Portege 2010 PP201E - unable to connect to the router encrypted with WPA

Hello

I just bought a Toshiba (? 2002) Portégé 2010: PIII 866 MHz/XP... Part number: PP201E-00GPP-EN. support for the Wi - fi network: 802. 11 b

When I try to connect to the internet using my sky router (WPA / PSK) my Toshiba does not connect because it asks for the WEP.
I tried to change it on Assistant, but that's it or turn it off.

I have only one option is to change the router WEP, but I heard it is an old and easily hackable, technology
In any case, I don't want to mess with my router, another PC wireless and my playstation.
I looked on update of the driver toshiba but that did not work.

Does anyone know if there is a updated for my lapptop driver or do I have to buy a USB product?

Thanking you

Hello

Maybe the internal WLan card does not support the newer WPA encryption but only the WEP key.

The fact is that encryption is hardware related. This means that an update of the driver will not help you. If the hardware does not support WPA, then you need to replace the WLan card or buy a USB WiFi dongle that supports WPA.

I have thin external USB WLAN key is the easiest solution

Tags: Toshiba

Similar Questions

  • EA6500 unable to connect to the router after Time Machine

    Just got an EA6500 - updated to the latest firmware available.

    I have attached 2 x WD NAS and 1 x WD through the USB port of the device.

    Each time after I finished running Time Machine on the MacBookPro (written to one of the WD NAS), I can no more connection to the router as neither the local IP, or the cisco connect cloud. The error message I get (loosely formulated) is: unable to connect to the router. Please ensure that the router is connected to the internet.

    At this point, all the devices connected to the router (wired and wireless) still can access Internet perfectly. Only the console of the router is therefore more accessible.

    Anyone else have the issue?

    Any ideas on how to solve it?

    Contact support for Cisco and the person advised me to do a factory reset (even if the router is new with no customization!). Regardless, it now works correctly. Cisco Cloud Connect works always before, during, and after a Time Machine.

    "When in doubt, try to turn the grid and the.

  • Printer Hp6700: unable to connect to the router wireless D - Link DI-514 when SSID Broadcast is set to no.

    HP6700 printer: unable to connect to the router wireless D - Link DI-514 when the router Broadcast SSID is set to no. My MAC laptop and HP laptop both work with the set SSID on no. If I change the router Wireless SSID Broadcast is YES, then the printer HP6700 can connect to the wireless router. I set up the printer it saying that the SSID and password have been, the same as both of my laptops, but it connects ever, unless I have change the router to broadcast the SSID. Help!

    Have you tried to update the firmware on the DI-514?

    You can also try to set a static IP address on the printer, and then assign the printer to the list of DHCP static in the interface of the router.
    To give a static IP address to your printer:
    -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
    -Enter the IP address in a browser to reveal the internal settings of the printer.
    -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
    -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
    -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
    -Enter the IP of your router (on the Page of the Network Config) for the gateway.
    -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
    -Click 'apply '.
    Now, stop the router and printer, start the router, wait, and then start printing.

    After that you remove and re - add the printer to your Mac.

    Show support by clicking on the blue Kudos star in the post that solved your problem. Doing so will help the other members of the forum their solutions also.

  • Unable to connect to the router

    -Please ignore this message: I did not wait enough to do the factory reset. It seems that launch a factory reset without waiting for 10 seconds only restarts the router.

    Hello

    Today I tried to connect to my router (I do not use it for a few years) and it didn't work at all.

    Initially, I plugged it in just 2 RJ45 cables: one for internet, one for the PC. The computer could not connect to the router (DHCP failed).

    I then restored the factory settings and tried again: same thing, the computer could not find the router via DHCP.

    I tried to force an IP address (IP: 192.168.1.5, mask: 255.255.255.0 Gateway: 192.168.1.1).

    By forcing the INVESTIGATION period, I was able to connect to the router, but when I tried connect to 192.168.1.1 with admin/password, it wouldn't let me (bad password - don't forget I restored it to factory settings, several times actually). The address http://routeurlogin.net/ is not found (404) and I was unable to go on websites (404). A curious thing is, using this connection, I was able to connect to Skype (and send/receive messages), although the sites Web could not be reached from a browser.

    I'm running out of ideas to solve the problem, but I suspect a hardware problem, so any help would be welcome.

    Yes he did.

    I couldn't find an option to delete my message, otherwise I would have done it.

  • Unable to connect to the HP ePRINT with Color LaserJet Pro 400 M475dw MFP website

    LaserJet Pro 400 color multifunction m475dw-Just installed. Print, scan, copy and fax all works fine! use of WiFi

    Using IMAC OS 10.8.2 with all updates

    Netgear DGN2200v3 router using

    Printer not connect to the HP ePrint website

    Printer connects using Hp and profile for fax set up etc.  But the "HP Web Services" article when enrecorded and hit the Activate button - it does not connect to the site - it seems just to refresh.

    "If I try to connect thro the printer not the imac and try to activate the web services, it says" connection "on the screen BUT after a few minutes of trying - so says" CONNECTION ERROR - the printer is unable to connect to the service. Check the internet connection

    ANY IDEAS - HAVE I MISSED SOMETHING?

    Thank you very much

    I try to pull up the built-in web server (EWS) by entering the IP address of the printer in a browser and set a static IP & DNS address.

    The information for the default gateway, subnet mask and IP address can be accessed from the Setup menu on the front panel, go to settings > reports > network summary and it will print off the coast.

    Once you entered the IP address in a browser and have the EWS pulled up, go to the tab above titled "Networking". Then click on IPv4 in the left column; who will bring to the top of the address configuration page.  Place the manual radio button and fill in the IP address, the default gateway and the subnet mask with the information from the report. You don't fill the part entitled WINS server, which can be left alone.

    You will then want to fill in the DNS of the page part, the favorite should be set to 8.8.8.8 and the alternative/secondary must be set to 8.8.4.4. Then click 'apply '.

    Power cycle the printer. Turn off the power, wait 30 seconds and then turn it back on. Once it is fully operational, try again to connect to web services.

  • Unable to connect to the router WLan - Satellite L300D

    Please help me so that I have still a few hairs left!

    I installed WLAN driver on my laptop Satellite L300D with Vista Home installed.

    I see my network in the available connections, but when I go to connect, it will not connect.

    My other two desktop computers can connect to the router without a problem.

    Any suggestions?

    Thank you
    Neil

    Hello

    I think that you didn t try updates. Right?
    Therefore, my first recommendation would be an update of the BIOS and driver WLan.

    Check the current version of the BIOS that is available on your laptop. If the latest version has been released then update the BIOS.
    In addition, to download the latest WLan driver from the Toshiba WLan portal and to update:
    http://APS2.toshiba-tro.de/WLAN/

    On this Wlan site, you will find three different WLan drivers for three types of WLan cards. First check your wireless network card, and then use the right driver!

    See you soon

  • Unable to connect to the router (even after reset)

    I'm really frustrated, and I hope that this community can provide an answer. After all the hype around this router, it is he who gave me the most trouble.

    About a month and a half... completely randomly it seems to me, I could not connect to the router more. Not through intellectual property, routerlogin.net/com...nothing. It just says: cannot display the page. I did everything I could possibly think, tried all of the suggestions I could find here and elsewhere and still nothing would work.

    I finally did a hard reset and obviously lost all my settings... and RIGHT AFTER the hard reset after upgrading the firmware, I can't connect to the router again. This could be the cause? Is there a way around it?

    The router worked fine until about a month and half ago. Then I stopped being able to connect to the admin page. Several resets hard did nothing.

    I ended up RMA'ing it and the new replacement works fine (for now).

  • Unable to connect to the router (BEFSR41 V4.0)

    I have a Linksys BEFSR41 (Version 4.0) wired router and I am not able to connect to it. It has been in storage (the top of a closet shelf) for the past two years and when it when it was still used it worked like a pro.

    I used the downloaded from the site Web of Linksys router configuration utility to install it, and when it gets to the final stage, he says that it cannot connect to the router. Try to go to 192.168.1.1 translates into a (very long) network timeout.

    I have reset the router several times (retained in the for more than 10 seconds reset button) and have had no result. All the lights on the front of the router work normally.

    I already checked and I'm set up to get the IP addresses of network automatically rather than assigning a static.

    Any help appreciated,
    ~ Darxide

    Number set by putting the ADSL modem in bridged Ethernet mode.

  • Compaq presario c700-c795tu: unable to connect to the WiFi network with WPA2 encryption

    Hi team,

    I tried all the options in your post and I am still unable to connect to WiFi with WPA2-PSK encryption.

    I am currently using the adapter network driver atheros 5007 wireless.

    Some of the links in your message that resolved this issue earlier are currently unavailable.

    It would be great if you could help me to solve this issue.

    Concerning

    Roger

    Here is the patch for WPA2 for XP SP2...

    Install and reboot and then see if you're OK...

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=1974

    That's the only reason why I can think that now prevents you from being able to connect on a network with WPA2 Personal Security.

  • Unable to connect to the PPPoE server with 2 BEFSR41ver

    I had to get a new AT & T DSL line to a new home with new ID and password. I've never had a problem with the router to the old address and the line DSL.  I've reconfigured the router with a new user name and password for PPPoE I got from AT & T for use with their new motoroal they sent me. The modem gives me the internet when I connect the modem directly to the computer.  When I connect the modem to the WAN port of the router with the computer connected to one of the LAN ports on the router, I get "Unable to connect to PPPoE" when I try to access the internet. When I connect the modem to one of the LAN ports with another port LAN from the router to the computer, I don't have the internet, but this is not recommended for the router cable management. With the modem connected to the WAN router and a power cycle performed port, I still get the same error message. I disabled my firewall and still have the same error message. I don't think I have another firewall to operate.  I never had this problem to my old address and line DSL AT & T with different ID and password and the same router.  Anyone know what is happening?  STEIN

    Your problem is that your "modem" is actually a "modem-router" and it uses the same subnet as the BEFSR41 192.168.1.x.  To resolve this issue, follow these steps:

    All first, reset your BEFSR41 factory default, then set the "local IP address" 192.168.2.1

    To do this, follow these steps:

    To reset your router by default, follow these steps:

    (1) turn off all computers, the router and the modem and disconnect from the wall.
    (2) disconnect all the wires of the router.
    (3) turn on the router and let it start up completely (1-2 minutes).
    (4) press in and hold the reset for 30 seconds button, then release it, then let the router reset and restart (2-3 minutes).
    (5) turn the router.
    (6) connect a computer cable to port 1 of the router (NOT to the internet port).
    (7) turn on the router and let it start up completely (1-2 minutes).
    (8) the power of the computer (if the computer has a wireless card, make sure it's off).
    (9) try ping on the router. To do this, click the 'Start' button > all programs > Accessories > command prompt. A black DOS window will appear. Enter the following text: "ping 192.168.1.1" (without the quotes) and press the Enter key. You will see 3 or 4 lines that begin with ' response to... ". "or"Request timed out". If you see "reply from...". ", your computer has found your router.
    (10) open your browser and point it to 192.168.1.1. This will take you to the login page of your router. Leave the user name blank and in the password field, enter "admin" (without the quotes). This will take you to your router configuration page. Note the version number of your firmware (usually found near upper right corner of the screen).  Then, change the "local IP address" 192.168.2.1, then click the 'Save Settings' button and wait (3 to 60 seconds) of the screen refresh.  You will be probably disconnected from the BEFSR41.  Don't worry about this.  Turn off the BEFSR41 and your computer.

    (11) then, using an ethernet cable, wire the ethernet port of the modem to the Internet port on the BEFSR41.  Turn on your modem and enable good start.  Turn on your BEFSR41 and enable good start.  Turn on your computer.  Test your system, it should work.

    If you can not ' response to... ". "in step 9 above, your router is probably dead.  Report with this info.

    If you get a response in step 9, but cannot complete step 10, is that your router is dead or the firmware is damaged. In this case, a report with this problem.

    If you need additional assistance, please state the version of firmware on your router and the results of steps 9 and 10. In addition, if you receive error messages, copy them exactly, and report.

    Please let me know how things turn out for you.

  • Unable to connect to the router with windows 7?

    I have just bought an Acer Revo R3700 and installed Windows 7 above, but I can't connect to my router.

    My router is heaven and successfully has 4 laptops (both under Vista, two 7 running), an Xbox and a Wii and two smartphones connected to him. Yet I just can't do this system to connect to him.

    I'm at my wits end... I've tried absolutely everything. I searched the Microsoft answers site found several similar problems and tried a lot of solutions, including adding files in the registry and update drivers.

    At first I could connect to the internet every now and then, but it was biblically slow (I tried to download Google Chrome and got him to 0.2 Kbps) and soon disconnected. Now I can't connect at all.

    I just downloaded a the Ethernet controller driver and updated a driver WLAN as they apparently do not come with Windows, but it still doesn't work. Although the message has now changed to "Unable to connect" to "Limited connectivity" (even though I think it's more coincidence than anything else)

    It should not be a question of signal strength, like the Xbox and laptop computers work fine when placed next to her.

    Really needed a solution to what running an ethernet cable is not really an option :(

    Thanks in advance guys. I'll be happy to provide any additional details if you need it :-)

    EDIT: / / I would add that I seem to be able to connect fine with a phone as a hotspot? It is very very weird.

    EDIT: / / I just managed to connect, but its very slow and not changed anything for the last 100 times? Everything seems to be completely random when it let me? : S

    Hardware support comes equipment - including the drivers/software manufacturers to use such software in all operating systems.

    Looks like a possibly faulty hardware or shotty (the wireless network device.  Make and model)?

  • Satellite A300D - unable to connect to the router

    I can't connect to my wireless modem that works correctly for other laptops at home.

    I bought this phone 2 weeks ago and when I discovered that it can not connect, I took it to the shop, I bought it. Here, surprisingly it connected to wireless internet so they told me that there must be sth wrong with my modem. I reinstalled my modem but still not good. I can connect with other laptops that have vista as well.

    I can view the connections. Sometimes, he tells me that the password is wrong that I'm sure I get right! I even tried to completely disable password security, then it seemed like it was connected, but I could not access Web sites, including google.com. Sometimes it is said that id verification timeout. I reinstalled the wireless driver that did not work. He has no problem with the connection to the local network. I almost tried everything but still can't connect.

    Help, please!

    Hello

    Why you try to reinstall the modem driver if you have a problem with your wireless network card?

    Anyway, if you can plug it into the router in the shop everything should set up and installed correctly on your laptop and the reason must be the router.

    So in your case, I would try to update the firmware on your router.
    If you use DHCP, try static IP addresses. Try to also disable filtering of MAC addresses and try another encryption, e. g. WPA2.

  • Satellite P750: Unable to connect to the other PC with WLAN

    Satellite P750 was working fine until yesterday.

    Today, when you use the Atheros AR9002WB-1NG wireless adapter I can't connect to the other pc on the network.
    However, I can connect to the internet ok.
    Other pc can not see me either.

    * When I use wired everything is ok *.
    I tried to stop the antivirus and firewall, but it made no difference. I reinstalled the drivers and etc. shares checked file.

    Can anyone help please?

    Hello

    You should enable the option called Ad-hoc to peer option in your WLan settings!
    Go to network connections
    Select connections-> properties-wireless
    Add the new network
    Here you must configure this (insert SSID, encryption, and password), and don t forget to check this is a computer-to-computer (ad hoc) network

  • Unable to connect to the generator signal with LabView

    Hello

    I use a Tektronix AFG 3021 B signal generator. I installed the National Instruments driver (tkafg3k) for this device. My computer is connected to the signal in the block diagram generator, I place a block called "Example - Getting Started vi". I run the vi (there is no need of connections, so the vi has just the one block).

    The vi then gives me this error:

    Error 1073807343 has occurred to be initialized with Options.vi of tkafg3k
     

    Possible reasons:

    Driver status: (Hex 0xBFFF0011) primary error: error (Hex 0xBFFF0011) - information on the inadequate location or a resource that is not present in the system

    I know that the signal generator properly communicating with the computer because when I run "VISA Resource Manager", I can ask for the name of the device and it returns the correct name.

    -I'm using Labview 8.6.

    -I have NI-VISA installed 4.2

    -The driver that I use is available here: http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=005994E37F5B2318E0440003BA7CCD...

    -J' use the driver that is for version 7.1

    -J' uses this compliance record: http://joule.ni.com/nidu/cds/view/p/id/1095/lang/en

    What is the cause of this error and how can I solve this problem?

    Thank you.

    -Zach

    Do you really need to use the IVI driver, or you can use the LabVIEW driver? If you have need of IVI, configure you the Max with a logical name, etc.

    PS You have posted to the wrong Board. It is for the signal generators of NOR. You should have posted to the Instrument of narcotics control.

  • C6180-unable to connect to the router

    I just installed a new Cisco Valet M10 router for a home network.  I'm following the installation process for the HP, but it keeps just looking for the router and it is never.  I spent hours with Cisco determine connections, there are very good.  Is there a way to manually insert the name of the network, so the C6180 can find it?  Any ideas how to get the configuration wireless without the printer being able to find the network itself?

    printer down radio.

Maybe you are looking for

  • Hpg61-429mw: Hp g61-429mw

    When I start my laptop, it is the installation is from services goes no further. What can I do I have tried f11 - f10 nothing in it works.

  • transfer iPhone to new Mac iMessage

    Hello Is there a way move/transfer iPhone and iMessages of iMessage on a new mac? Messages have been backed up in iTunes. I am running Yosemite 10.10. Thanks in advance!

  • Not detected in satellite pro 6000 integrated wireless card

    Hello my company has two satellite pro 6000 with wifi built-in.I'm sure that when we have received laptops led wifi turn properly when the wifi switch is activated.Since we had no wifi, never bothered us check.Now, it seems that the card is not detec

  • Insert data to a wide range of data

    Hello world This is my first Post here. I am buiding software for an autoprober and I have a large set of data (not really makes approximately 640 KB). There are many features on the plate so I want to minimize the time it takes to read/write data. I

  • Microsoft Visual C++ Runtime Library Runtime Error!

    I am running Windows XP SP3, HP 2.8 GHz, Pentium 4 dual core, 2 GB of memory I installed the HRBlock2010 tax program and received the following message: Microsoft Visual C++ Runtime Library Runtime error! Program: c:\Program Files\HRBlock2010\Program