Portable wireless optical 3000 mouse left click is totally insensitive
Original title: Wireless Notebook Optical Mouse 3000
I deleted and reinstalled the devices. System says it all works fine, yet my left click of the mouse is totally insensitive. Please notify.
Hi Putterboy,
You can consult the following KB articles and check if it helps.
Troubleshoot the incidents of the response to the mouse or wireless keyboard
http://support.Microsoft.com/kb/838398
Troubleshoot a wireless mouse that does not correctly
http://support.Microsoft.com/kb/321122
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Tags: Windows
Similar Questions
-
Have a new laptop with Windows 7, ASUS Intel-i5. Initially, the automatic installation of my Wireless mobile mouse 4000, which I had used with XP, has worked. Only problem was that the mouse was stubborn, when you attempt to left click: i.e. get something - and persistence was needed to get there. Now I can not at all to a left click. Tried all resolution of known issues, left click procedures still dead in the water.
Anything with moving parts end up by wears. I've had several byte the dust. Speaking of the dust, maybe the dust and mold were inside. Invest $4 and find out.
-
Major problems mouse, left click acting as a click right, very annoying!
Hey guys I have a very annoying problem. I read about it online as other people seem to have made the experience, but there is no real definitive answer. On rare occasions, my mouse will be funny. When you press the left button, it will act as the right and the right button will continue to act as the right one. When you go into the settings of the mouse, even if swap you them around her still acts as if there are two right click and left click No button. I tried a number of suggestions elsewhere on the web, including re-starting my pc several times, trying to update windows, turning off the mouse, re - install, using a different mouse etc... No matter what I do, the problem persists.
The only way to get the return to normal of the mouse is either to turn off the pc and leave it a few hours, in which case even sometimes that does not work. The only other time he rectified himself is in itself. Sometimes it will just fix itself without doing you anything for her.
I'll be very grateful for any advice that anyone can give. Does anyone else have this problem? Anyone know anything on this subject? Thank you
BTW my system info: Windows 7 Ultimate 64-bit, processor AMD Athlon X 2 2.2 GHz, 4 GB Ram, disks of XFX - MI-A78U-8309 M/B, a few SATA, Logitech MK300 wireless K/Board of Directors and the mouse.
Salvation;
Can you go start\control configuration\systeme and security\Administrator Tools\Event Viewer
Please check if you have any error in Applications
as to publish here or visit our website with the error number to search for
Thank you.
-
HOW TO CHANGE THE MOUSE 'LEFT CLICK' TO 'RIGHT CLICK' HOTMAIL CHECKER?
How can I change the left click button (on the spelling, in Hotmail, you must press the left key) I would change it to the correct key? Please tell us how? Thanks again
Hi tontotwo,
Unfortunately, this is by design of the Web site and is not possible there's change of clicks of the mouse from left to right.
However, you can post your request in the Hotmail support forum using the link below.
http://www.windowslivehelp.com/product.aspx?ProductID=1
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
My mouse left click does not work in certain areas of frefox 10.0. Help
In some areas of Firefox 10.0 left click on my touch pad does not work
The extension of the Yahoo! toolbar and the extension of Babylon have been reported to cause a problem like that. Disable or uninstall the modules.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
-
Microsoft Comfort Mouse 3000 mouse wheel click on the problem
Hello
I just got this mouse today and really like the shape and the weight of it, however I have a major problem - click wheel mouse only works to a certain (very uncomfortable angle) and even in this case, not all the time. I installed the drivers and all...
.. sure you can not help me with anything whatsoever, so I'm going to exchange it for a different mouse to the store in the next few days, unless the problem disappears
.. That's all :(
Hi pas0003,
If it works, try the steps and check them off below.
(a) check the connection of the mouse. If the mouse is connected via a USB port, make sure that the cable is not loose. Push the USB connector to make sure it is sitting comfortably. If the mouse has an older serial port connection, make sure that the connector has not become loose and check the pins of the serial port for any signs of damage.
(b) plug the mouse into a different port on the computer and test. The port may be damaged or the computer can recognize is no longer the mouse into this port.
(c) inspect the cord of the mouse for signs of damage and make sure that the cord has not broken loose from the end of the USB connector or the mouse itself. If the mouse wire has been broken or the wires are are spare at each end, the mouse may need to be replaced.
(d) clean the mouse. A mouse that uses a ball to track needs frequent cleaning. Unscrew the plastic ring on the underside of the mouse in the direction indicated by the arrows on the mouse. Remove the mouse ball and clean the ball and inside the mouse, paying special attention to the small roller inside the mouse. Use a cotton swab or a clean non fluffy towel and a small amount of rubbing alcohol. Let the parts dry, then reassemble the mouse. It should run more smoothly.
(e) check the mouse settings. Click on the 'Start' button on the computer, and then click "Control Panel." Depending on the operating system, you may need to click "Settings" first go to the "Control Panel". Click on "mouse". Review the settings on the various tabs to see if changes are needed to solve the problems.
(f) uninstall all hardware or software newly added. Check the performance of the mouse. If the problem is resolved, there may be a conflict with the mouse and the new program or hardware.
(g) put end to the program you are working and you restart the computer. If a user clicks on the mouse too many times in quick succession, the memory of the computer may freeze, which in turn freezes the mouse.
(h) examine the lock button for a mouse integrated on a laptop. If the mouse stops working, we can get key lock, usually located just above the mouse button. Press the button to unlock.
If the previous step fails then you can go ahead and return the mouse to get a new one, as there may be a problem with the mouse itself because it is news.
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
HP wireless optical mouse Mobile
I have a HP Wireless Optical Mobile Mouse I would use with a laptop Sony 2007 which originally ran Vista and now runs Windows 8.1. I am able to install the driver, but the mouse does not work. Flashing red light on the bottom of the mouse indicates that the battery is good. There is no visible pointer on the screen.
I took the laptop and mouse in Geek Squad at Best Buy. The technician has tested my computer and said that the problem is with the mouse. The mouse was made in January 2011. The printed Quick Start Guide says it's Version 1.1. I don't see any other model number. This mouse is compatible with Windows 8.1?
Personally, I think there is a hardware problem with the mouse and it does not work on any other system. Please check first before you invest time in finding the drivers for your mouse.
-
Bookmarks my bookmarks toolbar don't be loading more left-click
I have two folders (for example the personal stuff, my twitter Inc. and facebook, etc.) and individual bookmarks on my toolbar (e.g. google, amazon, etc.). If it is in a folder I click as usual and it opens. If there is a direct link on the toolbar if nothing happens. I have you right click and choose open. It is not my mouse left click works EVERYWHERE else. And it's not the links themselves, as if I move them (for example, in a folder) they behave.
If you close Firefox, and then start Firefox in Mode without failure, in the problem? To start Safe Mode, go to Firefox > help > restart with disabled modules.
If the problem does not occur in Mode safe, then you can disable your extensions one by one until you find out that one is at the origin of the problem. See Troubleshooting extensions and themes and problems of hardware acceleration to resolve common Firefox problems.
-
Need manual for Wireless Keyboard 3000 v2.0
where can I get a user manual for a 3000 v2.0 wireless keyboard
* original title - where can I get a manual for a wireless keyboard 3000 v2.0*
Hello
To learn more about Microsoft Wireless Keyboard 3000, you can click on this link.
Let us know if you have other concerns.
-
I have an optical mouse wireless portable 3000, the left & right buttons do not work, but the Center wheel works fine. Can someone please?
Hello
You did changes to the computer before the show?
Method 1: Check the mouse on another computer and see if the clicks.
Method 2: See the following article:
Troubleshoot the incidents of the response to the mouse or wireless keyboard:
-
Wireless Optical Mouse Microsoft 3000 click laptop left does'nt work
I have three ms wireless notebook Optical Mouse-mouse 3000. After that about a year, the left click button does not answer with a single click it takes a lot of clicks sound used every day all three have just worn. I bought different types of mouse, but always seem to be pulled back to mouse 3000 ms. I love these little mouse for laptop. I would like that they last more than a year, but what you can do. what I would like if possible for microsoft to replace these mice you know that I would be very grateful. Thank you very much
Tom Crawford
Hello
What operating system do you use?
You can try the troubleshooting methods provided in the article below which might help you.
The problems with the mouse button or scroll the parameters
http://support.Microsoft.com/kb/303091You can also view the Sub articles that might help you.
Troubleshoot the incidents of the response to the mouse or wireless keyboard
http://support.Microsoft.com/kb/838398
How to replace Microsoft software or hardware, order service packs and replace product manuals
http://support.Microsoft.com/kb/326246 -
Original title: optical mouse 2.4 ghz hp
My HP 2.4 GHz wireless optical mouse has suddenly decided to swap the functions of the right and left clicks so that, for example, I do a right click on a program to open it instead of left-click as usual. anyone knows how I can get back to normal please.
Hello
1. What is the version of the Windows operating system?
2. What is the model of your HP wireless optical mouse?
3. did you last changes before this show?
4 when was the last time it was working fine?
Method 1:
The problems with the mouse button or scroll the parameters: http://support.microsoft.com/kb/303091
Method 2:
Step 1:
Change the settings of the mouse for Windows 7:
http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings
Step 2:
Change the settings of the mouse for Windows Vista:
http://Windows.Microsoft.com/en-us/Windows-Vista/change-mouse-settings
Step 3:
Change your settings of the mouse for Windows XP:
http://Windows.Microsoft.com/en-us/Windows-XP/help/change-mouse-settings
I hope this helps.
-
Wireless mouse left button does not open programs when double-clicked.
I have a new Office Tips multimedia - microsoft wireless keyboard and mouse. Sometimes the icons on the desktop when you click the left button double does not open the program. And there are times when the program is opened, you can use the left button to navaigate within the program. Why is this happening? For the desktop icons, it happens more often in Internet Explorer... Help me please!
Hi amwash55,
1. did you of recent changes on the computer?
2 when was the last time it was working fine?
Check and make sure that the mouse settings are correctly set.
Set the double-click of the mouse speed
http://www.Microsoft.com/enable/training/WindowsXP/doubleclickspeed.aspx
If the mouse settings are correct, then make sure that you have installed the latest version of the drivers for the device.
-
Re: How to uninstall software wireless optical mouse?
Mr. / Ms.
I bought a genius wireless optical mouse and I went back because it does not work, the problem, the mouse software remained in my programs folder. So I tried to uninstall the software for the mouse, but I get the message that says "" I should have a special authorization in order to remove the software from the mouse in the folder C: / / ""
Any solution do you know what type of permission that I should have! to remove this software.
I think that if I had the CD of the mouse I have uninstalled easily, but I n ' have the CD.
But still, I don't think that you need a CD to uninstall a software on your computer.Any suggestion please.
Thank you
Hello
Should give us a little more information than we can help so that notebook and OS make you have?
What mouse do you have?Normally, you can uninstall a software application if you go into control-online adding Panel & remove programs. Select the software for the mouse then click on uninstall.
If it doesn t work you need a special program. Therefore, I prefer CCleaner. You can also remove programs with this cold, you can clean the Windows registry and system files. It s very useful and can make your Windows faster.
Check this box: http://www.ccleaner.com/Welcome them
-
Impossible to use the Microsoft Optical Mouse right click features
Original title: my microsoft optical mouse: right-click did alow all functions? He did that all the time I had to make the decision to link msn/century.
I now have to Cntl C allows you to copy
Hi SallyAndrew,
Thanks for asking this question to Microsoft Community!
I understand that you can not use the right-click on the optical mouse. I'm sorry for the inconvenience caused to you. Don't worry; We got some troubleshooting methods in order to get this fixed number.
He would be grateful if you could answer these questions as well.
1. What is the number of exact model of the mouse?
2 is the issue limited to a particular application?
3. did you of recent changes to the computer before the show?
4. what version of Windows operating system is installed on the computer?
I suggest to perform the steps in the following article and check if it helps.
Method 1: Fix a wireless mouse that does not correctly
http://support.Microsoft.com/kb/321122
Method 2: Troubleshoot failures in the response to the mouse or wireless keyboard
http://support.Microsoft.com/kb/838398
It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.
Kind regards!
Maybe you are looking for
-
Satellite C50 - b - 14 d does not start successfully
Hello Today, I received my 1st laptop and you can turn on and got to where it asks you a computer name, but then we had a power cut and now he's going on go too far that says toshiba logo then start repair, but it is 2 hours from the start of the rep
-
AirPort Express works fine with OSx but not Windows
Bought my AirPort Express 802.11n just a few months. It worked very well for all computers and mobile devices in my house. A few days ago, all of a sudden, PCs of my roommates started to get 'internet slow, yet shows the power of the full signal. Not
-
If I buy windows 7 run my games that are vista
If the game is for vista will work on 7
-
Hello I MicrosoftSparkODBCDriver64.msi need a driver that is used to connect to Windows spark. I have a 64 bit windows 7 PC. I tried to download from Microsoft provided https://download.microsoft.com/download/C/C/1/CC102271-5CE8-4F5E-A1F9-6D97CAA734D
-
Cannot install the Simulator in Windows 10
Try to install the Simulator on 10 (64-bit) Windows, get the error: "Windows error 2 occurred during the loading of the Java virtual machine" I installed the latest Java from java.com (1.8.0_73) Any ideas?