Portege 7020 bios upgrade problem.

Similar Questions

• Portege R700 Bios update problem - this computer is not supported

  I tried the update for Portégé R700 Bios with Toshiba Service Station and by downloading the exe of the bios.
  Both say that "this computer is not supported", but the downloaded bios file is correct.

  What should do?

  Hello

  Go to the page European driver Toshiba and download the BIOS package manually.
  Unzip the BIOS and try to run the exe file once more

  But why you need BIOS update? Have you noticed a few problems with the laptop?
  BIOS update is not required if you don t have problems.

• Satellite U400 - 112 (PSU40E) - Safe BIOS upgrade - SOLUTION

  Dear all,

  Trying since long upgrade for the bios of my laptop favorite... Toshiba Satellite U400-112 (PSU40E)
  I have Windows 7 Ultimate (64-bit) English and BIOS version 4.00(until yesterday).
  The problem was that, in windows 7 (32 & 64 bit), the tool flash never started the process of update due to several incompatibilities.
  There is a solution (in fact a workaround solution) to be honest and works 100%!

  My solution is:

  (A) download the latest bios upgrade version appropriate for your laptop, save it (tomake it is easier in the root of the C:\ drive) and unpack it in a temporary folder (for example: bios).

  (B) use the Hiren's Boot CD a real support from a USB or CD (download and burn a CD or follow the process of CD copy on a USB key).

  (C) boot the laptop from the CD or USB flash and in Hiren's Boot Menu, select the version of mini Windows XP.

  (D) allow completely Windows XP startup and then run the tool to update the bios flash from the temporary folder. The update procedure make it exactly as it is described in the manual of the bios update. (If you are not experienced)

  (E) it will update the bios, and then he stops himself. Then you can start normally your operating system, remove any CD or USB key mounted on it.

  I hope you find it helpful and convenient.

  Best regards

  Ioannis

  To be honest I updated the BIOS on my U400 (running Win 7 32 bit), A210 (Vista) and Tecra A10 (Win 7 64 bit) using the victory as the BIOS version and never had any problems in running the tool
  Anyway thanks for sharing your knowledge with the community

• Satellite Pro 4340 - RAM upgrade problem

  I have exactly the same problem as Juan29. Link to his post below.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15837&MessageID=57907

  I want to improve my Toshiba Satellite pro 4340 to 320 MB of ram.
  The computer came with 64 internal RAM and I bought 2 x 128 MB of ram.

  My problem is that the second (B) ram slot does not detect the new ram.
  2 x 128 MB of ram were tested both in the ram slot (A) and work.
  I thought that a bios upgrade would solve the problem, but it didn't.

  I have the same defective (B) housing like Juan or does it have
  a solution?

  Help, please.
  Best regards
  Martin

  What memory did you use?
  I've found that these modules are compatible:
  PA3003U - 1 M 03 32MB MEMORY KIT
  PA3004U - 1 M 06 64 MB MEMORY KIT
  PA3005U - 1 M 12 128 MB KIT MEMORY

  I think there could be a problem of compatibility of the module.
  I put t see any other reason the problem

• BIOS upgrade

  Hello

  with my HP250G3 I can not restart or shut down in linux OS, but in Windows works properly.

  Linux is not recognized BIOS, another user risolved this problem with the BIOS upgrade.

  You can write me a correct link?

  There is nothing on the support center...

  Concerning

  It's WORKS!

  In the bios should define USB 3.0 on ACTIVE, not AUTOMATIC.

  

• Self Extracting BIOS upgrade fails

  I have a Pavilion 15-n096ea with the original BIOS.  I think that sp64555 is the upgrade of the BIOS for this.

  The downloaded file works on Windows and can either upgrade the BIOS, create a bootable USB drive that upgrades the BIOS or just put the BIOS firmware on disk for future use.

  I went for the second option because I can't use the first because I am not running Windows on my laptop.

  My problem is that if I create the USB bootable on another laptop (not HP) which is running Windows 8.1, sp64555 seems well and told me that the USB was created and to insert it in the correct computer and restart.

  However, when inserting it into my house, I tells me that the USB drive is not bootable.  I tried this with 3 different stick, which one had a top first bootable filesystem I tested to work.  That, to me, shows that the Pavilion and the USB key work properly, but the image created by the download may not correctly create the USB.  I tried to create the USB for Windows XP also, but the software has not found the USB key.

  I'm doing something wrong?

  Just for the closure.  I ended up saving all of my work on an extrnal-hard disk before you reinstall Windows 8 on the laptop in order to apply the upgrade of the BIOS.  Which had been applied once, I reinstalled Linux on the laptop and restored the files.

  Work a day of total to see that upgrading the BIOS does not resolve the problem, I had in the first place!

  As the upgrade procedure. I noticed that with Windows installed, gave me the option of updating the BIOS from the menu of boot UEFI (ESC key at startup).  I think there's some added additional UEFI software when it is reinstalled Windows on the laptop which is used to upgrade the BIOS.  There is also choice was diagnosed with additional system in the menu too.  When I installed Linux, I chose to delete the Windows UEFI system partition and in the process lost the BIOS upgrader and diagnostic tools.

• Oops! Aspire Z1620 - UR31P BIOS upgrade - Windows 10

  It's 'oops' as in, oops, when I upgraded my Aspire Z1620-UR31P (Windows 7) and Aspire E1-732-4651 (8.1 Windows) Windows 10 I have not noticed the asterisk Acer community important: "Please make sure that upgrade the BIOS before upgrading to Windows 10." Because of installation - especially with the unit Windows 7 problems - I was forced in one installs own for both machines. So, as discussed on this forum, when you perform a clean installation of Windows 10 a key product already is located in the BIOS and is read from the BIOS by installing Windows 10 and authenticated to the first connection by the web. Considering a digital facility right I guess it's too late to follow the BIOS upgrade alert, because I'll lose 10 Windows activation. Am I wrong?
  At the moment the two machines operate smoothly with Windows 10, but unlike the E1 the Z1620 fails repeatedly to accept the first update Windows 10 major: "Upgrading to Windows 10 Home, Version 1511, 10586." Two-thirds in the update comes a blue screen hang up, requiring a hard stop, failure to automatically restore the update, and finally an automatic restoration of the earlier Windows 10 build after the message: "error updating Windows 10 0xC1900101 - 0 x 40017. Installation failed in phase SECOND_BOOT with an error during the START operation. »

  You should be able to upgrade the BIOS, even if this first version of Windows 10 is already installed. The Windows key will remain during the upgrade of the BIOS.

  How much space you have on the C drive? It is possible that the upgrade of 1511 fails with an out of space error... They are quite cryptic with error codes.

• I'm moving from Vista to Windows 7. I get a question that tells me that I need a BIOS upgrade. I have an Inspiron 1720 laptop model. Is there a way to find the update is necessary?

  I'm moving from Vista to Windows 7. I get a question that tells me that I need a BIOS upgrade. I have an Inspiron 1720 laptop model. Is there a way to find the update is necessary?

  original title: bios update

  Hello

  you have a problem here as Dell does not have Windows 7 drivers available for your model of laptop etc, etc.

  Unfortunately, you need these Windows 7 drivers, etc. to upgrade to Windows 7

  read the information on your laptop on the link below

  http://support.Dell.com/support/downloads/DriversList.aspx?c=us&l=en&s=Gen&OS=WLH&OSL=en&SystemID=INS_PNT_PM_1720&CATID=-1&impid=-1

  For more information contact Dell about this

  Dell support:

  http://support.Dell.com/

  Dell support at the link above.

  http://en.community.Dell.com/support-forums/default.aspx

  Dell's Support Forums at the link above.

• Dell XPS 13 stop during sleep after bios upgrade

  Recently updated my BIOS Dell XPS 13 L321X-the worm 8. Since then, whenever I close the lid and put the laptop to sleep for several hours, the processor seems to come and the backstory is very hot. When the cover is opened, the screen remains blank and no wake mode 'sleep'. The only recourse is to make a hard stop with the power button and then restart. The laptop restarts then black screen troubleshooting, or select the normal startup of windows. Since then, I tried to update all the drivers, but still no luck. He continues to run hot and won't start after placing the phone in sleep mode.

  Any help is appreciated!

  Divider ~.

  Thanks for the quick response!

  To review, my problem started when I updated the BIOS to ver. A08. Before reading your solution, I ended up flashing my BIOS downgrade - worm. A07.

  I started a series of applications and then closed the lid, let go in mode "Eve". After a long period of time, I opened the lid and the wake of the computer normally with no issue. No screen cases, no empty overheated. And not need a hard stop and restart with the power button.

  Hope that this remains the case, I will record your steps suggested in case reports of problem, but so far, it seems that BIOS upgrade vA08 was the problem and a reflash with v A07 was the solution.

• Portege M100 BIOS supports more than 128 GB of HARD drive?

  subj

  Portege m100 BIOS does support HDD > 128 (137) Go?

  What IDE controller has been integrated?
  You could install a tool of diagnosis of equipment as Everest home edition and could check your hardware specifications.

  But I guess the protégé M100 supports South Bridge Intel ICH4 - M and the IDE controller must support the Ultra ATA 100/66/33

  However, you must still install these diagnostic tools to ensure a what IDE controller has been installed.

  The fact is that since ATA - 6 (also known as Ultra DMA/100, Ultra DMA 5 or Ultra-ATA100 mode) the 48-bit LBA is supported which allows to use more large 128 GB drives

  Good bye

• Portege 7020 Setup Help - where can I download the drivers

  I have a laptop Portege 7020 I formatted the hard drive. I have a copy saved in Windows 98 SE and I installed it on the computer. I need the diskette and the drive of the tools. As said I have the OS if someone can tell me where I can download the disks above or could sombody e-mail the information to me at the [email protected]
  (In anticipation) thanks for any help of advice.

  Paul...

  Hello

  See this page from Toshiba:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• Tecra 540 - BIOS upgrade?

  I am the owner of Tecra 540.
  Details:
  Tecra 540CDT/4.0 system UNIT; Z7013615 model number.

  I just downloaded the latest BIOS for this notebook (bios - 20071126170622.zip)

  Two files inside:
  CHGBIOSA. EXE
  BIOFCE7T.COM

  Now I'm looking for a way to Flash the BIOS. This machine has a floppy but CD player.
  I was looking at the Toshiba site where 'How-to' for upgrading the BIOS is described for one of Toshiba laptops, but not my :(
  IOS http://eu.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?z=234&service=eu&from=faq_selection&CFID=B & FID = TRO0000000b07

  Can you get it someone please let me know what steps I have to upgrade the BIOS more recent?

  Hello

  On the page of the driver Toshiba Tecra 540 section, you will find two packages of BIOS.
  A package 8.00 - TRAD BIOS contains an exe BIOS Tecra 540 and some pdf documents that described how to upgrade the BIOS.

  In addition the document FAQ Toshiba + how to upgrade the BIOS on my Toshiba laptop and where can get the latest version of the BIOS for my machine? + provides a step by step instruction.

  Please check this last point * the 7 BIOS upgrade procedure *.

  It is said:
  For all models except those listed in the procedures (1, 2, 3, 4, 5, & 6)
  So if your model is not in the procedures at the beginning then you will have to use the last procedure 7

• Re: Need Satellite 1800-804 - BIOS upgrade

  Hello!

  I would like to know where I could find the BIOS upgrade?
  I updated Win Win XP.

  Hi Aki

  You can upgrade Windows ME to Windows XP without updating the BIOS!

  The update of the BIOS would not affect the installation of Windows XP.

  Perhaps an important fact is not known to you;
  The update of the BIOS is always risky and should ONLY be done to fix some bugs.

  In your case, it seems that you want to change only the operating system and therefore the update of the BIOS is not really necessary on your Sam 1800.

  Anyway, if you looking for XP drivers then you might find it on the page of the European driver Toshiba-> * area of ARCHIVE

  Best regards

• Satellite 1130 Z24 BIOS update problem.

  I have download the proper file, but saves it as tw30170w.rom. How do I run it? Windows does not recognize it.

  Brian

  Hello
  I would try it with the traditional Biosupdate.

  Download bios here-> http://eu.computers.toshiba-europe.com

  Watch "Support & downloads", click on "Download Bios" a choose your model

  How to upgrade the BIOS

  Satellite 1130

  1.) extracted the zip file containing the BIOS upgrade to a temporary folder.
  2.) insert a 1.44 MB diskette formatted in the floppy drive.
  3.) Execute the file *.exe extracted to the temporary folder. Follow the instructions on the screen. A BIOS update diskette will be generated.
  4.), make sure that the laptop is plugged into the sector.
  5.) turn off the laptop.
  6.) place the floppy disk containing the BIOS upgrade in the floppy drive.
  7.) turn on the laptop with the F12 key.
  8.) the BIOS boot menu appears. Select 'Removable Device', 'USB Floppy Drive' or the diskette symbol using arrow keys. Press "enter".
  9.) the Notebook will start from the BIOS upgrade diskette.
  10.) the BIOS update will start automatically.
  11.) after a few minutes the laptop turns off automatically, remove the disk and do a restart. If it does not then remove the disk and turn off the system and return to restart the laptop.

• Need info on BIOS upgrade on Satellite Pro 6100

  Toshiba said for the upgrade of the traditional Bios use the key"toshisba" to the left of the space bar to the 6100, I tried this nothing happens
  The 6100 does not turn on with this key, so the news of Toshiba was inncorrect

  And how risky are Bios upgrades running Windows

  everyone updated the 6100 to worms 1.9? That's what I want to do
  to stop this annoying missing USB

  Jack

  Hello

  No, I don't think that it is more risky to have the upgrade of the Bios from windows then the traditional way.
  I found this info in the Toshiba document that describes the procedures to update the BIOS:

  For the current offers in the range of Toshiba laptops two different BIOS update procedures.

  1 Windows base update: BIOS is updated to Windows.
  2. traditional update: BIOS is updated using a floppy disk or a CD-ROM when starting.

  We recommend that you update the BIOS from Windows.