Portege 3500 will not start on PCMCIA - tablet PC 2005 installation
Hello
Sorry for my English, I'm french
I want to reinstall a tablet PC 2005 Edition.
I have a portege 3500 with CDROM PCMCIA reader.
Tablet PC does not start on PCMCIA...
Help me
TKS
Hello
I found a very interesting document of the FAQ on the Toshiba site:
Procedure of product recovery and Bootdisk (FD) for the Portege 3500 Series.
http://support.toshiba-tro.de/KB0/TSB6101CA000ER02.htm
It should help you get started on the PCMCIA drive.
In any case, this theme has been discussed a lot of time here in the forum.
Please check other threads:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=5926
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15336&MessageID=55939
Give us a feedback if you succeeded.
Tags: Toshiba
Similar Questions
-
Portege 3500 will not start up disk
Hello
I recently acquired the laptop above. I decided that I would try to reconstruct it, bad idea.
I don't have an external CD or recovery CD but I have another laptop and a Windows XP CD.I removed the HARD drive the 3500 and put it in my other laptop. I formatted the drive and installed windows. Everything worked Ok and good boots in my other laptop. When I put the disc in the 3500 however, it will not start. All I see is a black screen, not even a cursor or any error.
I tried to format the drive again and the sys'ing, it does not work. I tried installing on my other laptop then continue on the 3500 but that doesn't work either.
I was wondering if the 3500 was looking for a partition that I deleted. I don't see why it will not start when start up ok in my other laptop HARD drive.
Someone at - it ideas?
Thank you
SimonI don't think that this has nothing to do with the score. You get the black screen, because the other laptop is quite different installed on Windows ACPI etc.
If you have a usb floppy drive try this:
1 partition and format the disk with Fat32 (or fat 16).
2. from your installation CD copy the i386 on the partition directory (attach the HARD drive to another laptop)
3. start the P3500 leave a floppy disk bootable BACK, change to the I386 directory and start the winnt.exe -
This message to Tom Mannerhagan.
Tom,
Am down to the tocdrom of the access and the HARD drive.
Start A player
RAMDrive Q
UBCdrive T
And a flashing Q:\ > (which is access BACK?)
You can talk to me through the last part.
Which folder? How can I copy it a temp on the HARD drive?
When I insert the XP disk it prompt me? Usually it starts just the starting load.
Furthermore, it shows only 3 stars on the side. I gave you 10. If I made a mistake and then will try and understand well this time!Martin
Hi Martin
So sad to hear that you have paid for it but nice to hear that you finally have the access you need.
-Insert the WIndows XP CD
-Create a folder i386 to the HARD disk by writing the following after the command prompt: MD c:\i386
Don't mind large or small letters. If you get an error message that the file already exists, then you must remove the old one.
Do this by writingDELTREE c:\i386
and confirm on Y
After that, again try to create the directory by writing
MD c:\i386and copy the contents of the CD to the HARD drive by writing
xcopy t:\i386 c:\i386/e
This will take some time so do something else for a while.
When finished, start the installer with
c:\i386\winntYou will receive a message that smartdrive wolud improve installation speed but I don't think that there is a software cache'ing available on CD and I can't find one on the BootCD so you have to manage without one.
Good luck
Tom
PS thanks for the points
-
Portege R100 will not start up CD
I have a r100 and has now no OS and worse still it used to boot from external cd please can someone advise me how can I reload windows xp and have my computer back
Hello
What external hard drive that you are using?
I read in this forum of Toshiba that not all external drives are compatible.
You need a support if you want to boot from the CD!You know the knowledge base of Toshiba?
I studied at this page and found this article:Portege R100 taken care of recovery disks
http://support.toshiba-tro.de/KB0/TSB5100S70004R01.htm -
Hello
Can anyone help?
My Portege 7220 Wona? t recognize the CD-rom drive in the docking station. The hard drive has been erased completely before I bought it with no recovery disk.
Any suggestions or comments would be useful.Hello
Hello
I found an IDE driver lying on the Toshiba driver page.
Scope of the IDE Controller Driver Toshiba V1.01.01Supported features:
(1) DMA33 Mode2 ultra / MWu DMA Mode2
(2) CD/DVD-ROM LAN Docker Hot DockingBut as San Remo said check the page and choose the drivers for your operating system.
-
as above
Hi graham50,
I suggest you to go to the link below and perform a startup repair and do a system restore and that might take care of the issue.
http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
Go to the link below for the procedure perform system restore.
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
Concerning
Varun j: MICROSOFT SUPPORT
Visit our Microsoft answers feedback Forum
http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
HP Mini 110-3500 does not start
HP Mini 110-3500 will not start. When I try to start I get a prompt back "BOOTMGR is missing" & «Press Ctrl + Alt + Delete to restart»
I tried a "Factory Image Restore" and it failed with an ERROR msg '0xe0efooo3 '.
Any help is appreciated.
Sorry to hear that Geezer.
You need to replace the HARD drive and reload the operating system.
REO
-
Can someone help me please. My Portege R100 does not start, when I turn the following text appears: in touch with tomorrow toshiba. After a few seconds a black screen with a blinking cursor on the left side of the screen.
Thank you very much
Hi Rehana,
The Toshiba screen you will see first is the initial start screen is displayed while loading the BIOS. Once the BIOS has completed its process of loading, the system tries to boot the operating system and it is at this point that you have found the black screen with the blinking cursor in the upper left.
Unfortunately, this indicates usually that the laptop can not load the operating system from the hard drive, or because the hard disk itself has not the contents have been damaged somehow.
You might try to charge your laptop in 'safe' mode (press F8 during the initial loading of the BIOS) or you can try to boot your laptop from a bootable CD/DVD and hard drive.
Finally, you can try to re - install your OS from the recovery CD.
Kind regards
-
Sidebar.exe will not start
Hello, Microsoft community.
My problem is, sidebar.exe will not start. He does not appear in the Manager of tasks and does absolutely nothing when I run the executable file.
I have a new laptop, just installed Windows 7 Ultimate 64 - bit on it. Now, here's what I just did after installing Windows:
1 remove some windows components:-IE
-Windows media center
-Games
-Tablet components
2 installed all updates and drivers needed
3 optimized for SSD Windows (I installed on the SSD and HDD extra for Windows files):
-moved my user on an internal HARD drive folders
-off hibernazation
-a rejected the files on the system drive for the content index
-Move page file of SSD to HDD-people with disabilities Prefetch and Readyboot
To solve the problem, I tried (I rebooted after each operation):
-running sfc/scannow (says it fixed a few errors, but eventually I saw no changes)
turn the component Windows Gadgets
-in the course of running sidebar.exe administrator
-installation of hotfix (http://support.microsoft.com/kb/979164) - said that it is not compatible with my setup.
I really hope that the information is more than enough and can someone help me solve the situation.
Hello
Glad to know that you were able to resolve the question and thank you for sharing the information with us. For more information on this update, see Microsoft KB article:
The fix it solution described in this section is not designed to be a replacement for any security updates. We recommend that you always install the latest security updates. However, we offer this fix it solution as an option for workaround for some scenarios.
MS13-038: Internet Explorer security update: May 14, 2013
http://support.Microsoft.com/kb/2847204/en-us
Thank you and best regards,
John
-
Somewhere, I messed up my permissions, turn off the computer to see if it helped, now will not start at all. The start bar stops a quarter turn along. I tried in SafeMode as well do. I ' on a Yosemite iMac running. I can't enter to give more details. Can anyone help? There are a load of work due to deliver to the printing press Monday
Have you tried to boot from the Partition Recovery and repair then the disc from there, using disk utility?
-
G5 will not start. LED light on. Fans before working.
Early 2005 G5. running 10.5.8.
G5 will not start. LED light (no flashes not but solid). Fans before working. Rear fans blowing not. Cleaned up the dust. A exploded during a down and will not restart. Any thoughts? Is that a bad diet? What I would do. Thanks for any help. I love this old computer and hope to keep fixed and working.
Sam
Some of the fundamental things include the pram/clock battery replacement
since they may be dead; then with a power failure, sometimes the Mac
do not restart. Usual power management unit & reset NVRAM/PRAM are
methods that sometimes also used as a troubleshooting measure.
• Reset the Mac chip power management: (see SMU)
http://www.thexlab.com/FAQs/resetpmchip.html
• How to reset NVRAM-LANDAU on your Mac - Apple Support
A hard reset can sometimes be used, where the power is disconnected
the logic board and power removed from grill; Then push the Start button / stop.
(But maybe not. Several PowerMac computers, I had, some people found this helpful)
You may also remove and reposition cards and other items
the inside of the case, to be sure they are connected properly. Be sure to not
In short anything, due to the static load or residual power in the circuits.
The hour is late here, so I'm not going offline; If all goes well a battery original or novel, etc.
can help to put it on again. Also sometimes the power supply has some faulty fans,
circuits or capacitors, so they can be troublesome to repair or replace.
Good luck in this case!
-
Firefox will not start after update
Firefox will not start today. I think he had an update yesterday.
Click it, lift the loading symbol, but never implemented. In Task Manager it is a firefox.exe * 32 running. Have you tried to uninstall, delete Mozilla Firefox folder in Program Files x 86 iti also tried to suppress the appdata profile (after saving the Favorites and passwords). I can't even boot up in firefox safe mode and can not get to start Profile Manager. If I start (7 x 64) of windows in safe mode, I can start firefox. I use Norton Internet Security. I checked the settings of firewall smart and experienced of firefox is still set to allow. I tried starting firefox with smart firewall turned off and firefox still refuses to start
Renounce top almost readyHello ziggy1, as this can sometimes be caused by a malware active on a system, please run a scan with tools of different security like the free version of malwarebytes, the adwcleaner and the scan to microsoft security.
-
Carillon of boot loop - start 2011 MBP will not start.
I have a start 2011 15 "MBPro8, 2
Quad Core Intel Core i7
2.30 GHz
Boot ROM version: MBP81.88Z.0047.B2A.1506082204
Intel HD Graphics 3000 VRAM:512 MB
AMD Radeon HD 6750M VRAM:1 GB
8 GB of RAM 1333 MHz DIMM0
It will not start. Trying to start the machine, it enters a loop-
1. startup chime
2. grey screen with Apple
3. the small wheel starts to turn under the Apple
4. the screen goes black
... and the cycle starts over.
The computer does not start in Mode safe. In an attempt to safe mode the loop above has the addition:
3. a progress bar is displayed but does not progress.
I have reset the PRAM
It will start up in target Mode, so I was able to recover data
In target Mode, I was able to run first aid utility on the drive. This has not fixed the problem.
I can hold down the Option key and see Macintosh HD and the recovery Partition. If I try to boot from the recovery partition, I get the same loop.
I can start in the Test of online material, which revealed no material problems
I can boot in Verbose mode and it always happens in the same place
Execution fsck_hfs (version 226.1.1 of hfs)
BootCacheControl: cannot open /var/db/BootCache.playlist: 2 no such file or directory
' ' It would be possible for me to insert the "var/db/BootCache.playlist" file using target disk mode?
Other thoughts?
Check Google for this error, it seems to be common.
Apparently the startup configuration file is corrupted. These 2 articles can be useful:
http://www.Hackintosh.computer/?p=67
https://www.iFixit.com/answers/view/192201/unable+to+open+-var-db-BootCache.play list % 3A + 2
-
Does anyone know how after I connect to my office 2008 Mac (which will not start.) to my computer laptop (2013 Mac Air). What are the steps that I need to know to get the Desktop files is displayed on my mac air so I can copy files to your laptop, especially my Itunes folder.
Thanks Jerri
If you can't get the iMac began and ongoing implementation, you will not be able to use the target disk Mode:
https://support.Apple.com/en-us/HT201462
Then the option is to take the iMac HARD drive, install it in an enclosed, and connect the HARD drive to the MBA via the USB port. If the HARD drive is recognized, you can copy the data out of it.
Ciao.
-
Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process, but do not remember.
Tried running firefox.exe Pei but error message:XML parsing error: the undefined entity
Location: chrome://mozapps/content/profile/profileSelection.xul
Line 18, column 1:
"< dialog < =" "^ =" "p =" "> < / dialogue >Running on Windows XP SP3. No problem whatsoever before moving to 27. Sending of Chrome that I can't open Firefox at all.
Thank you, jschaer2000. In the meantime, he works. How long, we'll see ;-)
Maybe you are looking for
-
Modules, which are updated already installed and running (and have been for awhile), seem to think that they are not added. Looking at my modules in the Tools menu, they are listed as enabled. However, clicking to access their information page on the
-
Backlit keyboard has stopped working on Satellite P50-A-12Z
I bought my P50 A 12Z Satellite a year ago, and in recent weeks the backlit keyboard has stopped working. I used to hold the FN + W to toggle the keyboard light, but now it no longer works and I have the message "chronometer" on the top right of the
-
DAQmx custom scale: How do you define minimum and MAXIMUM values?
Hello everyone, I am currently using LabVIEW 2010 and meet the following problem with DAQmx custom scale: first, I created a custom linear scale (ordered originally = 0, slope = 50) and then a string that uses this scale. The real signal acquired fro
-
No functioning Microsoft Fix it Center
I just downloaded the Microsoft Fix it Center, but when I open it I get the advice shows: The device information: Microsoft Fix it Center does not detect all configeration hardware on this computer. History of diagnosis: no convenience stores are run
-
I do not use outlook express and still get msg, oe can compact the message. How to stop
I do not use outlook express and still get msg, oe can compact the message. How do I prevent this every time that I turn on computer to come.