Portege 660CDT "non system disk error"!

Similar Questions

• non system disk or disk error, windows 98

  I have the chromatograph with P IV system with windows 98. He began to display non-system disk or disk error. Please help and guide me if this hard disk can be used in the version of windows before this error. Because the software of the GC settings that windows and we have no backup. Also tell me if the hard drive partitions can be recovered after formatting and it can be restored to the operating system before the error.

  answer me on this email ID. E-mail address is removed from the privacy *.
  Kind regards

  Zafar Iqbal,

  Faisalabad.

  Support for Windows 98 ended on July 11, 2006.

• Using HP restore - error Non system disk media

  Recently, I received a HP desktop computer that had a bad hard drive. I buy a Seagate 2 TB disk and I also bought the HP recovery media to restore the machine to factory default.

  From the start until the recovery media, I was presented with the option to restore the default settings, walking on the GUI informs me that it is format the drive and reinstall applications, he invites to indicate the disc #2 as expected and ends so ask for a reboot. Date that the system fails to boot with an error message "Non-system disk".

  I started the system with a linux live CD and checked the disk through fdisk to see if it was something simple. I noticed that the first partition is not bootable, and the second partition was. I have enabled the flag of boot on the first partition, without change. I have advanced and reconfigured the drive with fdisk, partition table creation and formatting of the first partition, and then rerun the recovery disks. No change.

  I found a few entries discussing the disks seagate and HP machines, as well as a firmware fix, but I see nothing announces a 2 TB as a problem drive.

  Any help would be appreciated.

  Thanks for your suggestions, but I fear that they have been without result, and I have some additional information for others with similar problems.

  (1) in the disc of recovery there is that something called a Menu "manufacturers", he is now CTRL in the CD is loading, pressing the BACKSPACE key at the right time. This menu has several options, including wiping them out the hard drive and the 'DMI system info' copy of disc 1.

  I followed a few guides to use this menu to try to get my new hard drive, or the spare WD 40 GB working, all without success.

  Thus, this menu has not solved my problem, but to know there lead me to this bit of information.

  (2) HP participates in a process called "Tattoo" the MOBO or HD. This process essentially makes the only function of system with the original equipment, including the hard drive. According to 2 people separated from the HP support, I spoke with, the only way to get this system running and upward would be to buy a hard drive directly from HP. I couldn't find enough documentation on this to be useful anywhere, apart from the realization that it has NOTHING to do with the hardware compatibility and from my point of view, everything about HP, forcing consumers to buy directly from them, thus hindering competition.

  Now for the rest of my rants:

  Booting from a temporary copy of Win 7 allowed me to update the Firmware of the HARD drive, but the Seagate firmware update are listed says "no update firmware of your player"(not exact verbage). "» I was able to get the old HD to boot, unstable but it started and I was able to do a restore system to it and got the update of the BIOS installed, but once when I tried upgrading the firmware on Seagate it said was not an update of my drive. I confirmed the new model number and this is the only one listed.

  Must the drive be formatted for the update of the firmware to take? That doesn't seem like it should be...

  I'll try to copy it to the partition on the new disk of tonight, but honestly, I feel that I lost my money with restoring HP discs, so I'll just go buy a retail copy of Windows 7 upgrade and use it as the operating system.

  Very pleased with this HP product.

• HP Z820 - BIOS 02.55 rev A - SSD on LSI SAS 2308 do not start... "Non-system disk...". »

  Hello

  MY Z820 workstation is equipped with an Intel 520 240 GB SSD as boot drive, on the integrated LSI SAS 2308 controller. It is a GPT disk.

  I just tried to update my BIOS Rev 02.08 Z820. at 02.55 a. rev.

  The update succeeded, and in the BIOS, I check that all the settings are the same as before the update. On the boot, however, I get an error saying "Non system disk or disk error."

  Mass strorage option ROM is set to EFI mode.

  No matter what the settings, it does not start in Windows.

  I started 02.08 BIOS Rev A and now all is well again.

  Is there a compatibility issue with the BIOS 02.55 Rev A combo, Intel SSD 520 and LSI SAS 2308?

  Kind regards

  Dries Vervoort

  LAST UPDATED:

  The Z820 motherboard was faulty. A HP technician swapped the moherboard with a new one and now all is well again!

  The storage controller was indeed defective.

  Dries

• non system disk

  When I boot I get this (non system disk or disk error replace and strike any key when ready)

  All the discs in the CD/DVD drive or maybe a memory card in a slot player?

• "Non-system disk" - Satellite 4100XCDT

  I recently acquired an old Toshiba Satellite 4100XCDDT. When I turn it on, it says:

  "Non-system disk".
  "Replace the disk and then press a button any."

  I know that the HARD drive has been formatted and he lost the operating system on it. I tried to insert the copy of Windows 98se that accompanies it, but nothing happens. I think it's looking for a floppy disk. Everything that goes with it have been the copy of Windows 98se, a charger and the laptop. I have no idea of specs is because I havn't been able to run it again. Can you help me?

  Hello

  Especially this message appears if the laptop can not find a bootable data carrier or the CD-ROM or the HARD drive is not able to start.
  You have a boyfriend of good feelings. If you want to install the Win98, you first of all the accompanying disk. (see the page of the Toshiba driver)

  The accompanying disk contains programs to set up Toshiba computers
  installation information and test equipment. It also contains files and utilities that allow you to get the most out of your Toshiba computer and are capable of detecting your CD-ROM drive on the Toshiba computer during the boot process.

  If you have not already done so, put this disk in the A: floppy drive
  Restart your computer by pressing CTRL-ALT-DELETE. This will activate the Toshiba companion disk utility.

  If you need access to your CD-ROM drive, then remove the word "rem" out the following lines in the Autoexec. BAT and CONFIG. SYS on the accompanying disk.

  REM if exist toscd001 a:\mscdex D:TOSCD001 /M:10 (AUTOEXEC. BAT)
  REM device = a:\toscdrom.sys (CONFIG. (SYS)

  good luck my friend ;)

• Need help: invalid system disk error

  I must have left my laptop on the week last with only a small battery backup as victory, that I woke up in the morning, he had absolutely no power.  When I plugged the laptop and I tried to reboot it wasn't going to the normal microsoft vista home page.

  Instead of this turned back or the system bios and on the top of the screen, he said.  Invalid system disk error.  I pressed ESC and immediately thereafter loaded up normally.  Once on the page of windows, he showed he was about 8 windows updates.  (this every way - when I left my computer on automatic update of windows, running and starting to update my computer.  Since I only had a remaining battery minimum computer must have lost all power during the update.  Because update has not been completely loaded my computer now has a problem starting).

  Whenever I turn on computer, need me the black screen with the comment of the system disk error.  While hitting escape when this screen is easy to do and makes windows vista starts normally - I'd rather have a completely normal vista installation program.

  Help, please.

  What should I do?

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Non-System Disk, press any key

  Hi, what it isi have a ST3500320AS. I was on the web site of Seagate and downloaded this ms-sd1autitity that checks the updates of your player. When he starts an application needs to open, but it does not work. What happens now, the Dell splash screen appears, the next screen said, "Non-System Disk, press any key". Well, I do this and the system boots. How can I get rid of this message disk not system. PS I used this "Download SD1A Firmware Update utility". Thank you

  Hi ejn63, yes my BIOS still sees the 2 hard drives. Hard drive 1 is Vista and Win 7 RC and drive 2 is, Win XP and a data partition. When I go to the messagec to press a key, it starts normally in my boot options, which gives me the ability to start in Win 7, Win Vista or Win XP.

• How to fix error of starting non-system disk?

  I don't so much mind the error message. It's the loud beep that alerts you when this message appears. I tried to disable the sound by all means possible and it has not yet stopped. In addition, told me that changing the boot order would stop the error message, but when I went into the settings, boot order was very good. It really starts to annoy me. Need help as soon as POSSIBLE!

  Hello Holden,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. What is the full error message when you say, "no system boot disk error?
  2. What is the brand and model of your computer?
  3. have you made any hardware or software changes to your computer recently?

  Because the boot order can be changed, it is possible that the computer accesses a no operating system disc in the optical CD/DVD drive. Follow the steps below to remove all the non-system drives and restart the computer.

  a. disconnect all USB or 1394 (Firewire) devices that are connected to the computer.

  b. remove all drives CD and DVD readers.

  c. press and hold the "Power" button for 15 seconds to turn off the computer.

  d press and release the "Power" button to turn on the computer.

  I hope this information helps.

  Simply answer the required information and let us know if you need more help.

  Thank you

• Non system disk or disk error, replace and strike any key when ready

  I bought a new laptop yesterday. I tried to install Windows XP Professional. When I put CD performance system, the error message "not-system disk or disk or error, replace and strike any key when ready."

  Please solve the problem.

  Kind regards
  Bilal T

  Hello

  If this is a new laptop, chances are that there is no available for this purpose XP driver to make it work correctly with XP.

  Web site of the manufacturer of the laptop computer to check for the XP drivers for your laptop model.

  If no driver is available, you're wasting your time trying to install XP.

  If the XP drivers are available, here's how to install XP Professional;

  http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

  See you soon.

• Satellite 1700-300: Win ME - invalid system disk - ERROR F3D failed

  Hello

  I have a Toshiba Satellite 1700-300 on windows Millennium Edition. Haven't used for a few years, but when I'm past it the other day the screen says: invalid system disk. I put in my laptop recovery disk, but he cut in halfway through with the message: ERROR F3D failed.

  Not really sure what I'm doing and really can't afford a new!

  Help would be thank you very much!

  Nice discussion on this error, you can find on http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=1255

  To be honest, I also think that there is a problem with the HARD drive.

• Malicious software removal tool and system disk errors

  I ran a full Scan with the MRT tool last night and noticed that there are a bunch of disk errors in the observer of events during the same time period. Is there a reason that this may be the result of the analysis? Running the disk errors and tool MRT in Event Viewer.

  Disk errors can be supported if it is a simple configuration problem,

  But if its due to "bad sectors" on the hard drive, then the hd is a failure. Or the other

  for example, to chk on the hd & fix, go to run, type: cmd cmd, type:

  CHKDSK C: /F agree to restart, type: EXIT restart pc... The disk check

  work on restarting the pc, once he finishes, look at the data "bad sectors", if its zero, then

  you are in ok shape...

• Win 7: how to pass message Non system disk during startup?

  Hello

  I was updating my PC on the site of the OEM. I downloaded and install two Seagate firmware.

  After that, whenever I start my PC, no system disk, please strike any key to continue spell before the start of Win 7.

  May I ask why? Is it because this firmware is not for my hard drive?

  Can I uninstall the firmware, it is very risky to cause more problem?

  Any way for me to move this to Direct Win 7 boot?

  Next time I'll be more careful during the installation of the drivers of the OEM site.

  Thank you

  Low

  Hi there,

  You can enter the boot order in the BIOS and change the Boot order to hard drive as the first boot device.

  You may need to change your computer's BIOS settings.

  Important: Change the BIOS (Basic input output system) / Semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  For more information, see the article:

  BIOS: Frequently asked questions

  You can also get in touch with Seagate support and look for the same thing.

  Seagate support

• HP d530 - unrecognized HARD drive, "Non system disk or disk error"

  Greetings,

  It is a computer from a friend. It seems that he has lost the CD or diskettes shipped with the computer. I see that recognition of HARD drive does not seem to occur in the SETUP (BIOS), so I guess as a floppy disk or a CD some is necessary.

  Only startup options that are currently available are:

  CD-ROM

  USB

  Floppy drive

  No hard drive recognized. I was able to boot to the CD-ROM drive with a Linux LiveCD, but it also confirmed that no HARD drive is recognized at the time. I guess it is possible that port IDE 1 is dead.

  I have tried to reset the CMOS operating in SW50 5 seconds, but that has not helped to recognize the HARD drive.

  The model number is:

  HP d530

  SFF (DC578AV)

  p/n DC578AV

  Restore XP on this machine would be the best option, but if I can get the recognized HARD disk and install a version of Linux, it would be OK also.

  Thanks for any help,

  Doug

  Assuming that the hard drive is on a different IDE channel as the CD drive, try swapping them.  If the CD is always considered and the hard drive is not, it would make sense that the hard drive is faulty.  If the Linux Live CD can not see the hard drive after the Exchange, a sign that it's done.

• non system disk or disk error

  someone help me please fix my laptop

  Need a little more information please. type and model would be nice and what was going on when it happened. This could be the cause of a few things.