Portege 3440CT: what is an original memory module specification

Similar Questions

• Portege 4000: Where to insert the memory modules live

  I wanted to just extend the memory of my Portege 4000, but I didn t find installed RAM.
  I ve opened all the screws, I found (without opening the whole case), but I didn t find the RAM slots.
  Does anyone know where to insert the RAM?
  Thank you very much
  best wishes from the Austria
  Markus

  Hello

  Module of memory is under the keyboard on the right side near the mouse pad. If you only, please be careful and remove the battery before you begin.

• Satellite Pro P100: What is the part number for Toshiba for a 2 GB memory module

  Unable to find any sort of emailing this issue so I posted on the forum. Of course this info should be more easily accessible without having to ask.

  What is the number of part of Toshiba for a 2 GB for a PSPA4E-00F007 memory module. It's a satellite Pro P100 T2400

  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/SUPPORTSECTION/discontinuedProductPage.do?service=UK&BV_UseBVCook ie = Yes & PRODUCT_ID = 115421

  Gives memory crucial me this module - is that correct?
  http://www.crucial.com/UK/store/mpartspecs.aspx?mtbpoid=A332E10BA5CA7304

  Found, via the Kingstons site - is this okay?
  http://www.dabs.com/ProductView.aspx?QuickLinx=4P3V

  Would be really grateful for official clarification here.

  Thank you very much

  It must be PA3513U-1M2G. Please check whether this module is compatible with your model of laptop. I think so.

  In any case I recommend to buy products of high quality like Kingston modules.

• Re: Satellite Pro M40: what memory modules that I can use

  Hello

  I was hoping someone could point me in the right direction.
  I have a Satellite Pro M40 part number: PSM46E-00H002EN

  I really want to upgrade the memory, but I don't know what to do.
  I know I want two 1 GB ones but I do not know what kind.

  I looked and there seems to be so much of.

  Could someone tell me exactly what I want or give me a link to buy.
  I would be grateful rerally.

  Hello

  I think you should check this page from memory Satellite Pro M40:

  Memory for Toshiba Satellite Pro M40
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=26119&ft=m&St=3

  It is said that you could use the DDR2 533 MHz (PC2-4200) 200-PIN SODIMM memory modules and you could upgrade the memory up to 2 GB of RAM

  Good bye

• Satellite A30 - 151 - what memory module can use?

  Hello

  I have TOSHIBA Satellite A30-151 with 768 MB of DDR1 memory.
  I want to upgrade. What is the best memory that I can buy?

  the card says:
  Max 2 048 MB.

  So, how many slots I? I can buy 2 x 1 Go DDR1-333 memory? Can it be more than 333 then?

  Thank you
  NIR.

  Hello

  It is really an oldie
  As far as I know that you can upgrade the RAM up to 2 GB of RAM
  The bus (FSB) front-end speed seems to support 533 Mhz and that's why you should be able to use the 533 Mhz RAM modules.

  PS: The laptop must support 2 slots of memory if you are able to put 2 x 1 GB RAM

• Satellite P100-488 - what memory modules that I can use

  Hello

  I want to upgrade my memory from 1 GB to 2 GB, but I can't find the correct specifications for the 1 GB memory current installed on my laptop.

  Indeed, I could only confirm that the frequency is 533 Mhz, but my question is: what type of memory should I use? PC2-4200 or PC2-4300?
  I am unable to find the information of the current type used on this laptop.

  Thanks in advance.

  Hello

  This site of memory should help you:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=29973&ft=m&St=3

  According to this website of the Satellite P100-488 supports DDR2 667 MHz (PC2-5300) memory modules and you can upgrade it to 4 GB max.

  I hope I could help!

  Greetings

• What is the original Lightroom hang up, mainly in the develop module?   I've recently updated for Windows 10.  I tried to reinstall LR, but it made no difference.

  What is the original Lightroom hang up, mainly in the develop module?   I've recently updated for Windows 10.  I tried to reinstall LR, but it made no difference.  I get no error message, just the blue spinning wheel.

  Hi Michigoose,

  Please go the Edit option in the library Module, then go in the preferences.

  Go to the performance tab and uncheck the option "use graphics processor.

  Restart lightroom and working in the develop Module.

  Please let us know if it helps.

  Kind regards

  Tanuj

• Portege 3440CT: how to format HARD drive

  Hi all

  After suffering a little frustration, I decided to use the wealth of knowledge and experience which is available on the support forum.

  I have a Portege 3440CT which has been delivered to my friend a few years ago, by a company she worked at the time. When the company replaced the laptop, we were allowed to keep the old, we use very occasionally. Unfortunately, the laptop has recently experienced a failure total and irrecoverable from the original hard drive, which was not a huge setback because there was no essential data there.

  In any case, I have from a compatible spare hard drive - a Hitachi 30 GB ATA-5 / IDE 2.5 "9.5 mm 4200 RPM, Pt not ' DK23CA-30F - and mounted, but as the hard disk is not formatted the laptop does not see it is there. As I said earlier, the laptop was provided by the employer, so we are not in possession of any recovery disks Toshiba or Windows that may have been provided, the laptop was originally running Windows 98 Second edition, and the sticker detailing the product key is always on the underside.

  I approached one of the suppliers of services of Toshiba for help and they directed me to Toshiba.
  Toshiba says that the laptop is no longer supported so they directed me to a service provider, I went around in circles.

  My question is, if I bought a copy of Windows 98 SE, or Windows XP and installed on the external floppy drive, which would also include a facility to format the hard drive? I think that in Windows 98 Second edition, there was a function of FDISK. I was able to access the pages of the BIOS after looking through advice given here, I can change the order of boot with no problems

  What I request, essentially, is that now, I have installed a new hard drive, what do I do next?

  > My question is, if I bought a copy of Windows 98 SE, or Windows XP and installed on the external floppy drive, which would also include a facility to format the hard drive?

  Yes, definitely Yes! The installation of Win98or of other versions of Windows like W2K or XP provides an option to format the HARD drive before installing the operating system.
  Simply boot from the bootable CD to get this feature.

• Re: Portege 3440CT - starting problems

  I received a Portege 3440CT by a former colleague. It works under Windows 2000. She has not used in more than 5 years and can't remember what the password was. I tried to log in as administrator with a blank password, but the password has not been left white (grr) so basically I can't cross the password prompt.

  Shouldn't be a problem - there are a lot of Internet password recovery tools. I did a disk using this one here: http://home.eunet.no/pnordahl/ntpasswd/ intending to boot from the disk - there is a brand USB Toshiba external floppy drive.

  HOWEVER: the Portege stubbornly refuses to do. The boot order is set to try the FDD before all other options; I manually told to boot from diskettes; There is no ignoring me and Win2K boot from the hard drive. Would be very grateful for any ideas!

  I do not have:
  a reader of CD or DVD for laptop;
  a network connection or internet on it, as far as I know;
  disk recovery or installation of Windows;
  anyway to start Windows without knowing the password.

  I have:
  USB flash drives / external hard disk drives;
  The installer of Ubuntu (although on a CD, so useless without a CD player?);
  other computers.

  Wipe the hard drive is a solution I'd be happy to see if anyone can advise me on how to do it - there is nothing important about the laptop that should be retrieved.

  Hi abi278,
  first of all: what do you think?

  -install a new os on this machine?
  -use the operating system installed?

  get rid of the operating system administrator password:
  -install the drive in another system and run norhdahls supertool > read each line which is given! It is able to check the registry to another hard drive as the boot device.
  -make an installation of xp on another machine, sysprep this installation and change drive hard back
  -install the drive in another system and make it bootable with back, copy the source files for the system of desires and run the installation after you reinstall hard drive to your ct 3440

  Maybe you need a special player to install...

  BTW: nordahls disc resets passwords * inside * your operating system - read the manual of this powerful tool.

• Portege 7200 does not recognize external memory

  I downloaded Windows XP on my 7200 Portege (with 256 MB external memory) and it worked fine. All of a sudden it started overheating and has been extremely slow. I reformatted the drive, downloaded XP again and it seems to work well, although slowly;

  However, he refuses to acknowledge the external memory and seems to work with internal memory of 64 MB only.
  Is this a problem of port external memory (hardware) or I can do something to fix this?

  Hello

  You suggested also that the laptop started to overheat.
  As far as I know it is possible that the cooling modules cannot cool the CPU and then the CPU does not work with maximum efficiency.
  You should check you cooling grids for dust and debris.
  You can try to use the vacuum cleaner to clean the fans. But be careful.

  The second possibility is a dysfunction of memory modules.
  Try to test with another.

• Satellite M70 - how to remove the memory module

  Can someone post instructions on how to remove / add modules of memory for Satellite M70?
  Thank you
  FS

  Hello

  It of not difficult to remove or Exchange the memory modules because you only check Chapter 8 and 9 of your owner's manual. In the user manual, you can find a detailed explanation how to do this with a few photos and what you need to the modules of RAM.

  Check this box!

• Installation of the 4x8Go memory modules on Mac Pro early 2009

  Can I install 4x8Go registered memory modules on Mac Pro 5.1 firmware installed early 2009 Mac Pro?

  I installed 4 modules, system preference, however installed 3 modules and 1 location of vacuum with the Red of error ON the CPU board memory.

  

  If you rearrange the same empty watch housing RDIMMs?

  If you use only two RDIMMs can you do this job to see the slow?

  What specific memory do you have?

  This

  http://eShop.MacSales.com/shop/memory/Mac-Pro-memory#1066-memory

  shows that only 16 GB DIMMs is registered.

• Update BIOS on Portege 3440CT.

  Hello!

  I have a Portege 3440CT with version 1.50 of bios.

  This version does not support large HARD drive so I thought I would update to the BIOS. (I do not know if the version 1.60 don't either, does anyone know?)

  When I try to run the program to update the bios on win2000, he says: 'Initial error', someone knows what is the cause?

  BIOS is downloaded from the Web Toshibas website.

  I have no floppy or CD-rom available.
  Have you tried the update on win98 and also in the BACK and he says ' this not available in v86 mode utility!

  Is it possible to place the BIOS on a small hard drive and boot from that?

  Ideas, anyone?

  Sorry CyB, but I really don't understand you. If you see the Toshiba support page you will find two updates to the BIOS. Two of them must be done using the floppy drive. So now I'm wondering why you try to do it under operating system running. Sorry, but this is really ridiculous.

  Toshiba offer two different BIOS updates. One is TRAD (must be done with the FDD) and WIN (can be done under WXP or now Vista). For old models of laptops there is no version of WIN.

  Is it possible to place the BIOS on a small hard drive and boot from that?

  As far as I know something like this is not possible and you can check eBay and get the FDD. You can get it for little money. It's really cheap.

• Portege 3440CT: update my O.S.

  I have a Toshiba - Portege 3440CT. My operating system is Windows 98, distributed by Toshiba. Now I need an update for my O.S. and I am looking for Windows 2000 or more. I need a help.
  Thank you

  Hi Octavian,

  You are very lucky. You re Portege 3440CT are supported for Windows 2000.
  The best way to install the new OS is to use the original recovery CD Toshiba. If you do not have one you need to install all of the individual drivers.

  On the next page, you can find the necessary drivers:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Good bye

• Satellite A100-192: which is a mark of my memory modules

  to start... I am owner of a satellite a100-192...
  I think to upgrade my ram, and I know the type of ram inside my laptop's pc533 so-dimm ddr2...

  But I can't find what brand of ram comes with my type of laptop?

  Well, I guess the Toshiba provides own notebooks with Toshiba memory modules.
  It seems that these modules are compatible:
  DDR2-533 256 MB (PA3389U - 2M 25)
  512 MB DDR2-533 PA3412U - 2 M (51)
  1 GB OF DDR2-533 (PA3411U-2M1G)

  Also the Kingston modules support a great performance and could be used.