Portege 3500 will not start up disk

Similar Questions

• Portege 3500 will not start on PCMCIA - tablet PC 2005 installation

  Hello
  Sorry for my English, I'm french
  I want to reinstall a tablet PC 2005 Edition.
  I have a portege 3500 with CDROM PCMCIA reader.
  Tablet PC does not start on PCMCIA...

  Help me
  TKS

  Hello

  I found a very interesting document of the FAQ on the Toshiba site:
  Procedure of product recovery and Bootdisk (FD) for the Portege 3500 Series.
  http://support.toshiba-tro.de/KB0/TSB6101CA000ER02.htm

  It should help you get started on the PCMCIA drive.

  In any case, this theme has been discussed a lot of time here in the forum.
  Please check other threads:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=5926
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15336&MessageID=55939

  Give us a feedback if you succeeded.

• Satellite P300-1 c 8 will not start up disk drive

  Hello

  I had a little play with the start up programs, partitioning the hard drive and the marking as assets and remove programs I thought I didn't need.
  I of course had no idea what I was doing!

  Laptop will go to toshiba screen then turns off, I can not boot from the hard drive.
  I put the hard drive in another laptop and it works fine.
  J’ai mis le disque dur de l’ordinateur portable dans le buggered un et qui fonctionne très bien.

  How the hell can I put the original back with it works?

  Really really stuck with it!

  Any help would be appreciated.

  The only thing I have not tried is the restore disc but I'm not paying for one if it does not start as itl be a waste of money.
  Looks like it is a compatibility issue with the processor and hard drive because they won't be friends!

  Thanks in advance

  Hello!

  You can start in safe mode?

  If you don t have a recovery disk, use the Microsoft installation disc and try to boot from it.
  And you said that you can boot from the hard t disc, done you have tried different discs?
  Maybe some are not legible or not bootable.

  The best way would be a recovery disk. The installation takes a few minutes and you have a clean install with all the drivers and tools of Toshiba.

  Good bye

• Portege R100 will not start up CD

  I have a r100 and has now no OS and worse still it used to boot from external cd please can someone advise me how can I reload windows xp and have my computer back

  Hello

  What external hard drive that you are using?
  I read in this forum of Toshiba that not all external drives are compatible.
  You need a support if you want to boot from the CD!

  You know the knowledge base of Toshiba?
  I studied at this page and found this article:

  Portege R100 taken care of recovery disks
  http://support.toshiba-tro.de/KB0/TSB5100S70004R01.htm

• Portege 3500 will not load XP

  This message to Tom Mannerhagan.

  Tom,
  Am down to the tocdrom of the access and the HARD drive.
  Start A player
  RAMDrive Q
  UBCdrive T
  And a flashing Q:\ > (which is access BACK?)
  You can talk to me through the last part.
  Which folder? How can I copy it a temp on the HARD drive?
  When I insert the XP disk it prompt me? Usually it starts just the starting load.
  Furthermore, it shows only 3 stars on the side. I gave you 10. If I made a mistake and then will try and understand well this time!

  Martin

  Hi Martin

  So sad to hear that you have paid for it but nice to hear that you finally have the access you need.

  -Insert the WIndows XP CD
  -Create a folder i386 to the HARD disk by writing the following after the command prompt: MD c:\i386
  Don't mind large or small letters. If you get an error message that the file already exists, then you must remove the old one.
  Do this by writing

  DELTREE c:\i386

  and confirm on Y
  After that, again try to create the directory by writing
  MD c:\i386

  and copy the contents of the CD to the HARD drive by writing
  xcopy t:\i386 c:\i386/e
  This will take some time so do something else for a while.
  When finished, start the installer with
  c:\i386\winnt

  You will receive a message that smartdrive wolud improve installation speed but I don't think that there is a software cache'ing available on CD and I can't find one on the BootCD so you have to manage without one.

  Good luck

  Tom

  PS thanks for the points

• Portege 7220 will not start

  Hello

  Can anyone help?
  My Portege 7220 Wona? t recognize the CD-rom drive in the docking station. The hard drive has been erased completely before I bought it with no recovery disk.
  Any suggestions or comments would be useful.

  Hello

  Hello

  I found an IDE driver lying on the Toshiba driver page.
  Scope of the IDE Controller Driver Toshiba V1.01.01

  Supported features:
  (1) DMA33 Mode2 ultra / MWu DMA Mode2
  (2) CD/DVD-ROM LAN Docker Hot Docking

  But as San Remo said check the page and choose the drivers for your operating system.

• HP Mini 110-3500 does not start

  HP Mini 110-3500 will not start. When I try to start I get a prompt back "BOOTMGR is missing" & «Press Ctrl + Alt + Delete to restart»

  I tried a "Factory Image Restore" and it failed with an ERROR msg '0xe0efooo3 '.

  Any help is appreciated.

  Sorry to hear that Geezer.

  You need to replace the HARD drive and reload the operating system.

  REO

• I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or the usb ports

  Help with my computer of dumping

  I have windows xp and I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or usb ports. How can I do this without the disc?

  If there is anything physically wrong with your hard drive, you can use Darik Boot and Nuke (DBAN aka) to make a scrub of the security of your HARD drive. Glance to download here.

• CS 5 will not start. Scratch disk cannot be found. How can I get photoshop to start?

  CS 5 will not start. Scratch disk cannot be found. How can I get photoshop to start?

  Hi Rsrich,

  Please follow the steps below to reset the Photoshop preferences.

  > Hold down the SHIFT key, command and Option (in Mac) or shift, Ctrl, and Alt (Windows) key and click on the Photoshop CS5 icon until you get a dialog box to delete the settings of Photoshop file.

  > Click Yes to it.

  Note: Using the hotkey, preference files for custom shortcuts, workspaces, and color settings will also reset to the default.

  Also, please mention the operating system you are using.

  Let me know if it helps.

  ~ UL

• Recovery disk will not start on Satellite 1110

  I try to use the recovery on a Satellite 1110 CD. I want to just install fresh Windows. The necessary files are supposed to be on the Toshiba recovery CD that accompanies it.

  So I did what the brochure says, and booted up the laptop to the top with the correct CD in the drive, while pressing 'C '. The notebook ignored the CD ROM and loaded Windows as usual. I repeated three times, each time that the CD ROM whirs a bit but will not start and Windows loads as usual. I have replaced 'C' for F12, chose the CD ROM drive in the list and repeat the process several times. Yet once it wouldn't boot from the CD-ROM.

  I looked at the content of the CD ROM A single MB 447. File of the GHS. The file icon is that generic type "Windows does not know what program this icon is intended to" deals.

  Google believes it is a ghost file and must the ghost installed to run it. This bitch never came with Ghost.

  Anyone here knows a remedy to this problem?

  (NB - I tried clean Windows system restore option, but it just brings back me to September this year. Theres no option that was more early in life for portable computers)

  I am in the United Kingdom, and is a UK machine if that makes a difference.

  Hello Micha

  Is this your ODD works properly with the operating system?

  I put really know what exactly is happening here, but please make sure that you start with recovery CD number 1/2 2/2. The installation of recovery, you can just start with the first recovery CD. Also try please set CD-ROM as firs boot device in the BIOS.

• Pre installed Vista on iQon will not start. No available disk. The manufacturer had to cease their activities. I have the product key for Vista. Buy a Microsoft store repair disc?

  IQON laptop manufacturer had to cease their activities. Pre installed Vista - no disc. Vista will not start. Unable to access restore or recovery mode.

  Hello

  There is no Windows Vista downloads available from Microsoft.

  And Microsoft sells more than Vista.

  Try this:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to the website of the manufacturer of your computer (In your particular hardware manufacturer case) and get the latest drivers for your particular model computer or laptop.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If you want to try the Startup Repair tool, read this information:

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.

• Portege R100 does not start

  Can someone help me please. My Portege R100 does not start, when I turn the following text appears: in touch with tomorrow toshiba. After a few seconds a black screen with a blinking cursor on the left side of the screen.

  Thank you very much

  Hi Rehana,

  The Toshiba screen you will see first is the initial start screen is displayed while loading the BIOS. Once the BIOS has completed its process of loading, the system tries to boot the operating system and it is at this point that you have found the black screen with the blinking cursor in the upper left.

  Unfortunately, this indicates usually that the laptop can not load the operating system from the hard drive, or because the hard disk itself has not the contents have been damaged somehow.

  You might try to charge your laptop in 'safe' mode (press F8 during the initial loading of the BIOS) or you can try to boot your laptop from a bootable CD/DVD and hard drive.

  Finally, you can try to re - install your OS from the recovery CD.

  Kind regards

• Somewhere, I messed up my permissions, turn off the computer to see if it helped, now will not start at all. The start bar stops a quarter turn along. I tried in SafeMode as well do. I ' on a Yosemite iMac running.

  Somewhere, I messed up my permissions, turn off the computer to see if it helped, now will not start at all. The start bar stops a quarter turn along. I tried in SafeMode as well do. I ' on a Yosemite iMac running. I can't enter to give more details. Can anyone help? There are a load of work due to deliver to the printing press Monday

  Have you tried to boot from the Partition Recovery and repair then the disc from there, using disk utility?

• Carillon of boot loop - start 2011 MBP will not start.

  I have a start 2011 15 "MBPro8, 2

  Quad Core Intel Core i7

  2.30 GHz

  Boot ROM version: MBP81.88Z.0047.B2A.1506082204

  Intel HD Graphics 3000 VRAM:512 MB

  AMD Radeon HD 6750M VRAM:1 GB

  8 GB of RAM 1333 MHz DIMM0

  It will not start.  Trying to start the machine, it enters a loop-

  1. startup chime

  2. grey screen with Apple

  3. the small wheel starts to turn under the Apple

  4. the screen goes black

  ... and the cycle starts over.

  The computer does not start in Mode safe.  In an attempt to safe mode the loop above has the addition:

  3. a progress bar is displayed but does not progress.

  I have reset the PRAM

  It will start up in target Mode, so I was able to recover data

  In target Mode, I was able to run first aid utility on the drive.  This has not fixed the problem.

  I can hold down the Option key and see Macintosh HD and the recovery Partition.  If I try to boot from the recovery partition, I get the same loop.

  I can start in the Test of online material, which revealed no material problems

  I can boot in Verbose mode and it always happens in the same place

  Execution fsck_hfs (version 226.1.1 of hfs)

  BootCacheControl: cannot open /var/db/BootCache.playlist: 2 no such file or directory

  ' ' It would be possible for me to insert the "var/db/BootCache.playlist" file using target disk mode?

  Other thoughts?

  Check Google for this error, it seems to be common.

  Apparently the startup configuration file is corrupted. These 2 articles can be useful:

  http://www.Hackintosh.computer/?p=67

  https://www.iFixit.com/answers/view/192201/unable+to+open+-var-db-BootCache.play list % 3A + 2

• I nned to know the procedure I use to get can Mac 2008 Desk top that will not start. I don't know how to connect two computers, my portable Mac Air 2013 on my desk, now I need to know how get the workstation files in order to appear on my mac air so I can

  Does anyone know how after I connect to my office 2008 Mac (which will not start.) to my computer laptop (2013 Mac Air). What are the steps that I need to know to get the Desktop files is displayed on my mac air so I can copy files to your laptop, especially my Itunes folder.

  Thanks Jerri

  If you can't get the iMac began and ongoing implementation, you will not be able to use the target disk Mode:

  https://support.Apple.com/en-us/HT201462

  Then the option is to take the iMac HARD drive, install it in an enclosed, and connect the HARD drive to the MBA via the USB port.  If the HARD drive is recognized, you can copy the data out of it.

  Ciao.