4.0.3.16.84

  I hope this helps...

• Can you stop a user to move forward until all clickboxes one click if you use the PlayBar?

  Hi everyone, now I have a screen that requires a user to click on several clickboxes before the slide advances automatically.  Thanks to this forum it works fine.  However, with the playback bar they can simply click Next and continue this process. Is it possible to disable the next button on the playback bar until all the boxes in click are clicked?

  The deactivation is not possible, is to hide. You must use the variable cpCmndShowPlaybar of system. Its default value is 1 (visible). If you switch it 0, PlayBar is hidden. This can be done with an action simple (it is available in the drop-down list) to get to the slide where you want to hide the playback bar, you can do the same for the slide where you want to display again:

  

• Aspire V3-472PG touch screen does not work all of a sudden

  Hello

  I bought my acer aspire 472PG-V3-761R (with touch screen) a few months before. Recently, I noticed that the touchscreen wasn't all of a sudden. I have already read and tried some troubleshooting tips from the forums and on the internet, but still does not.

  I saw in the forum acer on how to disable the touch screen to see that if it has been disabled, while they inspected the Device Manager - Human Interface devices, there is no touch screen driver compatible HID?

  I've also updated my windows windows 8 to 10 about two weeks after I bought the laptop and the touch screen worked well after the update until this week.

  Please help me to solve the problem and solve it. Was it the update of windows 10? I have a warranty from the store where I bought it, but I still have to inform and bring it to the store.

  Thank you

  There seems to be a driver problem Windows 10, but I've seen a few that have the problem in point 8.1.

  If you have not done so, update the bios here. http://www.Acer.com/AC/en/us/content/drivers

• All of a sudden my hp 1018 printer has stopped working

  I have a HP 1018 printer

  I use window7 64 bit

  The printer works fine on this computer, but all of a sudden it stopped working. (no changes made to the front of the computer)

  When I run windows troubleshooting it tells me that all is well

  I tried to download and install the latest software several times, but it never ends the installation, he said only: "facility" for hours, but nothing happenes.

  At one point, I had an error in the spooler, but I get over a long time.

  Then the other day, after trying to install the driver once more, I'm suddenly endlesly was able to print a Word-dokument.

  But the next day, I still could ' t print.

  Today I tried to download and run your software: print and scan doctor. He told me that everything was good and same printet me a test page.

  But I am not able to print anything all programs (word, pdf, browser etc)

  I tried to uninstall the printer and install again. Nothing works.

  Do you have any suggestions on what to do next?

  Best regards, Mette Sørensen

  Try to STOP and RESTART your printer spoller. I see you have an error in the front.

  1. click on Start Menu

  2. right click on COMPUTER

  3. choose MANAGE

  4. click on SERVICES and APPLICATIONS, and then click SERVICES

  5. scroll down until you see Printer Spooler. Stop and then restart. Check the results and try to print.

• Disable a button until all the buttons clicked

  Hello

  I have a menu of 7 buttons on a slide that launch the .xml files from 'Success show script' and show the checkmark. I've got this works well, but I want the button 7, certificate, remain disabled until all 6 user buttons were clicked in order any.

  I wrote various advanced conditional actions, and I can't do things.

  I created 6 variables called topic1, topic2, topic3, etc., defaults to 0.
  

  The cert of the Action set to move to the slide but I was testing just the IF statement, it does not jump to slide either haha.

  What I'm doing wrong!

  Thanks for advance-METZ
  

  

  Yes, I explained that the first decision should look like in my previous answer.

  First decision "always."

  IF 1 is equal to 1

  Assign Topic1 with 1

  Show... or open a URL of what you wanted to do with the standard action

  Second decision ' CheckComplete

  IF Topic1 is equal to 1 AND

  Topic2 is equal to 1 AND

  ...

  7 turn on the you will need to disable start with, since you say that you do not leave the slide, this can be done with the action on enter

• then all of a sudden my photoshop does not work. It says that I need to renew the liscense? What should I do?

  then all of a sudden my photoshop does not work and I need it for my business. It says that I need to renew the liscence? what I'm doing. He said to reinstall but I moved and it was installed years ago.

  no idea where the discs are! Help?

  Hi Cynthiaw13595995,

  We will be happy to help you, but before that, there are a few information such as:

  What version of Adobe Photoshop, you bought?

  What is the exact error message/code if you found one?

  What operating system you are using the version?

  Until then, please visit the links below:

  The activation and deactivation of Adobe problems

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  "Activation limit reached" or "connection error impossible ' with Adobe applications

• Hide the button until all Conditions are met?

  Please help!  I am creating a forklift safety training module. There are 12 buttons on the first slide (see screenshot 1); However, only 11 are visible at the beginning of the slide.  The 12^th button is a "continue" button that appears only after all the content slides (slides 2-12) were considered by the learner.  I used a conditional action to hide the button (something I learned from @Lilybiri) until all the conditions are met.

  
  

  The problem:

  The "Continue" button does not always appear once the content slides have been read.  I found I can do appear to ebb in each slide content, show the slides a few seconds more before returning to the main slide- which seems certain conditions which tells Captivate to display the button "continue".  Of course, I don't want the learners to face to the challenge of trying to understand why they cannot continue. I just want to visit the pages relating to each key to all conditions met.
  

  
  

  Screenshot 1: the initial screen (actions related to the change of color of button below)
  

  

  
  

  Screenshot 2: chronology of the page main interaction

  

  
  

  Screenshot 3: conditional Action to display the button CONTINUE (created as a decision 2nd out of action of 'Transport').

  My expectation was that OnEnter, slide would be recognized as read and count for the condition that all 11 pages of content would be considered before that appear the continue"" button.  I set the time to s 3.0 (see screenshot above) on all content slides.  No transition, no effect.
  

  

  
  

  Screenshot 4: each slide content is returned to the slide main interactivity by an OnSuccess: jump to the command of the slide.  Nothing special here.  I tried to reduce all the content slides to 1.5 s nothing works.

  

  
  

  Screenshot 5: an example of the page interaction BEFORE all the content slides were read and before 'CONTINUE' button appears (ignore the footer buttons; it was just me to experiment with styles of button).

  

  
  

  That's a lot, I know.  I wanted to cover the entire base.  I would appreciate your thoughts and your expertise.  Thank you in advance!

  
  

  Michael
  

  How about what is probably very close to what you have already made... (After double checking all of your shares advanced for bugs)

  Each main menu button sets the variable 'consulted' 1, hides the active button, show visited button, then jump to the content. Alternatively, you can put the action on the close button for each slide as you did.

  Then in your main menu, you will have the conditional action on enter that verifies that each variable 'seen' is 1. If it is true, then it will show your button continue.

  I use this method with almost all of the modules that are non-linear. I use it to display a button quiz start, tab summary etc...

  To check your programming that I'm down in a text caption that has all the variables, you will have to look and make sure that they change to 1 as it should. As soon as something does not change probably you have found your problem. Also make sure that none of your actions changed to continue if you have accidentally deleted an object or something similar.

  Also BTW: If you want to increment a variable, you use the action "expression" rather than "assignment." If you keep just assign 1 to a variable, all that you will ever get is 1. example: If the variable = 7 and you assign 1 then now variable = 1.  If you use the variable expression variable = + 1 then you will be able to increment. Also be careful if a user visits an article more than once because it increments the new variable unless you have a control to see if the content has been seen before, and then past increment. Otherwise they could visit the same section 11 times and then have the button continue become visible.