Portable window 8 remote control problem

Similar Questions

• Portege M800-PPM81E - installation of remote control problem

  Hello guys,.

  I have a problem to install the remote on this laptop.
  First the winbond CIR driver does not work, I try on different OS... the same message... "There is a problem with this Windows package install."

  A program run as part of the Setup did not finish as expected. Contact your supplier of staff or the package of support ".
  I've now installed Vista x 64... doesn't work.

  Thank you
  M.G.

  Hello

  Remove the old software on the remote control of the system.
  Then, visit the page of European driver of Toshiba and download the drivers and tools.

  On the Toshiba page I found the Remote Control Manager v.2.4.0.1. This driver is required for the remote control work.

• Qosmio F20-130: (infrared) remote control problem

  Hi guys,.

  got a little problem which I think I've seen on this forum before. My remote no longer works. Used to work properly. Now, with the laptop turned off and connected remotely, I can light up the lap top. However, it does nothing else. If I press a button, the red light on the remote flashes and the Red led on the receiver will Flash but nothing seems to happen.

  I checked in device manager and I have tried using another USB cable to connect the infra-red receiver. Any ideas on what could be the problem? There is no secret key which I pressed by accident is there which disables the remote control?

  Dave

  Hello

  I put t know if it helps but try to remove this command remotely in the Device Manager and unplugged the unit. After the new trial to restart to connect the remote control again.
  In addition, please check the batteries. I know the flesh of lights but nevertheless check.

• Pavilion DV7 - 1038ca Windows 7 - remote control does not

  Hi all

  Because I updated the OS to Windows 7, the remote control for windows media center does more work. I am now running a windows 7 Ultimate 64B on a Pavilion DV7 - 1038ca.

  I read a lot of posts and so far I have found this:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=PV-78236-1&LC=en&DLC=en&cc=us&... but it doesn't seem to work for me as an error (9996).

  Is there something I can do?

  Thank you.

  CATA

  Simply because the tension seems ok doesn't mean it's all good, if it's heading 2006. Current stored in batteries, it's what makes their work.

  Kind regards
  ERICO

• DMM 5.2.1 remote control problem

  Hey, I'm in the process of establishment of interpreters.  the skin I selected shows three icons.  1. video on demand 2. Electronic Program Guide 3. live TV channels

  Unfortunately, I'm not able to select whatever it is with the remote control (this isn't a remote color red/yellow... buttons)... remote control black regular came with the monitor lcd 32' ccisco. How to do this. I noticed that a few threads on this forum that relates to the color setting. a few buttons I see on the remote's (AV, food, entrance, sleep, psm, arc, auto, then numbers, menu, exit, together, mute, up, down, left, right)

  Thanks in advance.

  Vijay

  Vijay,

  Distance black, you have to control Cisco LCD, you must order the remote DPM in order to control the module CAST the number of room DMP-RM-K9 = (Digital Media Player Remote alternative)

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-margin : 0 ; mso-para-marge-bottom : .0001pt ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ; mso-bidi-font-family : « Times New Roman » ; mso-bidi-theme-font : minor-bidi ;} New remote (4310) reference:
  http://www.Cisco.com/en/us/partner/prod/collateral/video/ps9339/ps7220/data_sheet_c78-625677.html

  New remote (4400) reference:
  http://www.Cisco.com/en/us/partner/prod/collateral/video/ps9339/ps7220/data_sheet_c78-480272_ps6681_Products_Data_Sheet.html

  Sagar Dhanrale

  Cisco Systems

• remote control problems

  I'm trying to control a presentation Keynote on my Macbook Air to 2015 with an iphone 2015 6s.  Both devices have updated to OS and Keynote software.  Keynote on the Macbook is set to "enable remote" and he found the iphone.  But the iphone can't find the Macbook.  He just continues "looking for Macbook.  Both devices use the same residential Wi - Fi network.  Any suggestions on where to look the problem?

  It's the definitive method for the configuration and use of Keynote Remote: Keynote Remote using

• H5360 projector remote control problem

  Hello!

  I bought a used projector that has the remote unworking. However, he sends IR pulses when he looked through the lens of the camera. So the fault seems to be in control/receiver of the projector unit.

  I measured the RS232 port after not being able to use it with Arduino and got these readings during the measure against VGA-land:

  -Left male (TX):-8, 80V

  -Down pin (ground): 0V

  -Straight male (RX): 0V

  My guess is lack of head of Orchestra/component. Does anyone have a good idea how to continue now?

  I have experience with electronics and I plan to continue the component by component from IR LEDS and RS232 port that very probably lead to the same circuit.

  I am unable to provide recommendations on how you can fix the problem, you declare yourself. If you feel that there is a hardware problem with your projector, I recommend that you only contact warranty support in your region.

• I can't see or access my saved PDF files (or icons) in my files or on my desktop of 64-bit windows 7 (catalyst control problem?).

  The only time where I can see them is when I'm about to save an another PDF to a file or to the desktop during 'save process' in which it contains some saved PDF files.

  I tried 'show desktop' and opening adobe reader to see the files or icons, but they will not show.

  I have a new HP computer with windows 7 64-bit and windows has failed twice. Time just after the new facility, just before I was able to create the rescue and then disk after two weeks of use; telling me to re - install! Now, months later, I have Catalyst Control Center errors / problems. So I don't know if it's all the partners. Should I reinstall windows and hope my rescue disc work?

  Maybe I should have asked "how to get a free replacement for a windows 7 lemon?

  Hello

  ·         Since when you are facing this problem?

  ·         Did you change your computer before this problem?

  Method 1:

   

  I suggest you to search for the problem in safe mode and see if it persists.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2:

  I suggest to change the save location and check if it helps.

  Method 3:

  I suggest you run Chkdsk and see if it works.

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Note: Make sure that you take a backup of your data before performing the check disk on your computer.

  Method 4:

  I also suggest you to check user account again and see if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

• Toshiba SD - 63HK Home Theater system with remote control problem

  I have a Toshiba SD-63HK home theater system. Suddenly, the remote doesn't work this morning - I changed the batteries and it has no effect. Also tried again taking the DVD Player off the coast of the socket and of suite, and this doesn't have to do anything too. Someone at - it ideas? Everyone knows about similar problems with this system?

  Guess what; you are the first user of this forum that opened a thread on the Toshiba SD - 63HK Home Theater

  This system multimedia isn't known to me, but if your remote has stopped working and the batteries are not the reason for this problem; Then, there must be some kind of hardware malfunction.

  Maybe you can order this remote separately try to search on the internet for this part

• Qosmio X 300 (Windows 7) remote control

  Hello everyone.

  I tried to get my remote to work for my Qosmio x 300, but I can't seem to get anywhere. I looked around to see if I could get answers and I couldn't t cross with something useful so far
  The site seems to lack on the drivers for the remote controller (Windows 7) for the X 300 series, always tried to use those (for Windows Vista & Win7 X series) none of this seems to work.

  I would really appreciate a solution for this.
  Thank you.

  > No idea why they do not appear before...
  > In any case, works fine now. Thanks anyway = D

  :) Thanks for your comments!

• Installation of the remote control problem

  Hello
  
  I want to install in the rcu on linux, so I went to the rcuhome/bin path and then run the command. / rcu (TI throwed the error "undefined DISPLAY.
  Set the DISPLAY environment variable, and then run again. »)
  
  so I tried to adjust the display as: $ export DISPLAY = 101.23.100.1:0.0 and checked in the env, it displays the same thing.
  
  but after setting the display when it run the same command again. / UCR he throwed error as below:
  
  Failed to initialize the recorder with location: /apps/OBIEE/Software/rcuHome/rcu/log/logdir.2012-01-06_12-36/rcu.log
  The initialization of the journal using the following location: /tmp/logdir.2012-01-06_12-36/rcu.log
  Exception in thread "main" java.lang.InternalError: can't connect to X 11 window server using '101.23.100.1:0.0' as the value of the DISPLAY variable.
  at sun.awt.X11GraphicsEnvironment.initDisplay (Native Method)
  in sun.awt.X11GraphicsEnvironment.access$ 100 (X11GraphicsEnvironment.java:52)
  to sun.awt.X11GraphicsEnvironment$ 1.run(X11GraphicsEnvironment.java:155)
  at java.security.AccessController.doPrivileged (Native Method)
  to sun.awt.X11GraphicsEnvironment. < clinit > (X11GraphicsEnvironment.java:131)
  at java.lang.Class.forName0 (Native Method)
  at java.lang.Class.forName(Class.java:169)
  at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:68)
  to sun.awt.X11.XToolkit. < clinit > (XToolkit.java:89)
  at java.lang.Class.forName0 (Native Method)
  at java.lang.Class.forName(Class.java:169)
  in java.awt.Toolkit$ 2.run(Toolkit.java:834)
  at java.security.AccessController.doPrivileged (Native Method)
  at java.awt.Toolkit.getDefaultToolkit(Toolkit.java:826)
  at com.jgoodies.looks.LookUtils.isLowResolution(LookUtils.java:484)
  to com.jgoodies.looks.LookUtils. < clinit > (LookUtils.java:249)
  to com.jgoodies.looks.plastic.PlasticLookAndFeel. < clinit > (PlasticLookAndFeel.java:135)
  to oracle.sysman.assistants.rcu.ui.InteractiveRCUModel. < init > (InteractiveRCUModel.java:117)
  at oracle.sysman.assistants.rcu.Rcu.execute(Rcu.java:292)
  at oracle.sysman.assistants.rcu.Rcu.main(Rcu.java:344)
  
  
  any help?
  
  Thanks in advance

  Hello
  Yes, 100% you must have privileges to SYS. You cannot proceed without it. When you run the rcu utility, it will ask for db host, port, sid, SYS username, password. NOW, this remote is a great giant sql Script (s), which creates schemas, and Tablespaces, users, Tables, views, sequences, etc.. Regional coordinating unit must therefore details SYS. Some people will try to manually create these 2 patterns such as bi_platform, bi_mds and try to run the RCU. But it won't work.

  An option is, give the UCR Zip file to your SYS DBA self-introduction. Give him instructions. As unpack it and run the rcu.bat file. Its very simple. It takes about 15 meters. Procedure step by step, you can and let DB guys to do themselves.

  And Yes, you can run the RCU from any operating system like Windows or Linux. So in your case use Windows. All you need is db host, port, sid, user name, password for SYS SYS. That's all.

  Thank you
  Ravi Jegga

• 1700 MXP not respond remote control

  Hello

  One of my clients has problems with their codec MXP 1700.

  It no longer meets the remote control. They tried another remote of an edge 95 MXP that does not work either.

  The two remotes work with the decision of edge 95 MXP on batteries or a remote control problem.

  The remotes are the two TRC 4.

  I checked the deployment guides and admin and it says that the only way you can tell a MXP stops responding to the remote control is to Kiosk mode and select this option. The device is not in Kiosk mode.

  I have RMA had the codec. They have received a new and configured it but they have exactly the same problem.

  Here, any help would be greatly appreciated as I really don't want to have to do another RMA.

  Thank you very much

  Luke

  Check the following to ensure the functioning of the TRC4 remote:

  Control Panel > Menu Settings > KIOSK MODE SETTINGS > ALLOW the USE OF THE remote CONTROL: WE

  Control Panel > Menu Settings > KIOSK MODE SETTINGS > KIOSK MODE: OFF

  Once you have confirmed that ALLOW USE OF REMOTE CONTROL is enabled, you can use the shortcut key to activate the Menu.

  • Press the phone book 5 times and then press 2.  You should now be able to navigate in the menu of the MXP using the remote control.

  You can also increase the remote control IR signal, if necessary.  To access the switching of IR signals, you need to remove the cover of the batteries and batteries (see attached image) on the remote control.

• long-lasting problems after windows scammersr had remote control of PC

  I got Asian male phone call to the effect that I had serious problems with a virus on my computer. He claimed to be the appeal on behalf of Microsoft Windows. Is not not in computer, I followed a number of directions to him which eventually led to him have the remote control of my computer. The number of callers evil disguised alarm of "oh my God" etc the alleged problems he has discovered and when the purpose of the payment was raised, I ended the call. The call lasted about 40 minutes, and he had the remote for about 5 minutes. It seemed to me that it was associated with a site named PC technocrat. My fear is now that he can have some future remote access or caused other problems that I have not yet thought.

  Unfortunately, once you give someone the remote control of your PC, they can do whatever they want.  There is no way for you to know what they did or did not.  You must assume the worst - they left behind software that allows them to take control of your system and/or take all the information they want it without your knowledge, and that they took any information they wanted while being connected.  Then contact the banks and other institutions in finaicial you do business with and take steps to protect your accounts and your credit cards.  Next would be to save only essential or element files and documents such as photos, music, etc and then destroy your computer and restore to factory new.

• Problem with remote control in Windows 7 Ultimate

  Hi guys,.

  I encountered a problem since I upgraded my HP Pavilion Elite m9651me from VISTA to Windows 7 Ultimate 64-bit

  the remote control has stopped working & I tried to look for a solution but no luck.

  Please can you help me with this problem

  Thank you.

  Published by looks on 02/11/2009 04:51

  Hi Jajomafa,

  My problem was resolved a few days ago.

  There was that an update of microsoft scored an important in the updates of windows, those I have installed my remote update started woking as if it were before.

  The name of the update was (AVerMedia AVerMedia - Streaming Media and broadcast devices - receiver consumer infrared)

  I suggest that you run the automatic update.

  I hope this helps.

  Kind regards.

• Windows 8 on HP TouchSmart IQ826t (including REMOTE CONTROL) successfully installed

  Here's the background.  I have a TouchSmart IQ826t running Windows 7.  I have installed on it, (same partition), Windows 8 RTM using a DVD.  The installation went without a hitch and Windows 8 is installed.  I've had two disappointments: 1) the possibilities of contact not only that it was very difficult to slide on the screen side and the only way to scroll from left to right was to use the scrollbar at the bottom of the screen.  (2) turner of the TV does not work, but I am hopeful that it will be the 26 Oct when Microsoft releases the Media Pack.

  Thus, the question that I continued to work on was the touch feature.  I came across an update from HP that I missed for Windows 7 called "NextWindow 1950 Touch Screen Driver Update", which was to improve the answer touch near the edges of the screen and resolved a problem of sensibility in the upper right of the screen.  I downloaded it, (sp49787.exe) and tried to install it.  He would not have installed.  However, the part "NextWindow 1950" of the title was a clue.  I have been looking on the NextWindow site last week and I remember seeing a driver Windows 8 touch screen on their Web site: http://www.nextwindow.com/nextwindow_support/Windows_8_Touch_Screen_Driver.html

  I took a chance and downloaded.  Before you try to install it, I created a new system in case restore point where and then installed.  The installation has maybe 4-5 minutes, but he reported that he managed.  Without having to reboot, I checked the tactile ability and WOW, it works now as my 7.5 Windows phone with lots of scrolling left and right as well as perfect sliding on the side of the screen!  Just to be safe, I restarted and everything works great!  Thus, it seems that the driver on the link above is the solution at least for my model.

  Chuck

  I found how to get the HP Remote to work with my IQ826t! I was reading something and it reminded me that I had never gone through the list of Services on this computer. I found a service that has been extinguished called, 'Human Interface Device Access. I changed the properties of it from manual to automatic. Rebooted and WOW, the remote will now control the Volume, Mute and other functions, he was ignorant. NOTE: Before I tried this service I also found a service called "HP Software Framework. It was also well manually. I changed it to auto - delayed, but I don't think that this has nothing to do with the question. First try the service of Human Interface. I rebooted several times and the remote control of the TV still works. YES!