Portege 700 Jumping cursor and liquid on screen

Similar Questions

• Jumping cursor, sporadic and touchpad doesn't work does not correctly for HP envy 15

  Hello

  I had my HP ENVY 15 t-q100 CTO Notebook PC in September 2014. It has 8.1, 64-bit Windows. For the first few weeks of use, I don't have any problems. Then, I started having occurrences more problems of cursor/touchpad to the point where it happens all the hours of use (not a problem of external mouse):

  Jump around on the screen (a few millimeters in inches).

  Move per increment on its own without me anywhere near the laptop (usually spazzes left).

  Does not allow scrolling functions / normal touchpad when problems are happening.

  Works as if I am holding down the click button while I try to move it - mostly frustrating when I make the important work.

  At random click things that I try to move it.

  Here's what I tried to do to fix this and did not work:

  Roll back the driver (did not work).

  Update driver (no update available).

  Reset the device (works for a minute or two).

  Reboot (I do it everyday anyway).

  Reduce the speed of the cursor and other mouse options offered online.

  I've seen similar problems for the HP Envy 17 and other laptops, but no real solutions have been proposed. Please help me with this problem.

  In January 2015, I received by mail, a brand new Envy 15 t-q100 purchased HP's official website. Packaging and the laptop is here Mint (aesthetically speaking). That being said, I had the exact symptoms described in this thread since the first day. With a replacing synaptics driver, I was able to stabilize the mouse enough to effectively use the tool 'curve of pressure. " Then, I determined that it was in fact a hardware problem. I noticed that from time to time, the "animation" icon would indicate that pressure is applied even if I wasn't touching the laptop. If I applied pressure by pressing or stirring on the basis of the Palm, would stop the pressure indication and use mouse returns to normal. However, this problem gradually went from bad to worse, and finally the touchpad does not have all together. Firmware and BIOS flashing helped before, but has been either nothing change.  I debated on referring to HP for repairs under warranty, but after having to wait a month to get this unit in the first place, in addition to reading all these horror stories of people coming back a semi destroyed unity and always faced with the same symptoms, I was ready to fight against myself. so, I found a source replacement nine track want pads 'zone of control '. Ninety-nine percent sure that I had a defective keypad, I bought P/N "761210-001" to "parts_direct101" for $59.95 ebay seller. Disassembly, I discovered that one of the screw mount for the pad was loose (this may have contributed to the problem). I decided to replace the pad in any case. Finally. No more glitches. After months of experimentation and reading these forums, I have now a mouse working 100%! It's been more than 2 weeks now, since I replaced the touch pad and still no problems! I use my laptop 3-4 hours per day. I always use the synaptics driver installed replacement from "dpinst.exe" found in the x 64 folder downloaded directly on the website of synaptics 'uncompressed'. I have not tried to update with windows update again. Just happy to finally have a mouse to work on this beast of a machine. I'll keep you all posted if this problem will never return. With regard to the absence being automated support generic responses to "Customer Service" aka HP, I guess HP has accidentally put on a bad batch of caterpillars and they simply cannot 'afford' parts, labour and logistics to issue a notice of recall of this magnitude! Unfortunately, this laptop must be completely disassembled to replace the touchpad. I would NOT recommend this fix if you feel that it is beyond your skill level. Instead, call the HP technical support and insist that you have received a unit with a defective keypad. I hope this helps!

• Windows 7 Pro black screen with cursor on all modes and no login screen

  OK so basically, it's how, my laptop decided to me-screw right when I need to make some adjustments to my final project for next week.

  Friday he started very well in class and at the end of the course at 6:30, I stopped him. I normally don't that often stopped because I usually find myself opening upward in an hour later. But I did this time and when I got home and turned on around 9:00, it started like this:

  Screen Compaq PhoenixBIOS > Windows boot animation > black screen with cursor mobile, no login screen

  No screen connection. No sound. Not nothing but a black screen and the cursor movement. So I force shutdown and turned it back, this time he asked a chkdsk and I ran it. A ton of stuff file unreadable came and it took all night to run through it all. Tried to start again and Windows Error Recovery came and I tried all Modes of security and start normally and all produce the same black screen and the cursor with no login screen.

  Then I used my Windows 7 dvd repair to try and system restore to a week before. That's where I noticed that windows had installed a critical update at 12:00 on Friday. Tried to restore before that, but he failed. Gave me an error 0 x 80070057 and said I should run chkdsk /r and then try again. Then I used the cmd prompt through dvd repair and he has seen all these things wrong file again once recovered things then realized hours later. Tried to restore the system again. Still the same error. A run chkdsk again through the cmd prompt, then he went to clean without errors or orphaned files or anything, but it took a lot of time. I used the Startup Repair, and he has not found anything wrong either. But still the same error the system restore.

  So I looked around online for the last two days, trying to figure out and that someone said to try CTRL + Alt + Delete, the sticky shift key thing. So I tried to boot the system again, same black screen with cursor movement. I did CTRL + Alt + Delete, nothing. Press and hold the SHIFT key, and a pop-up window asked FilterKeys. Press the SHIFT key 5 times, a popup asked about sticky keys. But that's all I can get it to do. Nothing else. I tried to boot into safe mode with F8, chose, each of them and that changes in screen resolution and the words "safe mode" in all the corners of the screen. If the repair dvd's while I start in safe mode, it will open as well in safe mode, but with the same black background mode. Tried running sfc/scannow through repair invites cmd of the dvd and it says a system repair is pending and he had to restart, and then run the sfc/scannow. Tried, but it doesn't do anything when I restart except go to Windows Error Recovery asking either start in any safe mode or normally. And then it's just black screen again.

  So I am at a complete loss what to do now. After all of this mess, it seems that this Windows Update Friday afternoon did something and when I booted it upward once again, his cause nothing but problems. I think it has something to do with the display and the graphics card drivers? It's as if the thing starts but I do not see anything either because the sticky keys appears, but sees nothing else, no matter what I do. Seriously, I don't want to this junk because this is a new hard drive and I was just able to retrieve my files from my old hard drive that had epic failures as well. And I just got this new specifications I wanted as well.

  Laptop Spec:

  Compaq CQ50-115nr
  OS: Windows 7 Professional
  HARD drive: Western Digital Scorpio Blue 320 GB SATA WD3200BEVT
  Processor: AMD Turion X 2 RM-70
  Graphics card: NVIDIA GeForce 8200 M G
  Memory: 3 GB RAM

  If someone could seriously help me I would be VERY happy.

  Hello

  This isn't good news.

  --------------------

  STOP: 0XC000021A

  Can be a difficult problem to solve, and you indeed need a technical help in a real store of the computer
  (not the leeks and the glances at a BestBuy or other BigBox stores) or system manufacturer support.

  Cause

  This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.

  Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.

  Solve the problem

  Run the kernel debugger is not useful in this situation because the error occurred in a user mode process.

  Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.

  If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.

  Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.

  Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.

  STOP: 0XC000021A<-- read="" this="">
  * 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A-

  -----------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  It's my generic bluescreen convenience store - you can try Mode safe mode as suggested in article
  above - repeatedly press F8 that you start. Disks of Vista are probably necessary - if you do not try to repair it, you can borrow a friends because they are not protected against copying. You can also buy the physical disks
  good system machine cheap that you already own Windows (you have to reinstall them if)
  required). You can also repair disks on another computer.

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Desktop does not - black screen with the cursor and access to Task Manager

  Well, I played recent MMO and to do this, I had to update my sound drivers and graphics. I managed to finish my first uninstall all the old drivers-flawless and it worked perfectly thereafter with no video issues (that I had before the uninstall, but nothing harmful to the system). Eventually however, I started to get some pop ups Windows 2008 C++ REDIS saying that atieclxx.exe had asked to be terminated in an unusual way. No problem, I close the error message and everything always works as it should. No random crashes.

  My problem is that wermgr.exe (I am fairly certain that this is the title, but I did not work right now), began leaving me with a black screen and the cursor when I connect. In most cases, I can open the Task Manager by pressing Ctrl + Alt + Delete, however, it sometimes won't start, and when I start to kill unnecessary tasks, they take some time to die. I know that black screens are often a defective start of explorer.exe, which manages office and file, browsers so I use the Task Manager to run it and it dies or continues to do nothing without making the office. Whenever this happens, wermgr.exe was running (Windows error handler). When I kill this task, which often has duplicates, I can finally get explorer.exe to load. I have the same problem with safe mode, except that the display shows the version of windows and the details in each corner until explorer.exe load finally. I've also had freezing issues long whenever Werfault.exe jump upward and the only thing that those fixed has been disable Werfault.exe in the services menu.
  It is clear to me that the windows error reporting programs consume a lot of the capacity of the CPU of my computer and they are probably the source of the biggest problems I'm having. I should stop start, or they are just neutral, awakened by a bigger problem?
  On a smaller note, C++ error is probably due to me not having is not the correct edition of the redistributable C++ installed, or perhaps too many distributions. The last edition, I have installed is 10.0.40219 of the x 86 and x 64 redistributable and runtimes (2010). Are the oldest, I installed some updates ATL and 5 2005 Redistributable (2 x 64 versions). Atieclxx.exe is the program having the pop-ups demand 'unusual termination. " The version of my ATI Radeon drivers are included in Version 2012.1116.1515.27190 of the AMD VISION Engine Control Center.
  Now, finally, I think it's useless, I'll give you my specs:
  OS: Windows 7 Home Premium, 64-bit
  Processor: AMD Athlon TF-20, 1.60 GHz
  RAM: 3.00 GB
  Model: Acer Aspire 5534
  BIOS: InsydeH2O V1.12
  Graphics card: ATI Radeon HD 3200, using aticfx64.dll and aticfx32.dll
  I do not believe that a reinstallation is necessary, because I got my computer in good enough condition that I can write this message and use it as usual, however, it's a nuisance to do, because it requires waiting a few minutes while the wermgr.exe process is stopped by the Task Manager.

  HiJack This help "fix selected", I removed the SmartShopper and BHO entry no name, as well as a few more suspicious looking files and those to the left of the old installs (windowblinds). I also deleted all entries in ø16 because I didn't need them and didn't like their operation. Then, I deleted two mistakes of R3, who looked extremely suspicious.

  IT'S FIXED NOW!
  I restarted and connected to be greeted with my office. The second csrss.exe is still underway, and atieclxx.exe works well as well. Although they appear to be the cause of the problem, because I am intimately familiar with the process of my computer, it is also clear that many of the comes from problems of registry and the programs that I have only half managed to uninstall. I hope this helps people to the problem in the future, and if my problem recur soon, I will return to this article with more information.
  As a final note, I was extremely impressed with HiJack this, because I used it for the first time in order to solve this problem. He kindly explained to me why he alerted me and what kind of problems listed that would cause a lot of things helped me to decide what to remove. Now I know why divert this is recommended everywhere on the internet as a diagnostic tool.
  To not appear as an advertising bot, but it's the tool that solved my problem for this, I have it suggests. in any case, good luck and I hope you can fix this problem yourself. With the help of google, an open mind and careful decision making, it is possible to solve anything. I do not recommend using a shotgun to do so ;)

• MacBook pro 2 logon screen starts with no arrow cursor and must be restarted

  2014 Macbook Pro screen Retina 2 13 "opening session starts with no arrow cursor and must be restarted once every five tests.  When the computer reboots, message appears asking you if it must open programs that had started to load or cancel.  It is a recent problem that does not occur two months ago.  Once restarted, everything seems to be OK.  That is what it is?

  Try the start mode by holding down the SHIFT key at startup. Secure boot is quite slow because the operating system performs some cleanup and verification tasks, so give it time. Once you're completely connected, restart normally.

• Cursor moves on the screen and without entrance music will start to play

  I have two dell - a desktop and laptop computers. We have ATT uverse service of broadband ISPS. My phone receives the signal of a wireless router. Several times, I looked down my laptop and noticed the cursor "darting on the screen. In addition, on occasion, without any input from anyone, audio advertising or music started playing. I have McAfee security and my wireless signal is supposed to be encrypted. Have you ever heard such a thing? It's a little scary!

  Original title: WEIRD ACTIVITY

  Hi, Bandaid99,

  To rule out malware, download the following tool and run a scan complete

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16

  (1) is the own mouse?

  (2) is it a phone, cell phone, or come close to the mouse?  Their distance.

  (3) is it the humidity or lotion on your hands when you use the mouse?

  (4) the drivers are up to date?

  (5) can you test with another mouse?  Disable the touchpad and start again with the mouse.

  (6) open the Device Manager and uninstall the mouse driver.  Restart windows

  Right click on desktop

  Select customization

  Select the mouse pointers

  Uncheck the enhance pointer precision

  Click on apply, Ok

  Retry using the mouse

  When you hear the sound, you have a page (s) open where the sound may come from ads on the page?

  Update using Device Manager sound card drivers

• When you tap on my new laptop, the cursor jumps around and letters are places in the words entered previously.

  New laptop yesterday. When you type, the cursor jumps back and letters are placed in the words entered previously?

  original title: keyboard probkem

  wendyjjll,
  Thank you for visiting the Microsoft Answers community forum.

  Most likely, the problem is due to the sensitivity of your touchpad.  Whenever you type, your thumb probably affects the touchpad with the cursor to another location where you type.  You can set the sensitivity of your touchpad, or turn off the tapping by going into settings start, Control Panel, mouse and keyboard.  If it is not under that, the manufacturer of the laptop most likely installed custom software to control the touchpad.  Let us know what kind of cell phone, brand and model, and we will be able to help you.

  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why my screen jumps up and down unexpectedly in Vista?

  my screen jumps up and down even if I do not use my mouse. When I try to set the screen from left to right, it slides to the left again once he will not stay in place.

  Hay thank you very much for your help, but the laser mouse was broken.

• black screen and nice white cursor and Ctrl alt del will not work, I can not update shell

  black screen and nice white cursor and Ctrl alt del will not work, I can change the shell to the Explorer, but I can't unload or load the hive, what should I do?

  Hello

  Your question I know that some of these methods is not available now, however, all
  Convenience store is included just in case where win you some access as you try to solve the problem.

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows Vista installation disc: Black screen with a cursor and then nothing happens

  A blue screen appears when I try to start Windows and I'm trying to fix the computer through my installation disc I have. But when I try to run my Vista disk installation happening by loading the files fine. It then shows a black screen with a mouse cursor that moves. After that, nothing happens even if I leave it for hours to sit. It is a real disk Installation of Microsoft for Vista.

  If a clean installation of a real Installation of Vista disc does not work, then you probably have some kind of hardware problem (and the blue screen, you got before makes this even more likely).  You can try to do some troubleshooting on your own hardware, but frankly you probably put "t have tools or spare parts to do very much.  Here are some instructions that may help:http://elephantboycomputers.com/page2.html#Hardware_Tshoot.

  If this does not work, then I suggest that you take it to a repair shop of computer with a good reputation for the service where they can troubleshoot, diagnose, identify and possibly repair or replace the problem.  Before you import it in, I suggest that you protect your important data, as it is likely that they will wipe the hard drive clean in the process.  You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD.  This should hopefully give you enough access to the system (if you do not have any other means) to backup your important data.  Otherwise, slave the drive to another computer and copy the data in this way.

  I'm sorry, we can not help more, but from your description there is no option of software if you do not have to do a clean install of an Installation of Vista genuine disc.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 7 screen freezes, freezes mouse cursor and keyboard freezes.

  Hi all

  About a month ago my internet kept cutting at about 02:00 in the afternoon - even if my BThub said it was a signal - and my internet access would not return until 05:00 sharp later that day here. This went on for about two weeks, it doesn't happen too much now, however, recently, something happens...

  I have a desktop HP Pavilion s5000 and all day - every day - not only freezes my screen, if I'm online or simply type in a Word doc, but my mouse cursor and keyboard freeze too, all at once. It's as if all of the computer crashes, and the only way I can "unfreeze" it is cutting off the entire batch to the switch. In this case nothing three times a day to ten times a day. Can someone tell me what could be the problem and how I can try to solve it? I did a system restore, to restore the PC to a date earlier, I did this about five times now, but the problem persists.

  Many thanks in advance,

  Danni.

  Hello Danni,

  Thank you for reaching out to us to the Microsoft Community Forum.

  When your computer hangs or freezes, it is disruptive and can slow you down. There are a few reasons your computer might hang, freeze, or crash. Try the following common methods provided for in article below as a first step to solve the problem.

  8.1 Windows, Windows 8 or Windows 7 hangs or freezes

  Note:

  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Also as you use HP computer, you can try the troubleshooting provided in the link below steps and check if that helps resolve the issue.

  Computer hangs or freezes (Windows 7)

  Note:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Important:

  In case you follow ' step 7 "in the above link from HP that speaks to recover the computer to factory settings then you will need to contact HP support and we also recommend that you back up all important data to an external drive before recovery of the computer to the factory settings.

  Hope that the information provided will help you. Do we know the State of the question, so that we can help you further.

• media, stops and starts with the cursor movement on the screen

  When you watch a video on Youtube or any media file on the internet, it plays very well, then stop so he could continue to play I move the cursor on the video screen, as soon as I stop moving the cursor, it will continue to play and then stop again.
  In other words if I want to display a media file I need to keep the mouse move the cursor over the corner of the screen of media.

  I have no problems with playback of multimedia files stored on my computer. My operating system is Windows 7

  I hope you can help me

  Hello Craig Barnett.

  Thank you to contact the community Microsoft and we will be happy to help you with your concern.

  According to the description, it seems that you are having problems with online videos don't play do not.

  Perform the steps from the link if you have Internet Explorer and check.

  The video problems when you use Internet Explorer

  Answer to us if you are experiencing problems with Internet Explorer or any Windows problem, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• NB100 - mouse cursor flies around the screen

  Hello

  So, I bought the NB100 and noticed that something was not right but stupidly put upward with her for over 2 years. Now he is just really annoying as its happens more frequently and, possibly, gets worse!

  Randomly, the mouse cursor flies around the screen, by clicking at the opening programs and files, etc. The only way to stop it is to turn off the laptop holding down the power button. She also does when I plug in a usb mouse (and disable the touchpad) so I assume that it is not the hardware, but I have reinstalled as the driver...

  Usually, if I turn the laptop on its always crazy but if I start it in safe mode its fine. This made me think I had a virus but I did a scan and nothing shows.

  In addition, I don't think that turn it off by holding the power button down is very good for the system that sometimes, when I try to turn it back on, it doesn't load at all (just a black screen with the cursor).

  Help, please! I would be eternally grateful...

  Thanks in advance, Nadia

  need you pretty much time to fix. My advice is to reinstall Windows from disk image or hard drive recovery. Please, understand me, it's easier and quicker to reinstall rather try to fix it.

• Window front jumping up and down (LabView 2010 SP 1)

  I have a bug problem with dynamically opening and running a VI.

  The VI below is compiled into a DLL:

  

  With that, I opened a secondary VI to display the results. That VI is called multiple times in a loop. It works fine, but I was annoyed by the flashing of the menu bar and the toolbar. That's why I added the 'FP. ShowMenuBar' and 'to. Visible' to hide those. This causes the Panel window before jumping up and down on my screen. Is this a known bug (I presume it is) and is there a work around?

  One other minor annoyance is that open the front panel, close it and then open it again cause the façade to be open in the background, and I have to manually move it to the foreground. I thought it might be remedied by adding "FP. IsFrontmost', but it does nothing.

  OK, I did the VI reentrant and added the option "prepared for reentrant run" in the box "open VI Reference. This is the VI opened as a clone and stop the blinking of the menu and toolbar.

  As a bonus, the CPU dropped load. (But I do not see why).

  The façade positioning mind again, but did not understand.

• cursor is frozen Mid-screen,

  I have Window XP Pro, went to work when I went home and tried to check my email that the cursor is frozen mid screen, I uninstalled and reinstalled each device and driver, that I can think of but I get error 41 any mouse I plug it will not find the device. What can I do?

  Info web ms

  Code 41

  Windows successfully loaded the device of this hardware, but driver cannot find the hardware device. (Code 41)

  Recommended resolution

  This problem occurs if you install a non-Plug-and-Play device driver, but Windows cannot find the device. Here are some things you can try to solve this problem.

  If the Troubleshooting Wizard does not resolve the problem, do one of the following:

  • If the device was removed, uninstall the driver, connect the device, and then click on Search the hardware changes to reinstall the driver.
  • If the material was not removed, the driver files may be obsolete. In this case, update the driver in Device Manager. In the device properties dialog box, click the driver tab, and then click put to update driver to start the Upgrade Wizard to update the material. Follow the instructions to update the driver.
  • If the device is a non-Plug-and-Play device, you may need to install a newer version of the driver. To install non-Plug-and-Play devices, use the Add Hardware Wizard. Click Startand then click run. In the Open box, type hdwwiz.cpl.