Port USB of the Satellite L30 stop Windows when using

Similar Questions

• Problems with Benq DC C 700 digital camera on the Satellite L30 105

  Hello

  I have problems with my digital camera when I connect it to my laptop. Whenever I connect the camera to the laptop freezes and gives me the blue screen of death, in other words, the screen you get when a fatal error occurs, and then my laptop must be restarted. If this happens whenever I connect the two.

  I tried the bios update and install the latest orders, but nothing seemed to work. I contacted the support center in Benq and they told me to contact Toshiba as they are sure that the problem is not with the camera. So please someone, if you have any ideas or suggestions or solutions, I'll be happy to hear.

  Thank you!

  Hello

  First of all if you need Toshiba support, you will need to contact Toshiba authorized service partner in your country. This forum here is only a forum for users and you won't find anyone from Toshiba here.

  On the other hand;
  It seems that the Satellite L30-105 has been bundled with Vista. Using this operating system on the L30?
  I read on many problems with the 3rd devices, software, and Windows Vista.

  I put t know what said you, but eventually the software webcam is not 100% compatible with Vista.
  You should know that the BSOD appears if there is a serious hardware problem or software. I don t think that this problem was caused by a hardware issue and so there is only one possibility; software compatibility issues.

  In case you I would update the Vista of the State and I will ask manufacturing webcam if it s 100% compatible with Vista.

  Good luck

• I try to print to a port usb of a program back in windows 7 32 bit profitional

  I try to print to a port usb of a program back in windows 7 32 bit profitional

  Hey

  Try the procedure described on the site provided
  http://geekswithblogs.NET/dtotzke/articles/26204.aspx

  See you soon!

• How to change the brightness of the display on the Satellite L30-13?

  Hi, please someone can help me?

  I have a laptop Satellite L30-13, and when I use a stack the brightness for the display of auto, for not to diminish every time manually decrease is boring, that it is possible from a place to do this settings?

  And one more thing: this laptop he just shared graphic display with 128 MB shared memory and dedicated 128 MB or 128? !!!

  Thank you for you patience. (Sorry for my English).

  Hello

  Satellite L30 unknown to me, but as far as I know, on all models of Toshiba laptops you can change the brightness of the display by using the FN + F6 or F7 key combination.

  Satellite L30-13 does not exist, please check the description and please give us an exact description (PSLxxx). On this path, it will be easier to identify the model of laptop.

• Upgrading RAM on the Satellite L30 - 11 d

  My brother has a Satellite L30 - 11 d and he bought an extra 2 GB upgrade from 512 MB RAM.
  HE sent me an email - excerpt below, but does not have regular access to the Internet and so not the time of this post.

  My laptop has 512 MB of ram and Toshiba etc. told me that it could be upgraded to 2 GB. I got 2 x 1 GB cards installed.
  The problem is that if I remove the 512 MB card, the laptop does not see the Go cards at all, so I put the card 512 back in and it was OK, so I put a 1 GB card in and it worked OK, thinking it might be a loser card I have triedthe other cards plus the works of 512 and this.

  Also, if I put one of the GB cards on their own that work.
  According to Toshiba, the computer can be upgraded to 2 GB of RAM - so what I am doing wrong.

  Any ideas would be appreciated. »

  Hello

  I googled and found this page of specification of Satellite L30 - 11 d:
  http://UK.computers.Toshiba-Europe.com/innovation/JSP/SUPPORTSECTION/discontinuedProductPage.do?service=UK&com.broadvis ion.session.new = Yes & PRODUCT_ID = 128130

  According to this page, the satellite L30 - 11 d can be upgraded to 2 GB of RAM (2 x 1 GB)
  You must use the RAM (533 MHz) DDR2 200pin modules.

  I think that the laptop doesn't recognize the 2 GB of RAM due to compatibility issues you should try the modules of RAM from another manufacturer. Maybe Kingston would be ok.

• Satellite L30 - no sound when I add the additional speakers or headphones

  IHA.

  I have the Satellite L30 and was recently completely restored.
  Now, I have a problem, however. When I add additional speakers or you are trying to use the headphones, no sound on their part. I think that it is a problem with the laptop to actuall because I tried headphones in my iPod and they work fine and I tried the speakers with my office that worked well. Is this some sort of setting? I have no idea.
  Help, please!
  Thank you for taking the time to read this and help me.

  Hello

  Have you used the Toshiba Recovery disk?
  What operating system do you use?
  You update the audio driver?

• How can I change the key of a lunch without losing the words in my karaoke VanBasco window when using cakewalk pro audio.

  Original title: Using cakewalk pro audio

  How can I change the key of a lunch without losing the words in my karaoke VanBasco window when using cakewalk pro audio. Can anyone help please

  Hello

  What operating system is installed on the computer?

  Contact Cakewalk for assistance:

  Here is the link: http://forum.cakewalk.com/default.aspx

• The Setup program stops working when you try to uninstall the installer of qwest

  the Setup program stops working when you try to uninstall the software

  the Setup program stops working when you try to uninstall the software

  Hello

  Try uninstaling with revo uninstaller (download the trial for the link.)

  link

  Use the advanced uninstall, method, delete the associated files and reg keys.

  Good luck

  Chyavan

• What is the best way to export when using text? Thank you

  What is the best way to export when using text? Thank you

  Hi Noa,

  Is that what you want to do with your movie? If you watch the Clip export options, you will see that we offer several ways to export your video.

  There is really no particular setting when your movie Clip contains text.

  Let us know what you are trying to accomplish.

  Best,

  Peter Garaway

• Satellite C660 - the mouse pointer stops working when you start program

  Some features:
  Toshiba Satellite C660-1r1
  Windows 7 sp1
  Avast Antivirus (free version)

  Problem:
  When I start a program (for example. Sonos controller) on my laptop my mouse pointer stops working. It does not happen with all programs! When I go into Device Manager, my synaptic touchpad and my hid mouse is working also. When I press ctrl - alt - del, the pointer can move again, but when I come back it stops again. I have a work around is not a solution

  When I disconnect my windows account and log in again, it will solve the problem. When I start a program again the pointer will freeze up again.
  I did a complete system of virusscan and a pre start virusscan and my laptop is virus-free.
  I uninstalled the mouse and in drivers reinstalled synaptics them but that has not worked. I added a new account windows but that did not work.
  By pressing the keycombo FN + F9 has no effect.
  I am somehow at the end of my ideas...

  Can anyone help!

  When I start a program (for example. Sonos controller) on my laptop my mouse pointer stops working. It does not happen with all programs!

  This problem happens using the touchpad only or have you noticed the freezing of cursor using the external USB mouse too?

  What is the notebooks touchpad works properly without loading and using this 3rd party software?
  For example, work the touchpad with Microsoft office (Word, Excel, etc.) or navigation in internet by using IE or Chrome?

  My guess is that the pre-installed 3rd application part could affect the functionality of the touchpad.

• Toll-free indicated what power disconnected from the Satellite L30-134

  I don't know it this the appropriate category, because I'm not sure of the source of the problem.

  Okay, here it is:
  I have Toshiba Satellite L30-134.

  Normally, when I unplug the cable of the AC adapter, 2 things happen:
  1 ATP icon shows that the current generator is the battery, and it shows invoiced % and about working time remaining before the battery is empty.

  2. the power management becomes more energy saving settings, and implementation Hibernate just until the battery is completely down.

  Well... Last few days things have changed:

  Now, when I unplug the power cable, the system does not recognize this and she continues to display: ' course Power Source: AC Power ', for the remaining capacity of the displays: "S/o" and the system is not hibernate, because he does not feel the difference.
  I'm not sure that this has something in common, buy, I found that the UPS SERVICE has been stopped, I tried to start it manually, but there is ERROR 2481: the UPS service is not configured correctly.
  Need help, please :-)
  OS: Windows XP, automatic updates, I did not notice if this happen after installation or any other measure of speciffic, I did...

  > Normally, when I unplug the cable of the AC adapter, 2 things happen:
  > 1. ATP icon shows the current generator is the battery, and it shows invoiced % and about working time remaining before the battery is empty.
  > 2. Power management becomes more energy saving settings, and implementation Hibernate just until the battery is completely.

  This process is correct. After disconnecting the AC adapter the laptop switches to the battery power and uses the Toshiba power saver mode the power created for the use of the battery.

  > Now, when I unplug the power cable, the system does not recognize this and she continues to display: ' course Power Source: AC Power ', for the remaining capacity of the displays: "S/o" and the system is not hibernate, because he does not feel the difference.
  > I don't know he has something in common, buy, I found that the UPS SERVICE has been stopped, I tried to start it manually, but there is ERROR 2481: the UPS service is not configured correctly.

  Well the ups (uninterruptible power supply) service could be responsible for this problem!
  If you are not able to start it manually, then it might be a problem with OS software.
  I studied a bit and found this article in the Microsoft Knowledge base about this problem.

  + Cannot start the UPS Service.
  http://support.Microsoft.com/kb/310437

  Good bye

• Cannot start OSs of HDD external USB on the Satellite NB10t-A-101

  I'm unable to install Linux on the Satellite NB10t-A-101, because it does not allow to boot from USB or install other OSs.I tried to circumvent this way: (it came with pre-installed Windows 8).

  (1) turning off SecureBoot (which I did)
  (2) putting USB at the top of the list of starting the computer.

  But it does not work.

  I have two HDD USB (a TPG, the other normal) partitioned and it s impossible for them starting with this model of Satellite. I m thinking to return it back to the store that I need to install/start several OSs.

  Hello

  Great that you are using Linux on your PC!

  You mention that you have disabled the secure boot.
  It is very good. But you don't say anything about the startup mode and nothing about what Linux you try to start.

  Most of the distros must support UEFI but that can't be true for each of them.
  If you want Win8 dualboot with a Linux distro, so you need to active UEFI and able to start in this mode distribution.
  If you use a late clone-Ubuntu, Fedora or OpenSuse, you should be fine!

  Another clue could be to take the USB key and try to start another PC from him.
  Which will give a clearer picture of where the problem lies: on your key or the compatibility of firmware NB10 & distro Linux of your choice.

  If you try to boot from a USB - HDD, I'm afraid I'm a bit at a loss as I've never tested.

  I hope this helps!

  Tom BR

• Strange problem with ports USB on my Satellite A300-243

  Hello

  I have the following problem. So far, I have 4 USB ports, and only my USB key and key to my friend works there. All other USB keys (I tried mby 20 different ones) does not work: aks for, pilot research, etc...

  I spent many hours together in the internet search, but I didn t find a USB driver, but I don't even know what I'm looking for. So please, I would be very happy if someone could help me with this.
  And I forgot: other devices do not work too. I use it y of the mouse, but it only works in the USB port on the left. Safely, he asks for driver...

  Thanks in advance.

  Hello

  Normally you n t need a driver for USB. On XP, Vista and Windows 7 the stick will be automatically installed and no driver is no longer necessary.

  Can you please tell us what OS you are using? This happens with the factory settings or you have installed another OS?
  You should try with the factory settings and update the chipset driver. You can find it on the Toshiba site. In addition, updating the BIOS could also be helpful.

• How to recover the Satellite L30-140 - I lost the recovery disk

  Hello

  I have a Satellite L30-140 and I want to recover the windows on that.
  I lost the dvd recovery-. -.
  Is there a method to recover? as acers Alt + f10 recover menu?

  Thanks for your help :)

  Hello

  You need the recovery disc, either the clean Microsoft Windows disk in order to install the operating system gain.
  L30 being a little older, I doubt that you can order the recovery disk
  That's why you need a Microsoft Windows CD!
  You will need to buy this CD if you are not the owner of the Microsoft Windows CD.

  Welcome them

• Update of the Satellite L30-105 display pilot

  Could someone give me an idiots guide on how to upgrade a display driver for my Satellite L30 - 105 (PSL33E) Please?

  Laughing out loud. You need a guide to the fool? Come on man ;)
  OK, here is my guide;

  Download the graphics driver for your model of laptop.
  Unzip the package.
  Access to the Device Manager, then mark the graphics card driver update.
  Then a new window will open.
  You must use the second advanced option.
  Then choose the option called Don t research. I will choose the driver (or something like that)
  Point to the place where the driver package was stored on the HARD disk and complete the installation.

  Welcome them