Portege 3500 - upgrade memory

Similar Questions

• Portege 3500: upgrading WiFi 802.11 g

  Hello

  I have a Toshiba Portege 3500 Tablet of 1.3 ghz. It comes with 802. 11 b WIFI configuration. I was told it take a MINI PCI card. Anyone know if I can switch to 802.11 g... If If have a URL

  What about Jazz

  Hello

  One of my friends has done and it works perfectly. He told me that he used the mini of Agere PCI Wireless card.

  Good bye

• Portege 4010 - upgrade memory

  I have a Portege 4010 and cannot find the expansion Bay of memory to upgrade the memory. Under my laptop's hard drive battery, dvd and what I think should be the memory, BUT it has 2 wires attached to it.

  Hello

  Memory modules are hidden under the keyboard!
  You will need to remove first a plastic cover to think above the keys F1 to F12.
  Then you should find 2 screws holding the keyboard.

  Please be careful because the keyboard is connected to the motherboard with a thin flat cable

  Then, you could see the memory modules. Gently press the two latches.
  One end of the strip of memory expansion will pop up. Enter the module memory expansion, then take it out.

  I hope this helps...

• Portege R100: upgrade memory

  I´d like upgrade my R100 with a 1024MB key. Can I use the memory with the following specifications?

  DDR266 PC2100 SODIMM 200-pin

  Or are there things more I ve to watch? Or is there still to be a special memory for the R100 custom?

  Thanks for the tips!

  Yes, definitely Yes!

  According to the information on this page, you can use PC2100 200 pin memory (266 MHz) DDR SODIMM
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=7233&ft=m&St=3

  It seems that there is only one slot for expandable memory. Therefore, you can use a 1024BM of modules like max.

• Upgrade memory on Portege 4010

  I want to upgrade my memory Portege 4010 and I know that I need 144 pins/PC133 SO - DIMM SD - RAM. Unfortunately I couldn't understand (in the same after talking to the Toshiba Austria), if I have to buy memory may be high or low density.

  Most of the memory at low prices on eBay is high density and I'm afraid to buy an incompatible.

  I hope that someone already has experience with it. It seems to be my last chance to get some relevant information.

  Thank you.

  As I remember for Portege 4010 maximum memory is 1 GB (2 x 512 MB) and no matter if you choose the version high or low density.
  If you need 100% guarantee you choose the version of low density.

• upgrade memory in a Portege 3410ct

  I tried installing memory of 128 MB PA3034u 3410ct, but on commissioning a message comes up saying that the ACPI BIOS is not fully compliant with the ACPI specification.
  I downloaded the latest BIOS setings but makes no difference. Will not start just yet. Clues as to correct the problem, other that not upgrading memory.

  Hello!

  This problem may occur if you add the memory (RAM) to the computer when it is in hibernation.

  When the computer comes out of hibernation mode and load the file Hiberfil.sys, Microsoft Windows detects the change in the State of the memory, and then you receive the error message.

  To resolve this issue, restart your computer.

  If the problem persists, start the computer by using an emergency boot disk, and then delete the Hiberfil.sys file.

  Good bye

• Question about the Installation of Windows XP on Portege 3500 home

  I have a second hand Portege 3500 with WXP tablet 2005 Server Pack 2 market version, but without the original disks. However, recently had a virus that did something to Prime the area on the hard disk. I have removed the virus but now get unexpected core dumps memory and system restarts when you try to connect to the internet.

  Question: can I go down a level and safely install ordinary WXP software to work around the problem or the acquisition of new version of WXP Tablet and reinstall the software to circumvent the problem of core dump?

  Installation of an operating system on this laptop, it's the hardest thing I have ever tried to do. Once start you, you will notice that there is no device boot attached to this pc. To install windows, yourself, the only options are to buy the cdrom drive for this laptop toshiba external or install via a network.

  The toshiba cdrom drive is now quite obsolete, more expensive and the external device only that the laptop starts from (I tried with the other external cdroms, DVDs, disks usb keys and hard). It seems extremely difficult to boot from lan unless you already manage it infrastructure of the company. It is possible in theory, but after 3 weeks I still hadn't thought about her.

  My solution at the end of the day was to send it to my local toshiba support center and ask them to re - install for me (he happened to have one in stock toshiba cdrom burners). I got the installation cd, so I guess you will need get these images from toshiba as well (or buy another os).

  Good luck!

• Wireless driver is not install on Portege 3500

  Tosh Portege 3500 with ' Toshiba wireless lan mini pci card.
  XP SP2 tablet Edition

  I want to upgrade the driver of 7.43.0.9 to the new site 7.63.0.9 (because I need WPA security)

  The process seems to be okay, I chose wlags48.inf, several copied files, BUT in the end, I get the message
  An error occurred during the installation of this device
  Access is denied

  I can go back to the old driver tbhe without problem

  I tried to disable the adapter and even turn it off with the switch

  I tried to do the upgrade mode safe

  Anyone has any suggestions please?

  Steve

  Hello Steve

  I'm really skeptical about WPA security, but maybe you can relate more after installing the driver successfully. Download driver driver and extract it to the new folder created somewhere on the desktop. When you start the driver installation please choose the advanced option and navigate in that order.

  As far as I know you should not choose anything just browse in the right folder. Please try again.

• Upgrade memory on an all in a single LX830

  I may upgrade the 4 GB provided to meet the requirements of the program. Additional memory needs to be installed in pairs? The existing 4 GB occupies a dwelling, can I mount 8 GB in another location or it will be incompatible?

  Well, mainly upgrade memory depends on the support of the chipset/CPU.

  Not quite sure what computer Toshiba LX830 do you have exactly but as far as I know the L830 all in one units would support up to 16 GB of RAM.

  A property used by a 4 GB RAM module and housing is free.
  This is why it must be able to use another additional module of 8 GB RAM.

  But of course, another module of 8 GB RAM should be compatible with the current 4 GB of RAM.
  Otherwise, you will get some compatibility issues

• Upgrade memory on NB300-108

  Looking to upgrade the RAM to 2 GB on my NB300-108

  Have you looked at the website of Toshiba and the cost, but there seems to be a plethora of alternative sites with upgrades memory compatible when I put in the part number.

  Would like to receive experiences in the forum about alternatives etc.

  Thank you

  Hello

  The laptop supports DDR2 800 MHz SO-DIMM or PC2-5300 (DDR2 667 Mhz) modules.
  These modules are provided by different companies.
  There are good quality modules and less quality modules

  Of course, you can choose and buy the cheapest, but in this case, you use the risk of compatibility problems.

  I made good experiences with RAM from Kingston. These are of good quality and not too expensive modules

• Upgrading memory on the NB550D - 11 d - 4 GB of RAM are possible

  To anyone who thinks of a memory upgrade on the NB550D:

  The NB550D supports up to 4 GB of memory, not only 2 GB as mentioned by Toshiba in their specifications.
  Upgrade memory to 2 GB is _only limited_ by the pre installed Windows 7 Starter OS, and not by the netbook itself.

  I use Linux Mint 11 Katya, 64-bit and my system works perfectly well with a 4 GB ram module. If you want to use the full support for 4 GB ram, get rid of the Win 7 Starter operating system.

  Specifications for more memory ram volume are DDR3 1333 MHz PC3-10600 SO-Dimm. I chose a 4 GB of Corsair module, because of the guarantee of 30 years of offers from Corsair.

  It took me a while to find this out hope, that this will be a help to all those who are just as secure as I was how to upgrade memory NB550D. Good luck. (o).

  Thanks for the comments

  Also it of important to mention than the 32-bit systems (not serious if its Linux or Windows) would recognize only 3.2 GB since it is a limitation of 32-bit
  So to use all of the 4 GB RAM 64-bit system is required.

• Question about upgrading memory Satellite M55-S1001

  can you please recommend what to do? I want to make my satellite m55-s1001 run faster please let me know, what do you recommend: 512 MB or 1 GB of memory? I'm not familiar with updates so please help!

  Hello

  First of all, if you want to go for fastest laptop, you should start with simple things.
  Try to defragment the disk, turn off the background process is not necessary, etc.
  Upgrade memory will the powerful laptop and of course a lot more quickly.

  To my knowledge the Satellite M55 should support the bars of memory 2 x 1024MB, and I also recommend the use of 1024MB instead of 512 MB module.

• How to boot from Portege 3500 - instructions

  I discovered far from starting form Toshiba Portege 3500 and laptop now mt work.
  Email me [email protected] for help

  Hello

  Thanks for the offer, but it will be nice if you can post your instructions here.
  A lot of people read this forum and this is the right place to post some useful instructions.

  Good bye

• Need drivers for Toshiba Portege 3500

  Hi I m new to the forum.

  I have the problem. I can't find t on Toshiba support drivers and utilities for this model, where can I find all this kind of software (console, saving etc..)?

  Hello!

  First of all, welcome in the forum!

  Have you searched the Web from Toshiba site? You will find all the drivers who need you for this model.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers
  * Archive *-Portege-online Portege 3xxx-online Portege 3500 online

  Good bye

• Portege 3500 - problems pcmcia

  Hello
  I bought a reader of external cd for my portege 3500.
  This is the original toshiba drive (connectet via a pcmcia 32-bit card and bootable)
  I run WindowsXP Tablett Edition on the tablet.

  When I plug the device in the slot pcmcia, nothing happens. (Windows Device Manager indicates also nothing new)
  Should I have all the drivers to use pcmcia devices or do I have to change something in the bios?

  The reader is 100% working, I tested it with another laptop.

  Hope you can help me
  Leon

  Look in the BIOS for a setting that allows you to switch between <->CardBus PCMCIA mode.

  Ensure that the slots are running ok in Device Manager.

  You have another PCCard you can test in the laptop?

  It is possible that the pins inside the PCMCIA slot can be bent or broken. Look in the slot with a torch and make sure that all the stems are straight.