Portege 4000: Where to insert the memory modules live

Similar Questions

• Portege M780 - how to upgrade the memory?

  I have a M780. I wanted to move to 8 GB. But if I open the memory module, I can find a slot for the memory. How can I access the other get 2 x 4 GB?

  As they seem to be similar to the M750, maybe it's the same thing with the M750 and someone can answer this question. Unable to find a service manual for the M750 / M780 either.

  THX

  Marcus

  Hi schuerstedt,

  Really, you ask where the other memory module location?
  The user manual is not interesting for you right?

  Well, if you check the user manual, you can find an exact description how replace the memory sticks with lots of photos.
  Check this box!

  BTW, the other location is placed under the keyboard.

• Satellite M70 - how to remove the memory module

  Can someone post instructions on how to remove / add modules of memory for Satellite M70?
  Thank you
  FS

  Hello

  It of not difficult to remove or Exchange the memory modules because you only check Chapter 8 and 9 of your owner's manual. In the user manual, you can find a detailed explanation how to do this with a few photos and what you need to the modules of RAM.

  Check this box!

• Tecra R10 - how to remove the memory module?

  Hello!

  How to remove the memory module?

  Get the following message and for me, it means that one of the modules is broken:

  Out of memory error
  Address = H 00034000
  Read Date = H 28034000
  Write data = H 00034000

  For my opinion, the computer should start up again when I remove the memory broken slice?

  The Australia has soon

  Hello

  You can easily remove the memory modules.
  I think that the Bay is placed at the bottom of the unit.
  Remove the screw that is blocking the Bay, and you will have access to the module.

  Here is a video of how do this on another Satellite L500 laptop. But the procedure is not very different on Tecra R10
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=81

  I hope this helps a little

• Portege 3440CT: what is an original memory module specification

  Help, please.
  Someone at - it a * photograph or physical description * on the original 128 Meg module that went in the the 3440CT.

  I know the part number and specification that I'm specifically trying to identify if my 3440CT is part of Toshiba and guarantee in respect of the year 10. Its defective.

  Paper label printed with: -.

  * square '3d' barcode
  * 128 MB PC-133
  * MTGA83S-86KI3
  * EAE
  * S / N:S36000801096
  * VOID WARRANTY IF TORN OFF

  The chips are of KTI
  TSV864T4I1A

  It has 4 chips on each side and a Micro Dimm 144 pin.
  Printed on board is T3-0196 REV:1.0

  I hope this link works. It's one on Ebay in Poland
  http://I8.ebayimg.com/01/i/000/D1/AE/cd1e_1.jpg

  Thank you
  Neill

  Post edited by: neill.bird

  Hello

  Portege 3440 supports 64 MB internal memory and this memory cannot be deleted.
  As a location is available.

  As far as I know Toshiba recommends to use these modules for an upgrade:

  * SDRAM 64 MB (PA3033U - 1 M 06). *
  * SDRAM 128 MB (PA3034U - 1 M 12) *.

  I think you could google for these simple figures and you should get a photo or any need for details on these modules

  Good bye

• Satellite M70 - where to get the memory expansion

  Hi all

  It's my first time here and I was hoping someone could help me please.

  My brother has a Satellite M70 which currently has 1 GB of memory and that he was willing to expand this to 2 GB.
  Does anyone know where we can get parts to do this in Australia, site Web from Toshiba in Aus is not direct sales or online?

  The technical info I have, it seems that an expansion of 1 GB card is KTT533D2/1GI part number, it seems okay for those of you who may know?

  Don't really know much about it so hope I don't sound completely stupid!

  Thank you
  June

  Hello

  Have a look here:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=19229&ft=m&St=3

  You will find compatible memory modules for Sat M70.

  According to this page, you can use DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM.
  Usually (but not always) it s any manufacturer is.
  Very important are the specifications of the module

  I recommend that you are looking for a DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM and I m you will find some good deals online.

• Portege 4000 - how to install the display driver for XP?

  Hi-

  I did a clean install of XP Portege 4000. The system has been previously default 98SE.

  Noticed that there is a yellow exclamation point in other devices about the video controller (VGA compatible). I downloaded the display on the Toshiba site driver (if it is the right thing?), but can't seem to install. There is no setup.exe to help me.

  My XP screen covers only 3/4 or more of the screen total, so that something is wrong somewhere...

  Hello

  No, Toshiba don't support Linux or Ubuntu on the Portege 4000 and you can t find drivers for it on the Toshiba page. Only Windows drivers are available.

  I m not an expert in Linux, but as far as I know you don t need additional graphic driver for Ubuntu. You should only change the resolution of the screen or something in the settings of the screen. I had the same problem on the first time I used Linux and I could solve it without additional driver but I put t know how I did it :(

  Good bye

• Question about the use of the memory modules

  I have a dilemma between the use of a new 1 GB memory (what I intend to buy) with more speed
  and by using the 1 GB + my old 256 with less speed
  which option will contribute more?

  Hello

  The fact is that if you use 2 different memory modules with different properties (of lower performance) so the laptop can run with lower performance. This means that the 256 memory module slows down you memory. The best way is to use the same modules having the same properties.

• Satellite L50 - B - 1 HM - how to replace the memory module?

  Hello

  I have a Toshiba Satellite L50 B - 1 HM, product number: PSKTAE 072017CE. It has 8 GB of RAM but is expandable to 16 GB.

  My question is, should I buy a 8 GB memory module? (and I would add up to 16 GB).
  Or should I buy a 16 GB memory module to completely replace the memory of 8 GB?

  Memory 8 GB Toshba module I've found is the following: P000577360

  Thanks in advance

  Kind regards

  Hello

  Googling around, I found also specification for your model of laptop and if I understand it is just your machine can be upgraded up to 16 GB for you can use 2x8GB.

  Compatible 8 GB of RAM for your machine has PA5104U-1M8G part number.

  I n t have this model of laptop, so I put t know if there is coverage of RAM placed on the lower side of your laptop. If this isn't the case, RAM could be placed under the keyboard so RAM upgrade must be performed by the Toshiba service provider. Removal of material or to open the case of the laptop on your own is the warranty.

  Be careful about this.

• images dialog box is empty when you insert the memory card

  This is after you have inserted a card high capacity in the player, which hung the memory slot.  Now just insert a regular memory card, the dialog box appears, but there is nothing in it.

  Sorry if the info seems confused but maybe the
  answer is here somewhere.

  FWIW... There used a similar problem with a Sony memory
  Stick... the solution is to insert the stick into the drive and
  Restart the computer... somehow this would reset the
  stick.  I don't know if it will work for you.

  You may also check your AutoPlay settings...
  If you insert the card and go to... Start / my computer...
  and right-click on the drive letter for the location of in the map is...
  choose... Properties / AutoPlay tab...

  Choose... Mixed content...
  Tick... Select an action to perform
  On the left, click on the default button / apply / OK.

  Give it a try...

  It is possible that your media player is not compatible
  with the SDHC technology. The best is maybe to buy
  an external drive that is compatible SDHC or download
  Unit photo using a USB cable.

  Regarding the card... have regular SD, you tried to manually
  Download the pictures?

  If you connect the device to your PC via a USB cable, turn
  on the camera... then go to... Start / my computer... it may be
  listed as a drive letter...

  If_yes_right click on the drive letter and select... Explorer or
  Open... This should display the directory of the memory card.
  You can copy and paste or drag and drop the files from there to a
  folder on your hard drive.

  (The same steps work if you have a media player...
  When you go to... Start / computer... the media slots
  Drive should be listed under... "Removable disk" with a drive
  letter.)

  Finally... the AutoPlay Repair Wizard can be worth a try:

  Microsoft Autoplay Repair Wizard
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=c680a7b6-e8fa-45C4-A171-1b389cfacdad

• Where to insert the & quot; H1 & quot; Tag?

  Forgive the newbie question...
  
  Where should I insert the HEADLINE1 tags in the next line? (I want to include the 'editable' region and the word 'specials' in the title tag).
  
  Where should I insert the < h1 >?
  
  So where should I insert the < / h1 >?
  
  
  Thank you.
  
  < p align = "center" > < b > < span lang = "" en - us "> < i >"
  < font size = "5" color = "#0000FF" > <!-TemplateBeginEditable name = 'Name'-> <! - TemplateEndEditable - > < / police > < / i > < / span > < i > < font size = "5" color = "#0000FF" > < strong > < u > BEST < /u > bargain! < / strong > < / strong > < / font > < /i > < / b > < / p >
  < / make >

  Yes - two separate h1 tags. Or other tags from level H.
  Why you should not place an editable inside tags like H or P or
  B or others like them. This requires being hassled by an alert box on the
  locked content.

  Maybe you could get away with it in this case, IF you do not ever
  to put the tags within this editable area who do not belong inside a tag H.
  As no points and so on.

  --
  Alan
  Adobe Community Expert, dreamweaver

  http://www.Adobe.com/communities/experts/

• Portege Z930 - how to clear the memory of the fingerprint sensor?

  Hello

  Tell me how to clear the memory of the fingerprint sensor?
  Reinstall the operating system and now I can not add your impressions.

  They have their No....

  > Reinstall the operating system and now I can not add your impressions.
  Stand by. You have reinstalled OS using original recovery image?

• I usually use picasa to upload my images, but for some reason any 'auto play' does not appear when I insert the memory card. Any advice?

  When you use picasa to upload my images I usuall just put the memory card in the Tower, AutoPlay appears and then I can view, download, etc... But now the auto dish doesn't appear so that I can tdoen load one of my images from picasa. Can someone help me with this? Thank you

  Hello

  I suggest you to refer to the following Microsoft article and check if it helps.

  Troubleshoot AutoPlay:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Change AutoPlay settings:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  For more information, see the following Microsoft article.

  AutoPlay: Frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  Hope the information is useful.

• Where to insert the BIOS on Portege Z830 supervisor password?

  + Number description: +.
  I can access BIOS through F2 on my Z830.
  The installation of the system is listed, but cannot be changed.
  The BIOS supervisor password is set, and I know.
  There is no prompt like ' insert password: "."
  * Please help me find the way how to insert it.*

  (I can also run the system configuration utility.

  There is a prompt "Insert password."
  * If I insert my password it works.*
  But in the utility are some parameters (for example Intel Rapid Start) is missing.)

  BIOS version: 1.8
  8.1 Windows 64-bit

  Post edited by: micko

  Hello

  The password of the BIOS and the supervisor password can be removed in the area of security of BIOS.

  Please also check this Toshiba document.
  http://APS2.toshiba-tro.de/KB0/TSB0B032D0000R01.htm

  In some cases, you need to press the "INS" in Toshiba logo appears.
  Then appears a prompt for the password for the supervisor and if the password is certified then the BIOS could be entered by pressing the "F2" key

• Portege 4000 - how to enable the WLan using W2k

  Hello

  I installed the driver for Lucent Wireless LAN (6.41.1.87) for this laptop that has W2K.

  However, I can't control it! I also installed a wireless keyboard shortcut, but there are no instructions on it.

  This laptop was initially W98SE top, and it's a fight to get this working.

  Any ideas?

  Hello

  The FN keys are controlled by common Modules.
  Please install common Modules to obtain the essential work of the FN.
  In addition, you need to install Wireless Hotkey

  In addition, there are two different drivers WLan for Portege W2k. Driver Wlan Cisco and Lucent Technologies Wlan driver.
  Do not forget that you are using the correct driver.