Portege 2010: machine wrong message appears

Similar Questions

• Sam s173-1415: cannot use the restore CD - 'Bad Machine' error message appears

  I have a s173 1415. I had to format the hard drive, when I went to use the original CD that came with the laptop it said BAD MACHINE. So I installed Windows XP.

  Now, I have all the necessary drivers and can not find one for the dvd/cdr drive, so sometimes the disc is recognized and sometimes it disappears.

  I want to set the laptop to original state, but the CD won't let me.
  What can I do?

  Hello

  It s very strange that this error message appeared.
  Generally all compatible CD should be delivered with this laptop.
  If you want you can order form taken CD supported and compatible, Toshiba service partner. It s not very expensive.

  You will also find the page of all drivers on the Toshiba driver download:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp#

  Please install all drivers in the correct order. The chipset utility must be installed and the beginning.

• Portege 7020CT: PXE - of1 message appears when using the docking station

  It is used to anchor OK but now he refuses and displays this error message:

  "" PXE - of1: PCI vendor and device ID do not match! ".

  I would really appreciate some help on this, because without e dock I have no entries or exits.
  Is this something to do with being properly "OFF"?

  PROTECTED 7020CT Windows XP

  Hello

  Well, to my knowledge the PXE error because the device is not able to boot from the local network.
  Have you tried to boot from LAN or something like that?

  Enter the BIOS and change the boot order. Perhaps you set the LAN at the first stage in the boot order, and therefore the unit will try to boot from LAN.

  I also found this site:
  http://support.Intel.com/support/network/adapter/1000/sb/CS-010508.htm

  There are and advice to install the last Boot Agent. I put t know if it helps but you can try it.

• Whenever I try to answer or write a new e-mail, the "Attachment ID has wrong format" message appears and I can't send emails.

  whenever I try to answer or write a new e-mail, the "Attachment ID has wrong format" message appears and I can't send email, how do I fix?

  original title: problem sending e-mails

  Hello Pamwolfe,

  What program of e-mail that you use or sign in a service such as Windows Live Mail Webmail?
  If you use Windows Live Mail I suggest to take a look at this site:
  http://www.windowslivehelp.com

• Qosmio F25: Cannot use the recovery CD - bad CD message appears

  I have a Qosmio F25-AV205. When I tried to use the recovery cd set with my laptop computer, an error message appears saying that I use the wrong cd and this cd is for model F25. Only despite I have the same model that the message...

  What is the problem?

  Someone replace the motherboard of your laptop?
  Sometime, a Toshiba system has had the system board replaced, it may become impossible to image the system using the recovery CD.

  The DMI string contains the model number of the system. When you use a recovery CD to recreate the image on a system, the installation process examines the DMI string and compares this string to the image being restored to ensure that the right image is applied to the correct machine.

  If the DMI string and the label on the image n t game, a bad machine or bad CD message will appear.
  In this case, you should ask the ASP in your country for assistance

• Startup error messages appear suddenly following failed repartitioning

  Following a repartitioning my hard drive using Partiton Manager, that bad happened and destroyed my system, I have now reinstalled Windows XP preparatory to the high upgrade to the Windows 7 page. However, during the time it failed to boot up my laptop, and after reinstalling the operating system, I get a BIOS message that reads

  Reprogramming & establishing Link and, after apause, 2 error messages appear:

  PXE - E61: Media Test Failure, check cable
  PXE - MOF: Existing Intel Boot Agent

  Apart from food, there is nothing attached to the laptop.

  What goes wrong and I need to do to correct the problems, please.

  You know what, install the OS by using initial recovery DVDs and the problem is solved.

• Mac Mini daily external time Machine eject message

  Hello

  I have an external hard drive as my time machine.  Frequent messages appear, saying that the disc is not ejected correctly.  I would never want to eject then why messages?

  What external hard drive and how it is connected to your Mac Mini... ?

  It might be, that...

  It is disconnected when your Mac is asleep or is cut.

  you have a defective or incompatible.

  you have a loose or bad cable.

• Portege 2010 Boot Error SESSION3_INITIALIZATION_FAILED

  When you try to start my Portege 2010 (OS is XP), I finally get a blue screen message

  SESSION3_INITIALIZATION_FAILED

  This is even after using the recovery CD disk full, to rebuild the laptop. Any ideas what is causing the problem and how it can be fixed would be appreciated?

  Concerning
  Rob

  Hello Rob

  It is very strange that this stop error message occurs after the recovery procedure. Please check these two articles about this stop message
  http://msdn.Microsoft.com/library/default.asp?url=/library/en-us/w2kmsgs/1216.asp
  http://support.Microsoft.com/kb/153742/en-us

  Maybe it will help you to know exactly what is happening.

  Good bye

• Portege 2010 - clicks of death? -Perhaps the HARD drive is dead

  Hello

  A few minutes ago, I tried to start my portege 2010, who worked a few hours ago. Now, I do not even past the BIOS screen because the disc is of strange noises, as leaders try to enter the post, but fail. I have to admit that yesterday the system froze for no obvious reason but I didn't know that this was due to a failure to come, I just rebooted the machine and it behaved like any other day. So I'm rather perplexed, how the disaster could hit so suddenly. The portege is out of the warranty period, so I guess there is no way get around to buy a new drive. I wonder if this problem is a common problem among the Portégé series, I think I remember an article published online by indicating this.

  Hello Steffen

  If Toshiba STAS 10 000 or more laptop computers Portege 2010 and you find one or 10 other users with the same symptoms of HARD drive, it cannot be any kind of common problem. Common problem is something else.

  According to your description, is it really possible the HARD drive shows signs of dysfunction. All you can do is to watch carefully what happens in the next few days and if the HDD feature fails, you must buy a new HARD drive. All that s!

  If you will be able to start it in some way I recommend you back up all your data (e.g. on USB key) before the HARD disk fails completely.

• Windows XP message appears: the software is not genuine

  Hi all
  I had Windows XP with my Toshiba Satellite this year. As you know all that laptops come with a windows certification stamp.
  I did several updates without any problem. BUT today by updating WinXP, their site has installed an icon on my taskbar, informing that my software is not genuine, and I have 'can I have been victim of counterfeiting. It does appear from time to time.

  Well, something must be wrong. My Toshiba laptop comes with Windows XP Home.
  Anyone encountered a similar situation?

  Thank you very much! Lead

  Hello

  Computers laptop Toshiba come with the Toshiba Recovery CD.
  On this CD, you will find an image of an operating system. This image will be installed on your laptop and it s not necessary to activate anything.
  You can update the OS every time without any problems and no request activation.

  If no strange message appears and ask for activation so I guess what is a virus, spyware or something like that.
  You should check you OS and if necessary go to activation of virus.

• Error messages appear during the priming by Satellite A100

  I tried to start my laptop and this error message appears:

  hidden, system bios video BIOS with a shadow,
  bus controllers USB PCI-card resource conflict mother Bus: 07, device: 06, 01 function
  resource conflict-PCI mass storage controller on card mother Bus: 07, device: 06, 02 function
  resource conflict-PCI PCI on the card mother Bus: 07, device: 06, 03 function

  How can I solve this prob?

  Hello

  Looks a bit like a conflict of devices on the motherboard.
  There is always a mentioned device: device: 06
  Then perhaps, all error messages are related to the same device. I m not very well what 06 device could be, but I think that it s miniPCI device and, possibly, a wireless network card.

  Try to remove the local NIC in the laptop and check again.
  But before you do this, go into BIOS and set the BIOS to default settings. Save the changes and start the machine again.
  Check if the message appears once more

• Can't use recovery error 'Machine wrongly' DVD occurs

  My Center dealer/replaced motherboard, when I had a problem starting. My recovery DVDs that originally comes with the laptop no longer works. When I start recovery procedure followed by message is displayed: "Machine wrongly".

  Is it possible to download a new one on the Toshiba site? If yes where exactly?
  My product is recorded in October 2004.

  Hello

  If you use a wrong as term to search on this forum, that you will find in many similar markets. When the motherboard is changed DMI information must be updated. Without this identification information is not possible.

  I recommend you contact the service again. They will update to DMI information and you will be able to use recovery media again.

  Good luck!

• Re: Satellite M35 S359 - 'machine wrongly' while trying to use the recovery disk

  I used it several times without fail. After that the laptop started acting a little strange recently (malware maybe) I decided it was time to rebuild. This time, I had 'bad machine' attempt of recovery CD error. I installed the brand new Toshiba HD, but still the same error message.

  I've searched and searched and find it is a 'classic' error but with many varied suggestions correct - which none had me up and running.

  So I hope someone can point me in the right direction.

  THX.

  Hello

  It is model Toshiba U.S. and so I looked on the Toshiba page for some suggestions.
  And I found this doc from Toshiba:

  [How to eliminate the error message "Machine hurt" during the restoration of the image of the software factory (recovery CD): http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1031 711xml & sliceId = & dialogid = 59324518 & stateId = 1 0 59322815]

  As suggested in another thread, the information stored in the DMI may not correspond with the info on the recovery disk and so this message appears.
  I don't know if the doc of Toshiba will help you but it s worth a try m.

  If you will not find a good tool DMI, then you will need to request the ASP in your country a DMI update!

  Good bye

• Skype Messages appear in a particular order?

  Then, I got a new computer recently. I installed ordinary Skype out of the site and the messages appear in a strange order. I saw a lot of similar topics, but don't really have an answer that works. Although the order in which they appear is:

  Their message 1
  Their message 2
  Their message 3
  Their message...

  My message 1

  My message 2

  My message 3

  My message...

  I need to find a way to solve this problem, because finally their messages go off the screen and I have to scroll up to read!

  You will find your answers if you follow this link - I have certainly :-)

  http://community.Skype.com/T5/Windows-desktop-client/Skype-chat-messages-are-in-the-wrong-place/TD-p...

• Satellite A100-512 - Message appears - unplugged network cable

  My model of laptop Satellite A100-512 bought in Germany, am now in India, every time I connect a LAN cable, I receive the status as "Network Cable unplugged", the system indicates the ethernet works fine! When I looked in the device properties... what could be wrong!

  Hello

  I don't know why it happens, but it seems that m has something to do with operating system settings!
  I found this MS very useful article based knowledge that might help!
  How to troubleshoot the following message appears in Windows XP: "a network cable is unplugged".
  Please check it and try the tips of different solution!