Portege 4000 - Installed W2K - wireless connection problem

Similar Questions

• Pavillion G6 2014tx: wireless connectivity problems

  Since the last 2-3 months, my wireless connection does not work correctly. This happened right after that I did the partitioning in the D drive (I don't think this is the main cause). What is happening is that, all of a sudden when internet does not bar shows signs of yellow warning and 'tells' LIMITED ACCESS wireless network. When I try to solve problems, it will give no problem. Then in Device Manager, I tried to uninstall and install again, the internet worked for a while, and still the same problem occurs. When I tried to call to the service center, they told me that I have to buy CDs to retrieve a value of rs500 because I did not these recovery disks. I'm in serious trouble please help...

  I also tried to update latest driver frm net, even if the problem does not get resolved. I also tried to reset the TCPIP in cmd prompt, but it worked for 2-3 days and still the same problem happened...

  Hi there @Parthsagar2010

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you are having problems with your wireless connection, and I am happy to help you with this.

  I realize that you mentioned the update of your driver from the internet, but just in case, here is the page drivers. There are several pilots possible depending on what card you have.

  HP Pavilion g6-2014tx Notebook PC - software & drivers

  The following pages are useful for troubleshooting wireless connectivity problems.
  Troubleshooting your wireless network and Internet access (Windows 7)

  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Forget the network: (Windows 7)
  1. press start.
  2. tap manage wireless networks, click on the application at the top of the start menu.
  3. right click on the network, and then click on remove network.
  4 confirm the warning by clicking OK.

  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Test an ethernet connection:
  Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

• Satellite L10: I want to install a wireless connection - how?

  I have a satellite L10... and I want to install a wireless connection on the help on the config free pages it is said that the alternative "quick connect" appears after the installation of the projector toshiba wireless... it is what? and is anyone knows how I can do this without getting more confused?

  Hello

  It's Toshiba projector Wireless:
  http://www.ProjectorCentral.com/Wi-fi_toshiba_tlp-T501.htm
  As you can see it's not a fast connection wireless card or something like that.

  First of all, it would be very interesting to know the name of your unit, because I know if your laptop has a wireless card or if it of possible to update the device with the Mini-PCI Wireless card.

  If your laptop has a wireless card so you need activate the wireless antenna. The switch on the side of the unit, you should find. In addition, choose the wifi with the FN + F8 key combination.
  Well, now you have an AccesPoint in your neighborhood. If there isn't one available then you should see it. Go to network connections. Here, you must select the list of wireless network in network and refresh.

  But if you have a wireless card so you need to upgrade your laptop with the minPCI card, or the wireless USB stick or a PCMCIA wireless card

  Best regards

• Satellite Pro 4340: Wireless connection problem

  I can't connect my sons Satellite pro 4340 using a belkin preN wireless card Belkin router to take are there problems that I need to know or anyone could do that?

  Hello

  Well, if you want t use WiFi, you must pay attention to the different settings and options.
  First of all, are you sure that you have installed the wireless network card correctly and it appears in Device Manager 100%?
  Please check!

  After the properly installing the LAN on laptop computer card, you must configure the WLan router.
  For most installation instructions delivered with the package and you will need to follow these guidelines!

  For the first time, I would not recommend to set of ciphers.
  You must first test the connection without encryption, and if it works then you can allow it.

• Satellite P300D - wireless connection problems

  Good evening.

  Sorry for my bad English.

  Here's my problem: whenever I try to install my wireless modem, my computer shuts down, the blue screen before connecting off the coast with many words that I did not have time to read.

  The modem is certainly not a problem, as I tried it on another PC and it works perfectly fine.
  Can you help me?

  Hello

  If I understand correctly your problem; the BSOD (blue screen of death) appears during the installation of the software for the external Wlan modem immediately.
  Right?

  I assume you are using portable satellite P300D Win 7 on your computer.
  There may be a compatibility problem with Win 7 OS?

  > The modem is certainly not a problem, as I tried it on another PC and it works perfectly fine.
  Have you tested the modem with the other Win 7 computer?

  The other hand the Mobile supports an internal Wlan card.
  Have you tried an update of the Wlan card driver?
  To do this
  Here you will find the latest drivers:
  http://APS2.toshiba-tro.de/WLAN/

• g505s 8.1 updates & wireless connection problem

  I just downloaded updates Microsoft last night and as soon as I restarted, my wireless connection was gone/missing/non-functional. I have read some other posts that made me think that the issue may be with the (Qualcomm Atheros AR956x) wireless network adapter driver, but the download or install the latest driver from Lenovo (wlan149w81) support site didn't do me good. I do not see again for a Wi - Fi connection in the center of network & sharing.

  Someone at - he never saw something like this before / know what might be causing the problem?

  Hi solid Cruver - thanks for the help. Looks like that the combo of what I did and what you recommended has done. Update the driver LAN first and second WLAN driver seems to have solved the problem. Thanks again.

• HP Pavilion dv7: Wireless connection problems

  My laptop says it's connected wireless, with the signal strength excellent, however when I click on search via IE or Chrome, it indicates that it is not connected to the internet. On the network and sharing Center, this also indicates that it is not connected and said that the network is unidentified but then it shows an intense tone.

  When I connect the cable to the router, I can search on the internet.

  My mobile phone and computer laptop boyfreind both work on the wireless connection.

  My laptop not connected wireless to the House of my parents either, but he has previously worked at my old apartment.

  I tried the advice provided on the Web site of the reset in the cmd window.

  All ideas that could recommend would be appreciated.

  Hello:

  Has your PC what model wireless network adapter?

  If she has an Atheros wireless card, see if installing this driver solves this problem.

  FTP://ftp.HP.com/pub/SoftPaq/sp54501-55000/sp54972.exe

• Access only "Local". Wireless connection problem.

  I have a Compaq Presario CQ60-211DX running MS Vista. Yes I know. in any case, I am able to connect to any available WIFI, except my personal home WIFI. If it is directly connected to the ethernet cable, I'll have internet, but once I disconnect it-i lose. My wireless says "Local" only signal I've tried everything. To restart all electronic devices which means my internet to read on the fourms a lot, a lot. I used the Norton removal tool, I did the regedit, MS Vista update, checked for drivers updated and nothing else I can read up. SO PLEASE! Help!.

  Hi RedskinsBnG,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         He has already worked?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: Follow the steps in the article.

  Solve problems, find wireless networks

  Windows wireless and wired network connection problems

  Reference: wireless networking: frequently asked questions

• WRT54G2 v1 wireless connection problem

  I installed the router yesterday and after two tests, but I have the internet connection.  I couldn't go wireless then or today.  I tried many times today, and my status says all OK.  I removed the ethernet cable from my PC because he said everything's fine, then lost internet connection!

  When I try to fix wireless according to the Advisor, he said no adapter found wireless!  I have a jack, which is wired for a buzzing doorbell system and wonder if this is the problem.  (I had problems with my magicJack when I moved here and just got a landline phone because of problems with this Jack two weeks ago!)   Could there be problems of incompatibility between the wiring in the plug and the router?  With the exception of the wireless connection everything works fine!  Help, please!

  Thank you!

  I think that your computer has installed wireless network card.

  Contact the vendor of your computer and see if you have a wireless network card installed properly on your computer. If the wireless card is not installed on your computer, you will need to get a wireless adapter.

• wireless connection problems vista adapter usb wireless 802.11 b/g #2

  my HP pc used to connect to my internal wireless, no problem. I know the wep key and had several hours of navigation...
  I move for a year, come back. apparently my PC doesn't connect now... in fact, it won't even connect with a CABLE!
  He repeats to me ' identify with. "
  Well, Vista has been updated since and I've been usng a mobile dongle (at GREAT expense!) to try to update, but now I'm sick of the cost and I need internet access appropriate again!

  Thank you for responding Srinivas
  I don't know the model but it is a HP, three or four years now.
  I had all sorts of messages of "not able to connect" and limmited conectiviy... I'm sure I had a relative at all simply have no connection
  the browser, I would have used that I had connected would be Firefox, but it has yet to get to the point that I was getting nothing. bytes sent might be higher than anything but received nill.
  at the time, I was unable to get ANY connection NET... for all intensive purposes, I've been totally disconnected

  I had tried everything that arises, each suggestion had windows, but it made no difference... even a connection WIRED sitting to 'authenticate '.

  Odly enough, who are seeking to solve a problem with my scandisk is not not be able to access C drive I have run "services.msc".
  looking through everything that might stop the player access, I found that the DHCP Client does not work... I made sure it runs automatically and (because I checked my settings of a few hundred times) the network came as a light!

  I don't know what turned it off because none of the programs I run affected before (I haven't installed any new programs since then be disconnected from the network)

  Thanks for the reply. I hope this information helps in similar cases in the future :)

• Wireless connection problem - "could not contact the primary DNS server.

  Hello. As of today, I had an interesting problem with my connection wireless home.

  I have DSL, and my router (an Actiontec GT704-WG, for reference), periodically decides to abandon the internet connection throughout the entire family. This includes our parent unit, as well as my lap top which relies on a wireless connection.

  Today, I noticed that my laptop was switched to 'Access Local.' only I went to check my modem, only to find all the lights on the side were, and the computer was working fine. I tried to reset the wireless connection, activating / disabling the wireless and switch off, Plug and reconnect to the network without wire, as well as re-booting my computer. None of these things worked.

  I also received and error message that tells me it: "could not contact the primary DNS (fe80::341b:6831:1247:6707 11%).

  I don't know what this means, although I checked to make sure that my ISP address connects well, and as far as I can tell it is. I also checked everything that Microsoft suggested troubleshooting guides, nothing helps.

  I don't know if that makes a difference, but I noticed to my lap top more close to the router, the connection would come periodically power on and off. Also, these problems started occurring after that I installed and then uninstalled Firefox. I use Internet Explorer, but I wanted to try Firefox.

  Also, my computer is an application of Toshiba Satellite L305-S5944, running Vista Home Basic, I believe.

  I hope I've provided enough information.

  Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• DeskJet 3050 J610a - unexpected wireless connection problem.

  Running:

  10.7.4 MacOSX

  HP software: HP_Lion_Ink_SW_v12.13.17

  Printers: Deskjet 3050 J610a worked perfectly via a wireless connection

  MacBook5, 1 Intel Core 2 Duo, while I had been with HP Software HP_Installer_DJF4100_v9.7.1, which has been * no * intended for this printer, but I was able to "ADD" the printer Deskjet 3050 through preferences system, through the HP Socket,

  [Recklessly] looking for a more "functional" configuration, I looked at HP support and found that a specific software was released for computers running "Lion".

  So I uninstalled the previous DJF4100 software, restarted the computer and installed the new software and drivers for Lion as described above.

  Now the printer Deskjet 3050 J610a appears in the network of the computer under "devices" as

  "HPJ610a.047DED", Type: computer network computer. It is also detected with.

  ' Security: no ', while my Wi - Fi throughout the House network is encrypted with WPA/WPA2 Personal.

  I could of course decline on the previous software and configuration, but before that I would like to understand why this new software, which was released by HP for Mac computers running Lion behaves in such a way, why does the printer as a standalone device (which she has never done it before).

  As I said, before I regress to the previous configuration, using a software program that initially is not required by the printer or by the operating system, I greet all the information and suggestions.

  I need the wireless connection!

  Thanks in advance.

  Okay, well, I think that a different router can only solve this problem dead.  Consider an Apple Airport Terminal.

  If you connect your Mac on the network 'JPJ610a.047DED', this is a direct link between your Mac and printer wireless (not involving only the D-link).  So, naturally, you shouldn't be able to get on the Internet with this arrangement.a

  When you run the HP software (Finder - go to Applications-> HP-> -> printer software installation &) it will allow you to connect your printer directly to your network with the temporary use of a USB cable.  He who does not?

• ThinkPad Edge E15 302 - 45U wireless connection problem

  I had to do a fresh install of windows 7 Professional.  Everything works apart from the wireless connection.  I downloaded every driver wireless and the problem still persists.  I can see the connection being broadcast, by entering the password to connect, I get only "windows could not connect to xxx".

  I can connect to this point my phone wireless and my other laptop is no one else in the office having this problem.  I'm having the problem only on this Thinkpad.

  If I try to use Intel PROSet/Wireless diagnostics tools I get a FAILURE-Wireless equipment is not related to the transport driver.  I tried all that at this point with no luck.  LAN works of course but I need the wireless to work.

  Thank you

  Nevermind I managed to solve the problem by creating another profile.  Log on to the new wireless profile works great.

• Windows 7 wireless connection problem

  I just bought a brand new Alienware m17x and all drivers are up to date... .IM with broadcom wireless network adapter. The strange thing is that last night I was on the internet for several hours without any problem using the wireless, but this morning iwas unable to use my wireless internet access. This has happened several times now. Sometimes it says "not connected - no available connections" and sometimes he says "not connected connections are available" when she says, links, I try to connect to the network, but it says "unable to connect to the network. The only time wherever I was able to connect to wireless internet, was when my computer is automatically connected to my wireless network without me having to select the network and attempt to connect. I read things about windows 7, with a mode of "sleeper" for wireless connections or something, and that can be the cause of it and that it is better to turn off or downgrade to xp. I am really frustrated because I am not able to connect wirelessly and I hope you guys can help me find a solution.

   

  Guide to correctly troubleshoot wireless M17x
  with Dell Wireless 1510/Broadcom card
  by Glzmo

  Since many new Alienware M17x all powerful users, especially those who use Windows 7 as operating system there are various problems with their Wi - Fi connection and post threads asking how their difficulty over and over again, I decided to write this guide to show them how to solve these issues properly Commons. The solutions in this guide were created and designed for 64-bit Windows 7, but they may also work in Windows Vista, although these problems were experienced by users of Windows 7 mainly in the past. It could very well be that the problems start occurring in Vista as well with the new drivers and Windows updates.

  I. may not connect to the wireless network and or see the wireless adapter when the Ethernet cable is disconnected
  If you sometimes or always unable to connect to the wireless network, cannot connect to the wireless network when the Ethernet cable is disconnected, unable to connect to a wireless network unless you restart once to get this work and other weird problems to be unable to connect to a wireless network continue with section II. Otherwise, continue with section II..

  Sleep of a.i. Disable on disconnect device
  Some new Nvidia Ethernet drivers have a function called sleep device to disconnect. This is the culprit. Normally, it should only put the card Ethernet to sleep when the cable is disconnected, but it is buggy and thus kill the wireless connection as well.
  Follow these steps to disable this feature on your Ethernet Nvidia card:
  1. open the Device Manager of Windows by pressing Win + break, and then click on Device Manager on the left side.
  2 double-click network adapters.
  3 double click on NVIDIA nForce Networking Controller (Yes, that's indeed wired Ethernet adapter).
  4 click on the Advanced tab.
  5 select sleep on disconnect device.
  6 set the value to disabled.
  7 click OK and wireless should work again (may require a reboot later, but probably not).

  I.b. install different drivers (older) who do not have the device sleeping on disconnect feature.
  The above does not work or if you are not comfortable with these drivers, follow these steps (if step A.i. was successful, you will not need to follow these steps). Take care to create a system restore point before proceeding:
  1. click the Windows Start button in the taskbar.
  2 click on Control Panel.
  3 click on uninstall a program.
  4 in the list, double-click Nvidia drivers.
  5. Mark Remove only the following.
  6 in the box below, only check the Nvidia Network driver.
  7 click Remove and follow the uninstall instructions.
  8 restart the system, if you are prompted to.
  9 download another (older) driver from Nvidia.
  10 install the old driver.
  11 when asked what drivers you want to install, select only the network driver.
  12 follow the installation instructions and restart your system if prompted.

  II. Low or fluctuating wireless connection speeds
  If you have problems with WiFi low connection speeds (such as rates decline over time, the speeds are much lower than they should be, network lag/stutter in online games, loss of light packets, loss of internet connection as LAN works and other weird things) or speeds of fluctuating wildly without apparent reason wireless connection install the version of the Dell Wireless 5.60.18.8 drivers instead of the standard Broadcom drivers. All older drivers will usually cause the speed of connection under normal. Note, however, that you may need to install the driver manually via Device Manager as the pilot was not released for another laptop and is not officially available to the M17x yet - that's why the installer won't work. Take care to create a system restore point before proceeding.
  Here is a step by step how manually install the driver:
  1. download the drivers Dell Wireless 5.60.18.8.
  2 check out the R29128.exe file using an extraction utility like WinRAR or just run it and quit the installation program.
  3. open the Device Manager of Windows by pressing Win + break, and then click on Device Manager on the left side.
  4 double-click network adapters.
  5 double-click the Broadcom 802.11n network adapter entry.
  6 click on the driver tab.
  7 click the button Update driver .
  8 click Browse my computer for driver software.
  9 click on Let me take form a list of drivers for devices on my computer.
  10 click the disk provided .
  11 click Browse.
  12. select the folder that you extracted the drivers you just downloaded in step 1. in.
  13 select the subfolder DRIVER_US (if you are in the United States), DRIVER_JP (if you are in the Japan) or DRIVER_ROW (if you are in the rest of the world), according to the region you are in.
  14 click on the Open button.
  15 click OK.
  16 select the driver that says Dell Wireless 1510 Wireless-N WLAN Mini-Card of the list (you may have to scroll down to see - it presents itself as second to the last in the list for me).
  17 click on the Next button.
  18 you will get a warning that the driver that you are about to install is not compatible with your hardware. Ignore the warning and proceed with the driver installation.
  19 restart your system if prompted to do so.
  20 your new driver should now be properly installed and the speed of your wireless connection in the order.

  III. If all else fails (or you've just had enough of boredom arising from the Dell Wireless 1510/Broadcom card)
  Replace the Dell Wireless 1510 problem with a card half-mini Intel Ultimate N WiFi Link 5300 A/G/N (use the bluetooth as the third antenna antenna or buy you an additional antenna for this). It works very well with the M17x, has better connection speeds to strips of the 2.4 GHz and 5 GHz (this last has speeds really bad on the Broadcom/1510), it has not required to jump through the hoops to make it work properly and much more, it works with standard drivers and Intel maintains their drivers up to date. It is also much more reliable and faster as well, especially on the 5 GHz band, but also on the 2.4 GHz band.

  For more information on the subject of tweaking the settings of your Dell Wireless card, check out the official setting advanced properties: Dell Wireless WLAN Card User Guide.

  I hope that this guide will help you solve your Wi - Fi connection and allow you to enjoy speeds of complete wireless connection on your laptop Alienware M17x.

  Addendum: Quick links in this Guide

  Driver wireless Dell 5.60.18.8 version
  Download the driver for the Mini PCI Dell Wireless 1510 card used in this guide.

  Broadcom 943xx Wireless Driver version 5.60.18.41
  Download the latest Broadcom driver as an alternative to the Dell a little older driver who may or may not solve the problems more. Some have seen more success than with the 5.60.18.8 drivers with it (you need to use the 802.11n network adapter driver rather than at the entrance to Dell Wireless 1510 Wireless-N WLAN Mini Card in step II.15. the guide when you use this driver).

  Setting advanced properties: Dell Wireless WLAN card User Guide
  Reference Dell official Manual/Guide on the various properties Advanced Dell Wireless cards.

  Card Intel Ultimate N WiFi Link 5300 A/G/N Half-Mini
  Link to buy the demi-mini card Intel Ultimate N WiFi Link 5300 A/G/N of dell.com upgrade the crappy Wireless Dell 1510/Broadcom card that comes with the M17x.

  This Guide is a work in progress. I will update as I hear it.

  Feel free to link it in different threads to disseminate information.

• U940 PSU6VA satellite - wireless connectivity problems

  _ * My specifications: * _
  * Model: * Toshiba Ultrabook (Satellite PSU6VA - 00S 002 U940)
  * Operating system: * Windows 8.1 x 64 (upgrade of Windows 8 x 64)
  * Wireless adapter: * Intel Centrino Wireless - N 2200
  * Wireless adapter driver version: * 15.10.0.12 (which is the last for my device)

  I got this Ultrabook since February 2013, and throughout this period, I always had problems with wireless connectivity, even after a factory reset. My wireless icon varies between three States:
  * Internet access
  * Limited (in which case I can't connect to the internet or any other device on the network)
  * Not connected - connections are available (and if I try to connect to the network, it will fail)

  Sometimes my computer would instantly reach the State of "Internet access" at startup and remain in this State. Other times, it would be 'limited' for several minutes after the start of my computer before it finally connected, and even in this case, the connection will drop out every now and then. In the worst case, it would indefinitely remain "Limited" or "not connected", regardless of how many times I reset my adapter wireless or rebooted my computer.

  Until very recently, I always thought that these problems have occurred randomly. However, I noticed recently that I have always a connection perfect, whenever there is no other computers connected wirelessly to my router, and I always have problems more or less when there is at least another computer (or even a smart phone) connected wireless to the router. If there is another computer connected to the router via an Ethernet cable, this causes no problems. It's only wireless connections that interfere with my computer.

  It is only this computer that has these problems; the other computers in my house ever experience these issues, no matter how many computers is online. In addition, my computer is not only these problems with my home router; It has the same problems on the network wireless at my University.

  My question is, how do I fix? Is this a known bug or is my defective wireless adapter? I know that I can connect using an Ethernet cable if possible (I have never problems with Ethernet connections), but this is not always possible at the University.

  Did you remove the old driver Win 8 Intel of the system before you upgrade to version 8.1 to win?
  The old Wlan Intel driver could affect the performance of a Wi - Fi connection.

  The driver update page Win 8.1 says clearly that Intel Wlan driver must be uninstalled and the
  Inbox Windows 8.1 version must be used.
  http://support.Toshiba-tie.co.jp/windows81/drivers/PSU6V_Up_au.htm