Portal of the Guest - untrusted certificates

Similar Questions

• All https: Web sites know the untrusted certificate errors and appears as the provider cert Digitalmarketresearchapps Pty Ltd. No virus found on my system.

  I started all of a sudden the problem "untrusted connection" on earlier work https: Web sites with the "not provided any transmitter channel" as a reason. I tried all the proposed solutions and nothing works. I ran several programs antivirus and no viruses or malware detected. I don't have any such installed ESET suggested in the previous solutions. Display of certificates for the default sites shows that the provider in all cases is 'Digitalmarketresearchapps Pty Ltd'. Certificates are always a start date and an expiration of 2039. I think I picked up something that causes the problem, but as I said, none of my antivirus/malware programs are detecting anything.

  I had this problem as well, and he ended up caused by the installation of the E-Rewards application notify. I had to uninstall and then restore my computer to an earlier time to fix the signer of the certificate again to "Thawte Consulting (Pty) Ltd". I contacted E-Rewards to let them know and ask why this is happening.

• Change to the vCAC device certificate - is this possible?

  Sorry for the long post, but I wanted to be as detailed as possible.

  I have to do something terribly wrong with this because I can´t see where´s the problem.

  I created a Microsoft CA and created the model suite VMware KB 2062108 (VMware KB: creating a model of certificate authority Microsoft for the creation of SSL certificate in vSphere 5.x ).

  With this, I was able to successfully complete the certificate for the following applications:

  -vSphere 5.5 (vCenter and ESXi);

  -View of the horizon (connecting to the server, security server, and composer).

  Now with vCAC:

  -vCAC 6.1;

  -Using vCenter SSO;

  I followed the "vCloud Automation Center 6 certificates A to Z" article (vCloud Automation Center 6 certificates A to Z |) VMware Consulting Blog - Blogs of VMware) for the creation and replacement of the certificate of App vCAC.

  The change was apparently with success since:

  -When I go to https:// < vcac_FQDN > / vcac it shows the correct certificate;

  -My Don t of browsers complain.

  Unfortunetly, I misspoke unfortunately :-(

  When I wen to configure SSO in vCAC, he would show me a message saying that the certificate of vCenter was not reliable. I have didn t worth actually much since configuration is complete anyway.

  The main problem was the following. Once I tried to access the portal using [email protected], she would throw me a message saying:

  "Failed to connect. Please contact your system administrator and report error < CODE > code"(code for each attempt changes)

  VCAC admin, I see the service "shell-ui-app" with a "FAILED" status and a glance in catalina.out (using the code provided above) told me this:

  Vcac: [component = "coffee: shell" priority = "ERROR" thread = "tomcat http - 17 ' holding ="vsphere.local"] com.vmware.vcac.authentication.http.LoginErrorEntryPoint.commence:82 - Exception with error code rO4WY + ug:

  org.springframework.security.authentication.BadCredentialsException: cannot authenticate the user, without credentials have been provided

  Well, that was a weird message. But what makes it most called my attention was something written above, I noticed was repeating all the time:

  Certificates not approved with serial number: [< big_number >] and the thumbprint: [< big_hexa >]

  Certificates not approved with serial number: [< another_big_number >] and the thumbprint: [< another_big_hexa >]

  I checked and this is exactly the certificate that I assigned to vCAC and root certificate of the CA.

  Thinking that the problem was caused because the vCAC App won´t trust my certificate authority root, I tried to force a little. I found 2 keystore:

  -/etc/vcac/vcac.keystore

  -/ usr/java/jre-vmware/lib/security/cacerts

  I ran a ""keytool-list - v - keystore "in two of them and I noticed that indeed my luckily to CA within the. "

  Therefore, I made a "'keytool-import-trustcacerts-file < CA_certificate > - < My_CA_Alias > alias - keystore". "

  Another audit confirmed that, now, the certificate was in the keystore. Restarted the device.

  And so far the certificates remain unreliable. Really, what I am doing wrong? :-(

  And now the last update.

  As something that already happened a few times, it just started to work on its own.

  (1) I changed the device identity and vCAC with CA-signed certificates.

  (2) for the vCAC SSO breast device configuration, the untrusted certificates message appeared.

  (3) original problem appeared;

  (4) manually import my certificate of the CA root within both cacerts and vcac.keystore within the device files vCAC.

  (5) restarted everything;

  (6) problem;

  (7) abandoned and changed all to Self-signed;

  (8) vCAC sharp device to vCenter SSO;

  (9) the message of untrusted certificates did NOT appear;

  (10) on the unit to CA-signed certificate;

  (11) restarted;

  (12) it s work.

  Go figure.

• Untrusted certificates

  I get the "untrusted certificates" warning, and despite having been through everything I can find online, ANY suggestions has solved this for me. Can anyone tell in plain LANGUAGE, (I'm not Sabrina type). I need the solution in ' left click ', 'type... here' responses.
  Thank you

  This is always issued by ESET when you turn off this feature?

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/

• Cisco AnyConnect::How to hide "security warning: Untrusted certificates.

  Whenever I connect to my ASA using the client Anyconnect, attached warning message still appears and there is no option to trust him or import the certificate so that it should not appear the next time.

  Someone please help to make the visible option to trust certificate or to make the warning go away.

  I tried Anyconnect 3.1.05152 and later also.

  The best way is to buy a certificate for your ASA and install it there.

  If you cannot or do not want to do this, you create a self-signed certificate well trained on the SAA. You must make sure your have a 2048-bit RSA right key (or create a new one, when you start).

  If you use a fully qualified domain (FQDN) for the VPN user name to access the ASA which should be the common name (CN) in the certificate. Which addresses the point #1 in the warning.

  Your customers will need to download and install the certificate in their store of trusted CA root. You can do this by browsing the web portal and using your browser tools to copy the ASA SSL certificate to a local file and then import, the substitution of the default location and choosing the store of authority CA root of trust. This element addresses #2.

  Point #3 is also because of the way the self-signed certificate has been created. If you follow the configuration guide, you must have a correct certificate and not get this error.

• How to change the sha - 1 certificate in my new esxi host

  Hi guys...

  as my lab crashed this morning (my computer has a blue screen) and of all the vm in my workstation crashed.

  When I'm the my computer upward run again and pressed 'play' to start the esxi host, I received some strange error messages.

  I decided to install a new host esxi5.1, and when I have finished configuring the esxi host, I noticed that the SHA - 1 certificate is not the same as the one I have (I have the new esxi I installed, and the older and sha-1 are different between the two hosts).

  I added the vCENTER esxi host, and now I have 2 hosts esxi 5.1 with different certificates of sha - 1?

  I can continue to work in this situation?

  I built this laboratory to study the vcp 5.0 certification. (I also installed the 5.1 vsphere to manage guests)

  It's a way to modify the certificate to the other esxi I have?

  Hope to hear from you soon,

  Best regards

  Nahum

  Israel.

  Hi Nahum,

  Each host is supposed to have a different SSL certificate

  If you are looking to implement of the CA signed CERT for only ESXi hosts, this should help

  VMware KB: Configuration CA signed certificates for guests of ESXi 5.x

  or

  http://www.derekseaman.com/2013/02/VMware-vCenter-51-installation-part-15.html

  Blog of Derek has also to the replacement of all certificates of vSphere if you want to go this route

  Concerning

  one

• How update the vmware tools on the guest or virtualcenter

  Hello

  We run a store where we support some linux boxes.  We had some problems with time drift and other things and on our vmware guy suggested put us the version of VMWare tools on the guest or virtual Center.  The only problem is that I can't find a procedure for this.

  To clarify, I'm not how to install VMWare tools on virtual machines.  We know how to do and we know to recompile after we patch the kernel.  But our guys VMWare suggests that in the end we're just recompile the same old version of VMWare tools to make it work with the new kernel.

  In fact, we suspect the version we have is very old, that we have not successfully updated because we were running on 2.5 and are now running on 4.0 Update 1 (wait for the 4.1 support nexus is added).

  Thank you

  Dan

  Welcome to the forums!

  So I assume you mean updating the source VMware Tools, which is then used to update VMware tools in guests?

  The guy from VMware is true, recompile the tools is necessary after a kernel update has been done. It is not up-to-date version. However, you must do that to make them work again.

  The latest VMware tools comes with the latest product or updates/patches for this product. Information shows that the tools are not updated after you apply this hotfix or an update.

  They also can be downloaded here (for ESX 4.x) : http://www.vmware.com/patch/s3portal.portal?_nfpb=true&_windowLabel=SearchPatch&SearchPatch_actionOverride=%2Fportlets%2Fpatchupdate%2FdisplayAllBundlePatches&_pageLabel=s3portal_pages_downloadPatch_page

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• How can I remove the guest connect you?

  How can I remove a guest login for a 2009 macbook pro?

  Preferences system/users and groups, unlock the lock, select the guest user and uncheck allow invited to connect to this computer.

• C stamp on the "Add Exception certificate" warning, what to check to avoid the lack of safety of Thunderbird: "Confirm Security Exception" or "Cancel"?

  When the "Add exception certificate" dialog box comes up with the warning "you are about to replace how Thunderbird identifies this site" which is the trunk to check?

  I want to stay with Thunderbird security system. Can I check "Confirm Security Exception" or "Cancel"?

  Unfortunately, some sites do not properly take their certificates. So basically if you trust the site, you can confirm the exception. If it is an unknown site, or you are not sure about, then cancel. Of course if you do not confirm the exception, you will not be able to see/use the site.

• Go to the guest user

  When I switch to the guest user apparently opened with sure safari and restart... N if I restart and open it is not dock and nothing to the other just only safari... What should I do?

  This particular guest account has for Safari: nothing you can do about it. If you need a less limited guest account, set one up in System Preferences > users and groups.

• How to remove the guest on Macbook Air user account

  My 13 year daughter, uses the internet recklessly and I need to close the guest account, because my parental control does not seem to work. Even though I've taken away the guest user option in system preferences, it restarts the computer so that she can use safari. Can anyone help?

  Just how did you "took the guest user option in system preferences '?

  Did you go to system preferences > users and groups and click on the padlock at the bottom left and enter the admin password to allow edits then click the guest account and uncheck the checkbox allow clients to connect to this computer?

  Parental control is not / cannot apply to the guest account.

  You must have a separate account and then check the box for this account that says: turn on parental control.

• Extreme problem of airport with the guest account

  It drives me crazy! I had the extreme AC router from the airport for a couple of years now. It works perfectly if the guest account is disabled. Whenever I try to enable the guest account access, I have a time very very difficult to connect to this account. The main and guest account are both set to wpa2. When I connect, I get proverbial bells and whistles go telling me airport utility system is set to be implemented via cable wan which decreases the Security (in my own home that is not a problem) and it tells me to put it in bridge not NAT and DHCP mode. If the clipping the guest account value absolutely not allow internet connection. What I am doing wrong?

  The macbook, I am trying to connect is running LION

  What is the brand and model of the modem Internet you have your AirPort Extreme, directly connected by Ethernet?

  If this device is actually a combination modem & router, then your extreme must be configured as a bridge. Guest network does NOT work in Bridge mode.

• How can question I change my settings to flash? I said I wanted to be invited to flash store things on my computer but the guests are too frequent and annoying!

  How can I change my settings to flash? I said I wanted to be invited to flash store things on my computer but the guests are too frequent and annoying!

  New versions of Flash have a sign installed on your system for the control of the settings.

  In Windows XP, start > settings > Control Panel > Flash Player, click each tab and change the setting "ask...". ». Most likely your guests are coming in the tab "storage." By using the parameters of "Block"... "can let Flash on some sites.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• How to add the Skype app to the guest account

  Hi all

  Can you please advise on the following questions:

  1. how to add any application like Skype to the guest account
  2. how to add any application like Skype in the Local user account
  3. how to separate the user of Skype from microsoft for the particular user account account so that we can close the session and sign in to SKype with different accounts user we like without registering again with on behalf of microsoft.

  Hello

  As you probably know Toshiba does not support third party applications such as Skype so if you have some problems with Skype or you want to learn more on this subject I recommend you to consult the Archives of Windows on Skype or Skype support directly community.

  Good luck

• Firefox Mobile has a kind of key store? How to import the SSL client certificate?

  Firefox Mobile has a kind of key store? How to import the SSL client certificate?

  There is no built-in way to add client certificates to Firefox for mobile. We hope to add this in a future version.

  See this previous question for some (kind of complicated) ways to add client certificates in the current version of Firefox for mobile:
  https://support.Mozilla.com/en-us/questions/786035?s=certificate & As = s