Portege 3490CT: operating system cannot detect the wireless network card

Hello
Portege 3490CT with windows XP

Problem: Try to install the wireless lan card. Windows is not able to detect the new hardware.
Details of LAN card are NETGEAR 54 Mbps, model WG511v2

Specifications for lan card
It is 16-bit PCMCIA and CardBus 32-bit compatible and works in any available PCMCIA or
Location CardBus. IEEE 802.11 g and b standard wireless technology.

Specification for laptop Portege
PC card slot supports two Type II or Type III PC cards; R2.01 PCMCIA, CardBus, PC Card16

all tracks on this will be very useful
Best regards
Ashwani

Hello

What the BIOS has been installed on your laptop?
If you use the Toshiba BIOS so there could be an option called configuration of the device.
(it s is available on my Satellite)

You change the option for all devices, you will be able to change the PC Card controller mode. I think you should play a little with this option.
In other cases, the user was able to resolve a similar issue by changing this option.

Please report if you re successful because it would be very interesting for me.

Good bye

Tags: Toshiba

Similar Questions

  • Dell Inspiron 14r 5420 cannot detect the wireless network card

    I scanned several times but still could not detect any wireless adapter.

    And then I tried to uninstall all the cards and install the last card that I had downloaded from http://www.dell.com/support/drivers/us/en/19/ServiceTag/DV1KDT1

    The two of them I tired to install and they have been unzipped successfully, but when I scanned the network adapters in Device Manager, even once, there is no change, all new.

    And I also got this

    When I clicked it, it became like that

    Amicodu,

    Sorry for the delay, got a little because I was absent.

    I don't see your listed wireless adapter. It may have failed or came loose. If you are under warranty, contact Dell Support tech.

    If you are not under warranty, the manual can be found HERE and go to page 45.

    Rick

  • Photosmart C6180 cannot detect the wireless network

    I have a Photosmart C6180 for over a year, and until recently it connected wireless very well.  But since a week ago, it can't detect the wireless network.  I turned off the printer and wireless router several times each without success.  The "Wireless Setup Wizard" running on the C6180does not help. Watch simply screen printer "looking for... wireless router. "indefinitely, until the function Cancel.  The wireless router is about four feet from the printer, in a direct line of sight.  In addition, I have wireless Internet access using the same router and continue to do this successfully, then the router itself works.  Recently I have updated the firmware on the router as well (after the beginning of this problem).  Running the network Test report wireless on a 'PASS' C6180 returns for "Radio on" but a "FAILURE" for "use of Radio". The radio broadcasts as "about" section of the Menu Radio wireless network.  My router is a Belkin Wireless G Router model F5D7230-4.  The printer prints very well with a wired connection, but wireless connectivity has been a key reason behind my purchase.  Any suggestions greatly appreciated.

    Sorry, but your wireless radio is dead.  Its time for a new printer.

  • Windows xp on te2000 cannot detect the wireless LAN card

    I have a portable te2000 that the wireless lan card is detected as PCMCIA MTD-0002.
    I downloaded the drivers, but once again I installed windows will not use it. I get the error code 10.

    How can I make it work?

    The wireless port is enabled, but it has an orange light (not green) no idea why?

    Thanks in advance
    Ken.

    Hi Ken

    Use this original device ORiNOCO Mini PCI Card (comes with) or if you use an additional card? The unit is pre-installed with the original recovery CD?

    According to the specifications of error 10, you should try to update the WLAN driver.

  • Qosmio F10: Driver Installation does not detect the wireless network card

    I wonder if anyone can help before I phone supported again. My motherboard is dead and ASP replaced and recovered my laptop qosmio F10. Since having back, my wireless card did not work.

    Windows detects a "network controller" whenever it starts and gives me the opportunity to install it. I tried to install it by navigating in the 'tools and utilities' records CD rom for folders and subfolders of "Wireless network driver" and it still does not detect the card.

    I also tried to install using the cd rom web gui and selected the 'Pilot wireless network' link and then tried to install it. It opens a dos command prompt and try to install but comes up with the error "failed installation.

    I ran the customer service and they told me to run the qosmio recovery/then recovery of product/recovery of qosmio and again...

    I still don't the card wireless not yet installed. This happened to someone else?

    I tried already shot the drivers from the web, but with no luck... If a representative of customer service with the help of good technical knowledge that would be great, or if someone has encountered the problem too and he had fixed to the give me some advice...

    Thank you very much

    Sean

    Hello

    you see the card wireless as an unknown device in Device Manager? If this is not the case, perhaps that the card was not properly installed after replacing the motherboard.

    Sorry I have no other idea.

    Good bye

  • HP 15 D103tx: can't detect the wireless network adapter in Device Manager.

    I can't detect wireless network adapter in the device even Manager after installing the drivers wireless from the following link: http://support.hp.com/in-en/drivers/selfservice/HP-15-d100-Notebook-PC-series/6782098/model/6837966?...

    Wireless "F12" key remains orange color after pressing it several times. I tried to install "Drivers HP wireless button" from the link above, but between th installation process I have error ot OS isn't accomanied for pilots

    I can't connect to a wireless network from my wireless adapter doesn't work. I have to sit near my wifi router to connect with laptop computer using lan cable.

    Even HP Support Assistant does not detect the wireless network card hardware

    Help, please!

    Hello

    According to HP Partsurfer, your lapotp came with Atheros AR9565 802.11bgn 1 x 1 WiFi and Bluetooth 4.0 adapter combination WLAN. Also, your laptop came with FreeDos and I guess currently installed Windows 8 64 bit OS, I am correct?

    The Support page for your machine, doesn't show that the Realtek RTL8188EE 802.11b/g/n Wireless LAN Driver for Windows 8.

    Please download, save & install the Dirver and restart the system, check if the wireless works.

    Concerning

    Visruth

  • I had to reinstall my windows OS and now I can't connect to a wireless device, tells me that it cannot detect any wireless network hardware

    original title: Wireless help network device

    Help, please. I had to reinstall my windows OS and now I can't connect to my wireless device. When I try it tells me that it cannot detect any wireless network hardware. I am currently connected via my laptop air card. Please help me to find and correct the problem.

    Have you installed all of the correct drivers?

  • Windows Vista detects the wireless network but will not connect to it. Two other users in the same office connect without difficulty.

    The title says it all really.

    I was connected and working normally for about an hour this morning, until suddenly the connection has been lost.
    Windows detects the wireless network but will not connect. Two other users in the same office connect without difficulty.
    Help, please.
    Thank you.
    original title: vista detection network but will not connect

    Hi JulianBeach,

    1. you have made no changes to the computer before the broadcast took place?
    2. What is the exact error message you get?
    3 is connected to the domain of the computer?
    4. what happens when you try to connect to the network?

    Try the steps from the following link:
    Windows wireless and wired network connection problems
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Additional information:
    Wireless network card: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

  • Satellite Pro A40 fell on the wireless network card; Damaged PCMCIA slot

    This morning my Satellite Pro A40 (Celeron 2.6) fell 40 cm. He fell right on the wireless network card that has been inserted. This card is still alive and so is the rest of the laptop, but the PCMCIA location is little damaged. I can insert PC cards almost completely, just the last piece (when the pins are) wrong.

    I removed the cover near the CPU, and there, I could see the inside PCMCIA slot; I could see the main part and the last part where the pins are. That little part as is pushed upward, as you can see in the pictures.

    I think I'd be able to fix myself this PCMCIA slot, but I can't remove it. I removed all the screws on the rear plate, but he is still blocked.

    Pics:

    PCMCIA slot

    The PCMCIA location; on the left, you will see the part with the pins, which is pushed upward. It's also what I see when I look at the pins in the PCMCIA slot. as they are pushed down, but I don't think they are folded.

    Wireless network card

    Wireless network card; It is a little damaged but it still works.

    Does anyone have an idea how I can remove the back plate, or another way to remove the PCMCIA slot and fix it?

    Hi Steve

    Well, I can give t well you not answer how you can just remove the PCMCIA slot.
    There are a lot of screws and to my knowledge, it is necessary to remove all covers and screws that are placed at the bottom of the unit and inside under the keyboard.
    Please check this specific device. Perhaps you have overlooked a few screws.

    But if it is impossible to remove the PCMCIA slot of the unit, I recommend to ask the service partner for a detailed instruction.

    Good luck

    Good bye

  • ProBook 4520 s - exchange of the wireless network card

    Hello everyone.

    I think the exchange of the wireless network card in my Probook 4520 s, due to the low flow.
    So I searched for a while a 5 Ghz supporting the card and found out that I am only able to get in the "white" cards list working. Then I looked at this page:

    http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en & CC = US & objectid = c02487851 & jumpi...

    These cards can be any, that have been used in 4520 s. Mine (according to the Device Manager) is the Broadcom 4313 802.11b/g/n. This thing only supports 2.4 Ghz. Now, I looked at the list for a 5 Ghz supporting the card. I think that the 802.11A/B/G/N WLAN Intel HMC 572520-001 minicards can operate on 5 Ghz, because I read, that A appears only with maps of 2.4/5 Ghz. I read too, that maps of 2.4 / 5 GHz have 3 antennas, but on this card I only the slots for 2. Is this good? And this card would go into my 4520 s?

    Greetings,

    Colony

    Hi, colony:

    You are right about your statement about the cards being described as A/B/G/N dual-band.

    The best thing to do is look at Chapter 3 of your service manual.

    You can only order one of the cards listed as supported and it MUST have the HP reference on it or it won't work.

    I see only two possibilities for you...

    The 6200 Intel and Broadcom 4322.  Make sure you also get the part # that corresponds to what country you live.

    If your current Broadcom card has integrated Bluetooth, you will lose your Bluetooth capability if you order an integrated HP bluetooth module and probably the cable too.

    None of the dual-band cards have embedded bluetooth.

    Link to the service manual.

    http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c02439213/c02439213.PDF

    Then, you can order a card on the link below.

    If you do not live in the United States, you can change your country at the top of the page to yours.

    http://h20141.www2.HP.com/hpparts/default.aspx?mscssid=6857BCBBC4CD4470B9282F130A563697

    Paul

  • Can satellite M65-S9092 - I put the wireless network card?

    Hello

    Can I put my card Intel pro 2200BG on Satellite M65-S9092 wireless network so that it is no longer compatible with Windows 7? The Intel Pro 2200BG is no longer supported by Intel as it was abandoned and so they have not issued a new driver so that IPv6 works.

    So I would update my card if possible.

    Thanks in adavnce

    Concerning
    Paul

    Hello

    I think that it shouldn't be a problem to upgrade the WLan card.
    As far as I know its a card wireless network of miiPCI and you would need to also use a WLan card which would support the miniPCI interface.

    The wireless network card supports two pins for the WLan antenna cable.
    Usually, you must connect a white cable to the HAND and a black to the auxiliary voltage

    All that s

  • How to upgrade the wireless network card in Windows Vista

    Hello

    Please how can I update the wireless network card?

    Thanks for the help

    Hello

    I suggest you try the steps from the following link to update the wireless network card drivers.

    a. right click on the Start button and click on Device Manager.
    b. display all devices on one.
    c. right-click on the WLAN driver and click on Update.

    Display us the results, once you try the steps above.

  • Able to detect the wireless network but cannot connect

    Help, please!

    I have a HP Pavilion DV6 using Windows Vista 64-bit.

    My network wireless adapter intel is able to detect wireless networks three on my College campus.  I know that these networks is currently (I can access it on other devices and my suitemates can view them on their laptops.

    When I double-click a network dialog box appears and informs me that the laptop is currently connected to the network.  After about 30 seconds it says it is unable to connect and an opportunity to try the troubleshooting options (which, alas, never work).  I recently tried to download the latest drivers for the network adapter, but also, it does not work.  The adapter is turned on via the switch on the keyboard and the HP Network Assistant.

    What should I do?

    Hello

    You have a few options in my opinion please try these steps can help you solve your problem.

    (1) unplug the battery adaptor & then press on & press and hold the power button for laptop for 30 seconds then switch on and check if the wireless led lights.

    (2) go to Device Manager then uninstall the drivers wireless network card and restart the device and check if the light is on.

    (3) try to do a system restore to the date where unit was working fine.

    (4) Please update the Bios driver & wireless from the HP website.

    (5) click on start search type Recovery Manager, and then click on it once select Yes on user access control, and then select I need immediate help and then select driver and select request recovery driver wireless and install it and then restart the device.

    (6) If you are comfortable with reinstalling the wireless card that will be on the rear panel of your device you can try this steps as well.

    If you still have the same issue then you need to call HP tech support and get the replaced part.

  • Cisco linksys router and cannot access the wireless network

    We have cisco linksys wireless router.  When we installed everything first, we could connect our wireless laptops to the network.  Now, however, the network is detected, but there is no access to the internet.  We have even a guy from ATT were out and he said that the wireless router has been installed backwards?  He installed a dsl fast access on our laptop icon, and now we can access the wireless network but only if we connect as the first.  We can also connect iPod to the wireless network.  They detect the network, but when we enter the password cannot connect.

    Hi JC_3094,

    Welcome to the Microsoft Community and thanks for posting the question.

    According to the description, it looks like you aren't able to access the Internet.

    The likely causes of this problem is if the router is not configured properly.

    Here are some steps that should help you to solve this problem.

    Method 1:

    Check if the router is configured properly to get access to the Internet.

    Method 2:

    Try the steps mentioned in this link and check:

    This tutorial is designed to help you identify and solve problems with a wired (Ethernet) and wireless (Wi - Fi) network connections in Windows.

    Wireless and wired network problems
     
    Method 3:
     
    If there is a frequent disconnection try to update the firmware on the router and check.
     
    In addition, visit these links for more information:
     
    Why can't I connect to the Internet?
     
    Hope this information helps. Respond us if you have any questions with windows and we will be happy to help.
  • HP LaserJet Pro CM1415fnw color multifunction printer - cannot FIND the WIRELESS NETWORKS

    PRINTER: HP LaserJet Pro CM1415fnw color multifunction printer

    OS: Windows 7

    OWNER: More than 2 years without any problem

    LOCATION/SET-UP: To my personal residence. All-in-one router through the cable company.

    QUESTION: Suddenly, printer cannot find wireless networks. Nothing has changed recently in my service provider or equipment. I know that the router and the internet is not the problem because our 2 smart phones and three laptops still not connect. I triend manually configure the network using the SSID and key phrases, but still nothing.

    Help!

    I would like to perform a hard reset by removing the power of the whole machienethrough the power cord for 30 seconds. Depending on whether I have would reconnect the printer to the wireless network and set a static IP address.

    -Spencer

Maybe you are looking for