port test pour sbRIO

I'm looking for a simple method to test lines of 9 ports of 10 bits, indifferently in input and output bit bit nominal: Port0/DIO0, Port0/DIO1,..., Port9/DIO9 a map sbRIO 9602

Is there a generic VI pour set up the lines of these digital ports, read, or write their logical state?

' E/s node' and 'Method of e/s' functions do not seem to give me access to these special ports for the parameters as inputs or outputs.

Hello

You can use the examples provided with LabVIEW for CompactRIO that may need you adapter; Pour them find:

Help / search of exmeples / CompactRIO / material/O / E/S basic

Kind regards

Tags: NI Hardware

Similar Questions

  • Someone has a vi for LCD with port COM for SBRIO

    Hi people,

    I have a SBRio-Board and you want to drive a LCD on the COM-port.

    Is this possible?

    Someone has a vi to do this.

    I know, it's possible with FPGA lines, but is not the normal/best way COM port?

    Greetings, Ruedi

    If you look on the LabVIEW tools network and search for LCD a few possibilities appear.  http://www.ni.com/np/app/main/p/bot/no/ap/lvtn/lang/en/pg/1/sn/n25:software, n21:28/sb/default /? q = LCD

    It is said expressly in the box to Reach tools that it is via RS - 232 interface.  Although not your specific device would it be worth the trip.

    Its interesting that I would have liked to have a few years on a project using a touch screen of Reach.

    There is also an example here http://www.ni.com/example/31079/en/.

    I hope that this will help.

    Warrior of wire

  • Explanations on lawless VMKernel & port management pour network configuration

    Hello

    When my money of VCenter configurations, I understand a little better connections in the VSwitches ports VMKernels and Managements of Port.

    Is this the same chosen?

    Thanks in advance

    Under ESX on was 3 types of ports/network:

    -Console of Service-> dedicated to the administration of the ESX

    -VMKernel: Used pour storage NAS and iSCSI-> allows you to Allocate an IP to the ESX

    -VM Network: Ream pour create the network of virtual machines

    Under ESXi, there is more service Console, everything is now in the vmkernel. 'Network management' is the name given to the vmkernel port created during installation of the ESXi and on which to active the ESXi management

    Eric

  • E/s and the issue of Communication for the sbRIO-9601

    Hello

    Our company is looking to use the sbRIO-9601 in an OEM application and I had two technical questions on the Board of Directors.

    (1) are the functions VISA support?  I saw there an RS232 port, I want to just make sure I can read/write easily out of it using prebuilt VI rather than do all the level low and starting from scratch.

    (2) we will be reading and writing of simple commands to a device coupled via the RS232 interface and based on the response, illuminating an LED controlled by the Board of Directors.  I have not selected any led and hoped that neither could provide some clarification on the limits of the power provided in the sbRIO-9601 user guide.  We will use the 3.3V output... I should put a resistor in line current limiting or I can put the diode directly between the output pin and the digital ground?  Us can drive more than 15 LEDs, however, we will never more than 3 see on at any given time.  I saw in the 3.3V section i/o of the documentation that the current max tested per channel is 3mA... but bus total is 330mA.  Is there a limit to how much we can provide each channel as long as we remain under the 330mA all together?

    Thank you

    Hi leachdor,

    (1) VISA functions are supported for the RS232 port on the sbRIO, so do not do any level low programming for them.

    (2) the maximum that we specify channel 3 is my.  You can combine several channels in parallel to increase this output up to 330 mA for the total bus.  Since you're only driving 15 LEDs and there are 110 channels of output, you should be able to combine some led.

  • Why isn't my port forwarding of the opening port

    I have the latest version of the 3 terabyte time capsule. I'm trying to forward a port so I can access my security cameras and it does not open.  My camera 100 port needs to be open and it will report as not open on any port test sites. Any ideas as to why, I use a static ip address of the server for the security system.

    Testing websites are useless... test by plugging actually to the camera from a device attached to a captive phone or a friend...

    Port forwarding works only if you have the public IP address on the Wan of the TC... and it's the only router in the network... is this the case?

  • Connect the sbRIO amulet monitor

    I have programmed my amulet display and have a VI RT on my 9636 sbRIO which must communicate with the amulet.  I have the amulet the sbRIO-related uses the USB port.   I also installed the software on my sbRIO:

    (1) NI-VISA 15.0.0

    (2) passport OR VISA-USB 15.0.0

    When I run the RT.VI, it is not the USB port on the sbRIO.  I guess I'm missing some software on the sbRIO but can not understand.

    Thank you

    Craig,

    To dispel confusion, you shouldn't see your amulet device in MAX, you should see the sbRIO. In addition, you cannot communicate via USB between the sbRIO and amulet device, but you can communicate over the serial (RS232).

    You are right in saying that you are missing on the sbRIO software because there is not a driver for the sbRIO use USB.

  • Ports are sometimes 'COM' and sometimes 'ASRL.

    I have a piece of code that search Active COM ports, tests for a connection, then uses this port.  The problem that I am running is that I am using this code on several laptops with Windows7 and for some reason any, that some laptops list ports COM1, COM3, etc, while others list people like ASRL1, ASRL3, ASRL5, etc.

    I did not yet understand why some use different nomenclature, but it throws out of my COM port program  I don't want the operators having to use a menu drop-down and select the port that this test must be entirely automated.

    Any ideas on how to solve this problem?

    Com references are aliases. Asrl references are canonical names. You can filter the resources to find visa to return either. I got what you use for your list?

  • Moving the sbrio 9606 FLASH files

    I'm trying to move files in main memory or flash my sbRIO.  I followed the example in this link just to find out where c: / is written in too.  It turns out that I can write only to c:\ni-rt\ and that works (c:\ does not seem to work). I am able to ftp by opening a Windows Explorer and tpying in ftp://adresseIP and see the file.  I guess I can use a FTP tool like filezilla to move my files in this site under my own directory and work with them.  This is to support the hexagonal flashing device and start with the files.

    But how you search for a file on the flash drive?  I saw a reference to d: /, but what is the ftp://adresseIP?

    I don't know there is a documentation on what I can't find it.

    Thank you

    -SS

    Hi Simon, shooting

    You try to access a plug in USB Flash drive plugged into the USB port of the sbRIO-9606 via the FTP client?  It is possible and is documented here: using FTP to access and use the external CompactFlash or USB on a real-time controller

    CompactFlash drives (if any) should indexes to drive D:\ letter and USB readers must index starting with the letter of player U:\

    If the documentation above is not what you are looking for, then I'm not sure what you're trying to do, or where you have a problem.  An FTP client must be able to navigate to files on the file system of RT, including something like Filezilla, Windows Explorer, the FTP client included in Measurement & Automation Explorer.

    See you soon,.

  • WAG160Nv2 v2.00.21 Port Forwarding

    Hello my problem is that I was not able to setup port forwarding.

    WAG160Nv2 Firmware V2.00.21 (I think that Schedule A)

    configuration:

    • only the port forwarding: all OFF
    • forwarding port range: 40000 to 54000 two PC ip protocols
    • PC connects with static IP below 192.168.1.100 from where starts DHCP server on the router
    • trigger port range: all OFF
    • QoS (Quality of Service): all OFF
    • DMZ: OF
    • Access restrictions: disabled
    • SPI Firewall / filters / block WAN requests: all OFF
    • VPN Passthrough: OFF
    • Isolation of the AP: OFF
    • NAT: WE
    • RIP: disabled
    • uPnP: OFF (I tried in combination with ALG)
    • IGMP proxy: OFF
    • SIP ALG: OFF (I tried in combination with uPnP)
    • already pressing reset for a long time after the firmware update, lost all the settings (the number of seconds that I have to press it? (I must have tried 30 +) Factory Defaults did the same thing?

    How I checked:

    • Transmission (torrent program): use uPnP or NAT - PMP router is DISABLED, use port = 40101, port test shows closed
    • Nmap Pei 40000-54000 - T4 - A - v 192.168.1.1 which gives «...» All scanned ports 14001 on 192.168.1.1 are closed... »
    • EDIT: also checked http://www.canyouseeme.org/ AND http://www.portchecktool.com/
    • EDIT: have you: netstat - LNP | grep 40101 on my PC
      TCP 0 0 0.0.0.0:40101 0.0.0.0: * LISTEN 26429/transmission.
      tcp6 0 0: 40101: * LISTEN 26429/transmission.

    Thank you very much in advance

    What is your internet IP address, tsester? I think that there is a double NAT on your network. If you get a private IP address, I suggest that you contact your ISP and your current subscription go to full bridge mode. Next, configure the router again based on the new settings and see if it will solve the problem.

  • P2415Q - no display on DVI, HDMI. No menu. Worked perfectly for a month on the display port

    Line of reason: Dell P2415Q. After a month, works perfectly on the display port, no display on screen Display Port or HDMI, no response to the menu buttons, backlight and power ON but no picture on the screen.

    Description of the problem

    The monitor worked out of the box for a month using the mini display port display port cable supplied with the monitor, which was plugged into my XFX 7970 and 7950 graphics cards. It supports 4K at 60 Hz and has been exceptional for photos, videos and games. Wednesday, the monitor no longer works, no picture or menu is displayed on the monitor. I plugged my old monitor to help diagnose via DVI graphics card even. When I press the power button on the Dell P2415Q monitor, the power LED lights up and the computer detects the monitor (as shown in the menu of the windows screen resolution). He defines as a secondary display but the screen remains black, I see the light power and backlight is turned on. No power save mode popup doesn't appear on the monitor, when I press the buttons of the menu there is no response from the screen, it stays black. I repeated with an HDMI cable, the same problem occurs without intervention or image. I repeated and disabled crossfire (which allows graphics cards to run independently) and tried the second graphics card without response. I tried the HDMI cable I used on my old LG monitor, it works well. I tried to connect a laptop on HDMI to the monitor too, no response from the monitor. I've exhausted all the tests I can think, I guess I'll have to return to the screen for repair or replacement under warranty. A question to the community - and dell rep is there anything else I can try / to make this work? 

    Monitor / computer details

    Monitoring of service tag:
    Computer: Non-Dell, build self about 2 years ago. Ivy Bridge i5, motherboard Gigabyte Sniper, 16 GB RAM, XFX 7970 GPU and XFGX 7950 GPU crossfire, 256 GB SSD, Corsair AX 860W (860W on independent 12V rails) supply power. Windows 7, 64-bit. (D2342 LG secondary monitor).
    Operating system: Windows 7, 64 bit.
    Graphics card: XFX 7950 XFX in Crossfire and 7970 (tested separately, product monitor fault at a time).
    Video card driver: 14.12 AMD driver Catalyst (restored to the old driver, always due to lack of product monitor).
    Video card output ports: tested with miniDP and HDMI on both cards, with crossfire enabled and disabled. Monitor product always loopholes.
    Cable video card: miniDP to DP cable supplied with the monitor. HDMI, tested with spare monitor to confirm it works correctly.
    Monitor Menu button: Inadmissible, what power is enabled on the computer detects the Dell P2415Q monitor, the backlight lights up but no image appears on the screen. By pressing the menu buttons produces no result - menu does not appear on the screen. Power LED is lit.
    Monitor purchase: purchased from Overclockers.co.uk March 2015.

    * Turn off the monitor
    * Disconnect all cables from the screen, including the power cable
    * Press the power monitor in pendant button 15 seconds
    * Reconnect monitor cables, then repeat the test. If still no go, your only option is to get exchanged by buying warranty
    * But first serial number must be transferred on your behalf using this form

  • No service after upgrade the server to 5.2 on El Capitan

    I have a web server that was doing very well until I left the 5.2 update suggested to install OS X Server. I can't get to broadcast web pages. Screen sharing works always and nothing has changed on the routers, etc.

    I restarted the server after the update and restarted the server itself several times but keep getting connection via a browser failures.

    I did the upgrade even on other servers as well as the upgrade of Sierra. This server is running El Capitan, and is the only one that gave me problems. 5.2 server is not compatible with El Capitan?

    Some additional info:

    I can connect to the server through ftp and other services; just no web service.

    Port tests show that port 80 is not blocked

    Using the IP address I can get to the window of the home server.

    Accessibility means no services available

    Websites is on and I can't find anything that is not defined in law or is different than before the update.

  • Apple heart rate monitors

    What is the HR of Apple from Garmin or Polar precision for cycling?

    Hello

    Consumer Reports tested the sensor frequency heart Apple Watch against their dedicated Recommendations cardiofrequence-meter and have 'no difference' between their reading:

    http://www.TechnoBuffalo.com/2015/04/27/Apple-watch-performs-well-in-consumer-re ports-tests.

    Apple has not announced any change in the sensor for the models announced recently.

    More information:

    Your heart rate. What it means, and where on Apple Watch you will find. -Apple Support

    https://help.Apple.com/watch/#/apdcf2ff54e9

  • Accuracy of the resting heart rate

    What is the accuracy of the new Apple Watch to record heart rate at rest?  This will be my main app for the watch.

    Hello

    Consumer Reports tested the sensor frequency heart Apple Watch against their dedicated Recommendations cardiofrequence-meter and have 'no difference' between their reading:

    http://www.TechnoBuffalo.com/2015/04/27/Apple-watch-performs-well-in-consumer-re ports-tests.

    However, note that Apple Watch, heart rate sensor and the included applications are not medical devices and are intended only for fitness purposes. They are not designed or intended to be used in the diagnosis of disease or other conditions, or to cure, mitigation, treatment or prevention of the disease.

    More information:

    Your heart rate. What it means, and where on Apple Watch you will find. -Apple Support

    https://help.Apple.com/watch/#/apdcf2ff54e9

  • What is the accuracy of the watch heart rate Moniter?

    My heart rate monitor Apple Watch occasionally reads too low was 30. When this happens and I manually check my pulse there is an important difference, which is that my pulse is 70.

    My question is, is this a fault of my watch or is it like that?

    Hello

    Consumer Resports tested the heart rate sensor against their dedicated Recommendations cardiofrequence-meter and can't find 'no difference' between their reading:

    However, Apple says that, even in ideal conditions, Apple Watch may not be able to record a reliable heart rate monitor each time reading for everyone.

    For best performance of the heart rate sensor, make sure you wear your watch sufficiently snug on top of your wrist. The collar must be neither too tight nor too loose, allowing room for your skin to breathe:

    For best performance during practices, Apple suggests you consider your clamping beforehand watch band and he loosen again thereafter.

    The sensor is likely to give better results for workouts that involve rhythmic (for example running) rather than the irregular movements (for example boxing). During all the training that involve bending your wrists (such as weight training, for example), it can help to keep your watch a little higher on your arm, the joint in flexion.

    Other problems that can affect the performance of the sensor include skin perfusion and tattoos wrist - see the link below for more details.

    Apple says that, if you encounter inconsistent readings, you consider your watch to connect wirelessly to an external heart monitor (for example, a chest strap Bluetooth) during the training:

    Your heart rate. What it means, and where on Apple Watch you will find. -Apple Support

  • Chronic Condition monitoring

    MyHeart rate is low, due to a congenital heart defect, I tried a FitBit and it is not as reliable as I want, what is the accuracy of the Apple Watch? I usually have a resting rate in the middle of the 1940s and sleep as little as 28-30bpm. I would market precision, but "tent" with a $300 device...

    Hello

    Consumer Reports tested the sensor frequency heart Apple Watch against their dedicated Recommendations cardiofrequence-meter and have 'no difference' between their reading:

    http://www.TechnoBuffalo.com/2015/04/27/Apple-watch-performs-well-in-consumer-re ports-tests.

    However, note that Apple Watch, heart rate sensor and the included applications are not medical devices and are intended only for fitness purposes. They are not designed or intended to be used in the diagnosis of disease or other conditions, or to cure, mitigation, treatment or prevention of the disease.

    More information:

    Your heart rate. What it means, and where on Apple Watch you will find. -Apple Support

    https://help.Apple.com/watch/#/apdcf2ff54e9

Maybe you are looking for

  • Shot on Photos in iCloud on Mac by mistake and lost all the photos on Mac - Help!

    Do not think, I clicked Photos in iCloud as it was checked, and then when I plugged in my phone, all my photos on my Mac has disappeared and a were replaced by the Photo library that I have on my iPhone. How can I get my pictures back? What I can? Th

  • How to install XP on Satellite L40-14B

    How to install windows xp on this laptop? I tried and I can't. Say that he didn't plant the hard drive.The hard drive is sata. In the Bios I have much choises. I wanted to switch from AHCI to ide... but I do not have it.I therefore now vista... is th

  • Myrio as a stand-alone system

    Hello comrades,. I was wondering if there is a way to use myRIO NOR as an autonomous Council with no PC, such as LabVIEW is installed on an operating system and the pogram works on it. I tried to read about embedded Linux NI real-time OS, but there i

  • Windows update website does not work

    Hello... I recently had a problem requiring a reinstall instead of XP Pro 32-bit to backrev to SP2. Basically I have been running SP3, but was constantly reminders, insistence, etc to update to IE8, and after continuous pressure, I finally said 'ok'

  • Hung up on the bad test page port (LPT1) and tail blocks to HP C4200 w/USB connect... will not erase

    Hanging test page to the wrong port (LPT1) and tail blocks to HP C4200 w/USB connect... don't delete.__How cancel?  Pls help.  TKS Ron Moore Ideas page: hanging in wrongly Test prt (LPT1) and tail blocks to HP C4280 w/USB connect... will not erase. H