Portege 4000 - how to enable the WLan using W2k
I installed the driver for Lucent Wireless LAN (188.8.131.52) for this laptop that has W2K.
However, I can't control it! I also installed a wireless keyboard shortcut, but there are no instructions on it.
This laptop was initially W98SE top, and it's a fight to get this working.
The FN keys are controlled by common Modules.
Please install common Modules to obtain the essential work of the FN.
In addition, you need to install Wireless Hotkey
In addition, there are two different drivers WLan for Portege W2k. Driver Wlan Cisco and Lucent Technologies Wlan driver.
Do not forget that you are using the correct driver.
Can you help me?
My English is bad I do not end.
The question is:
My computer is a Toshiba Satellite Pro L40 and I use the ConfigFree for the wireless, but it seems that the WiFi network is disabled.
I want to know what's wrong
Your wireless network card is recognized correctly in the Device Manager, or you may notice a yellow exclamation?
Her check first because otherwise, you can get the WLAN to work.
In addition, you can activate WLAN with the material on the laptop switch which must be set on and the FN + F8 key combination.
After this Free Config should find your WLAN router if you are in the range of that.
I replaced a hard drive of mine (L500 PSLS0A - 08 p 002) and I installed Windows7 64 bit on it.
I used to market its WIFI by pressing the FN + F8 keys.
But now I can't on it using the method.
I downloaded its end drivers.
In reality its all the function keys do not work.
Please let me know how to enable the WLAN and function keys.
You have installed Windows 7 Toshiba or normal Microsoft disk recovery disk?
The FN keys to install Toshiba Value added Package, and Flash Cards Support utility. These two tools can be downloaded on the official page of Toshiba.
Check this box!
I'm new to this forum and trying to get help on the use of wireless LAN. I have no model for laptop Toshiba Satellite series S2410-504. PS241E-5G7U9-EN. According to the manual, I have TypeIIIA Mini-PCI Wireless LAN.
I try to use the same to connect to SKY broadband, but unable to do so. In "Network connections", I see only TWO connections:
1. network adapter 1394 - that I guess in the forewire network
2 Ethernet LAN - which is the wired network
I also tried using the Fn + F8 key combination to see if it is enabled, but no luck. Switch on the side of the laptop is in the position "On". Any help would be grateful and thanks in advance.
I think you have misunderstood something.
> According to the manual, I should have Mini-PCI Type III a wireless LAN.
The WiFi network is an option on this laptop. This means that your laptop could be delivered with or without this WLan card.
If Device Manager does not display the minPCI LAN card, then you laptop does not support this card! He s just not installed!
At the bottom of the unit, you should find the WLan minPCI slot. It should be placed near the memory slot.
The slot must be fixed by a screw.
However, if the laptop has no installed wireless network adapter you can upgrade the unit with a compatible.
I found a compatible Wlan card. It s the (PA3212U-1MPC) wireless LAN card number
I did a clean install of XP Portege 4000. The system has been previously default 98SE.
Noticed that there is a yellow exclamation point in other devices about the video controller (VGA compatible). I downloaded the display on the Toshiba site driver (if it is the right thing?), but can't seem to install. There is no setup.exe to help me.
My XP screen covers only 3/4 or more of the screen total, so that something is wrong somewhere...
No, Toshiba don't support Linux or Ubuntu on the Portege 4000 and you can t find drivers for it on the Toshiba page. Only Windows drivers are available.
I m not an expert in Linux, but as far as I know you don t need additional graphic driver for Ubuntu. You should only change the resolution of the screen or something in the settings of the screen. I had the same problem on the first time I used Linux and I could solve it without additional driver but I put t know how I did it :(
Hi, since I was on the dial-up connection and turn off my WIFI connection, I don't know how to turn on my WIFI, when I click on the switch for WLAN, bluetooth on and it also shut down, I don't know how to activate it, please I need your help, as soon as possible.
Thanks for posting your query in Microsoft Community.
I suggest to check the Autoconfiguration WLAN service and set it toAutomatic and check if the problem persists.
a. click the Start button.
b. type services.msc in the search box and press on enter.
c. Locate the autoconfiguration WLAN Service and check if it set to Automatic & not automatic delayed.
If you are still facing the same problem, then turn on tracing for a local wireless network when you start a Windows Vista-based computer.
To enable tracing for a WLAN in Windows 7, follow these steps:
a. click on start to reduce this includes this image and then type cmd in the box start the search .
b. right click on cmd in the programs list and then click run as administrator.
The collapse of this includes this imagIf you are prompted to confirm that you want to continue, click continue.
c. type the following line at the command prompt and press ENTER:
netsh wlan set tra persistent
The monitoring starts immediately and is persistent. When you restart the computer, the tracking begins shortly after the start of the WLAN auto configuration service. Existing monitoring log files are overwritten.
Note: To stop the follow-up after you activate it, use the following command:
Netsh wlan set tra no
For more information, please see: How to enable tracing for a LAN wireless in Windows (for Windows 7)
Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.
Why is this?
I just got my Toshiba Satellite A205-S5843 today and I would like to get on the internet at my cousins House but they have wireless and is not letting me do.
I DON'T KNOW MUCH ABOUT COMPUTERS.
Why is my wireless adapter is disabled and how can I fix this problem?
I have a laptop Toshiba A205-S5843.
ANY HELP IS APPRECIATED!
The wireless network card can be activated very easily!
The WLan switch on the front panel should be lit. If the switch is turned on the led WLan should be on.
In addition, he must use the FN + F8 key combination to turn on the wireless network.
Then start configuring WLan using the right SSID and the encryption on the right key.
That s all ;)
How can I activate the wireless, ive tried pressing fn and f8 together but still used to turn
I just downloaded emanual of your laptop and found which is equipped with the Wlan switch. Have you activated? Please, check.
I have the Porteg R400.
The TPM is asking me to activate it TPM chip by setting the bios, but the bios setting there is not the activation setting.
This means that it is not the TPM chip installed?
AFAIK the Portégé R400 supports the TPM chip, but it must first be activated.
The special BIOS upgrade is required to activate this option.
But it's a little tricky to my knowledge only the Toshiba certified maintainer can do that.
So I would recommended contacting the service guy and ask a technician for more details!
Do you know how to contact the ASP?
On the Toshiba page you will find a list with ASP available worldwide.
Check it ;)
I have a Toshiba Satellite 3000 514 and a WLan Mini - PCI Intel Centrino card. (Provided? Â? ? Â® PRO/Wireless 2200BG) running win - XP and Ubuntu.
Is there a solution to work around the problem, the wlan software wants to push me a hardware button to turn on wireless lan, that my laptop is enough?
In a German forum, that someone talked to solve the problem by using the 'easy', a program I already downloaded from Toshiba.
But you can only choose the .exe files to be connected to a button. Is there a .exe file to make the software think that I pushed that no wlan-hardwarebutton existion?
* sigh * Help!
Thanks in advance. Sorry for my bad English.
delicate sounds. I have no software solution for you, but I have another solution for you.
Since you're a German guy, you can check/read this:
It s a card atheros as I have in my Tecra 9100. So, I had a lot of problems with the card intel since they require a full work centrino
platform to work and so most of these cards are 'material' switch (in your case a button) to work.
With the card atheros Don t you have these problems with switch/button since they work at all times without the need for switches or buttons.
The downside is that you can't turn off the map for energy saving purposes.
So I hope that I could help you. Would appreciate some comments. :)
I recently acquired this laptop and I installed win7 64-bit teacher. The first problem was that the wireless card has not been installed, but I go to the Toshiba website and download the new one, next to this i can not activate the map with the fn + f8 key, it's the only way to activate the card.
I already downloaded some drivers and utilities and I can not activate the card, the shortcut key does not work and there is not another switch, software does not work either
Any help will be welcome
Hmm. Win 7 drivers are not yet out, but I found some beta readers on the Toshiba page we:
Maybe you will find some Win 7 drivers for series L500/505
Otherwise I would recommend you to check if you can activate the WLan in Device Manager-> properties-> Advanced tab Wlan card
There are a few additional options, that maybe the WiFi we / off would be there also.
Hi, new here.
I have trouble getting the Toshiba Wireless LAN Mini PCI Card to work.
I installed all the latest drivers on the Toshiba site.
It is activated in windows and the switch on the front of the laptop is on. 6 led is off.
The FN + F8/Wireless icon button does nothing.
Windows repeat me any available wireless network.
When I try and turn on the wireless card switch network device software Toshiba it just says, 'wireless communication is disabled. Please activate the wireless communication switch. »
The switch on the front would be tired?
Any help would be greatly appreciated.
I guess the 6 LED's LED wireless card.
This LED should shine when you activate the WLan switch on the side of the laptop.
Looks like you have not activated the WLan switch.
I put t know exactly where the WLan switch, but you should check the front of the laptop near the headphone jack.
Check it out.
Then the LED should shine and you must activate the antenna with the FN + F8 key combination.
If I press keys FN + F8 message told me, it is must to activate the WLAN because it s disabled? This laptop has no extra button for the WLAN network, only on the row of buttons under the screen!
I have re-installed all new drivers broadcom WLAN, FN - keys, added block of.
Sorry for my bad English, I am of the Germany :)
Did you already check if the wireless adapter is listed in the Device Manager?
What about other FN keys? If you press the FN key you can see Flash cards on the top of the screen? There should be an option to set wireless on.
By the way: the WLAN driver update is available here: http://aps2.toshiba-tro.de/wlan/
Hi, all of a sudden my laptop says "you are not connected to a network" and I have to activate the Betacam wireless! I have no idea how to proceed. I tried the fn with F12, but this does not solve the problem.
Any help on this would be appreciated you.
> all of a sudden my laptop says "you are not connected to a network.
And when connectivity did you use on this time? WLAN or LAN?
Anyway, according to specification of laptop that it comes preinstalled with Win7 and using FN + F12, you should be able to toggle the local network card device.
When you press the FN key you find cards flash at the top of the screen?
I don't know how to activate my Satellite L30 (PSL33A-00800F) to work on a WI - FI connection. Windows XP - Home page.
On the basis of the computer, he said, 'Wireless LAN withoutW/L'
Toshiba tell me that it is able to receive a WI - FI connection but not set up to do.
Toshiba tell me to download one of the two pilots of a European site Toshiba or use a dongle.
I can't find the drivers for this system on Toshiba Europe sites.
Anyone know what to do?
What L30 you exactly (L30 - xxx)?
PSL33A is probably not European cell phone model and I can not find on European support page to see what WLAN card is inside.
Anyway, WLAN drivers you can download from Toshiba WLAN Portal under http://aps2.toshiba-tro.de/wlan/
Maybe you are looking for
I use regularly clean printing to save paper and ink. Now, Mozilla has taken upon itself to say that I can't use it? Did I say in this case or this big brother takes over my life?
I ran a diagnostic test in Itunes after my CD I put in the drive was able to start, can you help me fix it? The player that has been detected is e: HL-DT-DVD + RW GSA H31N SCSI
HelloI would like to know if I can create another user on the ebs r12 database.That's another application (not ebs).What are the risks?Is there an id doc on this subject?Thank you.
Hi guys,.Can someone help me to explain what happened with the audio channels in the new update? Stereo channels existed only on one channel (for example. A1, with Left and Right on the same channel). Stereo audio is now represented by two channels