Portege 4000 - Win 98SE want to update

Similar Questions

• I have win 98se, win xp sp3 and Windows vista 64 bit, I want to share printer files

  I have win 98se, win xp sp3 and Windows vista 64-bit PCs, and I want to share files & printer... printer is connect in xp or 98se, well, what is possible... currently, I've got these between vista and xp, which is available when win 98se involved?

  Two ways are participatory computers in a windows environment, a working group and a _.   You can fill in the blank?

  Virtual private networks have little to do with the domains or working groups.

  I don't think that WIndows 98 can join to a domain.  All versions of WIndows, you mention should be able to participate in a working group, however.

  In my opinion, the best way to share a printer is to use a printer connected to the network

• I want to update adobe Acrobat 7.0 standard. Is it possible to use a version of Acrobat Standard DC 2015 UPG WIN (Dutch)?

  I want to update adobe Acrobat 7.0 standard. Is it possible to use a version of Acrobat Standard DC 2015 UPG WIN (Dutch)?

  No, unfortunately, only Acrobat 10 and 11 are still eligible for the upgrade to Acrobat DC.

• Portege 4000 - I would like to upgrade memory: 256 MB to 512 MB

  Hello

  I have a Portege 4000 and want to upgrade the memory: 256 MB to 512 MB.
  It has 98SE and the user always wants to keep this system.

  Does anyone know if there is a known issue with the upgrade to 512 MB I saw a thread in 2005, by someone who had a problem?

  I suppose that the memory SODIMM PC133. I ordered a 512 MB of RAM to aememory last year, but the system would have not even begun. Maybe they had sent me the wrong chip?

  Thank you

  Tim

  Hmm. perhaps that the RAM modules are not 100% compatible
  To my knowledge, it should be possible to upgrade the RAM up. 1 GB (2 x 512 MB)
  You could also upgrade to 512 MB by using one or two 256 MB modules.

  You must use the PC133 144 pin SODIMM modules and I found these modules that are compatible:
  PC133 512 MB (PA3108U - 1 M 51)
  PC133 256 MB (PA3086U - 1 M 25)

  Also on this page:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=5373&ft=m&St=3

  There are a few modules that should work with the Portege 4000

• (How / what is possible) to install Win 98SE on my laptop

  Hello
  I bought a Satellite 5200 903.

  And in my business I have special software for my machines and this software only works with windows 98/98SE.
  So I tried to install the system.

  But when I place my system cd to my laptop, appears first the Installer menu, I am agree pressing on enter, and a black screen appears and stuck.

  I don't know what to do, I've tried everything
  Make new partitions using fdisk (they are FAT32)
  Clean all formatted left etc.
  Nothing helpes.

  I have too many proposals: laptop do not support windows, due to hardware or BIOS does not work with win 98.

  Help, please!

  Hello

  If you want to use the software on XP I only compatible with Win 98SE, you can enable compatibility mode.
  Please consult this document:
  http://support.toshiba-tro.de/KB0/FAQ5B016L0009R01.htm

  Good bye

• Portege 4000 - upgrade RAM & graphic card driver installation

  I'm having some trouble with my Portege 4000 for the moment. I installed XP on a disk, but will no longer have that I have 256 MB of RAM...

  -Have you tried 2 manufacturers but the PC133 512 is not compatible. However, my system has an IBM of PC100 256 chip, which was bought early last year, after much trial and error, and I wonder now if the motherboard will be more suited to the PC100 and PC133 non?

  -Consider the options alternative to XP, 98SE or 2000 because they are lighter operating systems. I can put it on a spare drive (test). Is it possible to set up a partition for recovery CD Rom (which has 98SE) on this subject and have little space left over to install another Linux operating system or its Manager partition crushes everything?

  -J' put another post for .exe drivers related to the display/vga for 98SE and 2000.

  -Just for the record, not all Linux distributions seem to go back on the size of the screen, so it takes some work...

  Thanks much for any help.

  > Tried 2 manufacturers but the 512 PC133 is not compatible. However, my system has an IBM of PC100 256 chip, which was bought early last year, after much trial and error, and I wonder now if the motherboard will be more suited to the PC100 and PC133 non?

  The protégé 4000 is compatible with the PC133 modules! AFAIK, you can upgrade RAM of this notebook 1 GB (1024 MB) and you can use these modules;
  PC133 512 MB (PA3108U - 1 M 51)
  PC133 256 MB (PA3086U - 1 M 25)
  PC133 128 MB (PA3085U - 1 M 12)

  > Considering alternative options to XP, namely 98SE or 2000 because they are lighter operating systems. I can put it on a spare drive (test). Is it possible to set up a partition for recovery CD Rom (which has 98SE) on this subject and have little space left over to install another Linux operating system or its Manager partition crushes everything?
  You can create partitions on the HARD drive using a 3rd party like Partition Magic 8 tool. I use this tool and it's really nice.
  After you create 2 or three partitions on the HARD disk, you could install different OS (operating systems).

• Portege 4000 - how to install the display driver for XP?

  Hi-

  I did a clean install of XP Portege 4000. The system has been previously default 98SE.

  Noticed that there is a yellow exclamation point in other devices about the video controller (VGA compatible). I downloaded the display on the Toshiba site driver (if it is the right thing?), but can't seem to install. There is no setup.exe to help me.

  My XP screen covers only 3/4 or more of the screen total, so that something is wrong somewhere...

  Hello

  No, Toshiba don't support Linux or Ubuntu on the Portege 4000 and you can t find drivers for it on the Toshiba page. Only Windows drivers are available.

  I m not an expert in Linux, but as far as I know you don t need additional graphic driver for Ubuntu. You should only change the resolution of the screen or something in the settings of the screen. I had the same problem on the first time I used Linux and I could solve it without additional driver but I put t know how I did it :(

  Good bye

• Portege 4000: How can I open Notepad?

  Hi Forum,

  I have problems with certain keys on the keyboard and you want to open the Portege 4000 to remove and clean the keyboard. How can I open the laptop?

  Thank you very much
  DocBrown

  Hello

  In my opinion it of not necessary to open Notepad to clean the keys on the keyboard.
  You can carefully removing the key - top "bad key" to and check that there is nothing in the key mechanism.
  But what key fectuosite?
  What is a key mechanism fault?

• Portege 4000: After HARD drive replacing WinXP installation stopped

  Drive HARD original of my old laptop Portege 4000 just crashed. I went to the local computer store and bought a new Samsung 40 GB HDD (no part no MP0402H) what they recommended. First of all, I have problem to him have partitioned and formatted when it is installed in the computer. Only, I managed to have 25% partitioned only 2 GB?

  Then, when I try to install Win XP Home with the boot floppies that the installation will stop when you insert the disc 6. The new HARD drive is recognized properly by the computer?

  Can I somehow get into the BIOS and change the type of HARD drive?

  Hello

  Stand by. AFAIK the unit has just two (1/2 and 2/2) recovery CD and just sold in Switzerland has several recovery disks (three languages).

  Can you please be more specific about this? At the beginning I have will be just understood what you are trying to do.

• Portege 4000: Where to insert the memory modules live

  I wanted to just extend the memory of my Portege 4000, but I didn t find installed RAM.
  I ve opened all the screws, I found (without opening the whole case), but I didn t find the RAM slots.
  Does anyone know where to insert the RAM?
  Thank you very much
  best wishes from the Austria
  Markus

  Hello

  Module of memory is under the keyboard on the right side near the mouse pad. If you only, please be careful and remove the battery before you begin.

• Portege 4000 turns off after 20 minutes

  My Portege 4000 shuts down suddenly after 20 minutes, sometimes it takes our during 30-40 minutes.
  He then walks back for a few hours.

  Here's what I've tried, and it still happens:
  -On the sector, with or without battery
  -With a different (same) AC apator
  -Unplugged battery operated
  -Held at the BIOS screen (incase it was a Windows problem)

  The fan works, although it feels very powerful.
  And the power light flashes an error code (how can I decode it?).

  Although I don't really use it much, I really want my small Portege of junk.
  Any ideas?

  Hello

  This looks like a laptop overheating if the temperature is too high, the portable computer shuts down to prevent the equipment from damage

  But the flashing error code is unusual. To my knowledge along means 0 1 and short
  Then you will get a number like for example this one: 0001 0001 because of the LSB (least significant bit) you will need to read behind 1000 1000 and then convert it to HEXADECIMAL. All that s
  Also check this:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16497&MessageID=60354

  But look buddy, I think you should contact the technical guy should check this laptop fault is a bit strange

• Portege 4000: Unable to connect to the internet

  Hi need help

  has just been given a Portege 4000 of my father for my daughter's brother-in-law.
  The system worked before but hasn t used for about 6 months

  Now, he won t connect to the internet even when.
  I have to try is to say thanks to the Wi - Fi connection or connect directly to the wireless router.

  As I said he was working with a modem speed of tiscali key, I am with tiscali.
  I thought that there would be no problems, but there is

  Help, please

  Thank you

  Hello!

  You use DHCP or a static IP address?
  If you use DHCP, you must turn on your laptop or set a static IP address.

  You have yellow exclamation marks in Device Manager?
  Maybe the driver needs to be updated.

  If you are using a firewall, disable it. Perhaps, it blocks the internet connection.

  Good bye

• I always have an Aspire One D250 series laptop with Win XP. All updated to windows 7?

  This Aspire One still works under Windows XP and I want to update at least to windows 7.  I have a CD with Win 7, but without a CD player on this model, I'm not sure how to update.  Win 10 work on this model?

  You can create a USB bootable for a downloadable iso file from Microsoft Setup disk. However, you will probably be satisfied with performance of slow your system on Win7 or Win10.

  Jack E/NJ

• HP Pavilion 15 laptop: update BIOS - my version of the OS is not listed in the BIOS version, I want to update

  Hello

  I need quick information. I want to update my BIOS. The current version is F.00 - 03/07/2013 and I want to update the F.27 Rev.A - version 25/07/2016. However, Win 10 (which is the operating system I use) is not listed as an operating system supported for this BIOS (latest version for Win Win 8.1 support 64 bit). I would like to know if I can still download and use the version of the 25/07/2016 F.27 Rev.A BIOS even if the latest OS is win 8.1 64 bit, while I use Win 10 64 bit?

  Thank you.

  Dear customer,

  Updated the BIOS for the Chipset and is not serious if the unit has WIN 8 or 10 to WIN.

  As it says BIOS-Basic Input Output System

  The BIOS is a chip on the motherboard.

  We recommend you update the device with the latest available BIOS VER for chipset perform better.

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  GBL84

  I'm not an employee of HP

• "Hi, I want to update to macOSierra.

  Hello

  I want to update to macOSierra

  Quit Siri

  The material only you list your post is an iPhone 6. The iPhone works only iOS. It does not run Mac OS X Sierra.